Noise and functional protein dynamics

The magnetic field dependence of the proton-spin-lattice relaxation rate in rotationally immobilized proteins shows that the one-dimensional character of the protein primary structure causes a dramatic increase in the population of low-frequency motions from 10 kHz to 20 MHz. As a consequence, the probability and rate at which functionally critical conformational states are thermally sampled in a protein are dramatically increased as well, when compared with a three-dimensional lattice structure. Studies of protein dynamics often focus on time periods far shorter than those associated with catalytic function, but we show here that the magnetic field dependence of the proton nuclear spin-lattice relaxation rate in rotationally immobilized proteins reports unambiguously the structural fluctuations in the frequency range from 10 kHz to 20 MHz. This relaxation rate decreases with increasing Larmor frequency according to a power law that derives from the distribution of dynamical states, the localization of the structural disturbances, and the spatial distribution of hydrogen atoms in the structure. The robust theoretical foundation for the spin-relaxation process, loosely characterized as a direct spin-phonon coupling, shows that the disturbances propagate in a space of reduced dimensionality, essentially along the stiff connections of the polypeptide chain. The reduced dimensionality traps the disturbance and changes the efficiency for energy redistribution in the protein and the processes that drive nuclear spin relaxation. We also show that the Larmor frequency dependence of the protein-proton-spin-lattice relaxation rate constant is related to the frequency dependence of force constants and mean-square displacement commonly observed or calculated for proteins. We believe that these approaches give additional physical insight into the character of the extremely low-frequency protein dynamics.     

Peptidyl linkers for protein heterodimerization catalyzed by microbial transglutaminase

Specific peptidyl linkers that result in the heterodimerization of functional proteins, which is catalyzed by microbial transglutaminase from Streptomyces mobaraensis (MTG), were generated based on a ribonuclease S-peptide using site-directed mutagenesis. The peptidyl linkers designated as Lys-tag and Gln-tag were designed to possess sole reactive Lys or Gln residue that was amenable for selective Lys-Gln cross-linkage of different proteins. Green fluorescent protein variants, ECFP and EYFP, were employed as model proteins, and those Lys- and Gln-tags were fused to the N-termini of ECFP and EYFP, respectively. As a result, we succeeded in solely obtaining the ECFP-EYFP heterodimer without forming multiply cross-linked byproducts. It was found that the reactivity of peptidyl linkers varied according to the type of amino acid to be replaced. Peptidyl linkers with a basic amino acid (Arg) exhibited the highest reactivity in the cross-linking reaction, suggesting the cationic residue substrate preference of MTG. Kinetic analysis utilizing fluorescent resonance energy transfer (FRET), that is only observed upon the heterodimeric ECFP-EYFP conjugation, revealed that the amino acid replacement contributed to the acceleration of cross-linking reactions by increasing catalytic turnover (k(cat)), rather than substrate binding affinity (K(m)). Finally, using a ribonuclease S-protein, the manipulation of enzymatic protein cross-linking based on specific S-peptide:S-protein interactions was explored. Since newly designed Lys- and Gln-tags retained binding affinities to the S-protein, the heterodimerization was perfectly restrained by wrapping them with the S-protein. The results suggest the possibility of limited protein conjugation by tuning steric hindrance against the MTG. Tailoring enzymatic posttranslational modifications with either engineering peptidyl substrates or by taking specific peptide-protein interactions into consideration may facilitate the development of a new sequential protein conjugation method for the preparation of multifunctional protein.     

Control of function of a small peptide by a protein

A peptide that functions only in the presence of a protein has been developed using reaction-based selection from peptide phage libraries. The peptide was not functional in the absence of the protein, but formed enaminones with 1,3-diketone derivatives when bound to the protein.     

Novel peptide linkers for highly potent antibody-auristatin conjugate

Auristatins are highly potent antimitotic agents that have received considerable attention because of their activities when targeted to tumor cells in the form of antibody-drug conjugates (ADCs). Our lead agent, SGN-35, consists of the cAC10 antibody linked to the N-terminal amino acid of monomethylauristatin E (MMAE) via a valine-citrulline p-aminobenzylcarbamate (val-cit-PABC) linker that is cleaved by intracellular proteases such as cathepsin B. More recently, we developed an auristatin F (AF) derivative monomethylauristatin F (MMAF), which unlike MMAE contains the amino acid phenylalanine at the C-terminal position. Because of the negatively charged C-terminal residue, the potency of AF and MMAF is impaired. However, their ability to kill target cells is greatly enhanced through facilitated cellular uptake by internalizing mAbs. Here, we explore the effects of linker technology on AF-based ADC potency, activity, and tolerability by generating a diverse set of dipeptide linkers between the C-terminal residue and the mAb carrier. The resulting ADCs differed widely in activity, with some having significantly improved therapeutic indices compared to the original mAb-Val-Cit-PABC-MMAF conjugate. The therapeutic index was increased yet further by generating dipeptide-based ADCs utilizing new auristatins with methionine or tryptophan as the C-terminal drug residue. These results demonstrate that manipulation of the C-terminal peptide sequence used to attach auristatins to the mAb carrier can lead to highly potent and specific conjugates with greatly improved therapeutic windows.     

Large-scale functional analysis using peptide or protein arrays

The array format for analyzing peptide and protein function offers an attractive experimental alternative to traditional library screens. Powerful new approaches have recently been described, ranging from synthetic peptide arrays to whole proteins expressed in living cells. Comprehensive sets of purified peptides and proteins permit high-throughput screening for discrete biochemical properties, whereas formats involving living cells facilitate large-scale genetic screening for novel biological activities. In the past year, three major genome-scale studies using yeast as a model organism have investigated different aspects of protein function, including biochemical activities, gene disruption phenotypes, and protein-protein interactions. Such studies show that protein arrays can be used to examine in parallel the functions of thousands of proteins previously known only by their DNA sequence.     

Control of electron transfer by protein dynamics in photosynthetic reaction centers

Abstract

Trehalose and glycerol are low molecular mass sugars/polyols that have found widespread use in the protection of native protein states, in both short- and long-term storage of biological materials, and as a means of understanding protein dynamics. These myriad uses are often attributed to their ability to form an amorphous glassy matrix. In glycerol, the glass is formed only at cryogenic temperatures, while in trehalose, the glass is formed at room temperature, but only upon dehydration of the sample. While much work has been carried out to elucidate a mechanistic view of how each of these matrices interact with proteins to provide stability, rarely have the effects of these two independent systems been directly compared to each other. This review aims to compile decades of research on how different glassy matrices affect two types of photosynthetic proteins: (i) the Type II bacterial reaction center from Rhodobacter sphaeroides and (ii) the Type I Photosystem I reaction center from cyanobacteria. By comparing aggregate data on electron transfer, protein structure, and protein dynamics, it appears that the effects of these two distinct matrices are remarkably similar. Both seem to cause a “tightening” of the solvation shell when in a glassy state, resulting in severely restricted conformational mobility of the protein and associated water molecules. Thus, trehalose appears to be able to mimic, at room temperature, nearly all of the effects on protein dynamics observed in low temperature glycerol glasses.     

Collective dynamics differentiates functional divergence in protein evolution

Protein evolution is most commonly studied by analyzing related protein sequences and generating ancestral sequences through Bayesian and Maximum Likelihood methods, and/or by resurrecting ancestral proteins in the lab and performing ligand binding studies to determine function. Structural and dynamic evolution have largely been left out of molecular evolution studies. Here we incorporate both structure and dynamics to elucidate the molecular principles behind the divergence in the evolutionary path of the steroid receptor proteins. We determine the likely structure of three evolutionarily diverged ancestral steroid receptor proteins using the Zipping and Assembly Method with FRODA (ZAMF). Our predictions are within ∼2.7 Å all-atom RMSD of the respective crystal structures of the ancestral steroid receptors. Beyond static structure prediction, a particular feature of ZAMF is that it generates protein dynamics information. We investigate the differences in conformational dynamics of diverged proteins by obtaining the most collective motion through essential dynamics. Strikingly, our analysis shows that evolutionarily diverged proteins of the same family do not share the same dynamic subspace, while those sharing the same function are simultaneously clustered together and distant from those, that have functionally diverged. Dynamic analysis also enables those mutations that most affect dynamics to be identified. It correctly predicts all mutations (functional and permissive) necessary to evolve new function and ∼60% of permissive mutations necessary to recover ancestral function.     

Structural dynamics and functional domains of the fur protein

Proteolytic enzymes were used to detect metal-induced conformational changes in the ferric uptake regulation (Fur) protein of Escherichia coli K12. Metal binding results in enhanced cleavage of the N-terminal region of Fur by trypsin and chymotrypsin. Activation of both trypsinolysis sensitivity and DNA binding have similar metal ion specificity and concentration dependencies, suggesting that the conformational change detected is required for operator DNA binding. Isolation and characterization of biochemically generated fragments of Fur as well as other data indicate that the N-terminal region is necessary for the interaction of the repressor with DNA and that a C-terminal domain is sufficient for binding to metal ions.     

Role of linkers in communication between protein modules

Multidomain proteins are common in a variety of cellular processes. Their domains are interconnected through short stretches of amino acid residues referred to as linkers. Recent studies on many systems have provided compelling evidence that linkers are more than simple covalent connectors. They also perform the important task of establishing communication between the different functional modules that exist within such proteins.     

Molecular dynamics study of a calmodulin-like protein with an IQ peptide: spontaneous refolding of the protein around the peptide

The Calmodulin (CaM) is a small (16.7 kDa), highly acidic protein that is crucial to all eukaryotes by serving as a prototypical calcium sensor. In the present study, we investigated, through molecular dynamics simulations, the dynamics of a complex between the Mlc1p protein, which is a CaM-like protein, and the IQ4 peptide. This protein-peptide interaction is of high importance because IQ motifs are widely distributed among different kinds of CaM-binding proteins. The Mlc1p-IQ4 complex, which had been resolved by crystallography to 2.1 A, confers to a Ca(+2)-independent stable structure. During the simulations, the complex undergoes a complicated modulation process, which involves bending of the angles between the alpha-helices of the protein, breaking of the alpha-helical structure of the IQ4 peptide into two sections, and formation of new contact points between the protein and the peptide. The dynamics of the process consist of fast sub picosecond events and much slower ones that take a few nanoseconds to completion. Our study expands the information embedded in the crystal structure of the Mlc1p-IQ4 complex by describing its dynamic behavior as it evolves from the crystal structure to a form stable in solution. The article shows that careful application of molecular dynamics simulations can be used for extending the structural information presented by the crystal structure, thereby revealing the dynamic configuration of the protein in its physiological environment.     

Fast dynamics perturbation analysis for prediction of protein functional sites

Background  

We present a fast version of the dynamics perturbation analysis (DPA) algorithm to predict functional sites in protein structures. The original DPA algorithm finds regions in proteins where interactions cause a large change in the protein conformational distribution, as measured using the relative entropy D _x . Such regions are associated with functional sites.     

Length requirements for membrane fusion of influenza virus hemagglutinin peptide linkers to transmembrane or fusion peptide domains

During membrane fusion, the influenza A virus hemagglutinin (HA) adopts an extended helical structure that contains the viral transmembrane and fusion peptide domains at the same end of the molecule. The peptide segments that link the end of this rod-like structure to the membrane-associating domains are approximately 10 amino acids in each case, and their structure at the pH of fusion is currently unknown. Here, we examine mutant HAs and influenza viruses containing such HAs to determine whether these peptide linkers are subject to specific length requirements for the proper folding of native HA and for membrane fusion function. Using pairwise deletions and insertions, we show that the region flanking the fusion peptide appears to be important for the folding of the native HA structure but that mutant proteins with small insertions can be expressed on the cell surface and are functional for membrane fusion. HA mutants with deletions of up to 10 residues and insertions of as many as 12 amino acids were generated for the peptide linker to the viral transmembrane domain, and all folded properly and were expressed on the cell surface. For these mutants, it was possible to designate length restrictions for efficient membrane fusion, as functional activity was observed only for mutants containing linkers with insertions or deletions of eight residues or less. The linker peptide mutants are discussed with respect to requirements for the folding of native HAs and length restrictions for membrane fusion activity.     

New trends in cryoenzymology: probing the functional role of protein dynamics by single-step kinetics

Cryoenzymology was initially used to slow down enzyme-catalyzed reactions so as to stabilize intermediates for further study. During the course of this early work, it became clear that cryoenzymology could be extended to other ends and some of these are described. First, the use of a cryosolvent on its own (or together with temperature) as a perturbant has allowed a resolution of the substrate binding steps of certain enzymes (myosin, D-amino acid oxidase, peroxidase and cytochrome P450). Second, by the use of cryosolvent and temperature, coupled with the classical physico-chemical perturbants, one can selectively modulate the various steps of an enzyme pathway. This approach can lead to an understanding of the mechanism of enzyme regulation. Finally, by carrying out experiments over a wide range of temperatures (-30 degrees C- +30 degrees C) and pressure (up to several kbars) in specially constructed fast reaction equipment, one can study the thermodynamic properties of the individual rate constants describing the interconversions of reaction intermediates. Experiments with creatine kinase, cytochrome P450 and peroxidase are described. The thermodynamic parameters delta H, delta G, delta S and delta V are thus measured and when this is done under different solvent conditions one can, at least within the theories available, attempt an approach to the problem of protein dynamics.     

Synthesis of hydrophilic and flexible linkers for peptide derivatization in solid phase

Four N-Fmoc protected polyoxyethylene-based amino acid type linkers were designed and synthesized for peptide derivatization in solid phase. Three of them were obtained in a crystalline form. The crystallized linkers can be stored at 4 degrees C for 2 years without significant decomposition. Protocols for biotinylation and fluorescent labeling of peptides in solid phase were developed. The linkers also provide good ionization ability for single-bead mass spectrometry analysis of peptides.     

Structural and functional dynamics of an integral membrane protein complex modulated by lipid headgroup charge

We have used membrane surface charge to modulate the structural dynamics of an integral membrane protein, phospholamban (PLB), and thereby its functional inhibition of the sarcoplasmic reticulum Ca-ATPase (SERCA). It was previously shown by electron paramagnetic resonance, in vesicles of neutral lipids, that the PLB cytoplasmic domain is in equilibrium between an ordered T state and a dynamically disordered R state and that phosphorylation of PLB increases the R state and relieves SERCA inhibition, suggesting that R is less inhibitory. Here, we sought to control the T/R equilibrium by an alternative means-varying the lipid headgroup charge, thus perturbing the electrostatic interaction of PLB's cationic cytoplasmic domain with the membrane surface. We resolved the T and R states not only by electron paramagnetic resonance in the absence of SERCA but also by time-resolved fluorescence resonance energy transfer from SERCA to PLB, thus probing directly the SERCA-PLB complex. Compared to neutral lipids, anionic lipids increased both the T population and SERCA inhibition, while cationic lipids had the opposite effects. In contrast to conventional models, decreased inhibition was not accompanied by decreased binding. We conclude that PLB binds to SERCA in two distinct structural states of the cytoplasmic domain: an inhibitory T state that interacts strongly with the membrane surface and a less inhibitory R state that interacts more strongly with the anionic SERCA cytoplasmic domain. Modulating membrane surface charge provides an effective way of investigating the correlation between structural dynamics and function of integral membrane proteins.     

Structure based design of protein linkers for zinc finger nuclease

Zinc finger nucleases are a promising tool to edit DNA in many biological applications, in particular for gene knockout. Despite many efforts the number of genes that can be effectively targeted with ZFNs remains severely limited, as available constructs cannot address arbitrary gene sequences. Here, we develop a novel concept to significantly enhance the number of DNA sequences that can be targeted by ZFN. Using an efficient computational model, we provide an extensive library of possible linker molecules between individual zinc finger motifs in the construct that can skip up to 10 base pairs between adjacent zinc finger recognition sites in the DNA sequence, which increases the number of genes that can be efficiently targeted by more than an order of magnitude.