Sequential strand exchange by XerC and XerD during site-specific recombination at dif

Successful segregation of circular chromosomes in Escherichia coli requires that dimeric replicons, produced by homologous recombination, are converted to monomers prior to cell division. The Xer site-specific recombination system uses two related tyrosine recombinases, XerC and XerD, to catalyze resolution of circular dimers at the chromosomal site, dif. A 33-base pair DNA fragment containing the 28-base pair minimal dif site is sufficient for the recombinases to mediate both inter- and intramolecular site-specific recombination in vivo. We show that Xer-mediated intermolecular recombination in vitro between nicked linear dif "suicide" substrates and supercoiled plasmid DNA containing dif is initiated by XerC. Furthermore, on the appropriate substrate, the nicked Holliday junction intermediate formed by XerC is converted to a linear product by a subsequent single XerD-mediated strand exchange. We also demonstrate that a XerC homologue from Pseudomonas aeruginosa stimulates strand cleavage by XerD on a nicked linear substrate and promotes initiation of strand exchange by XerD in an intermolecular reaction between linear and supercoiled DNA, thereby reversing the normal order of strand exchanges.     

Purification and characterization of the integrase from the Haemophilus influenzae bacteriophage HP1; identification of a four-stranded intermediate and the order of strand exchange

The integrase encoded by the temperate phage HP1 promotes the site-specific recombination between DNA sites on its genome (the attP site) and on the genome of the host Haemophilus influenzae (the attB site). The protein has been overproduced in Escherichia coli , and purified to apparent homogeneity. HP1 integrase promotes recombination of supercoiled attP -containing molecules with linear segments with attB sites. Reaction was enhanced by spermidine and by the bacterial DNA-bending protein integration host factor. The rate of recombination showed complex and related dependence upon the integrase concentration and the concentration of the supercoiled attP substrate. These relationships probably originate from the need to assemble a multi-protein complex on the attP DNA. The reaction promoted by HP1 integrase produced a four-stranded initial reaction product in which one pair of DNA strands had undergone transfer while the other pair remained intact. This four-stranded component was produced more rapidly than any product, and its steady-state level was proportional to the overall rate of reaction. This component had the kinetic and structural properties of an intermediate in the recombination reaction. The existence of this intermediate was used to determine that the two strand exchanges required for recombination of the duplex substrates proceed in a defined order.     

Xer site-specific recombination. DNA strand rejoining by recombinase XerC

Xer site-specific recombination functions in the stable maintenance of circular replicons in Escherichia coli. Each of two related recombinase proteins, XerC and XerD, cleaves a specific pair of DNA strands, exchanges them, and rejoins them to the partner DNA molecule during a complete recombination reaction. The rejoining activity of recombinase XerC has been analyzed using isolated covalent XerC-DNA complexes resulting from DNA cleavage reactions upon Holliday junction substrates. These covalent protein-DNA complexes are competent in the rejoining reaction, demonstrating that covalently bound XerC can catalyze strand rejoining in the absence of other proteins. This contrasts with a recombinase-mediated cleavage reaction, which requires the presence of both recombinases, the recombinase mediating catalysis at any given time requiring activation by the partner recombinase. In a recombining nucleoprotein complex, both cleavage and rejoining can occur prior to dissociation of the complex.     

Alterations in the directionality of lambda site-specific recombination catalyzed by mutant integrases in vivo.

Phage lambda integrative and excisive recombination normally proceeds by a pair of sequential strand exchanges. During the first exchange reaction, the "top" strand in each recombination site is cleaved, exchanged, and religated generating a Holliday junction intermediate. This intermediate DNA structure is resolved through a pair of reciprocal "bottom" strand exchanges, leading to recombinant products. The strict co-ordination of exchange reactions ensures religation between correct partner strands only. Here we show that the directionality of recombination is altered in vivo by two mutant integrases, Int-h (E174 K) and a double mutant Int-h/218 (E174 K/E218 K). This change in directionality leads to deletion instead of inversion on substrates that carry inverted attachment sites and, depending on the pair of target sites employed, requires the presence or absence of integration host factor. Neither Fis nor Xis is involved in deletion. Sequence analyses of deletion products reveal that the newly generated hybrid attachment site exhibits a reversed genetic polarity. We demonstrate that only one of two possible hybrid site configurations is generated and discuss two pathways leading to deletion. In the first, deletion results from a wrong alignment of the two recombination sites within the synaptic complex. In the second pathway, the unco-ordinated cleavage by the mutant integrases of all four DNA strands present in a conventional Holliday junction intermediate leads to two double-stranded breaks, whereby the subsequent rejoining between "wrong" partner strands appears restricted to only two strands.     

Reversed DNA strand cleavage specificity in initiation of Cre-LoxP recombination induced by the His289Ala active-site substitution

During the first steps of site-specific recombination, Cre protein cleaves and religates a specific homologous pair of LoxP strands to form a Holliday junction (HJ) intermediate. The HJ is resolved into recombination products through exchange of the second homologous strand pair. CreH289A, containing a His to Ala substitution in the conserved R-H-R catalytic motif, has a 150-fold reduced recombination rate and accumulates HJs. However, to produce these HJs, CreH289A exchanges the opposite set of strands compared to wild-type Cre (CreWT). To investigate how CreH289A and CreWT impose strand exchange order, we characterized their reactivities and strand cleavage preferences toward LoxP duplex and HJ substrates containing 8bp spacer substitutions. Remarkably, CreH289A had different and often opposite strand exchange preferences compared to CreWT with nearly all substrates. CreH289N was much less perturbed, implying that overall recombination rate and strand exchange depend more on His289 hydrogen bonding capability than on its acid/base properties. LoxP substitutions immediately 5' (S1 nucleotide) or 3' (S1' nucleotide) of the scissile phosphate had large effects on substrate utilization and strand exchange order. S1' substitutions, designed to alter base-unstacking events concomitant with Cre-induced LoxP bending, caused HJ accumulation and dramatically inverted the cleavage preferences. That pre-formed HJs were resolved via either strand in vitro suggests that inhibition of the "conformational switch" isomerization required to trigger the second strand exchange accounts for the observed HJ accumulation. Rather than reflecting CreWT behavior, CreH289A accumulates HJs of opposite polarity through a combination of its unique cleavage specificity and an HJ isomerization defect. The overall implication is that cleavage specificity is mediated by sequence-dependent DNA deformations that influence the scissile phosphate positioning and reactivity. A role of His289 may be to selectively stabilize the "activated" phosphate conformation in order to promote cleavage.     

Topological analysis of Hin-catalysed DNA recombination in vivo and in vitro

In vitro studies have demonstrated that Hin-catalysed site-specific DNA inversion occurs within a tripartite invertasome complex assembled at a branch on a supercoiled DNA molecule. Multiple DNA exchanges within a recombination complex (processive recombination) have been found to occur with particular substrates or reaction conditions. To investigate the mechanistic properties of the Hin recombination reaction in vivo, we have analysed the topology of recombination products generated by Hin catalysis in growing cells. Recombination between wild-type recombination sites in vivo is primarily limited to one exchange. However, processive recombination leading to knotted DNA products is efficient on substrates containing recombination sites with non-identical core nucleotides. Multiple exchanges are limited by a short DNA segment between the Fis-bound enhancer and closest recombination site and by the strength of Fis-Hin interactions, implying that the enhancer normally remains associated with the recombining complex throughout a single exchange reaction, but that release of the enhancer leads to multiple exchanges. This work confirms salient mechanistic aspects of the reaction in vivo and provides strong evidence for the propensity of plectonemically branched DNA in prokaryotic cells. We also demonstrated that a single DNA exchange resulting in inversion in vitro is accompanied by a loss of four negative supercoils.     

Geometry of site alignment during int family recombination: antiparallel synapsis by the Flp recombinase

The Flp site-specific recombinase functions in the copy number amplification of the yeast 2 microm plasmid. The recombination reaction is catalyzed by four monomers of Flp bound to two separate, but identical, recombination sites (FRT sites) and occurs in two sequential pairs of strand exchanges. The relative orientation of the two recombination sites during synapsis was examined. Topoisomerase relaxation and nick ligation were used to detect topological nodes introduced by the synapse prior to the chemical steps of recombination. A single negative supercoil was found to be trapped by Flp in substrates with inverted FRT sites whereas no trapped supercoils were observed with direct repeats. The topology of products resulting from Flp-mediated recombination adjacent to a well characterised synapse, that of Tn3 resolvase/res, was analyzed. The deletion and inversion reactions yielded the four noded catenane and the three noded knot, respectively, as the simplest and the most abundant products. The linking number change introduced by the Flp-mediated inversion reaction was determined to be +/-2. The most parsimonious explanation of these results is that Flp aligns its recombination sites with antiparallel geometry. The majority of synapses appear to occur without entrapment of additional random plectonemic DNA supercoils between the sites and no additional crossings are introduced as a result of the chemical steps of recombination.     

Dissecting the resolution reaction of lambda integrase using suicide Holliday junction substrates.

A reciprocal strand exchange between two DNA helices generates the crossed-strand intermediate, or Holliday junction, which is common to many pathways of homologous and site-specific recombination. The Int family of recombinases are unique in their ability to both make and resolve Holliday junctions. Previous experiments utilizing 'synthetic' att site Holliday junctions to study the mechanisms associated with the cleavage, transfer and ligation of DNA strands have been confined to studying reciprocal strand exchanges (a pair of temporally overlapping strand cleavages). To circumvent this limitation, we have designed synthetic suicide Holliday junctions that make it possible to monitor individual DNA strand cleavage events. These substrates contain a pre-existing nick in the vicinity of the Int binding site; when Int introduces a second nick into these substrates, the 5'OH nucleophile required for ligation (in either the forward or reverse reaction) is lost by diffusion, thus trapping the covalent protein-DNA intermediate. The results indicate that resolution (involving two partner Ints) is stimulated by additional 'cross-core' Ints as a result of enhanced cleavage rates, and not as a result of enhanced co-ordination of cleavage. Several models for the role of the 'cross-core' Ints during resolution are discussed, as well as the usefulness of these substrates for studying additional aspects of the Holliday junction resolution reaction.     

Attenuating functions of the C terminus of lambda integrase

The tyrosine family site-specific recombinases, in contrast to the related type I topoisomerases, which act as monomers on a single DNA molecule, rely on multi-protein complexes to synapse partner DNAs and coordinate two sequential strand exchanges involving four nicking-closing reactions. Here, we analyze three mutants of the catalytic domain of lambda integrase (Int), A241V, I353M and W350ter that are defective for normal recombination, but possess increased topoisomerase activity. The mutant enzymes can carry out individual DNA strand exchanges using truncated substrates or Holliday junctions, and they show more DNA-cleavage activity than wild-type Int on isolated att sites. Structural modeling predicts that the substituted residues may destabilize interactions between the C-terminal beta-strand (beta7) of Int and the core of the protein. The cleavage-competent state of Int requires the repositioning of the nucleophile (Y342) located on beta6 and the catalyst K235 located on the flexible beta2-beta3 loop, relative to their positions in a crystal structure of the inactive conformation. We propose that the anchoring of beta7 against the protein core restrains the movement of Tyr342 and/or Lys235, causing an attenuation of cleavage activity in most contexts. Within a bona fide recombination complex, the release of strand beta7 would allow Tyr342 and Lys235 to assume catalytically active conformations in coordination with other Int protomers in the complex. The loss of beta7 packing by misalignment or truncation in the mutant proteins described here causes a loss of regulated activity, thereby favoring DNA cleavage activity in monomeric complexes and forfeiting the coordination of strand-exchange necessary for efficient recombination.     

Specific DNA cleavage mediated by the integrase of conjugative transposon Tn916.

The conjugative transposon Tn916 encodes a protein called INT(Tn916) which, based on DNA sequence comparisons, is a member of the integrase family of site-specific recombinases. Integrase proteins such as INT(lambda), FLP, and XERC/D that promote site-specific recombination use characteristic, conserved amino acid residues to catalyze the cleavage and ligation of DNA substrates during recombination. The reaction proceeds by a two-step transesterification reaction requiring the formation of a covalent protein-DNA intermediate. Different requirements for homology between recombining DNA sites during integrase-mediated site-specific recombination and Tn916 transposition suggest that INT(Tn916) may use a reaction mechanism different from that used by other integrase recombinases. We show that purified INT(Tn916) mediates specific cleavage of duplex DNA substrates containing the Tn916 transposon ends and adjacent bacterial sequences. Staggered cleavages occur at both ends of the transposon, resulting in 5' hydroxyl protruding ends containing coupling sequences. These are sequences that are transferred with the transposon from donor to recipient during conjugative transposition. The nature of the cleavage products suggests that a covalent protein-DNA linkage occurs via a residue of INT(Tn916) and the 3'-phosphate group of the DNA. INT(Tn916) alone is capable of executing the strand cleavage step required for recombination during Tn916 transposition, and this reaction probably occurs by a mechanism similar to that of other integrase family site-specific recombinases.     

High efficiency of a sequential recombinase-mediated cassette exchange reaction in Escherichia coli

A comparison between the efficiency of recombinase-mediated cassette exchange (RMCE) reactions catalyzed in Escherichia coli by the site-specific recombinases Flp of yeast and Int of coliphage HK022 has revealed that an Flp-catalyzed RMCE reaction is more efficient than an Int-HK022 catalyzed reaction. In contrast, an RMCE reaction with 1 pair of frt sites and 1 pair of att sites catalyzed in the presence of both recombinases is very inefficient. However, the same reaction catalyzed by each recombinase individually supplied in a sequential order is very efficient, regardless of the order. Atomic force microscopy images of Flp with its DNA substrates show that only 1 pair of recombination sites forms a synaptic complex with the recombinase. The results suggest that the RMCE reaction is sequential.     

The isomeric preference of Holliday junctions influences resolution bias by lambda integrase.

Lambda site-specific recombination proceeds by a pair of sequential strand exchanges that first generate and then resolve a Holliday junction intermediate. A family of synthetic Holliday junctions with the branch point constrained to the center of the 7 bp overlap region was used to show that resolution of the top strands and resolution of the bottom strands are symmetrical but stereochemically distinct processes. Lambda integrase is sensitive to isomeric structure, preferentially resolving the pair of strands that are crossed in the protein-free Holliday junction. At the branch point of stacked immobile Holliday junctions, the number of purines is preferentially maximized in the crossed (versus continuous) strands if there is an inequality of purines between strands of opposite polarity. This stacking preference was used to anticipate the resolution bias of freely mobile junctions and thereby to reinforce the conclusions with monomobile junctions. The results provide a strong indication that in the complete recombination reaction a restacking of helices occurs between the top and bottom strand exchanges.     

Reversible dimer formation and stability of the anti-tumour single-chain Fv antibody MFE-23 by neutron scattering,analytical ultracentrifugation,and NMR and FT-IR spectroscopy

Cre recombinase uses two pairs of sequential cleavage and religation reactions to exchange homologous DNA strands between 34 base-pair (bp) LoxP recognition sequences. In the oligomeric recombination complex, a switch between "cleaving" and "non-cleaving" subunit conformations regulates the number, order, and regio-specificity of the strand exchanges. However, the particular sequence of events has been in question. From analysis of strand composition of the Holliday junction (HJ) intermediate, we determined that Cre initiates recombination of LoxP by cleaving the upper strand on the left arm. Cre preferred to react with the left arm of a LoxP suicide substrate, but at a similar rate to the right arm, indicating that the first strand to be exchanged is selected prior to cleavage. We propose that during complex assembly the cleaving subunit preferentially associates with the LoxP left arm, directing the first strand exchange to that side. In addition, this biased assembly would enforce productive orientation of LoxP sites in the recombination synapses. A novel Cre-HJ complex structure in which LoxP was oriented with the left arm bound by the cleaving Cre subunit suggested a physical basis for the strand exchange order. Lys86 and Lys201 interact with the left arm scissile adenine base differently than in structures that have a scissile guanine. These interactions are associated with positioning the 198-208 loop, a structural component of the conformational switch, in a configuration that is specific to the cleaving conformation. Our results suggest that strand exchange order and site alignment are regulated by an "induced fit" mechanism in which the cleaving conformation is selectively stabilized through protein-DNA interactions with the scissile base on the strand that is cleaved first.     

Determinants of product topology in a hybrid Cre-Tn3 resolvase site-specific recombination system

Many natural DNA site-specific recombination systems achieve directionality and/or selectivity by making recombinants with a specific DNA topology. This property requires that the DNA architecture of the synapse and the mechanism of strand exchange are both under strict control. Previously we reported that Tn3 resolvase-mediated synapsis of the accessory binding sites from the Tn3 recombination site res can impose topological selectivity on Cre/loxP recombination. Here, we show that the topology of these reactions is profoundly affected by subtle changes in the hybrid recombination site les. Reversing the orientation of loxP relative to the res accessory sequence, or adding 4 bp to the DNA between loxP and the accessory sequence, can switch between two-noded and four-noded catenane products. By analysing Holliday junction intermediates, we show that the innate bias in the order of strand exchanges at loxP is maintained despite the changes in topology. We conclude that a specific synaptic structure formed by resolvase and the res accessory sequences permits Cre to align the adjoining loxP sites in several distinct ways, and that resolvase-mediated intertwining of the accessory sequences may be less than has been assumed previously.     

Resolution of tethered antiparallel and parallel holliday junctions by the Flp site-specific recombinase

Members of the integrase family site-specific recombinases (also called the tyrosine family) bring about recombination in two steps by exchanging pairs of single strands at a time. The product of the first exchange reaction is a four-way DNA junction, the Holliday intermediate. The conformational dynamics by which the recombination complex "isomerizes" from the Holliday-forming to the Holliday-resolving mode are not well understood. Experiments with the lambda Int and Escherichia coli XerC/XerD systems imply that the strand configurations at the branch point of the protein-free junction dictate the resolution mode in the protein-bound junction. We have examined the question of strand bias during resolution for the Flp system by using a series of synthetic Holliday junctions that are conformationally constrained by local sequences or by strand tethering. We have not observed a strong resolution bias in favor of the strands designed to assume the "crossed" configuration within the unbound junction. The resolution patterns with antiparallel junctions in a variety of substrate contexts reveal either parity in strand choice, or only modest disparity. On the other hand, the highly biased resolutions observed in the case of tethered parallel junctions can be explained by the non-equivalence in protein occupancy of the DNA arms of these substrates and/or inefficient conversion of cleavage events to recombinants at the tethered ends.     

Accessory factors determine the order of strand exchange in Xer recombination at psi

Xer site-specific recombination in Escherichia coli converts plasmid multimers to monomers, thereby ensuring their correct segregation at cell division. Xer recombination at the psi site of plasmid pSC101 is preferentially intramolecular, giving products of a single topology. This intramolecular selectivity is imposed by accessory proteins, which bind at psi accessory sequences and activate Xer recombination at the psi core. Strand exchange proceeds sequentially within the psi core; XerC first exchanges top strands to produce Holliday junctions, then XerD exchanges bottom strands to give final products. In this study, recombination was analysed at sites in which the psi core was inverted with respect to the accessory sequences. A plasmid containing two inverted-core psi sites recombined with a reversed order of strand exchange, but with unchanged product topology. Thus the architecture of the synapse, formed by accessory proteins binding to accessory sequences, determines the order of strand exchange at psi. This finding has important implications for the way in which accessory proteins interact with the recombinases.     

Xer site-specific recombination in vitro.

Two related recombinases, XerC and XerD, belonging to the lambda integrase family of enzymes, are required for Xer site-specific recombination in vivo. In order to understand the roles of these proteins in the overall reaction mechanism, an in vitro recombination system using a synthetic Holliday junction-containing substrate has been developed. Recombination of this substrate is efficient and requires both XerC and XerD. However, only exchange of one pair of strands, the one corresponding to the conversion of the Holliday junction intermediate back to the substrate, has been observed. Recombination reactions using XerC and XerD derivatives that are mutant in their presumptive catalytic residues, or are maltose-binding fusion recombinase derivatives, have demonstrated that this pair of strand exchanges is catalysed by XerC. The site of XerC-mediated cleavage has been located to between the last nucleotide of the XerC binding site and the first nucleotide of the central region. Cleavage at this site generates a free 5'-OH and a covalent complex between XerC and the 3' end of the DNA.     

Construction and evaluation of a kinetic scheme for RecA-mediated DNA strand exchange

The Escherichia coli RecA protein is the prototype of a class of proteins playing a central role in genomic repair and recombination in all organisms. The unresolved mechanistic strategy by which RecA aligns a single strand of DNA with a duplex DNA and mediates a DNA strand switch is central to understanding its recombinational activities. Toward a molecular-level understanding of RecA-mediated DNA strand exchange, we explored its mechanism using oligonucleotide substrates and the intrinsic fluorescence of 6-methylisoxanthopterin (6MI). Steady- and presteady-state spectrofluorometric data demonstrate that the reaction proceeds via a sequential four-step mechanism comprising a rapid, bimolecular association step followed by three slower unimolecular steps. Previous authors have proposed multistep mechanisms involving two or three steps. Careful analysis of the differences among the experimental systems revealed a previously undiscovered intermediate (N1) whose formation may be crucial in the kinetic discrimination of homologous and heterologous sequences. This observation has important implications for probing the fastest events in DNA strand exchange using 6MI to further elucidate the molecular mechanisms of recombination and recombinational repair.     

Intermediates in Hin-mediated DNA inversion: a role for Fis and the recombinational enhancer in the strand exchange reaction.

The site-specific inversion reaction controlling flagellin synthesis in Salmonella involves the function of three proteins: Hin, Fis and HU. The DNA substrate must be supercoiled and contain a recombinational enhancer sequence in addition to the two recombination sites. Using mutant substrates or modified reaction conditions, large amounts of complexes can be generated which are recognized by double-stranded breaks within both recombination sites upon quenching. The cleaved molecules contain 2-bp staggered cuts within the central dinucleotide of the recombination site. Hin is covalently associated with the 5' end while the protruding 3' end contains a free hydoxyl. We demonstrate that complexes generated in the presence of an active enhancer are intermediates that have advanced past the major rate limiting step(s) of the reaction. In the absence of a functional enhancer, Hin is also able to assemble and catalyze site-specific cleavages within the two recombination sites. However, these complexes are kinetically distinct from the complexes assembled with a functional enhancer and cannot generate inversion without an active enhancer. The results suggest that strand exchange leading to inversion is mediated by double-stranded cleavage of DNA at both recombination sites followed by the rotation of strands to position the DNA into the recombinant configuration. The role of the enhancer and DNA supercoiling in these reactions is discussed.