Identification of genetic factors controlling domestication-related traits of rice using an F2 population of a cross between Oryza sativa and O. rufipogon

 Domesticated rice differs from the wild progenitor in large arrays of morphological and physiological traits. The present study was conducted to identify the genetic factors controlling the differences between cultivated rice and its wild progenitor, with the intention to assess the genetic basis of the changes associated with the processes of rice domestication. A total of 19 traits, including seven qualitative and 12 quantitative traits, that are related to domestication were scored in an F₂ population from a cross between a variety of the Asian cultivated rice (Oryza sativa) and an accession of the common wild rice (O. rufipogon). Loci controlling the inheritance of these traits were determined by making use of a molecular linkage map consisting of 348 molecular-marker loci (313 RFLPs, 12 SSRs and 23 AFLPs) based on this F₂ population. All seven qualitative traits were each controlled by a single Mendelian locus. Analysis of the 12 quantitative traits resolved a total of 44 putative QTLs with an average of 3.7 QTLs per trait. The amount of variation explained by individual QTLs ranged from a low of 6.9% to a high of 59.8%, and many of the QTLs accounted for more than 20% of the variation. Thus, genes of both major and minor effect were involved in the differences between wild and cultivated rice. The results also showed that most of the genetic factors (qualitative or QTLs) controlling the domestication-related traits were concentrated in a few chromosomal blocks. Such a clustered distribution of the genes may provide explanations for the genetic basis of the “domestication syndrome” observed in evolutionary studies and also for the “linkage drag” that occurs in many breeding programs. The information on the genetic basis of some desirable traits possessed by the wild parent may also be useful for facilitating the utilization of these traits in rice-breeding programs. Received: 1 June 1998 / Accepted: 28 July 1998     

RFLP mapping of quantitative trait loci controlling abscisic acid concentration in leaves of drought-stressed maize (Zea mays L.)

 Abscisic acid (ABA) concentration in leaves of drought-stressed plants is a quantitatively inherited trait. In order to identify quantitative trait loci (QTLs) controlling leaf ABA concentration (L-ABA) in maize, leaf samples were collected from 80 F_3:4 families of the cross Os420 (high L-ABA)×IABO78 (low L-ABA) tested under drought conditions in field trials conducted over 2 years. In each year, leaf samples were collected at stem elongation and near anthesis. The genetic map obtained with 106 restriction fragment length polymorphism (RFLP) loci covered 1370 cM, which represented approximately 85% of the UMC maize map. Sixteen different QTLs with a LOD>2.0 were revealed in at least one sampling. Across samplings, only four QTLs significantly influenced L-ABA, accounting for 66% of the phenotypic variation and 76% of the genetic variation among families. At these QTLs, the alleles which increased L-ABA were contributed by Os420. The two most important QTLs were mapped on chromosome 2 near csu133 and csu109a. The effects associated with the QTL near csu133 were more pronounced near anthesis. The support intervals of the four primary QTLs for L-ABA did not overlap the presumed map position of mutants impaired in ABA biosynthesis. Received: 27 January 1998 / Accepted: 22 April 1998     

Quantitative trait loci and underlying candidate genes controlling agronomical and fruit quality traits in octoploid strawberry <Emphasis Type="Italic">(Fragaria</Emphasis> × <Emphasis Type="Italic">ananassa</Emphasis>)

Breeding for fruit quality traits in strawberry (Fragaria × ananassa, 2n = 8x = 56) is complex due to the polygenic nature of these traits and the octoploid constitution of this species. In order to improve the efficiency of genotype selection, the identification of quantitative trait loci (QTL) and associated molecular markers will constitute a valuable tool for breeding programs. However, the implementation of these markers in breeding programs depends upon the complexity and stability of QTLs across different environments. In this work, the genetic control of 17 agronomical and fruit quality traits was investigated in strawberry using a F₁ population derived from an intraspecific cross between two contrasting selection lines, ‘232’ and ‘1392’. QTL analyses were performed over three successive years based on the separate parental linkage maps and a pseudo-testcross strategy. The integrated strawberry genetic map consists of 338 molecular markers covering 37 linkage groups, thus exceeding the 28 chromosomes. 33 QTLs were identified for 14 of the 17 studied traits and approximately 37% of them were stable over time. For each trait, 1–5 QTLs were identified with individual effects ranging between 9.2 and 30.5% of the phenotypic variation, indicating that all analysed traits are complex and quantitatively inherited. Many QTLs controlling correlated traits were co-located in homoeology group V, indicating linkage or pleiotropic effects of loci. Candidate genes for several QTLs controlling yield, anthocyanins, firmness and l-ascorbic acid are proposed based on both their co-localization and predicted function. We also report conserved QTLs among strawberry and other Rosaceae based on their syntenic location.     

QTL mapping for yield and photosynthetic related traits under different water regimes in wheat

The improvement for drought tolerance requires understanding of the genetic control of wheat (Triticum aestivum L.) reaction to drought. In this study, a set of 131 recombinant inbred lines of wheat were investigated under well-watered (WW) and drought stress (DS) environments across 2 years to map quantitative trait loci (QTLs) for yield and physiological traits. A total of 225 QTLs were detected, including 32 non-environment-specific loci that were significant in both DS and WW, one drought-specific locus and two watering-specific loci. Three consistently-expressed QTLs (QTkw-3A.2, QTss-1A, and QScn-7A.1) were identified in at least three environments and the QTkw-1D.1 was significant in DS across the 2 years. By unconditional and conditional QTL analysis, spike number per plant and kernel number per spike were more important than thousand-kernel weight for grain yield (GY) at the given genetic background. Meta-analysis identified 67 meta-QTLs that contained QTLs for at least two traits. High frequency co-location of QTLs was found among either the spike-related traits or the six physiological traits. Four photosynthesis traits (CHL, LWUE, P _N, and C _i) were co-located with GY and/or yield components on various MQTLs. The results provided QTLs that warrant further study for drought tolerance breeding and are helpful for understanding the genetic basis of drought tolerance and the genetic contribution of yield components to GY at individual QTL level in wheat.     

DNA marking of some quantitative trait loci in the cultivated edible mushroom <Emphasis Type="Italic">Pleurotus ostreatus</Emphasis> (Fr.) Kumm.

Fungi of the genus Pleurotus, in particular, species Pleurotus ostreatus (common oyster mushroom) are among most cultivated fungi in the world. Due to intense rates of development of studies in this field, efficient breeding programs are highly required in the search for new P. ostreatus strains. The principal traits used worldwide for selecting strains are intensity of fruitbearing, fruit body cap color (for some consumptive markets), and mycelium growth rate. In this connection, the objective of this work was to study these quantitative traits and to find molecular markers, which could be employed to accomplish breeding programs. In general, we found 12 genomic loci (quantitative trait loci, QTLs) controlling mycelium growth rate of oyster and six QTLs responsible for the fruit body cap color. The genetic map of P. ostreatus was constructed, and all markers of quantitative traits found by us were located on this genetic map. The obtained linkage map can be a useful tool for the accomplishment of breeding programs to improve economically important traits of oyster mushroom.     

Genetic mapping of yield traits using RIL population derived from Fuchuan Dahuasheng and ICG6375 of peanut (<Emphasis Type="Italic">Arachis hypogaea</Emphasis> L.)

The genetic architecture determinants of yield traits in peanut (Arachis hypogaea L.) are poorly understood. In the present study, an effort was made to map quantitative trait loci (QTLs) for yield traits using recombinant inbred lines (RIL). A genetic linkage map was constructed containing 609 loci, covering a total of 1557.48 cM with an average distance of 2.56 cM between adjacent markers. The present map exhibited good collinearity with the physical map of diploid species of Arachis. Ninety-two repeatable QTLs were identified for 11 traits including height of main stem, total branching number, and nine pod- and seed-related traits. Of the 92 QTLs, 15 QTLs were expressed across three environments and 65 QTLs were newly identified. Twelve QTLs for the height of main stem and the pod- and seed-related traits explaining more than 10 % of phenotypic variation showed a great potential for marker-assisted selection in improving these traits. 相似文献   

AFLP mapping of quantitative trait loci for yield-determining physiological characters in spring barley

 An amplified fragment length polymorphism (AFLP) map covering 965 cM was constructed using 94 recombinant inbred lines of a cross between the spring barley varieties Prisma and Apex. This map was employed to identify quantitative trait loci (QTLs) controlling plant height, yield and yield-determining physiological characters using an approximate multiple-QTL model, the MQM method. The seven physiological traits were parameters used in a process-based crop-growth model that predicts barley biomass production as affected by daily temperature and radiation. The traits were measured in experiments conducted over 2 years. Except for the relative growth rate of leaf area, all traits examined had at least one QTL in each year. QTLs and their effects were found to vary with developmental stages for one trait, the fraction of shoot biomass partitioned to leaves, that was measured at several stages. Most of the traits were associated, though to different extents, with the denso dwarfing gene (the height-reducing allele in Prisma) located on the long arm of chromosome 3. Some of the QTLs were mapped to similar positions in both years. The results in relation to effects of the dwarfing gene, the physiological basis for QTL×environment interaction, and the relative importance of the parameter traits with respect to yield, are discussed. Received: 17 September 1998 / Accepted: 28 December 1998     

Mapping of quantitative trait loci controlling adaptive traits in coastal Douglas-fir. II. Spring and fall cold-hardiness

Quantitative trait loci (QTLs) affecting fall and spring cold-hardiness were identified in a three-generation outbred pedigree of coastal Douglas-fir [Pseudotsuga meniziesii (Mirb.) Franco var. menziesii]. Eleven QTLs controlling fall cold-hardiness were detected on four linkage groups, and 15 QTLs controlling spring cold-hardiness were detected on four linkage groups. Only one linkage group contained QTLs for both spring and fall cold-hardiness, and these QTLs tended to map in close proximity to one another. Several QTLs were associated with hardiness in all three shoot tissues assayed in the spring, supporting previous reports that there is synchronization of plant tissues during de-acclimatization. For fall cold-hardiness, co-location of QTLs was not observed for the different tissues assayed, which is consistent with previous reports of less synchronization of hardening in the fall. In several cases, QTLs for spring or fall cold-hardiness mapped to the same location as QTLs controlling spring bud flush. QTL estimations, relative magnitudes of heritabilities, and genetic correlations based on clonal data in this single full-sib family, supports conclusions about the genetic control and relationships among cold-hardiness traits observed in population samples of Douglas-fir in previous studies. Received: 20 July 2000 / Accepted: 19 October 2000     

Genotype and phenotype associations with drought tolerance in barley tested in North Africa

A review is presented of genetic strategies deployed in a 3-yr project on drought tolerance in barley. Data were collected on genetic, physiological and agronomic traits in non-irrigated and irrigated field trials in Egypt, Morocco and Tunisia. A wide range of barley germplasm (developed from African and European cultivars, adapted landraces and wild barleys) was tested, and positive traits were found in each gene pool. The contrasting environments of the three North African countries had major effects on plant/genotype performance. Genetic effects were also detected, as were genotype × environment interactions. A range of strategies were deployed to investigate the physiology and genetics of quantitative traits associated with field performance. Quantitative trait locus (QTL) analysis was performed using backcross lines, recombinant inbred lines and doubled haploid mapping populations. A detailed genetic map was generated in the Tadmor × (ER/Apm) recombinant inbred lines, an important mapping population specifically developed by ICARDA (Centre for Agricultural Research in Dry Areas) and CIMMYT (International Maize and Wheat Improvement Center) to study drought. Quantitative trait loci (QTLs) for grain yield and other important morphological and physiological traits were also identified in a population of doubled haploids derived from F2BCj plants from a cross between a cultivar and a wild barley accession. Significantly, the wild parental line was found to contribute a number of positive alleles for yield. Effects of major developmental genes could explain many of the responses observed. QTLs were found to cluster around major genes controlling flowering time (sghI), plant stature (sdwI and arie.GP) and ear type (vrsl), and it is highly likely that the associations represent pleiotropic effects. Some QTLs were associated with candidate genes such as dehydrins and rubisco activase. One of the most significant results was the identification and generation of material that out performed the best local standards in the three participating North African countries; the selected lines have now entered local breeding programmes. The strategies adopted provided information on physiological traits, genotypes and genetic markers that could be used for marker-assisted selection. Target QTLs and their associated genetic markers may be deployed in marker assisted selection programmes to match crop phenology to the field environment.     

QTLs for Na<Superscript>+</Superscript> and K<Superscript>+</Superscript> uptake of the shoots and roots controlling rice salt tolerance

An F₂ and an equivalent F₃ population derived from a cross between a high salt-tolerance indica variety, Nona Bokra, and a susceptible elite japonica variety, Koshihikari, were produced. We performed QTL mapping for physiological traits related to rice salt-tolerance. Three QTLs for survival days of seedlings (SDSs) under salt stress were detected on chromosomes 1, 6 and 7, respectively, and explained 13.9% to 18.0% of the total phenotypic variance. Based on the correlations between SDSs and other physiological traits, it was considered that damage of leaves was attributed to accumulation of Na⁺ in the shoot by transport of Na⁺ from the root to the shoot in external high concentration. We found eight QTLs including three for three traits of the shoots, and five for four traits of the roots at five chromosomal regions, controlled complex physiological traits related to rice salt-tolerance under salt stress. Of these QTLs, the two major QTLs with the very large effect, qSNC-7 for shoot Na⁺ concentration and qSKC-1 for shoot K⁺ concentration, explained 48.5% and 40.1% of the total phenotypic variance, respectively. The QTLs detected between the shoots and the roots almost did not share the same map locations, suggesting that the genes controlling the transport of Na⁺ and K⁺ between the shoots and the roots may be different.     

Genetic mapping of QTLs affecting tree growth and architecture in Populus: implication for ideotype breeding

 A segregated F₂ progeny derived from two highly divergent poplar species, Populus trichocarpa and P. deltoides, was used to evaluate the genetic basis of canopy structure and function in a clonally replicated plantation. The QTLs of large effect on growth, branch, and leaf traits were identified using the Populus linkage map constructed by 343 molecular markers. Stem height and harvest index appeared to be under the control of few QTLs with major effects, whereas variation in stem basal area, volume, and dry weight might be due to many more QTLs. Branch and leaf traits on sylleptics tended to include more QTLs with major effects than those on proleptics. In the environment where the pedigree was tested, sylleptics were very frequent in the P. trichocarpa parent but rare in the P. deltoides parent. For sylleptic traits for which two or more QTLs were identified, however, increases in the trait values were conditioned not only by the P. trichocarpa alleles, but also by the P. deltoides alleles. Similar findings were found for traits on proleptics that were differently expressed between the two parents. For both sylleptic and proleptic branch types, dominance (ranging from partial to over) was observed. The QTLs on specific linkage groups were found to be responsible for relationships between stem growth and its developmental components. Similar QTL clustering was also observed for morphological or developmental integration in poplar, i.e., traits with similar developmental origins are more strongly correlated with one another than traits with different developmental origins. The implications of these molecular genetic results for ideotype breeding of poplars are discussed. Received: 15 July 1997/Accepted: 19 August 1997     

Bulk segregant analysis with molecular markers and its use for improving drought resistance in maize

The usual method to locate and compare loci regulating quantitative traits (QTLs) requires a segregating population of plants with each one genotyped with molecular markers. However, plants from such segregating populations can also be grouped according to phenotypic expression of a trait and tested for differences in allele frequency between the population bulks: bulk segregant analysis (BSA). The same probes used for making a genetic map (e.g. isozyme, RFLP, RAPD, etc) can be used for BSA. A molecular marker showing polymorphism between the parents of the population and which is closely-linked to a major QTL regulating a particular trait will mainly co-segregate with that QTL, i.e. segregate according to the phenotype if the QTL has a large effect. Thus, if plants are grouped according to expression of the trait and extreme groups tested with that polymorphic marker, the frequency of the two marker alleles present within each of the two bulks should deviate significantly from the ratio of 1 : 1 expected for most populations. As chromosomal locations of many molecular markers have now been determined in many species, the map location of closely-linked QTLs can therefore be deduced without having to genotype every individual in segregating populations. This has been used successfully with composite populations of maize to locate QTLs associated with yield under severe drought. An inbred line derived from one of the populations selected for higher drought yield has been crossed with a drought-susceptible inbred line to produce a mapping population for QTL analysis of physiological and developmental traits likely to regulate yield under drought. Future work to identify traits having QTLs with flanking markers showing significant allele frequency differences in the GSA studies will indicate those traits likely to be important in determining yield under drought.Key words: Bulk segregant analysis (BSA), drought resistance, genetic maps, maize, molecular markers, Zea mays (L.).      

Identification of candidate genes for key fibre‐related QTLs and derivation of favourable alleles in Gossypium hirsutum recombinant inbred lines with G. barbadense introgressions

Fine mapping QTLs and identifying candidate genes for cotton fibre‐quality and yield traits would be beneficial to cotton breeding. Here, we constructed a high‐density genetic map by specific‐locus amplified fragment sequencing (SLAF‐seq) to identify QTLs associated with fibre‐quality and yield traits using 239 recombinant inbred lines (RILs), which was developed from LMY22 (a high‐yield Gossypium hirsutumL. cultivar) × LY343 (a superior fibre‐quality germplasm with G. barbadenseL. introgressions). The genetic map spanned 3426.57 cM, including 3556 SLAF‐based SNPs and 199 SSR marker loci. A total of 104 QTLs, including 67 QTLs for fibre quality and 37 QTLs for yield traits, were identified with phenotypic data collected from 7 environments. Among these, 66 QTLs were co‐located in 19 QTL clusters on 12 chromosomes, and 24 QTLs were detected in three or more environments and determined to be stable. We also investigated the genomic components of LY343 and their contributions to fibre‐related traits by deep sequencing the whole genome of LY343, and we found that genomic components from G. hirsutum races (which entered LY343 via its G. barbadense parent) contributed more favourable alleles than those from G. barbadense. We further identified six putative candidate genes for stable QTLs, including Gh_A03G1147 (GhPEL6), Gh_D07G1598 (GhCSLC6) and Gh_D13G1921 (GhTBL5) for fibre‐length QTLs and Gh_D03G0919 (GhCOBL4), Gh_D09G1659 (GhMYB4) and Gh_D09G1690 (GhMYB85) for lint‐percentage QTLs. Our results provide comprehensive insight into the genetic basis of the formation of fibre‐related traits and would be helpful for cloning fibre‐development‐related genes as well as for marker‐assisted genetic improvement in cotton.     

The main effects, epistatic effects and environmental interactions of QTLs on the cooking and eating quality of rice in a doubled-haploid line population

Amylose content (AC), gel consistency (GC) and gelatinazation temperature (GT) are three important traits that influence the cooking and eating quality of rice. The objective of this study was to characterize the genetic components, including main-effect quantitative trait loci (QTLs), epistatic QTLs and QTL-by-environment interactions (QEs), that are involved in the control of these three traits. A population of doubled haploid (DH) lines derived from a cross between two indica varieties Zhenshan 97 and H94 was used, and data were collected from a field experiment conducted in two different environments. A genetic linkage map consisting of 218 simple sequence repeat (SSR) loci was constructed, and QTL analysis performed using qtlmapper 1.6 resolved the genetic components into main-effect QTLs, epistatic QTLs and QEs. The analysis detected a total of 12 main-effect QTLs for the three traits, with a QTL corresponding to the Wx locus showing a major effect on AC and GC, and a QTL corresponding to the Alk locus having a major effect on GT. Ten digenic interactions involving 19 loci were detected for the three traits, and six main-effect QTLs and two pairs of epistatic QTLs were involved in QEs. While the main-effect QTLs, especially the ones corresponding to known major loci, apparently played predominant roles in the genetic basis of the traits, under certain conditions epistatic effects and QEs also played important roles in controlling the traits. The implications of the findings for rice quality improvement are discussed.     

QTL Analysis for Flag Leaf Characteristics and Their Relationships with Yield and Yield Traits in Rice

Photosynthesis of carbohydrate is the primary source of grain yield in rice (Oryza sativa L.). It is important to genetically analyze the morphological and the physiological characteristics of functional leaves, especially flag leaf, in rice improvement. In this study, a recombinant inbred population derived from a cross between an indica (O. sativa L. ssp. indica) cultivar and a japonica (O. sativa L. ssp. japonica) cultivar was employed to map quantitative traits loci (QTLs) for the morphological (i.e., leaf length, width, and area) and physiological (i.e., leaf color rating and stay-green) characteristics of flag leaf and their relationships with yield and yield traits in 2003 and 2004. A total of 17 QTLs for morphological traits (flag leaf length, width, and area), 6 QTLs for degree of greenness and 14 QTLs for stay-green-related traits (retention-degrees of greenness, relative retention of greenness, and retention of the green area) were resolved, and 10 QTLs were commonly detected in both the years. Correlation analysis revealed that flag leaf area increased grain yield by increasing spikelet number per panicle. However, the physiological traits including degree of greenness and stay-green traits were not or negatively correlated to grain yield and yield traits, which may arise from the negative relation between degree of greenness and flag leaf size and the partial sterility occurred in a fraction of the lines in this population. The region RM255-RM349 on chromosome 4 controlled the three leaf morphological traits simultaneously and explained a large part of variation, which was very useful for genetic improvement of grain yield. The region RM422-RM565 on chromosome 3 was associated with the three stay-green traits simultaneously, and the use of this region in genetic improvement of grain yield needs to be assessed by constructing near-isogenic lines.     

Identification of quantitative trait loci for yield and yield components in an advanced backcross population derived from the<Emphasis Type="Italic"> Oryza sativa</Emphasis> variety IR64 and the wild relative<Emphasis Type="Italic"> O. rufipogon</Emphasis>

A BC₂F₂ population developed from an interspecific cross between Oryza sativa (cv IR64) and O. rufipogon (IRGC 105491) was used in an advanced backcross QTL analysis to identify and introduce agronomically useful genes from this wild relative into the cultivated gene pool. The objectives of this study were: (1) to identify putative yield and yield component QTLs that can be useful to improve the elite cultivar IR64; (2) to compare the QTLs within this study with previously reported QTLs in rice as the basis for identifying QTLs that are stable across different environments and genetic backgrounds; and (3) to compare the identified QTLs with previously reported QTLs from maize to examine the degree of QTL conservation across the grass family. Two hundred eighty-five families were evaluated in two field environments in Indonesia, with two replications each, for 12 agronomic traits. A total of 165 markers consisting of 131 SSRs and 34 RFLPs were used to construct the genetic linkage map. By employing interval mapping and composite interval mapping, 42 QTLs were identified. Despite its inferior performance, 33% of the QTL alleles originating from O. rufipogon had a beneficial effect for yield and yield components in the IR64 background. Twenty-two QTLs (53.4%) were located in similar regions as previously reported rice QTLs, suggesting the existence of stable QTLs across genetic backgrounds and environments. Twenty QTLs (47.6%) were exclusively detected in this study, uncovering potentially novel alleles from the wild, some of which might improve the performance of the tropical indica variety IR64. Additionally, several QTLs for plant height, grain weight, and flowering time detected in this study corresponded to homeologous regions in maize containing previously detected maize QTLs for these traits.     

New QTLs identified for plant water status, water-soluble carbohydrate and osmotic adjustment in a barley population grown in a growth-chamber under two water regimes

Quantitative trait locus (QTL) analysis was carried out with 167 recombinant inbred lines (RILs) of barley derived from a cross between Tadmor and Er/Apm to identify the genomic regions controlling traits related to plant water status and osmotic adjustment (OA). The experiment was conducted in a growth chamber using a random incomplete block design (nine blocks). Relative water content (RWC) and leaf osmotic potential (ψ_π) were measured at 100% and 14% of the field capacity on 105 RILs in each block. In addition, the water-soluble carbohydrate concentration (WSC) was measured in the four first-blocks. The leaf osmotic potential at full turgor (ψ_π100), the water-soluble carbohydrate concentration at full turgor (WSC100), and also OA, the accumulation of water-soluble carbohydrates (dWSC100), the contribution of a change in water content to OA (CWC) and of the net solute accumulation to OA (SA) have also been calculated. In a previous paper (Teulat et al. 1998), 12 QTLs were identified for RWC, ψ_π, ψ_π100 and OA with adjusted means (block effects and pot-within-block effects fixed) with an incomplete genetic map. In the present paper, a more-saturated and improved map is described. A new QTL analysis as been performed with adjusted means. The new QTLs identified for previous evaluated traits, as well as the QTLs for the new traits, are presented. Eight additional regions (22 QTLs) were identified which increased to 13 the total number of chromosomal regions (32 QTLs) controlling traits related to plant water status and/or osmotic adjustment in this barley genetic background. The results emphasise the value of the experimental design employed for the evaluation of traits difficult to assess in genetic studies. The putative target regions for drought-tolerance improvement are discussed combining arguments on the consistency of QTLs and, when possible, the physiological value of QTLs (trait relevance, syntenic relationships and clustering of QTLs). Received: 8 March 2000 / Accepted: 18 October 2000     

Genetic analysis of Na+ and K+ concentrations in leaf and stem as physiological components of salt tolerance in Tomato

The sodium and potassium concentrations in leaf and stem have been genetically studied as physiological components of the vegetative and reproductive development in two populations of F₈ lines, derived from a salt sensitive genotype of Solanum lycopersicum cv. Cerasiforme, as female parent, and two salt tolerant lines, as male parents, from S. pimpinellifolium, the P population (142 lines), and S. cheesmaniae, the C population (116 lines). Genetic parameters of ten traits under salinity and five of them under control conditions were studied by ANOVA, correlation, principal component and QTL analysis to understand the global response of the plant. Two linkage maps including some tomato flowering time and salt tolerance candidate genes encoding for SlSOS1, SlSOS2, SlSOS3, LeNHX1, LeNHX3, were used for the QTL detection. Thirteen and 20 QTLs were detected under salinity in the P and C populations, respectively, and four under control conditions. Highly significant and contributing QTLs (over 40%) for the concentrations of Na⁺ and K⁺ in stems and leaves have been detected on chromosome 7 in both the populations. This is the only genomic position where the concentration QTLs for both the cations locate together. The proportion of QTLs significantly affected by salinity was larger in the P population (64.3%, including all QTLs detected under control) than in the C population (21.4%), where the estimated genetic component of variance was larger for most traits. A highly significant association between the leaf area and fruit yield under salinity was found only in the C population, which is supported by the location of QTLs for these traits in a common region of chromososome C1. As far as breeding for salt tolerance is concerned, only two sodium QTLs (lnc1.1 and lnc8.1) map in genomic regions of C1 and C8 where fruit yield QTLs are also located but in both the cases the profitable allele corresponds to the salt sensitive, cultivated species. One of those QTLs, lnc1.1 might involve LeNHX3.     

Genetic analysis of drought tolerance in maize by molecular markers. II. Plant height and flowering

Drought is a serious agronomic problem, and one of the most important factors contributing to crop yield loss. In maize grown in temperate areas, drought stress occurs just before and during the flowering period; consequently, tolerance to water stress in this species is largely determined by events that occur at or shortly after flowering. The purposes of our investigation were: (1)?to identify the chromosomal regions where factors conferring drought tolerance for traits related to plant development and flowering are located and (2)?to compare these regions with those carrying QTLs controlling these traits, in order to get indirect information on the genetic and physiological basis of maize response to water stress. To this aim, we performed a linkage analysis between the expression of male and female flowering time, anthesis-silking interval (ASI), plant height and molecular markers. The experiment was carried out under two environmental conditions, well-watered and water-stressed, on a maize population of 142 recombinant inbred lines obtained by selfing the F₁ between lines B73 and H99 and genotyped by RFLP, microsatellites (SSR) and AFLP markers, for a total of 153 loci. Linkage analysis revealed that, for male flowering time and plant height, most of the QTLs detected were the same under control and stress conditions. In contrast, with respect to female flowering time and ASI diverse QTLs appeared to be expressed either under control conditions or under stress. All of the QTLs conferring tolerance to drought were located in a different chromosome position as compared to the map position of the factors controlling the trait per se. This suggests that plant tolerance, in its different components, is not attributable to the presence of favourable allelic combinations controlling the trait but is based on physiological characteristics not directly associated with the control of the character.     

A linkage map of maize × teosinte <Emphasis Type="Italic">Zea luxurians</Emphasis> and identification of QTLs controlling root aerenchyma formation

The objectives of this study were to construct a linkage map and identify quantitative trait loci (QTLs) controlling root aerenchyma formation in drained soil conditions using 195 F₂ individuals derived from a cross between maize inbred line B73 × teosinte Zea luxurians. A 107 SSR marker based map covering 1,331 cM across all ten chromosomes was developed. One significant difference between the parents utilized in the study was that under non-flooding conditions, B73 exhibits a minor capacity to develop root aerenchyma, whereas Z. luxurians exhibits a high tendency to form aerenchyma. Linkage analysis indicated segregation distortion regions on chromosomes 2, 4 and 8, and severe recombination suppression on the long arm of chromosome 4. Multiple interval mapping analysis suggests that five QTLs for aerenchyma formation in non-flooding conditions are located on chromosomes 2, 3, 5, 9 and 10, and these explained 36.3% of the total phenotyphic variance. The Z. luxurians alleles in all five QTLs increased the capacity to form aerenchyma and the locations of these QTLs did not overlap those previously identified in the teosinte Z. nicaraguensis. By transferring aerenchyma-forming QTLs from both Z. luxurians and Z. nicaraguensis, it may be possible to pyramid these genes and develop a maize line with exceptional aerenchyma formation and a high level of tolerance to flooding conditions.