Potassium selective chemically modified field effect transistors based on AlGaN/GaN two-dimensional electron gas heterostructures

We investigate the use of the AlGaN/GaN high electron mobility transistor (HEMT) as a novel transducer for the development of ion-selective chemically modified HEMT sensors (ChemHEMTs). For this, polyvinyl chloride (PVC) membrane doped with ion-selective ionophores is deposited onto the area of the gate for the chemical recognition step, while the AlGaN/GaN HEMT is used as the transducer. In particular, the use of a valinocycin doped membrane with thickness of 50 μm generates a sensor with excellent analytical characteristics for the monitoring of K⁺. The K⁺-ChemHEMT has sensitivity of 52.4 mV/pK⁺in the linear range of 10⁻⁵ to 10⁻² M, while the detection limit is in the order of 3.1 × 10⁻⁶ M. Also, the sensor shows selectivity similar to valinomycin-based ISEs, while the signal stability over time and the measurement to measurement reproducibility are very good.     

Bioelectrochemical signal monitoring of in-vitro cultured cells by means of an automated microsystem based on solid state sensor-array

In the last decade, fundamental advances in whole cell based sensors and microsystems have established the extracellular acidification rate monitoring of cell cultures as an important indicator of the global cellular metabolism. Innovative approaches adopting advanced integrated sensor array-based microsystems represent an emerging technique with numerous biomedical applications. This paper reports a cell-based microsystem, for multisite monitoring of the physiological state of cell populations. The functional components of the microsystem are an ion sensitive field effect transistor (ISFET) array-based sensor chip and a CMOS integrated circuit for signal conditioning and sensor signal multiplexing. In order to validate the microsystem capabilities for in-vitro toxicity screening applications, preliminary experimental measurements with Cheratinocytes, and CHO cells are presented. Variations in the acidification rate, imputable to the inhibitory effect of the drug on the metabolic cell activity have been monitored and cell viability during long term measurements has been also demonstrated.     

The Current Collapse in AlGaN/GaN High-Electron Mobility Transistors Can Originate from the Energy Relaxation of Channel Electrons?

Influence of the energy relaxation of the channel electrons on the performance of AlGaN/GaN high-electron mobility transistors (HEMTs) has been investigated using self-consistent solution to the coupled Schrödinger equation and Poisson equation. The first quantized energy level in the inversion layer rises and the average channel electron density decreases when the channel electric field increases from 20 kV/cm to 120 kV/cm. This research also demonstrates that the energy relaxation of the channel electrons can lead to current collapse and suggests that the energy relaxation should be considered in modeling the performance of AlGaN/GaN HEMTs such as, the gate leakage current, threshold voltage, source-drain current, capacitance-voltage curve, etc.     

Detection of clinically relevant levels of protein analyte under physiologic buffer using planar field effect transistors

Electrochemical detection of protein binding at physiological salt concentration by planar field effect transistor platforms has yet to be documented convincingly. Here we report detection of streptavidin and clinically relevant levels of biotinylated monokine induced by interferon gamma (MIG) at physiological salt concentrations with AlGaN heterojunction field effect transistors (HFETs). The AlGaN HFETs are functionalized with a silane linker and analyte-specific affinity elements. Polarity of sensor responses is as expected from n-type HFETs to negatively and positively charged analytes. Sensitivity of the HFET sensors increases when salt concentration decreases, and the devices also exhibit dose-dependent responses to analyte. Detection of clinically relevant MIG concentrations at physiological salt levels demonstrates the potential for AlGaN devices to be used in development of in vivo biosensors.     

Interfacing a silicon chip to pairs of snail neurons connected by electrical synapses

 Future hybrid neuron-semiconductor chips will consist of complex neural networks that are directly interfaced to electronic integrated circuits. They will help us to understand the dynamics of neuronal networks and may lead to novel computational facilities. Here we report on an elementary step towards such neurochips. We designed and fabricated a silicon chip for multiple two-way interfacing, and cultured on it pairs of neurons from the pedal ganglia of the snail Lymnaea stagnalis. These neurons were joined to each other by an electrical synapse, and to the chip by a capacitive stimulator and a recording transistor. We obtained a set of neuroelectronic units with sequential and parallel signal transmission through the neuron–silicon interface and the synapse, with a bidirectionally interfaced neuron-pair and with a signal path from the chip through a synaptically connected neuron pair back to the chip. The prospects for assembling more involved hybrid networks on the basis of these neuroelectronic units are considered. Received: 13 April 2000 / Accepted in revised form: 29 September 2000     

Long-Range Surface Plasmon Polaritons for Efficient Optical Coupling in AlGaN/GaN Quantum Well Infrared Photodetector

In this paper, the supermodes, long-range surface plasmon polaritons (LRSPPs), have been theoretically studied to enhance the optical coupling of AlGaN/GaN quantum well infrared photodetector (QWIP) based on gold–Si₃N₄ hybrid architecture. The electromagnetic field, energy flow, and current density are analyzed by finite element method (FEM). In time domain, the electric field component E _z and current density J _z perpendicular to the multi-quantum wells (MQWs) are symmetric and asymmetric distributions over the gold grating, respectively, which precisely prove the existence of LRSPPs. The averaged |E _z |² across the whole quantum well region reaches 1.51?(V/m)² when the electric field intensity (|E ₀|²) of normal incidence is 1?(V/m)² at 4.65 μm. Extraordinarily low loss of the LRSPPs results in a coupling efficiency enhancement ratio of 2.23 in AlGaN/GaN QWIP compared with that obtained via bare gold grating with different polarized sources, exhibiting great potential for application in the focal plane arrays.     

N-Channel field-effect transistors with floating gates for extracellular recordings

A field-effect transistor (FET) for recording extracellular signals from electrogenic cells is presented. The so-called floating gate architecture combines a complementary metal oxide semiconductor (CMOS)-type n-channel transistor with an independent sensing area. This concept allows the transistor and sensing area to be optimised separately. The devices are robust and can be reused several times. The noise level of the devices was smaller than of comparable non-metallised gate FETs. In addition to the usual drift of FET devices, we observed a long-term drift that has to be controlled for future long-term measurements. The device performance for extracellular signal recording was tested using embryonic rat cardiac myocytes cultured on fibronectin-coated chips. The extracellular cell signals were recorded before and after the addition of the cardioactive isoproterenol. The signal shapes of the measured action potentials were comparable to the non-metallised gate FETs previously used in similar experiments. The fabrication of the devices involved the process steps of standard CMOS that were necessary to create n-channel transistors. The implementation of a complete CMOS process would facilitate the integration of the logical circuits necessary for signal pre-processing on a chip, which is a prerequisite for a greater number of sensor spots in future layouts.     

Recombinant maxi-K channels on transistor, a prototype of iono-electronic interfacing

We report on the direct electrical interfacing of a recombinant ion channel to a field-effect transistor on a silicon chip. The ion current through activated maxi-K(Ca) channels in human embryonic kidney (HEK293) cells gives rise to an extracellular voltage between cell and chip that controls the electronic source-drain current. A comparison with patch-clamp recording shows that the channels at the cell/chip interface are fully functional and that they are significantly accumulated there. The direct coupling of potassium channels to a semiconductor on the level of an individual cell is the prototype for an iono-electronic interface of ligand-gated or G protein-coupled ion channels and the development of screening biosensors with many transfected cells on a chip with a large array of transistors.     

Nanovesicle-based bioelectronic nose platform mimicking human olfactory signal transduction

We developed a nanovesicle-based bioelectronic nose (NBN) that could recognize a specific odorant and mimic the receptor-mediated signal transmission of human olfactory systems. To build an NBN, we combined a single-walled carbon nanotube-based field effect transistor with cell-derived nanovesicles containing human olfactory receptors and calcium ion signal pathways. Importantly, the NBN took advantages of cell signal pathways for sensing signal amplification, enabling ≈ 100 times better sensitivity than that of previous bioelectronic noses based on only olfactory receptor protein and carbon nanotube transistors. The NBN sensors exhibited a human-like selectivity with single-carbon-atomic resolution and a high sensitivity of 1 fM detection limit. Moreover, this sensor platform could mimic a receptor-meditated cellular signal transmission in live cells. This sensor platform can be utilized for the study of molecular recognition and biological processes occurring at cell membranes and also for various practical applications such as food screening and medical diagnostics.     

Diverse effects of the MalE-LacZ hybrid protein on Escherichia coli cell physiology.

The hybrid protein between the periplasmic maltose-binding protein and the cytoplasmic beta-galactosidase (the MalE-LacZ hybrid protein) was previously shown to block the export of envelope proteins when synthesized in large amounts. Now we show that the hybrid protein exerts another major effect on the cell, that is, induction of the heat shock proteins. This latter effect was dependent on the htpR gene product but independent of the function of the signal sequence on the hybrid protein. On the other hand, the previously reported induction of the SecA protein by the hybrid protein was independent of htpR and may be caused by the reduced protein export ability of the cell. The functional htpR gene is essential for viability of the cell in which the basal level of the hybrid protein is synthesized, whereas in the absence of the hybrid protein htpR is dispensable at low temperature. These results indicate that the hybrid protein somehow generates a signal or stress that is similar to what the cell experiences at elevated temperatures.     

Non-invasive measurement of cell membrane associated proton gradients by ion-sensitive field effect transistor arrays for microphysiological and bioelectronical applications

The pH in the cellular microenvironment (pH(M)) is an important regulator of cell-to-cell and cell-to-host interactions. Additionally the extracellular acidification rate of a cell culture is an important indicator of global cellular metabolism. In a new approach a biocompatible ion-sensitive field effect transistor (ISFET)-array was developed to measure the pH(M) close to a surface and the global extracellular acidification rate at the same time. This ISFET-array is part of a new multiparametric microsensor chip. The paper highlights some basic applications of this method for in-vitro measurements. Using a fluid perfusion system for cell culture media, it is possible to measure the pH(M) of few (five to ten) adherent tumor cells in a distance of 10-100 nm from the cell plasma membrane. Experiments showed a pH(M)-value of 6.68 +/- 0.06 pH. Further experiments suggest that both the low pH, and the extracellular acidification rate of the examined tumor cell line are mainly built up by glycolysis.     

The region ion sensitive field effect transistor, a novel bioelectronic nanosensor

A novel type of bioelectronic region ion sensitive field effect transistor (RISFET) nanosensor was constructed and demonstrated on two different sensor chips that could measure glucose with good linearity in the range of 0–0.6 mM and 0–0.3 mM with a limit of detection of 0.1 and 0.04 mM, respectively. The sensor is based on the principle of focusing charged reaction products with an electrical field in a region between the sensing electrodes. For glucose measurements, negatively charged gluconate ions were gathered between the sensing electrodes. The signal current response was measured using a low-noise pico ammeter (pA). Two different sizes of the RISFET sensor chips were constructed using conventional electron beam lithography. The measurements are done in partial volumes mainly restricted by the working distance between the sensing electrodes (790 and 2500 nm, respectively) and the influence of electrical fields that are concentrating the ions. The sensitivity was 28 pA/mM (2500 nm) and 830 pA/mM (790 nm), respectively. That is an increase in field strength by five times between the sensing electrodes increased the sensitivity by 30 times. The volumes expressed in this way are in low or sub femtoliter range. Preliminary studies revealed that with suitable modification and control of parameters such as the electric control signals and the chip electrode dimensions this sensor could also be used as a nanobiosensor by applying single enzyme molecule trapping. Hypotheses are given for impedance factors of the RISFET conducting channel.     

Real time image processing with an analog vision chip system

A linear analog network model is proposed to characterize the function of the outer retinal circuit in terms of the standard regularization theory. Inspired by the function and the architecture of the model, a vision chip has been designed using analog CMOS Very Large Scale Integrated circuit technology. In the chip, sample/hold amplifier circuits are incorporated to compensate for statistic transistor mismatches. Accordingly, extremely low noise outputs were obtained from the chip. Using the chip and a zero-crossing detector, edges of given images were effectively extracted in indoor illumination.     

An ISFET-based immunosensor for the detection of beta-Bungarotoxin

An ion-sensitive field effect transistor (ISFET)-based immunosensor was developed to detect/quantitate beta-Bungarotoxin (beta-BuTx), a potent presynaptic neurotoxin from the venom of Bungarus multicinctus. A murine monoclonal antibody (mAb 15) specific to beta-BuTx was immobilized onto silicon nitride wafers after silanization and activation with glutaraldehyde. A chip based enzyme linked-immunosorbantassay (ELISA) was performed to ascertain antigen binding to the immobilized antibody. To develop an electrochemical immunosensing system for the detection/quantitation of beta-BuTx, an ISFET was used as a solid phase detector. MAb 15 was immobilized on the gate region of the ISFET. The antigen antibody reaction was monitored by the addition of urease conjugated rabbit anti-beta-BuTx antibodies. The sensor can detect toxin level as low as 15.6 ng/ml. The efficacy of the sensor for the determination of beta-BuTx from B. multicinctus venom was demonstrated in mouse model. Toxin concentration was highest at the site of injection (748.0+/-26 ng/ml) and moderate amount was found in the plasma (158.5+/-13 ng/ml).     

An enhanced glucose biosensor using charge transfer techniques

An enhanced glucose biosensor based on a charge transfer technique glucose sensor (CTTGS) is described and demonstrated experimentally. In the proposed CTTGS, which is accumulation method (d-gluconate+H(+)) ion perception system, the quality of output signal with "signal integration cycles" is high. With the proposed CTTGS it is possible to amplify the sensing signals without an external amplifier by using an accumulation cycle. It can be supposed that measurements of small (d-gluconate+H(+)) ion fluctuation are difficult by ion-sensitive field effect transistor (ISFET) because the theoretical maximum sensitivity is only 59 mV/pH and the small output signals are buried in the 1/f noise component of the metal-insulator-semi-conductor field-effect transistor (MISFET). Therefore, the CTTGS has many advantages, such as high sensitivity, high accuracy, high signal-to-noise ratio (SNR), and has been successfully demonstrated using a charge transfer technique. The CTTGS exhibited excellent performance for glucose with a large span (1445 mV) and good reproducibility. Moreover, the CTTGS has good sensitivity in this range of 7.22mV/mM, a lower detection limit of about 0.01 mM/L and an upper detection limit of about 200 mM/L compared with amperometric glucose analysis which has been studied recently. Under optimum conditions, the proposed CTTGS exceeds the performance of the widely used ISFET glucose sensor. The sensitivity of the CTTGS (7.22 mV/mM) was seven times higher than that of the ISFET (1 mV/mM). Furthermore, the sensitivity obtained for human glucose levels was 29.06 mV/mM with a non-linear error of +/-0.27%; the linearity is y=0.0294x+1.8612 and R(2)=0.9999, which is acceptable for clinical application. Real sample analysis is investigated in blood glucose level by our developed CTTGS ISFET system.     

Aerobic methylobacteria as the basis for a biosensor for dichloromethane detection

Cells of dichloromethane (DChM) bacteria-destructors were immobilized by sorption on different types of membranes, which were fixed on the measuring surface of a pH-sensitive field transistor. The presence of DChM in the medium (0.6–8.8 mM) led to a change in the transistor’s output signal, which was determined by the appearance of H⁺ ions in the medium due to DChM utilization by methylobateria. Among four strains of methylobacteria—Methylobacterium dichloromethanicum DM4, Methylobacterium extorquens DM17, Methylopila helvetica DM6, and Ancylobacter dichloromethanicus DM16—the highest and most stable activity toward DChM degradation was observed in the strain M. dichloromethanicum DM4. Among 11 types of membranes for cell immobilization, Millipore nitrocellulose membranes and chromatographic fiber paper GF/A, which allow one to obtain stable biosensor signals for 2 weeks without a bioreceptor change, were chosen as optimal carriers.     

Fabrication and characteristics of MOSFET protein chip for detection of ribosomal protein

A metal oxide silicon field effect transistor (MOSFET) protein chip for the easy detection of protein was fabricated and its characteristics were investigated. Generally, the drain current of the MOSFET is varied by the gate potential. It is expected that the formation of an antibody-antigen complex on the gate of MOSFET would lead to a detectable change in the charge distribution and thus, directly modulate the drain current of MOSFET. As such, the drain current of the MOSFET protein chip can be varied by ribosomal proteins absorbed by the self-assembled monolayer (SAM) immobilized on the gate (Au) surface, as ribosomal protein has positive charge, and these current variations then used as the response of the protein chip. The gate of MOSFET protein chip is not directly biased by an external voltage source, so called open gate or floating gate MOSFET, but rather chemically modified by immobilized molecular receptors called self-assembled monolayer (SAM). In our experiments, the current variation in the proposed protein chip was about 8% with a protein concentration of 0.7 mM. As the protein concentration increased, the drain current also gradually increased. In addition, there were some drift of the drain current in the device. It is considered that these drift might be caused by the drift from the MOSFET itself or protein absorption procedures that are relied on the facile attachment of thiol (-S) ligands to the gate (Au) surface. We verified the formation of SAM on the gold surface and the absorption of protein through the surface plasmon resonance (SPR) measurement.     

Neuron–transistor coupling: interpretation of individual extracellular recorded signals

The electrical coupling of randomly migrating neurons from rat explant brain-stem slice cultures to the gates of non-metallized field-effect transistors (FETs) has been investigated. The objective of our work is the precise interpretation of extracellular recorded signal shapes in comparison to the usual patch-clamp protocols to evaluate the possible use of the extracellular recording technique in electrophysiology. The neurons from our explant cultures exhibited strong voltage-gated potassium currents through the plasma membrane. With an improved noise level of the FET set-up, it was possible to record individual extracellular responses without any signal averaging. Cells were attached by patch-clamp pipettes in voltage-clamp mode and stimulated by voltage step pulses. The point contact model, which is the basic model used to describe electrical contact between cell and transistor, has been implemented in the electrical simulation program PSpice. Voltage and current recordings and compensation values from the patch-clamp measurement have been used as input data for the simulation circuit. Extracellular responses were identified as composed of capacitive current and active potassium current inputs into the adhesion region between the cell and transistor gate. We evaluated the extracellular signal shapes by comparing the capacitive and the slower potassium signal amplitudes. Differences in amplitudes were found, which were interpreted in previous work as enhanced conductance of the attached membrane compared to the average value of the cellular membrane. Our results suggest rather that additional effects like electrodiffusion, ion sensitivity of the sensors or more detailed electronic models for the small cleft between the cell and transistor should be included in the coupling model.     

Electrical behaviour of MEH-PPV based diode and transistor

The potential of organic semiconductor based devices for light generation is demonstrated by the commercialisation of display technologies using organic light emitting diode (OLED). In OLED, organic materials plays an important role of emitting light once the current is passed through. However OLED have drawbacks whereby it suffers from photon loss and exciton quenching. Organic light emitting transistor (OLET) emerged as a new technology to compensate the efficiency and brightness loss encountered in OLED. The structure has combinational capability to switch the electronic signal such as the field effect transistor (FET) as well as to generate light. Different colours of light could be generated by using different types of organic material. The light emission could also be tuned and scanned in OLET. The studies carried out in this paper focuses on investigation of fabricated MEH-PPV based OLED and also OLET via current voltage characteristics. These studies will continue with a view to develop an optimised MEH-PPV based OLET.     

Characterization of the signaling function of MHC class II molecules during antigen presentation by B cells.

In addition to their role as peptide binding proteins, MHC class II proteins can also function as signal transducing molecules. Recent work using B cells expressing genetically engineered truncated MHC class II molecules has suggested that signaling through the cytoplasmic domains of these proteins plays an important role in the generation of signals required for the activation of some T cell hybrids. Treatment of truncated Ia-expressing B cells with cAMP-elevating agents corrects the deficiency in Ag presentation by these cells. We report that the MHC class II-mediated signal appears to act by a mechanism that increases the efficiency of Ag presentation by B cells thereby lowering the amount of specific Ag required for T cell activation. We further show that the induction of the cAMP-induced signal in B cells is inhibited by cycloheximide and cytochalasin A, implicating protein synthesis as well as cytoskeletal rearrangements in Ag presentation to accessory signal- dependent hybrids. In contrast, these agents do not block Ag presentation to a T cell hybrid previously shown not to require the cAMP-induced signal for activation. The signal-dependent T hybrid is additionally dependent on LFA-1-ICAM-1 interaction for activation, whereas the signal-independent hybrid is not. These observations suggest the existence of two types of T cell hybrid with respect to their requirements for activation: those that require only the recognition of MHC class II-peptide complexes without accessory signals, as shown by their ability to respond to purified Ia on planar membranes, and those that, in addition to recognition of MHC II/Ag, require LFA-1-ICAM-1 interaction and the delivery of additional signal(s) induced in the B cell via signal transduction through MHC class II molecules.