Production of Methyl Ketones from Secondary Alcohols by Cell Suspensions of C(2) to C(4)n-Alkane-Grown Bacteria

Nineteen new C(2) to C(4)n-alkane-grown cultures were isolated from lake water from Warinanco Park, Linden, N.J., and from lake and soil samples from Bayway Refinery, Linden, N.J. Fifteen known liquid alkane-utilizing cultures were also found to be able to grow on C(2) to C(4)n-alkanes. Cell suspensions of these C(2) to C(4)n-alkane-grown bacteria oxidized 2-alcohols (2-propanol, 2-butanol, 2-pentanol, and 2-hexanol) to their corresponding methyl ketones. The product methyl ketones accumulated extracellularly. Cells grown on 1-propanol or 2-propanol oxidized both primary and secondary alcohols. In addition, the activity for production of methyl ketones from secondary alcohols was found in cells grown on either alkanes, alcohols, or alkylamines, indicating that the enzyme(s) responsible for this reaction is constitutive. The optimum conditions for in vivo methyl ketone formation from secondary alcohols were compared among selected strains: Brevibacterium sp. strain CRL56, Nocardia paraffinica ATCC 21198, and Pseudomonas fluorescens NRRL B-1244. The rates for the oxidation of secondary alcohols were linear for the first 3 h of incubation. Among secondary alcohols, 2-propanol and 2-butanol were oxidized at the highest rate. A pH around 8.0 to 9.0 was found to be the optimum for acetone or 2-butanone formation from 2-alcohols. The temperature optimum for the production of acetone or 2-butanone from 2-propanol or 2-butanol was rather high at 60 degrees C, indicating that the enzyme involved in the reaction is relatively thermally stable. Metal-chelating agents inhibit the production of methyl ketones, suggesting the involvement of a metal(s) in the oxidation of secondary alcohols. Secondary alcohol dehydrogenase activity was found in the cell-free soluble fraction; this activity requires a cofactor, specifically NAD. Propane monooxygenase activity was also found in the cell-free soluble fraction. It is a nonspecific enzyme catalyzing both terminal and subterminal oxidation of n-alkanes.     

Synthesis and properties of new photoactivable derivatives of tetrodotoxin

Eight lots of reagent-grade phenol from four companies were tested for capacity to interact with Cu2+ to produce an inactivator or inactivators of the transfective RNA obtained from poliovirions; such capacity to interact with Cu2+ is referred to as cofactor activity. Six of the lots showed cofactor activity; two did not. A review of the data on the phenol lots and of the properties of the impurity or impurities conferring cofactor activity suggested that the active impurity(ies) might be a dihydric or trihydric phenol. Commercial catechol, resorcinol, hydroquinone, orcinol and pyrogallol were tested and found active. The activity of hydroquinone was outstandingly high. Upon serial recrystallization, the activity of catechol, hydroquinone, orcinol and pyrogallol remained constant, but the activity of resorcinol decreased markedly, in stepwise fashion, showing the most of the activity of the commercial resorcinol was due to impurity(ies). Each of catechol, hydroquinone, orcinol, pyrogallol, and the commercial resorcinol was shown to react with Cu2+ to produce inactivator(s). The effective target for inactivator(s) was the RNA and not the transfection process. The kinetics of inactivator(s) production varied for the different phenols, and the inactivator activity of the incubated mixture of pyrogallol and Cu2+ was notably labile.     

Microbial oxidation of gaseous hydrocarbons: production of methyl ketones from their corresponding secondary alcohols by methane- and methanol-grown microbes.

Cultures of methane- or methanol-utilizing microbes, including obligate (both types I and II) and facultative methylotrophic bacteria, obligate methanol utilizers, and methanol-grown yeasts were isolated from lake water of Warinanco Park, Linden, N.J., and lake and soil samples of Bayway Refinery, Linden, N.J. Resting-cell suspensions of these, and of other known C1-utilizing microbes, oxidized secondary alcohols to their corresponding methyl ketones. The product methyl ketones accumulated extracellularly. Succinate-grown cells of facultative methylotrophs did not oxidize secondary alcohols. Among the secondary alcohols, 2-butanol was oxidized at the highest rate. The optimal conditions for in vivo methyl ketone formation were compared among five different types of C1-utilizing microbes. Some enzymatic degradation of 2-butanone was observed. The product, 2-butanone, did not inhibit the oxidation of 2-butanol. The rate of the 2-butanone production was linear for the first 4 h of incubation for all five cultures tested. A yeast culture had the highest production rate. The optimum temperature for the production of 2-butanone was 35 degrees C for all the bacteria tested. The yeast culture had a higher temperature optimum (40 degrees C), and there was a reasonably high 2-butanone production rate even at 45 degrees C. Metal-chelating agents inhibit the production of 2-butanone, suggesting the involvement of metal(s) in the oxidation of secondary alcohols. Secondary alcohol dehydrogenase activity was found in the cell-free soluble extract of sonically disrupted cells. The cell-free system requires a cofactor, specifically nicotinamide adenine dinucleotide, for its activity. This is the first report of a nicotinamide adenine dinucleotide-dependent, secondary alcohol-specific enzyme.     

Stabilization of prostaglandin synthetase by immobilization of goat seminal microsomes on silica gel-G

Prostaglandin synthetase was immobilized by adsorption of goat vesicular microsomes on silica gel containing CaSO4 (silica gel G). Repeated cycles of enzymatic conversion of arachidonic acid to prostaglandin by the immobilized microsomes increased the product yield by 1.5 fold, in comparison to the same by free microsomal particles. The presence of Ca2+ in silica gel is responsible for this improved yield of prostaglandin as the divalent metal ion stabilized prostaglandin synthetase activity in a remarkable way. Microsomal particles immobilized on solid supports like alumina G and controlled pore glass were not very effective.     

In vivo interaction between alveolar macrophages and Cryptococcus neoformans

In vivo interactions of rabbit alveolar macrophages (AM) and Cryptococcus neoformans, a yeast pathogenic for humans, were studied. As a control, inert silica particles of a similar diameter (5–6 μm) were used. Of 16 rabbits, 6 were instilled intratracheally with fluorescein-labelled heat-killed C. neoformans, 6 with fluorescein-labelled silica particles and 4 with saline only. After 24 h, the AM were collected by lung lavage, and phagocytosis, oxidative metabolism, phagolysosomal pH and morphology were studied. The accumulated number of yeasts attached to the AM was almost the same for C. neoformans as for the silica particles. The ingested fraction of C. neoformans was even higher than that of the silica particles. Quantitative NBT reduction by the AM, reflecting their oxidative metabolism, was markedly increased by exposure to C. neoformans for 24 h. The phagolysosomal pH was on the average lower in phagolysosomes with C. neoformans than with the silica particles, although approximately 2% of the phagolysosomes with C. neoformans had neutral pH. Phagolysosomes with neutral pH was not observed for silica particles. Electron microscopy showed presence of C. neoformans in phagolysosomes of AM. The conclusion of this study is that the phagocytic activity, oxidative metabolism and phagolysosomal pH AM against C. neoformans are significant 24 h after the exposure. This revised version was published online in June 2006 with corrections to the Cover Date.     

Microbial Oxidation of Gaseous Hydrocarbons: Production of Methyl Ketones from Their Corresponding Secondary Alcohols by Methane- and Methanol-Grown Microbes

Cultures of methane- or methanol-utilizing microbes, including obligate (both types I and II) and facultative methylotrophic bacteria, obligate methanol utilizers, and methanol-grown yeasts were isolated from lake water of Warinanco Park, Linden, N.J., and lake and soil samples of Bayway Refinery, Linden, N.J. Resting-cell suspensions of these, and of other known C1-utilizing microbes, oxidized secondary alcohols to their corresponding methyl ketones. The product methyl ketones accumulated extracellularly. Succinate-grown cells of facultative methylotrophs did not oxidize secondary alcohols. Among the secondary alcohols, 2-butanol was oxidized at the highest rate. The optimal conditions for in vivo methyl ketone formation were compared among five different types of C1-utilizing microbes. Some enzymatic degradation of 2-butanone was observed. The product, 2-butanone, did not inhibit the oxidation of 2-butanol. The rate of the 2-butanone production was linear for the first 4 h of incubation for all five cultures tested. A yeast culture had the highest production rate. The optimum temperature for the production of 2-butanone was 35°C for all the bacteria tested. The yeast culture had a higher temperature optimum (40°C), and there was a reasonably high 2-butanone production rate even at 45°C. Metal-chelating agents inhibit the production of 2-butanone, suggesting the involvement of metal(s) in the oxidation of secondary alcohols. Secondary alcohol dehydrogenase activity was found in the cell-free soluble extract of sonically disrupted cells. The cell-free system requires a cofactor, specifically nicotinamide adenine dinucleotide, for its activity. This is the first report of a nicotinamide adenine dinucleotide-dependent, secondary alcohol-specific enzyme.     

Evaluation of a silica-coated magnetic nanoparticle for the immobilization of a His-tagged lipase

Magnetic particles of size 10 nm have been coated with silica to a mean diameter of 40 nm and charged with Cu²⁺ ions via a multidentate ligand, iminodiacetic acid (IDA), for the immobilization of His-tagged Bacillus stearothermopilus L1 lipase. Microporous (average pore diameter of 60 Å) silica gel with a mean particle diameter of 115 µm has been used as a comparative support material. The molar ratio of Cu²⁺ to IDA was found to be 1:1.14 and 1:1.99 in the silica gel and the silica-coated magnetic nanoparticles (SiMNs), respectively. The specific activity of the immobilized enzyme was found to conform to the following order: Cu²⁺-charged SiMN>SiMN>Cu²⁺-charged silica gel>silica gel. When it was immobilized on the Cu²⁺-charged SiMNs, over 70% of the initial activity of the lipase remained after it had been reused five times. However, only 20% of the initial activity remained after the enzyme immobilized on the Cu²⁺-charged silica gel had been reused five times. For the enzyme immobilized on supports without Cu²⁺ cations, all activity was lost after threefold reuse. The differences in the specific activities and the efficiencies of reuse of the enzymes immobilized on the various support materials are discussed in terms of immobilization mechanisms (physical adsorption vs. coordination bonding), mass transfer of a substrate and a product of the enzyme reaction, and the status of the Cu (Cu bound to the IDA on the silica layer vs. Cu directly adsorbed on the silica layer).     

Complement receptor-mediated phagocytosis is associated with accumulation of phosphatidylcholine-derived diglyceride in human neutrophils. Involvement of phospholipase D and direct evidence for a positive feedback signal of protein kinase.

Complement receptor (CR)-mediated phagocytosis is associated with an increased accumulation of diglyceride (sn-1,2-diacylglycerol and/or 1-O-alkyl-2-acyl-glycerol) in human neutrophils. The C3bi-mediated increase in diglyceride (5-20 min) was only partially impaired when phosphoinositide-specific phospholipase C (PLC) activity was abolished by reduction of cytosolic free Ca2+. At an early time point (1 min), however, diglyceride production was barely detectable in control cells, whereas production was considerable in cells with a reduced cytosolic free Ca2+ concentration. C3bi stimulation of 32P-labeled neutrophils caused a rapid and significant breakdown of [32P]phosphatidylcholine (PC) which was not affected by inhibition of Ca(2+)-dependent phosphoinositide-specific PLC. Thus, PC hydrolysis could be involved in C3bi-induced diglyceride formation. Stimulation of cells labeled with [3H]1-O-alkyl-lyso-PC ([3H]alkyl-lyso-PC), resulted in an increased formation of [3H]1-O-alkyl-phosphatidic acid ([3H]alkyl-PA) and a later and slower formation of [3H]1-O-alkyl-diglyceride ([3H]alkyl-diglyceride); this suggests activation of phospholipase D (PLD). When these labeled cells were stimulated in the presence of 0.5% ethanol a marked accumulation of [3H]1-O-alkyl-phosphatidylethanol ([3H]alkyl-PEt) was observed in both controls and calcium-reduced cells, further strengthening the suggested involvement of PLD activity. In parallel with the sustained increase in diglyceride formation, CR-mediated phagocytosis was also associated with phosphorylation of a cellular protein kinase C substrate (MARCKS). Therefore it seems reasonable to suggest a causal relationship between C3bi-induced PLD activation, which results in diglyceride formation, and activation of protein kinase C. In electropermeabilized cells which were incapable of ingesting particles, C3bi particles were still able to activate PLD and induce formation of diglyceride. This signaling event must therefore be triggered by binding of particles to the cell and not by the engulfment process. Most importantly, introduction of the protein kinase C inhibitor peptides, PKC(19-36) and PKC(19-31), into these permeabilized cells resulted in a clear reduction of the C3bi-induced production of diglyceride, indicating that CR-mediated activation of protein kinase C directly triggers a positive feedback mechanism for additional diglyceride formation. Taken together, these data further clarify the mechanisms of CR-mediated diglyceride formation and give added support to the concept that protein kinase C plays an important role in the phagocytic process.     

Trinary Layered Double Hydroxides as High‐Performance Bifunctional Materials for Oxygen Electrocatalysis

Layered double hydroxides (LDHs) are a family of high‐profile layer materials with tunable metal species and interlayer spacing, and herein the LDHs are first investigated as bifunctional electrocatalysts. It is found that trinary LDH containing nickel, cobalt, and iron (NiCoFe‐LDH) shows a reasonable bifunctional performance, while exploiting a preoxidation treatment can significantly enhance both oxygen reduction reaction and oxygen evolution reaction activity. This phenomenon is attributed to the partial conversion of Co²⁺ to Co³⁺ state in the preoxidation step, which stimulates the charge transfer to the catalyst surface. The practical application of the optimized material is demonstrated with a small potential hysteresis (800 mV for a reversible current density of 20 mA cm^?2) as well as a high stability, exceeding the performances of noble metal catalysts (commercial Pt/C and Ir/C). The combination of the electrochemical metrics and the facile and cost‐effective synthesis endows the trinary LDH as a promising bifunctional catalyst for a variety of applications, such as next‐generation regenerative fuel cells or metal–air batteries.     

Stem and microdiffraction studies of Rh/CeO2

Using scanning transmission electron microscopy (STEM) and microdiffraction techniques, information on structures of small Rh particles (2–3 nm) and the interaction between Rh particles and Ce oxide support has been obtained. It was found that Rh particles (around 2 nm in size) were frequently in epitaxial relationship to the CeO₂. Microdiffraction patterns also suggested that all Rh particles exist as pure F.C.C. metal single crystals and no evidence was found for any twinning or for oxidation. Double diffraction effects were prominent and care was needed in interpreting the microdiffraction patterns.     

Rhizopus oryzae IFO 4697 whole cell catalyzed methanolysis of crude and acidified rapeseed oils for biodiesel production in tert-butanol system

Whole cell Rhizopus oryzae (R. oryzae) IFO4697 immobilized within biomass support particles (BSPs) was used as catalyst for biodiesel production in tert-butanol, in which the stability of the catalyst could be enhanced significantly. Different feedstocks (refined, crude and acidified rapeseed oils) were adopted further for biodiesel production in tert-butanol system and it was found that when acidified rapeseed oil was used as feedstocks, the reaction rate and final methyl ester (ME) yield were significantly higher than that of refined and crude rapeseed oil. Major differences among the aforementioned oils were found to be the contents of free fatty acid (FFA), water and phospholipids, which showed varied influences on whole cell mediated methanolysis for biodiesel production. The reaction rate increased with the increase of free fatty acid content in oils; water content had varied influence on reaction rate and biodiesel yield; using adsorbent to remove excessive water could increase biodiesel yield significantly (from 73 to 84%); it was also found interestingly that phospholipids contained in oils could increase the reaction rate to a certain extent.     

Catalytic size control of multiwalled carbon nanotube diameter in xylene chemical vapor deposition process

Multiwalled carbon nanotubes (CNT) of diameters of 10-40 nm are synthesized on Fe and Co coated nm-scale catalyst support in a xylene chemical vapor deposition (CVD) process without the need for ferrocene iron source. Silica (∼40 nm diameter) and nanocrystalline Au (∼10 nm) are coated with a monolayer of amine, sulfonate, or thiol termination to ensure monolayer Fe loading, reduce Fe surface migration and reduce agglomeration of catalyst support particles during dispersion. Coordination with surface functionalization did not noticeably hinder Fe surface diffusion nor hinder catalytic activity of CNT formation. CNT diameters of ∼40 nm were seen for most chemical treatments. Functionalization of substrate (SiO₂/Si) surface with carboxylic termination aided in the dispersion of amine functionalized silica nanoparticles. Another approach to limit catalytic support to nm-scale dimensions was to deposit a thin film of Co (5-25 nm thick) in a multilayer structure that after etching left a nm-scale Co line at the edge of the pattern. In the ferrocene CVD process, CNT diameters down to 10 nm are controlled directly by the catalytic metal film thickness.     

Purification and characterization of NAD-dependent n-butanol dehydrogenase from solvent-tolerant n-butanol-degrading Enterobacter sp. VKGH12

The solvent-tolerant bacterium Enterobacter sp. VKGH12 is capable of utilizing n-butanol and contains an NAD+-dependent n-butanol dehydrogenase (BDH). The BDH from n-butanol-grown Enterobacter sp. was purified from a cell-free extract (soluble fraction) to near homogeneity using a 3-step procedure. The BDH was purified 15.37-fold with a recovery of only 10.51, and the molecular mass estimated to be 38 kDa. The apparent Michaelis-Menten constant (Km) for the BDH was found to be 4 mM with respect to n-butanol. The BDH also had a broad range of substrate specificity, including primary alcohols, secondary alcohols, and aromatic alcohols, and exhibited an optimal activity at pH 9.0 and 40oC. Among the metal ions studied, Mg2+ and Mn2+ had no effect, whereas Cu2+, Zn2+, and Fe2+ at 1 mM completely inhibited the BDH activity. The BDH activity was not inhibited by PMSF, suggesting that serine is not involved in the catalytic site. The known metal ion chelator EDTA had no effect on the BDH activity. Thus, in addition to its physiological significance, some features of the enzyme, such as its activity at an alkaline pH and broad range of substrate specificity, including primary and secondary alcohols, are attractive for application to the enzymatic conversion of alcohols.     

Nano Pd(0) supported on cellulose: a highly efficient and recyclable heterogeneous catalyst for the Suzuki coupling and aerobic oxidation of benzyl alcohols under liquid phase catalysis

Nano palladium(0) supported on cellulose was found to be highly efficient recyclable heterogeneous catalyst for the Suzuki coupling between aryl bromides and phenyl boronic acid in water and aerobic oxidation of benzyl alcohols using air as the source of molecular oxygen in acetonitrile. The Cell-Pd(0) was prepared by stirring commercially available cellulose with Pd(OAc)₂ in ethanol at 25 °C followed by reduction with hydrazine hydrate, leading finally to nano Pd(0) particles uniformly distributed on surface of cellulose. This catalytic system provides biaryls and polyaryls in excellent yields with very high turn over numbers via Suzuki coupling; and benzaldehyde derivatives in high yields and selectivity by oxidation in air. Cell-Pd(0) was characterized by X-ray diffraction techniques (XRD), thermal analysis (TGA), scanning electron microscope (SEM) and transmission electron microscope (TEM).     

New silica-immobilized hydroxypyrimidinone as sorbent of hard metal ions from aqueous fluids

The chemical modification of solid supports with chelators for the sorption of residual amounts of specific metal ions is of environmental and biological current interest. The present work describes the preparation and chelating properties of a new hydroxypyrimidinone-functionalized silica, (HOPY-PrN)-Si, with high affinity for hard metal ions. The new chelating matrix was obtained by coupling a 1-hydroxy-2-(1H)-pyrimidinone derivative, HOPY-PrN, to an epoxy-activated silica. It showed good stability at neutral and acidic conditions and high sequestering capacity for hard metal ions, namely Fe3+ and Al3+, as previously found for the corresponding sepharosic derivative. However, the fact that the present silica-gel derivative is considerably less expensive gives support to its potential interest as a sorbent of traces of toxic hard metal ions from water streams or even from physiological fluids, aided by extracorporeal devices containing the immobilized chelator.     

Direct electrochemistry of microperoxidase at Pt microelectrodes modified with carbon nanotubes

Direct electrochemistry of microperoxidase (MP-11) was found at Pt microelectrodes modified with multi-wall carbon nanotubes (MWNTs). The MWNTs used as the immobilization matrix cooperatively promote the bioactivity of MP-11. When MP-11 was immobilized on MWNTs film-modified Pt microelectrodes, a pair of well-defined redox waves was obtained. The resulted stable microelectrode could be used to catalyze the reduction of H2O2 and O2.     

Peptide-linked porphyrin sensitiser and colloidal Pt or Ir catalyst in the H2 formation reaction

Porphyrins linking amphiphilic peptides were applied as photosensitisers, assuming that they would interact with the H(+) reduction catalyst, polymer-protected colloidal Pt or Ir. The close orientation of the porphyrin and metal catalyst may facilitate efficient electron transfer. The porphyrin linking a peptide containing glutamic acids (Glu), Ac-Cys(porph)-Glu-Val-Glu-Val-NH(2) (2), was an effective sensitiser for the H(2) generation reaction in the presence of N-benzyldihydronicotinamide and colloidal Pt or Ir in aqueous media under visible light illumination. At pH 5 and 7, 2 was a more efficient photosensitiser than tetrakis(p-carboxyphenyl)porphyrin (TCPP). The efficiency of H(+) reduction catalysts was in the order Ir-pGlu (polyglutamic acid) > Ir-PVP (polyvinylpyrrolidone) > Pt-PVP. Dynamic light scattering and scanning electron microscopy measurements showed that large particles formed when colloidal metal solutions were produced by microwave irradiation. Fluorescence quenching experiments suggested that electron transfer occurred from the photoexcited porphyrin to the colloidal Ir.     

Effect of surfactants and inducers on increased uricase production under submerged fermentations by Bacillus cereus

Uricase is a clinical enzyme used for the oxidation of uric acid crystals in gout disease. The present study aimed to increase the suitable surfactant-mediated uricase production on induction by different concentrations of inducers. The efficiency of Bacillus cereus to produce extracellular uricase enzyme was studied in uric acid-containing agar plates. Among the studied inducers, uric acid is the potential inducer for uricase production under submerged fermentations (SMF), which induced 19.41?U/ml uricase in medium containing 2.0?g/L of uric acid, however further increase in the uric acid concentration decreased uricase production, which could be because of substrate inhibition. The physical parameters including agitation speed (rpm) and time duration (h) of uricase production were optimized and found to produce optimum uricase at 150?rpm in 26?h of SMF. Among the studied surfactants, nonionic surfactant, polyvinyl alcohol has shown a remarkable increase in the uricase production of 31.58?U/ml, which is a 61% increase under optimized conditions in SMF. The stability of produced uricase was found at pH 7.5 and temperature 30°C. Also the effects of various metal ions (1?mM) on the uricase activity were studied and observed to be inhibitory in nature in the descending order K⁺?>?Ca²⁺?>?Zn²⁺?>?Fe³⁺?>?Ni²⁺?>?Mg²⁺?>?Mn²⁺?>?Cu²⁺.     

Production of Methyl Ketones from Secondary Alcohols by Cell Suspensions of C2 to C4n-Alkane-Grown Bacteria

Nineteen new C₂ to C₄n-alkane-grown cultures were isolated from lake water from Warinanco Park, Linden, N.J., and from lake and soil samples from Bayway Refinery, Linden, N.J. Fifteen known liquid alkane-utilizing cultures were also found to be able to grow on C₂ to C₄n-alkanes. Cell suspensions of these C₂ to C₄n-alkane-grown bacteria oxidized 2-alcohols (2-propanol, 2-butanol, 2-pentanol, and 2-hexanol) to their corresponding methyl ketones. The product methyl ketones accumulated extracellularly. Cells grown on 1-propanol or 2-propanol oxidized both primary and secondary alcohols. In addition, the activity for production of methyl ketones from secondary alcohols was found in cells grown on either alkanes, alcohols, or alkylamines, indicating that the enzyme(s) responsible for this reaction is constitutive. The optimum conditions for in vivo methyl ketone formation from secondary alcohols were compared among selected strains: Brevibacterium sp. strain CRL56, Nocardia paraffinica ATCC 21198, and Pseudomonas fluorescens NRRL B-1244. The rates for the oxidation of secondary alcohols were linear for the first 3 h of incubation. Among secondary alcohols, 2-propanol and 2-butanol were oxidized at the highest rate. A pH around 8.0 to 9.0 was found to be the optimum for acetone or 2-butanone formation from 2-alcohols. The temperature optimum for the production of acetone or 2-butanone from 2-propanol or 2-butanol was rather high at 60°C, indicating that the enzyme involved in the reaction is relatively thermally stable. Metal-chelating agents inhibit the production of methyl ketones, suggesting the involvement of a metal(s) in the oxidation of secondary alcohols. Secondary alcohol dehydrogenase activity was found in the cell-free soluble fraction; this activity requires a cofactor, specifically NAD. Propane monooxygenase activity was also found in the cell-free soluble fraction. It is a nonspecific enzyme catalyzing both terminal and subterminal oxidation of n-alkanes.     

Alumina/silica supported K2CO3 as a catalyst for biodiesel synthesis from sunflower oil

The new type of catalyst for fatty acid methyl esters (FAME or biodiesel) synthesis with K₂CO₃ as active component on alumina/silica support was synthesized using sol–gel method. Corresponding catalyst (xerogel) was prepared by 12 h drying the wet gel in air at 300 °C, 600 °C or 1000 °C at atmospheric pressure. The catalysts activity in the methanolysis of sunflower oil was compared to the activity of the pure K₂CO₃. The effects of various reaction variables on the yield of FAME were investigated. It was found that the temperature of 120 °C and methanol to oil molar ratio of 15:1, are optimal conditions for FAME synthesis with synthesized catalyst. Repeated use of same amount of catalyst indicated that effect of potassium leaching obviously existed leading to decrease of catalyst activity.