Purification and Primary Structure of Proteinous α-Amylase Inhibitor from Streptomyces chartreusis

A new polypeptide inhibitor, AI-409, that inhibits human salivary α-Amylase, was purified from a fermentation broth of Streptomyces chartreusis strain No. 409. This protein consists of a single-chain polypeptide of 78 amino acid residues, and includes two disulfide bridges. The primary structure of AI-409 and the locations of the disulfide bridges were identified by enzymatic digestion and the automatic Edman technique. Enzymatic digestion was done with trypsin, carboxypeptidase Y, and chymotrypsin. One of the disulfide bridges was between Cys(10) and Cys(26), and the other between Cys(44) and Cys(71).     

Human surfactant polypeptide SP-B. Disulfide bridges, C-terminal end, and peptide analysis of the airway form.

Human hydrophobic surfactant polypeptide, SP-B, purified from lung tissue by exclusion chromatography in organic solvents, has been characterized. The polypeptide is 79 residues long, has a C-terminal methionine, and contains seven Cys residues. Native human SP-B lacks free thiol groups. Three intrachain disulfide bridges were defined, linking Cys8 to Cys77, Cys11 to Cys71 and Cys35 to Cys46. The remaining Cys48 is concluded to link the protein chains into homodimers via an interchain disulfide to its counterpart in a second SP-B polypeptide. These SS bridges are identical to those in the porcine form and confirm a consestant and unique disulfide pattern for SP-B polypeptides in general.     

Cysteine cross-linking defines part of the dimer and B/C domain interface of the Escherichia coli mannitol permease

Part of the dimer and B/C domain interface of the Escherichia coli mannitol permease (EII(mtl)) has been identified by the generation of disulfide bridges in a single-cysteine EII(mtl), with only the activity linked Cys(384) in the B domain, and in a double-cysteine EII(mtl) with cysteines at positions 384 and 124 in the first cytoplasmic loop of the C domain. The disulfide bridges were formed in the enzyme in inside-out membrane vesicles and in the purified enzyme by oxidation with Cu(II)-(1,10-phenanthroline)(3), and they were visualized by SDS-polyacrylamide gel electrophoresis. Discrimination between possible disulfide bridges in the dimeric double-cysteine EII(mtl) was done by partial digestion of the protein and the formation of heterodimers, in which the cysteines were located either on different subunits or on one subunit. The disulfide bridges that were identified are an intersubunit Cys(384)-Cys(384), an intersubunit Cys(124)-Cys(124), an intersubunit Cys(384)-Cys(124), and an intrasubunit Cys(384)-Cys(124). The disulfide bridges between the B and C domain were observed with purified enzyme and confirmed by matrix-assisted laser desorption ionization-time of flight mass spectrometry. Mannitol did not influence the formation of the disulfide between Cys(384) and Cys(124). The close proximity of the two cysteines 124 was further confirmed with a separate C domain by oxidation with Cu(II)-(1,10-phenanthroline)(3) or by reactions with dimaleimides of different length. The data in combination with other work show that the first cytoplasmic loop around residue 124 is located at the dimer interface and involved in the interaction between the B and C domain.     

The covalent structure of the elastase inhibitor from Anemonia sulcata--a "non-classical" Kazal-type protein

The amino-acid sequence of the proteinase inhibitor specific for elastases from the sea anemone Anemonia sulcata was determined from performic-acid oxidized inhibitor and from three cyanogen bromide fragments of reduced and carboxymethylated inhibitor. The molecule consists of a single polypeptide chain formed from 48 amino-acid residues and is stabilized by three intramolecular disulfide bridges. After cyanogen bromide cleavage of the native protein at methionines 10 and 28 followed by chymotryptic cleavage two fragments each containing a single disulfide bridge were isolated. These indicated the location of three intramolecular disulfide linkages between Cys4 and Cys34 (part of A-loop), Cys8 and Cys27 (B-loop) and Cys16 and Cys48 (C-loop). The sequential homology and the disulfide pattern identified the elastase inhibitor as a Kazal-type inhibitor in which, however, not only the CysI-CysII segment is rather short but interestingly the Cys4-Cys34 disulfide anchoring point (i.e. CysI-CysV) in the C-loop is shifted by one turn in the alpha-helical segment towards the C-terminus. Thus, the elastase inhibitor is a non-classical Kazal-type inhibitor with respect to the positioning of the half-cystines. The inhibitor molecule was modelled based on the known three-dimensional structure of the silver pheasant ovomucoid third domain. The shortened amino-terminal segment was arranged in such a manner to allow disulfide bridge formation between the first cysteine Cys4 and the replaced Cys34 under maintenance of a suitable binding loop conformation. The characteristic ovomucoid scaffold consisting of a central alpha-helix, an adjacent three-stranded beta-sheet and the proteinase-binding loop cross-connected through disulfide bridges CysI-CysV and CysIII-CysVI was conserved.     

Kiwi protein inhibitor of pectin methylesterase amino-acid sequence and structural importance of two disulfide bridges.

A protein acting as a powerful inhibitor of plant pectin methylesterase was isolated from kiwi (Actinidia chinensis) fruit. The complete amino-acid sequence of the pectin methylesterase inhibitor (PMEI) was determined by direct protein analysis. The sequence comprises 152 amino-acid residues, accounting for a molecular mass of 16 277 Da. The far-UV CD spectrum indicated a predominant alpha-helix conformation in the secondary structure. The protein has five cysteine residues but neither tryptophan nor methionine. Analysis of fragments obtained after digestion of the protein alkylated without previous reduction identified two disulfide bridges connecting Cys9 with Cys18, and Cys74 with Cys114; Cys140 bears a free thiol group. A database search pointed out a similarity between PMEI and plant invertase inhibitors. In particular, the four Cys residues, which in PMEI are involved in the disulfide bridges, are conserved. This allows us to infer that also in the homologous proteins, whose primary structure was deduced only by cDNA sequencing, those cysteine residues are engaged in two disulfide bridges, and constitute a common structural motif. The comparison of the sequence of these inhibitors confirms the existence of a novel class of proteins with moderate but significant sequence conservation, comprising plant proteins acting as inhibitors of sugar metabolism enzymes, and probably involved in various steps of plant development.     

Profile of the disulfide bonds in acetylcholinesterase

The inter- and intrasubunit disulfide bridges for the 11 S form of acetylcholinesterase isolated from Torpedo californica have been identified. Localized within the basal lamina of the synapse, the dimensionally asymmetric forms of acetylcholinesterase contain either two (13 S) or three (17 S) sets of catalytic subunits linked to collagenous and noncollagenous structural subunits. Limited proteolysis of these molecules yields a tetramer of catalytic subunits that sediments at 11 S. Each catalytic subunit contains 8 cysteine residues which were identified following tryptic digestion of the reduced, 14C-carboxymethylated protein. The tryptic peptides were purified by gel filtration followed by reverse-phase high performance liquid chromatography (HPLC) and then sequenced. The disulfide bonding profile was determined by treating the native, nonreduced 11 S form of acetylcholinesterase with a fluorescent, sulfhydryl-specific reagent, monobromobimane, prior to tryptic digestion. Peptides again were resolved by gel filtration and reverse-phase HPLC. One fluorescent cysteine-containing peptide was identified, indicating that a single sulfhydryl residue, Cys231, was present in its reduced form. Three pairs of disulfide-bonded peptides were identified. These were localized in the polypeptide chain based on the cDNA-deduced sequence of the protein and were identified as Cys67-Cys94, Cys254-Cys265, and Cys402-Cys521. Hence, three loops are found in the secondary structure. Cys572, located in the carboxyl-terminal tryptic peptide, was disulfide-bonded to an identical peptide and most likely forms an intersubunit cross-link. Since the 6 cysteine residues in acetylcholinesterase that are involved in intrachain disulfide bonds are conserved in the sequence of the homologous protein thyroglobulin, it is likely that both proteins share a common folding pattern in their respective tertiary structures. Cys231 and the carboxyl-terminal cysteine residue Cys572 are not conserved in thyroglobulin.     

Disulfide bonds in neurotoxin-III from the sea anenome Radianthus macrodactylus

Positions of the three disulfide bridges in neurotoxin-III (RTX-III) from sea anemone Radianthus macrodactylus were determined: Cys3--Cys43, Cys5--Cys33, Cys26--Cys44. The cystine-containing peptides obtained by the staphylococcal proteinase/trypsin digestion of the intact RTX-III were investigated.     

Amino acid sequence of protein alpha-amylase inhibitor from Streptomyces griseosporeus YM-25

The amino acid sequence of a protein alpha-amylase inhibitor from Streptomyces griseosporeus YM-25 (Haim II), which consists of 77 amino acid residues, including two disulfide bridges, was determined by conventional methods. One of the disulfide bridges was found to be located between Cys(6) and Cys(22), and the other between Cys(40) and Cys(67) from the results of structure analyses of the two cystine-containing peptides obtained from the thermolysin digest of the native inhibitor.     

Assignment of the Disulfide Bridges in Bothropstoxin-I, a Myonecrotic Lys49 PLA2 Homolog from Bothrops jararacussu Snake Venom

Bothropstoxin-I (BthTX-I), a Lys49 phospholipase A₂ homolog with no apparent catalytic activity, was first isolated from Bothrops jararacussu snake venom and completely sequenced in this laboratory. It is a 121-amino-acid single polypeptide chain, highly myonecrotic, despite its inability to catalyze hydrolysis of egg yolk phospholipids, and has 14 half-cystine residues identified at positions 27, 29, 44, 45, 50, 51, 61, 84, 91, 96, 98, 105, 123, and 131 (numbering according to the conventional alignment including gaps, so that the last residue is Cys 131). In order to access its seven disulfide bridges, two strategies were followed: (1) Sequencing of isolated peptides from (tryptic + SV₈) and chymotryptic digests by Edman-dansyl degradation; (2) crystallization of the protein and determination of the crystal structure so that at least two additional disulfide bridges could be identified in the final electron density map. Identification of the disulfide-containing peptides from the enzymatic digests was achieved following the disappearance of the original peptides from the HPLC profile after reduction and carboxymethylation of the digest. Following this procedure, four bridges were initially identified from the tryptic and SV₈ digests: Cys50-Cys131, Cys51-Cys98, Cys61-Cys91, and Cys84-Cys96. From the chymotryptic digest other peptides were isolated either containing some of the above bridges, therefore confirming the results from the tryptic digest, or presenting a new bond between Cys27 and Cys123. The two remaining bridges were identified as Cys29-Cys45 and Cys44-Cys105 by determination of the crystal structure, showing that BthTX-I disulfide bonds follow the normal pattern of group II PLA₂s.     

Determination of glycosylation sites, disulfide bridges, and the C-terminus of Stereum purpureum mature endopolygalacturonase I by electrospray ionization mass spectrometry.

Stereum purpureum endopolygalacturonase (endoPG; EC 3.2.1.15) is a causal protein for silver-leaf disease in apple trees. Endopolygalacturonase I, is a mixture of three components (Ia, Ib, and Ic) that produce three bands on SDS/PAGE but have the same polypeptide and sugar chains. Electrospray ionization mass spectrometry (ESI-MS) analysis of three endoPG I proteins and deglycosylated endoPG Ia revealed a molecular mass of 37 068, 38 285, and 39 503 for Ia, Ib, and Ic, respectively; the number of N-binding sugar chains matches that of a high-mannose type of sugar chain. Two, three, and four sugar chains are present in endoPG Ia, Ib, and Ic, respectively. Deletion of 44 amino acids from the deduced sequence occurred in the C-terminal region. Positions of the glycosylation sites and disulfide bridges were decided by tryptic digestion followed by liquid chromatography-electrospray mass spectrometry (LC-ESI-MS) analysis of reductive and nonreductive pyridylethylated endoPG I proteins. The glycosylated asparagines were determined to be Asn92 and 161; Asn92, 161, 279, or 302; and Asn92, 161, 279, and 302 in Ia, Ib, and Ic, respectively. Three disulfide bridges were noted at Cys3-Cys17, Cys175-Cys191, and Cys300-Cys303. These results are the first findings for fungal endoPG and may contribute to clarification of the relationship between stereostructure and catalytic activity.     

Stereoselective disulfide formation stabilizes the local peptide conformation in nisin mimics

Nisin is a polymacrocyclic peptide antimicrobial with high activity against Gram-positive bacteria. Lanthionine and methyllanthionine bridges, closing the macrocycles, are stabilized by thioether bonds, formed between cysteines and dehydrated serine or threonine. The role of polypeptide backbone conformation in the formation of macrocycles A and B within cysteine mutants of nisin residues 1?12 is investigated here by molecular dynamics simulations. Enantiomeric combinational space of Cys3 and Cys7 and of Cys8 and Cys11 is examined for the preference of disulfide bond formation over helical turn formation within this region. A clear preference for spontaneous disulfide formation and closure of rings 3,7 and 8,11 is demonstrated for the D-Cys3, D-Cys7, L-Cys8, L-Cys11 nisin homologue, while interlinked rings A and B are obtained through disulfide bridges between L-Cys3 and D-Cys8 and between D-Cys7 and D-Cys11. This study offers a simple designer approach to solid phase synthesis of macrocyclic peptides and lantibiotic analogues.     

Complete primary structure of a galactose-specific lectin from the venom of the rattlesnake Crotalus atrox. Homologies with Ca2(+)-dependent-type lectins

The complete primary structure of a galactose-specific lectin contained in the venom of the rattlesnake, Crotalus atrox, was determined. The lectin is composed of two covalently linked, identical subunits, each consisting of 135 amino acid residues. Under physiological conditions the lectin proved to be highly aggregated. The venom lectin contained 9 half-cystines, 8 of which formed four intrasubunit disulfide bridges (Cys3-Cys14, Cys31-Cys131, Cys38-Cys133, and Cys106-Cys123), while Cys86 was involved in an intersubunit disulfide bridge. Because of the high content of disulfide bridges, the intact lectin was extremely resistant to tryptic digestion. The determined amino acid sequence was found to be homologous with those of the so-called carbohydrate recognition domains of Ca2(+)-dependent-type lectins in animal. Among them, 8 amino acid residues (Cys31, Gly69, Trp92, Pro97, Cys106, Asp120, Cys123, and Cys131) were completely conserved. Leu40, Trp67, and Trp81 were also well conserved. The rattlesnake venom lectin showed high hemagglutinating activity. These results, together with the occurrence of similar lectins in crotalid venoms, suggest that these lectins have evolved in order to make the venom a more effective weapon to capture prey animals.     

Maurotoxin and the Kv1.1 channel: voltage-dependent binding upon enantiomerization of the scorpion toxin disulfide bridge Cys31-Cys34.

Maurotoxin (MTX) is a 34-amino acid polypeptide cross-linked by four disulfide bridges that has been isolated from the venom of the scorpion Scorpio maurus palmatus and characterized. Maurotoxin competed with radiolabeled apamin and kaliotoxin for binding to rat brain synaptosomes and blocked K+ currents from Kv1 channel subtypes expressed in Xenopus oocytes. Structural characterization of the synthetic toxin identified half-cystine pairings at Cys3-Cys24, Cys9-Cys29, Cys13-Cys19 and Cys31-Cys34 This disulfide bridge pattern is unique among known scorpion toxins, particularly the existence of a C-terminal '14-membered disulfide ring' (i.e. cyclic domain 31-34), We therefore studied structure-activity relationships by investigating the structure and pharmacological properties of synthetic MTX peptides either modified at the C-terminus ?i.e. MTX(1-29), [Abu31,34]-MTX and [Cys31,34, Tyr32]D-MTX) or mimicking the cyclic C-terminal domain [i.e. MTX(31-34)]. Unexpectedly, the absence of a disulfide bridge Cys31-Cys34 in [Abu 31,34]-MTX and MTX(1-29) resulted in MTX-unrelated half-cystine pairings of the three remaining disulfide bridges for the two analogs, which is likely to be responsible for their inactivity against Kv1 channel subtypes. Cyclic MTX(31-34) was also biologically inactive. [Cys31,34, Tyr32]D-MTX, which had a 'native', MTX-related, disulfide bridge organization, but a D-residue-induced reorientation of the C-terminal disulfide bridge, was potent at blocking the Kv1.1 channel. This peptide-induced Kv1.1 blockage was voltage-dependent (a property not observed for MTX), maximal in the low depolarization range and associated with on-rate changes in ligand binding. Thus, the cyclic C-terminal domain of MTX seems to be crucial for recognition of Kv1.3, and to a lesser extent, Kv1.2 channels and it may contribute to the stabilization and strength of the interaction between the toxin and the Kv1.1 channel.     

Two-step selective formation of three disulfide bridges in the synthesis of the C-terminal epidermal growth factor-like domain in human blood coagulation factor IX.

The 45-residue C-terminal EGF-like domain in human blood coagulation factor IX has been synthesized by a 2-step method to form selectively 3 disulfide bridges. Four out of 6 cysteines are blocked with either trityl or 4-methyl-benzyl, and the remaining 2 cysteines are blocked with acetamidomethyl (Acm). In the first step, 4 free cysteinyl thiols are released concurrently with the removal of all protecting groups except Acm and are oxidized to form 1 of the 3 possible isomers containing 2 pairs of disulfides. In the second step, iodine is used to remove the Acm groups to yield the third disulfide bridge. This approach reduces the number of possible disulfide bridging patterns from 15 to 3. To determine the optimal protecting group strategy, 3 peptides are synthesized, each with Acm blocking 1 of the 3 pairs of cysteines involved in disulfide bridges: Cys5 to Cys16 (Cys 1-3), Cys12 to Cys26 (Cys 2-4), or Cys28 to Cys41 (Cys 5-6). Only the peptide having the Cys 2-4 pair blocked with Acm forms the desired disulfide isomer (Cys 1-3/5-6) in high yield after the first step folding, as identified by proteolytic digestion in conjunction with mass spectrometric peptide mapping. Thus, the choice of which pair of cysteines to block with Acm is critically important. In the case of EGF-like peptides, it is better to place the Acm blocking groups on one of the pairs of cysteines involved in the crossing of disulfide bonds.     

The complete covalent structure of hirudin. Localization of the disulfide bonds

Hirudin, the thrombin-specific inhibitor from the leech Hirudo medicinalis, is a single-chain polypeptide (65 amino-acid residues) linked by three disulfide bridges. Localization of the three disulfide bonds could be assigned on the basis of the structures of cystine peptides derived by high performance liquid chromatography separations of thermolysinolytic digest of native hirudin. By characterization of the nine major fragments by amino-acid analysis, N-terminal amino-acid determination and sequence analysis, the following disulfide linkages were identified: Cys6-Cys14, Cys16-Cys28 and Cys22-Cys39. Due to the lack of any closer sequence homology and topological structural homology to other serine proteinase inhibitor proteins, hirudin seems to be unique in its primary structure and hence designates an unknown inhibitor family.     

Assignment of the disulfide bonds of Ole e 1, a major allergen of olive tree pollen involved in fertilization.

The most prevalent allergen from olive tree pollen, Ole e 1, consists of a single polymorphic polypeptide chain of 145 amino acids which includes six cysteine residues at positions 19, 22, 43, 78, 90 and 131. By using an homogeneous form of the allergen expressed in Pichia pastoris, the array of the disulfide bridges has been elucidated. Specific proteolysis with thermolysin and reverse-phase HPLC separation of the peptides allowed the determination of the disulfide bond between Cys43 and Cys78. Another thermolytic product, which contained three peptides linked by the remaining four cysteines, was digested with Glu-specific staphylococcal V8 protease and the products isolated by reverse-phase HPLC. Amino acid compositions and Edman degradation of the peptide products indicated the presence of the disulfide bonds at Cys19-Cys90 and Cys22-Cys131. These data can help in the analysis of the three-dimensional structure of the protein as well as in studies of its allergenic determinants.     

Close location of the first loop to the third loop of the mitochondrial ADP/ATP carrier deduced from cross-linking catalyzed by copper-o-phenanthroline of the solubilized carrier with Triton X-100

Effects of the cross-linking catalyst copper-o-phenanthroline [Cu(OP)2] on the bovine heart mitochondrial ADP/ATP carrier solubilized with Triton X-100 were studied under various conditions. Without detergent treatment, Cu(OP)2 specifically catalyzed the formation of intermolecular disulfide bridges in submitochondrial particles between two Cys56 residues in the first loop facing the matrix space of the dimeric carrier [Majima, E., Ikawa, K., Takeda, M., Hashimoto, M., Shinohara, Y., and Terada, H. (1995) J. Biol. Chem. 270, 29548-29554]. However, an intramolecular disulfide bridge between Cys56 and Cys256 in the third loop was formed in the solubilized carrier. Proteolytic digestion of the carrier with lysylendopeptidase showed that it first cleaves the Lys42-Gln43 bond and then the Lys48-Gln49 bond of the first loop in the membrane-bound carrier, but it cleaves both sites almost simultaneously in the solubilized carrier. These features were observed only with the m-state carrier; the c-state carrier was not subject to any cross-linking or proteolytic digestion. It is suggested that the protruding first loop is located close to the third loop, which could be exposed to a certain degree.     

Controlled syntheses of natural and disulfide-mispaired regioisomers of alpha-conotoxin SI.

Methods are reported for the unambiguous syntheses of all three possible disulfide regioisomers with the sequence of alpha-conotoxin SI, a tridecapeptide amide from marine cone snail venom that binds selectively to the muscle subtype of nicotinic acetylcholine receptors. The naturally occurring peptide has two 'interlocking' disulfide bridges connecting Cys2-Cys7 and Cys3-Cys13 (2/7&3/13), while in the two mispaired isomers the disulfide bridges connect Cys2-Cys13 and Cys3-Cys7 (2/13 & 3/7, 'nested') and Cys2-Cys3 and Cys7-Cys13 (2/3 & 7/13, 'discrete'), respectively. Alignment of disulfide bridges was controlled at the level of orthogonal protection schemes for the linear precursors, assembled by Fmoc solid-phase peptide synthesis on acidolyzable tris(alkoxy)benzylamide (PAL) supports. Side-chain protection of cysteine was provided by suitable pairwise combination of the S-9H-xanthen-9-yl (Xan) and S-acetamidomethyl (Acm) protecting groups. The first disulfide bridge was formed from the corresponding bis(thiol) precursor obtained by selective deprotection of S-Xan, and the second disulfide bridge was formed by orthogonal co-oxidation of S-Acm groups on the remaining two Cys residues. It was possible to achieve the desired alignments with either order of loop formation (smaller loop before larger, or vice versa). The highest overall yields were obtained when both disulfides were formed in solution, while experiments where either the first or both bridges were formed while the peptide was on the solid support revealed lower overall yields and poorer selectivities towards the desired isomers.     

Stability of protein-bound conformations of bioactive peptides: the folded conformation of an epidermal growth factor-like thrombomodulin fragment is similar to that recognized by thrombin

The relationship between the free and bound conformations of bioactive peptides is explored using the epidermal growth factor (EGF)-like thrombomodulin fragment hTM409-426 as a model system. The hTM409-426 peptide has a sequence of C(409)PEGYILDDGFIC(421)TDIDE (with a disulfide bond between Cys409 and Cys421) and is a selective inhibitor of thrombin. Upon binding to thrombin, hTM409-426 adopts a well-defined conformation-namely, a beta-turn followed by an antiparallel beta-sheet, similar to those found in all other EGF-like protein repeats (Hrabal et al., Protein Science, 1996, Vol. 5, 195-203). Here we demonstrate that, at pH 6.8 and at 25 degrees C, the hTM409-426 peptide in the free state is very flexible, but still populates a type II beta-turn over residues Pro410-Glu411-Gly412-Tyr413 and the clustering of some hydrophobic side chains, both of which are present in the thrombin-bound conformation. At a lower temperature of 5 degrees C, significant conformational shifts of the C alpha H proton resonances and extensive medium- and long-range NOEs are observed, indicating the presence of folded conformations with unique backbone-backbone and side-chain interactions. A comparison of the NOE patterns in the free state with transferred NOEs shows that the free-state folded and the thrombin-bound conformations of the hTM409-426 peptide are very similar, particularly over residues Pro410-Ile424. The folded conformation of hTM409-426 appears to be stabilized by two hydrophobic clusters, one formed by the side chains of residues Pro410, Tyr413, Leu415, and Phe419 and the Cys409-Cys421 disulfide bond, the second involving residues Ile414 and Ile424. These results indicate that the overall topology of the thrombin-bound conformation of the hTM409-426 peptide is prefolded in the free state and the primary sequence (including the disulfide bond) may be selective for an ensemble of conformations similar to that recognized by thrombin.     

Location of disulfide bonds within the sequence of human serum cholinesterase

Human serum cholinesterase was digested with pepsin under conditions which left disulfide bonds intact. Peptides were isolated by high pressure liquid chromatography, and those containing disulfide bonds were identified by a color assay. Peptides were characterized by amino acid sequencing and composition analysis. Human serum cholinesterase contains 8 half-cystines in each subunit of 574 amino acids. Six of these form three internal disulfide bridges: between Cys65-Cys92, Cys252-Cys263, and Cys400-Cys519. A disulfide bond with Cys65 rather than Cys66 was inferred by homology with Torpedo acetylcholinesterase. Cys571 forms a disulfide bridge with Cys571 of an identical subunit. This interchain disulfide bridge is four amino acids from the carboxyl terminus. A peptide containing the interchain disulfide is readily cleaved from cholinesterase by trypsin (Lockridge, O., and La Du, B. N. (1982) J. Biol. Chem. 257, 12012-12018), suggesting that the carboxyl terminus is near the surface of the globular tetrameric protein. The disulfide bridges in human cholinesterase have exactly the same location as in Torpedo californica acetylcholinesterase. There is one potential free sulfhydryl in human cholinesterase at Cys66, but this sulfhydryl could not be alkylated. Comparison of human cholinesterase, and Torpedo and Drosophila acetylcholinesterases to the serine proteases suggests that the cholinesterases constitute a separate family of serine esterases, distinct from the trypsin family and from subtilisin.