Electrospun Poly(L-Lactide) Fiber with Ginsenoside Rg3 for Inhibiting Scar Hyperplasia of Skin

Hypertrophic scarring (HS) has been considered as a great concern for patients and a challenging problem for clinicians as it can be cosmetically disfiguring and functionally debilitating. In this study, Ginsenoside Rg3/Poly(l-lactide) (G-Rg3/PLLA) electrospun fibrous scaffolds covering on the full-thickness skin excisions location was designed to suppress the hypertrophic scar formation in vivo. SEM and XRD results indicated that the crystal G-Rg3 carried in PLLA electrospun fibers was in amorphous state, which facilitates the solubility of G-Rg3 in the PLLA electrospun fibrous scaffolds, and solubility of G-Rg3 in PBS is increased from 3.2 µg/ml for pure G-Rg3 powders to 19.4 µg/ml for incorporated in PLLA-10% fibers. The released G-Rg3 content in the physiological medium could be further altered from 324 to 3445 µg in a 40-day release period by adjusting the G-Rg3 incorporation amount in PLLA electrospun fibers. In vitro results demonstrated that electrospun G-Rg3/PLLA fibrous scaffold could significantly inhibit fibroblast cell growth and proliferation. In vivo results confirmed that the G-Rg3/PLLA electrospun fibrous scaffold showed significant improvements in terms of dermis layer thickness, fibroblast proliferation, collagen fibers and microvessels, revealing that the incorporation of the G-Rg3 in the fibers prevented the HS formation. The above results demonstrate the potential use of G-Rg3/PLLA electrospun fibrous scaffolds to rapidly minimize fibroblast growth and restore the structural and functional properties of wounded skin for patients with deep trauma, severe burn injury, and surgical incision.     

乳液法神经生长因子（NGF）电纺纤维的体外研究

目的：使用乳液法制备含有神经生长因子（NGF）的电纺纤维,研究其外观形貌和机械强度等物理性能,以及制备过程中NGF活性的变化,纤维中NGF的担载量和纤维体外释放动力学,评价其能否成为理想的神经修复材料,为进一步将NGF电纺纤维应用于周围神经修复奠定基础。方法：将NGF水溶液分散于PLLA溶液,通过W／O乳液法制备静电纺丝缓释纤维,对纤维的外观形貌等物理性能等进行表征,使用Elisa方法测定制备过程中NGF活性的保持以及体外释放动力学。结果：NGF电纺纤维具备类似细胞外基质（ECM）的良好外观形貌和一定的机械强度,其中NGF活性保持19．58％士6．05％,体外有效释放11天。结论：本文制备的乳液法NGF电纺纤维具备良好的物理性能,能够持续缓释有效剂量的NGF,适合作为神经修复材料进行进一步研究。     

Effect of adhesive on the morphology and mechanical properties of electrospun fibrous mat of cellulose acetate

Ultrafine fibers of cellulose acetate/poly(butyl acrylate) (CA/PBA) composite in which PBA acted as an adhesive and CA acted as a matrix, were successfully prepared as fibrous mat via electrospinning. The morphology observation from the electrospun CA/PBA composite fibers, after treatment with heat hardener, revealed that the fibers were cylindrical and had point-bonded structures. SEM, FT-IR spectra, Raman spectra, TGA analysis, and mechanical properties measurement were used to study the different properties of hybrid mats. The tensile strength of blend fibrous electrospun mats was found to be effectively increased. This resultant enhancement of the mechanical properties of polymer fibrous mats, caused by generating the point-bonded structures (due to adhesive), could increase the number of potential applications of mechanically weak electrospun CA fibers.     

Development of an Ibuprofen‐releasing biodegradable PLA/PGA electrospun scaffold for tissue regeneration

Our aim was to develop a biodegradable fibrous dressing to act as a tissue guide for in situ wound repair while releasing Ibuprofen to reduce inflammation in wounds and reduce pain for patients on dressing changes. Dissolving the acid form of Ibuprofen (from 1% to 10% by weight) in the same solvent as 75% polylactide, 25% polyglycolide (PLGA) polymers gave uniformly loaded electrospun fibers which gave rapid release of drug within the first 8 h and then slower release over several days. Scaffolds with 10% Ibuprofen degraded within 6 days. The Ibuprofen released from these scaffolds significantly reduced the response of fibroblasts to major pro‐inflammatory stimulators. Fibroblast attachment and proliferation on scaffolds was unaffected by the addition of 1–5% Ibuprofen. Scaffolds loaded with 10% Ibuprofen initially showed reduced cell attachment but this was restored by soaking scaffolds in media for 24 h. In summary, addition of Ibuprofen to electrospun biodegradable scaffolds can give acute protection of adjacent cells to inflammation while the scaffolds provide an open 3D fibrous network to which cells can attach and migrate. By 6 days, such scaffolds will have completely dissolved into the wound bed obviating any need for dressing removal. Biotechnol. Bioeng. 2010; 105: 396–408. © 2009 Wiley Periodicals, Inc.     

Electrospun Fibrous Scaffolds of Poly(glycerol-dodecanedioate) for Engineering Neural Tissues From Mouse Embryonic Stem Cells

For tissue engineering applications, the preparation of biodegradable and biocompatible scaffolds is the most desirable but challenging task.  Among the various fabrication methods, electrospinning is the most attractive one due to its simplicity and versatility. Additionally, electrospun nanofibers mimic the size of natural extracellular matrix ensuring additional support for cell survival and growth. This study showed the viability of the fabrication of long fibers spanning a larger deposit area for a novel biodegradable and biocompatible polymer named poly(glycerol-dodecanoate) (PGD)¹ by using a newly designed collector for electrospinning. PGD exhibits unique elastic properties with similar mechanical properties to nerve tissues, thus it is suitable for neural tissue engineering applications. The synthesis and fabrication set-up for making fibrous scaffolding materials was simple, highly reproducible, and inexpensive. In biocompatibility testing, cells derived from mouse embryonic stem cells could adhere to and grow on the electrospun PGD fibers. In summary, this protocol provided a versatile fabrication method for making PGD electrospun fibers to support the growth of mouse embryonic stem cell derived neural lineage cells.     

金鱼再生的视神经在顶盖投射精确化的DiI顺行标记研究

本文用微量显微注射法,在金鱼视网膜的背侧用亲脂类荧光染料DiI标记少量神经节细胞,通过顺行标记研究了视神经再生过程中视网膜顶盖投射的精确化过程。在损伤视神经后的不同时期观察了再生视神经纤维在顶盖整装片上的分布。在再生早期它们以超出正常的途径由背腹两侧进入顶盖,广泛分布。但其中大部分仍分布于顶盖腹侧的靶区。在再生晚期通过精确化,重建如正常鱼一样精确的视网膜顶盖投射。这个精确化过程表现在以下三方面:(1)再生于顶盖错误区域的再生视神经纤维的消失;(2)再生早期视神经纤维主干上生长的侧部分支的消失;(3)到达靶区的再生视神经纤维形成重迭的终末分支。由以上结果推测,顶盖中可能存在两类不同的因子:一类是普通诱向因子,存在于整个顶盖中,它在再生早期引导再生的视神经纤维长入顶盖。另一类是神经营养因子,它具区域特异性,在再生晚期引导视神经纤维到达顶盖靶区,形成精确的视网膜顶盖投射。     

Functionalizing electrospun fibers with biologically relevant macromolecules

The development of functionalized polymers that can elicit specific biological responses is of great interest in the biomedical community, as well as the development of methods to fabricate these biologically functionalized polymers. For example, the generation of fibrous matrices with biological properties and fiber diameters commensurate with those of the natural extracellular matrix (ECM) may permit the development of novel materials for use in wound healing or tissue engineering. The goal of this work is, therefore, to create a biologically active functionalized electrospun matrix to permit immobilization and long-term delivery of growth factors. In this work, poly(ethylene glycol) functionalized with low molecular weight heparin (PEG-LMWH) was fabricated into fibers for possible use in drug delivery, tissue engineering, or wound repair applications. Electrospinning was chosen to process the LMWH into fiber form due to the small fiber diameters and high degree of porosity that can be obtained relatively quickly and using small amounts of starting material. Both free LMWH and PEG-LMWH were investigated for their ability to be incorporated into electrospun fibers. Each of the samples were mixed with a carrier polymer consisting of either a 10 wt % poly(ethylene oxide) (PEO) or 45 wt % poly(lactide-co-glycolide) (PLGA). Field emission scanning electron microscopy (FESEM), energy-dispersive X-ray analysis (EDX), UV-vis spectroscopy, and multiphoton microscopy were used to characterize the electrospun matrices. The incorporation of heparin into the electrospun PEO and PLGA fibers did not affect the surface morphology or fiber diameters. The fibers produced had diameters ranging from approximately 100 to 400 nm. Toluidine blue assays of heparin suggest that it can be incorporated into an electrospun matrix at concentrations ranging from 3.5 to 85 mug per milligram of electrospun fibers. Multiphoton microscopy confirmed that incorporation of PEG-LMWH into the matrix permits retention of the heparin for at least 14 days. Improvements in the binding of basic fibroblast growth factor to the electrospun fibers were also observed for fibers functionalized with PEG-LMWH over those functionalized with LMWH alone. The combination of these results suggests the utility for producing electrospun fibers that are appropriately functionalized for use in biomaterials applications.     

Physical and biological performance of a novel block copolymer nerve guide

Although the ability to regenerate is evident in the nervous system, lesioned neurites are unable to cross gaps in neuronal pathways. In order to bridge gaps, guiding cues are essential to direct neurite regrowth. To overcome many of the shortcomings of polymer-based nerve guides, we developed a bioresorbable nerve guide composed of a novel trimethylene carbonate-caprolacton block copolymer (TMC-CL). Pore formation was controlled by using special solvent/precipitation media compositions in combination with the pore forming agent poly ethylene glycol (PEG). NMR spectroscopy, shear force-, compression-, and permeation assays were used for conduit characterization. The polymer conduit has a semipermeable wall with submicron pores to allow free metabolite/drug exchange. In order to investigate the principle of temporally controlled expression of therapeutic proteins in nerve guides, Neuro-2a cells were genetically engineered to express the reporter gene product green fluorescent protein (GFP) under the control of the Tet-On system. When these transduced cells were encapsulated in nerve guides, GFP expression could be induced for days by adding the antibiotic tetracycline derivative doxycycline to the nerve guide environment. Furthermore, encapsulated dorsal root ganglia (DRG) produced long neurites in vitro. In subsequent in vivo experiments, nerve guides filled with Schwann cells (SC) were implanted into lesioned spinal cords of adult rats. Regeneration of spinal cord axons into nerve guides was promoted by co-implanted Schwann cells. The data suggest that the novel TMC-CL nerve guides provide a promising tool for neuroregeneration.     

担载神经生长因子(NGF)的乳液法涂层纤维体外缓释研究

目的:目前周围神经修复中,神经导管是研究热点,本文研究乳液法涂层纤维制备的神经导管在神经修复中应用的可能性。方法:本文采用乳液法制备担载NGF的丝素-聚乳酸(PLLA)涂层电纺纤维,观察纤维的形态,测定NGF的体外释放动力学参数,并考察纤维释放液对于PC12细胞增殖的影响。结果:担载NGF的涂层纤维具备类似于细胞外基质(ECM)的三维结构和多孔形态;涂层纤维中NGF体外有效缓释10天;细胞实验中,在含有释放液的培养基中生长的PC12细胞,与空白对照组相比,荧光强度平均多了2000-4000个荧光强度,所以释放液可以更好地促进PC12细胞的增殖。结论:担载NGF的乳液法涂层纺丝纤维具备促进缺损周围神经修复的条件,可以进一步研究在动物体内修复缺损周围神经中的效果,为以后的临床应用打下基础。     

NGF电纺纤维的体外缓释研究

目的:研究担载神经生长因子(NGF)的静电纺丝纤维的表征,考察NGF电纺纤维对于周围神经修复的效果。方法:将NGF水溶液分散于PLLA溶液,通过W/O乳液法制备静电纺丝纤维,对纤维的形态、力学性能等进行表征,Elisa方法测定NGF的体外释放动力学,Alamer Blue法检测试剂来考察纤维释放液对于PC12细胞增殖的影响。结果:NGF电纺纤维具备良好的形态和力学性质,直径为500-900 nm,纤维具备三维多孔结构。纤维的最大拉伸应力为2.50±0.41 MPa。电纺纤维中NGF在体外可有效释放9天,累积释放量接近3000 pg。细胞活性实验结果显示,第1、3、5、7天释放液的荧光强度与对照组相比有显著差异。结论:担载NGF的乳液法静电纺丝纤维有促进缺损周围神经修复的潜质。     

Electrospinning Growth Factor Releasing Microspheres into Fibrous Scaffolds

This procedure describes a method to fabricate a multifaceted substrate to direct nerve cell growth. This system incorporates mechanical, topographical, adhesive and chemical signals. Mechanical properties are controlled by the type of material used to fabricate the electrospun fibers. In this protocol we use 30% methacrylated Hyaluronic Acid (HA), which has a tensile modulus of ~500 Pa, to produce a soft fibrous scaffold. Electrospinning on to a rotating mandrel produces aligned fibers to create a topographical cue. Adhesion is achieved by coating the scaffold with fibronectin. The primary challenge addressed herein is providing a chemical signal throughout the depth of the scaffold for extended periods. This procedure describes fabricating poly(lactic-co-glycolic acid) (PLGA) microspheres that contain Nerve Growth Factor (NGF) and directly impregnating the scaffold with these microspheres during the electrospinning process. Due to the harsh production environment, including high sheer forces and electrical charges, protein viability is measured after production. The system provides protein release for over 60 days and has been shown to promote primary nerve cell growth.     

Development of a bioreactor for evaluating novel nerve conduits

We describe an experimental closed bioreactor device for studying novel tissue engineered peripheral nerve conduits in vitro. The system integrates a closed loop system consisting of one, two, or three experimental nerve conduits connected in series or parallel, with the ability to study novel scaffolds within guidance conduits. The system was established using aligned synthetic microfiber scaffolds of viscose rayon and electrospun polystyrene. Schwann cells were seeded directly into conduits varying from 10 to 80 mm in length and allowed to adhere under 0 flow for 1 h, before being cultured for 4 days under static or continuous flow conditions. In situ viability measurements showed the distribution of live Schwann cells within each conduit and enabled quantification thereafter. Under static culture viable cells only existed in short conduit scaffolds (10 mm) or at the ends of longer conduits (20-80 mm) with a variation in viable cell distribution. Surface modification of scaffold fibers with type-1 collagen or acrylic acid increased cell number by 17% and 30%, respectively. However, a continuous medium flow of 0.8 mL/h was found to increase total cell number by 2.5-fold verses static culture. Importantly, under these conditions parallel viability measurements revealed a ninefold increase compared to static culture. Fluorescence microscopy of scaffolds showed cellular adhesion and alignment on the longitudinal axis. We suggest that such a system will enable a rigorous and controlled approach for evaluating novel conduits for peripheral nerve repair, in particular using hydrolysable materials for the parallel organization of nerve support cells, prior to in vivo study.     

Electrospun zwitterionic poly(sulfobetaine methacrylate) for nonadherent, superabsorbent, and antimicrobial wound dressing applications

Zwitterionic poly(sulfobetaine methacrylate) (PSBMA) has been well studied for its superhydrophilic and ultralow biofouling properties, making it a promising material for superabsorbent and nonadherent wound dressings. Electrospinning provides multiple desirable features for wound dressings, including high absorptivity due to high surface-area-to-volume ratio, high gas permeation, and conformability to contour of the wound bed. The goal of this work is to develop a fibrous membrane of PSBMA via electrospinning and evaluate its properties related to wound dressing applications. Being superhydrophilic, PSBMA fibers fabricated by a conventional electrospinning method would readily dissolve in water, whereas if cross-linker is added, the formation of hydrogel would prevent electrospinning. A three-step polymerization-electrospinning-photo-cross-linking process was developed in this work to fabricate the cross-linked electrospun PSBMA fibrous membrane. Such electrospun membrane was stable in water and exhibited high water absorption of 353% (w/w), whereas the PSBMA hydrogel only absorbed 81% water. The electrospun membrane showed strong resistance to protein adsorption and cell attachment. Bacterial adhesion studies using Gram negative P. aeruginosa and Gram positive S. epidermidis showed that the PSBMA electrospun membrane was also highly resistant to bacterial adhesion. The Ag(+)-impregnated electrospun PSBMA membrane was shown microbicidal, against both S. epidermidis and P. aeruginosa. Such electrospun PSBMA membrane is ideal for a novel type of nonadherent, superabsorbent, and antimicrobial wound dressing. The superior water absorption aids in fluid removal from highly exudating wounds while keeping the wound hydrated to support healing. Because of the resistance to protein, cell, and bacterial adhesion, the dressing removal will neither cause patients' pain nor disturb the newly formed tissues. The dressing also prevents the attachment of environmental bacteria and offers broad-spectrum antimicrobial activity. It is the first work to develop the water-stable electrospun PSBMA membrane, which has great potential for wound dressing and other applications.     

Optical, bactericidal and water repellent properties of electrospun nano-composite membranes of cellulose acetate and ZnO

In this report, ZnO nanoparticles embedded cellulose acetate (CA) fibrous membrane with multifunctional properties have been prepared through electrospinning method. The morphology of the electrospun composite membrane was analyzed by Scanning Electron Microscope (SEM). It was found that the polymer concentration in the solution has a significant effect on the morphology of the fibers. The optical property of the sample was tested using Photo Luminescence (PL) spectra. There is no significant change in the emission features of cellulose acetate with the addition of ZnO. The anti-bacterial property of the sample was studied using disc diffusion method. The wettability of the pure and composite fibrous membrane was also studied by measuring the contact angle of water on the membrane. It was observed that the embedded ZnO in the CA was responsible for the hydrophobic nature of the surface.     

Dynamic changes of mechanically activated channels and K+ channels at injury site of peripheral nerve in rat

Ectopic ion channels developed locally at the injury site after nerve damage by light ligation around common sciatic nerve of the rats. Different channel types have different processes of formation, accumulation and degeneration. During the first three days after injury, mechanically activated channels that are modulated by Ca++ channel activities first appeared. As the nerve fibers begin to be excited by TEA, a blocker of K+ channels, suggesting that the accumulation of K+ channels, the responsibility of mechanically activated channels was declining. Onset of K+ channels was from the 3rd postoperative day and lasted up to the fiftieth day. This time course of K+ channel development was closely related to allodynia and hyperalgesia of neuropathic animal behaviour. The results suggest that chronic contraction injury induces a dynamic change in the ectopic mechanically activated channels and K+ channels at the injury site of nerve and there is an interchange in the development time courses of the mechanic     

Sustained release of proteins from electrospun biodegradable fibers

Electrospinning is a simple and versatile technique of producing polymeric fibers ranging from submicron to micron in diameter. Incorporation of bioactive agents into the fibers could make a biofunctional tissue engineering scaffold. In this study, we investigated the feasibility of encapsulating human beta-nerve growth factor (NGF), which was stabilized in a carrier protein, bovine serum albumin (BSA) in a copolymer of epsilon-caprolactone and ethyl ethylene phosphate (PCLEEP) by electrospinning. Partially aligned protein encapsulated fibers were obtained and the protein was found to be randomly dispersed throughout the electrospun fibrous mesh in aggregate form. A sustained release of NGF via diffusion process was obtained for at least 3 months. PC12 neurite outgrowth assay confirmed that the bioactivity of electrospun NGF was retained, at least partially, throughout the period of sustained release, thus clearly demonstrating the feasibility of encapsulating proteins via electrospinning to produce biofunctional tissue scaffolds.     

Complementary Effects of Two Growth Factors in Multifunctionalized Silk Nanofibers for Nerve Reconstruction

With the aim of forming bioactive guides for peripheral nerve regeneration, silk fibroin was electrospun to obtain aligned nanofibers. These fibers were functionalized by incorporating Nerve Growth Factor (NGF) and Ciliary NeuroTrophic Factor (CNTF) during electrospinning. PC12 cells grown on the fibers confirmed the bioavailability and bioactivity of the NGF, which was not significantly released from the fibers. Primary neurons from rat dorsal root ganglia (DRGs) were grown on the nanofibers and anchored to the fibers and grew in a directional fashion based on the fiber orientation, and as confirmed by growth cone morphology. These biofunctionalized nanofibers led to a 3-fold increase in neurite length at their contact, which was likely due to the NGF. Glial cell growth, alignment and migration were stimulated by the CNTF in the functionalized nanofibers. Organotypic culture of rat fetal DRGs confirmed the complementary effect of both growth factors in multifunctionalized nanofibers, which allowed glial cell migration, alignment and parallel axonal growth in structures resembling the ‘bands of Bungner’ found in situ. Graftable multi-channel conduits based on biofunctionalized aligned silk nanofibers were developed as an organized 3D scaffold. Our bioactive silk tubes thus represent new options for a biological and biocompatible nerve guidance conduit.     

Preparation and Evaluation of Electrospun Zein/HA Fibers Based on Two Methods of Adding HA Nanoparticles

Zein/HA fibrous membranes were successfully prepared by electrospinning the zein/HA solution mixed by magnetic stirrer （Method I） or ultrasonic power （Method Ⅱ）. The morphology of zeirdHA nanocomposite fibers and the distribution of HA within the fibers electrospun by two methods were researched by Scanning Electron Microscopy （SEM） and Energy-dispersive X-ray spectroscopy （EDX）. In Method I, the distribution of HA nanoparticles is not homogeneous and HA particles tend to agglom- erate. The relatively homogeneous HA distribution can be observed in the membranes electrospun by Method Ⅱ. Using mag- netic stirrer to prepare the electrospinning solution improves the wettability of zein/HA membranes. From the viewpoint of application, electrospun zein/HA membranes fabricated by the solution mixed via Methods I and II both possessed reasonable tensile strength and elongation at break for both handling and sterilization. Considering two aspects of strength and elongation, electrospun zein/HA membranes fabricated by Method I are more balanced than those fabricated by Method Ⅱ. Biological performances of the control zein and zein/HA membranes were assessed by in vitro culture of hMSCs. Results show that both types of the membranes can support cell proliferation. The cells cultured on the zein/HA membranes electrospun by Method I with 5 wt% HA （on weight ofzein） show significantly higher proliferation than those cultured on the control zein membranes on the seventh day. The electrospun zein/HA fibrous membranes show promises for bone tissue engineering applications.     

Significantly reinforced composite fibers electrospun from silk fibroin/carbon nanotube aqueous solutions

Microcomposite fibers of regenerated silk fibroin (RSF) and multiwalled carbon nanotubes (MWNTs) were successfully prepared by an electrospinning process from aqueous solutions. A quiescent blended solution and a three-dimensional Raman image of the composite fibers showed that functionalized MWNTs (F-MWNTs) were well dispersed in the solutions and the RSF fibers, respectively. Raman spectra and wide-angle X-ray diffraction (WAXD) patterns of RSF/F-MWNT electrospun fibers indicated that the composite fibers had higher β-sheet content and crystallinity than the pure RSF electrospun fibers, respectively. The mechanical properties of the RSF electrospun fibers were improved drastically by incorporating F-MWNTs. Compared with the pure RSF electrospun fibers, the composite fibers with 1.0 wt % F-MWNTs exhibited a 2.8-fold increase in breaking strength, a 4.4-fold increase in Young's modulus, and a 2.1-fold increase in breaking energy. Cytotoxicity test preliminarily demonstrated that the electrospun fiber mats have good biocompatibility for tissue engineering scaffolds.     

Protrusive waves guide 3D cell migration along nanofibers

In vivo, cells migrate on complex three-dimensional (3D) fibrous matrices, which has made investigation of the key molecular and physical mechanisms that drive cell migration difficult. Using reductionist approaches based on 3D electrospun fibers, we report for various cell types that single-cell migration along fibronectin-coated nanofibers is associated with lateral actin-based waves. These cyclical waves have a fin-like shape and propagate up to several hundred micrometers from the cell body, extending the leading edge and promoting highly persistent directional movement. Cells generate these waves through balanced activation of the Rac1/N-WASP/Arp2/3 and Rho/formins pathways. The waves originate from one major adhesion site at leading end of the cell body, which is linked through actomyosin contractility to another site at the back of the cell, allowing force generation, matrix deformation and cell translocation. By combining experimental and modeling data, we demonstrate that cell migration in a fibrous environment requires the formation and propagation of dynamic, actin based fin-like protrusions.