Secondary structure of the pentraxin female protein in water determined by infrared spectroscopy: effects of calcium and phosphorylcholine.

The secondary structure of hamster female protein in aqueous solutions in the presence or absence of calcium and phosphorylcholine has been investigated using Fourier transform infrared spectroscopy. Our present studies provide the first evaluation of the secondary structure of FP and its calcium- and phosphorylcholine-dependent conformational changes. Quantitative analysis indicated that FP is composed of 50% beta-sheet, 11% alpha-helix, 29% beta-turn, and 10% random structures. Calcium- and phosphorylcholine-dependent infrared spectral changes were observed in regions assigned to beta-sheet, alpha-helix, turn, and random structures. The infrared-based secondary structure compositions were used as constraints to compute theoretical locations for the different secondary structures along the amino acid sequence of the FP protein. Two putative calcium-binding sites were proposed for FP (residues 93-109 and 150-168) as well as other members of the pentraxin family on the basis of the theoretical secondary structure predictions and the similarity in sequence between the pentraxins and EF-hand calcium-binding proteins. The changes in protein conformation detected upon binding of calcium and phosphorylcholine provide a mechanism for the effects of these ligands on physiologically important properties of the protein, e.g., activation of complement and association with amyloids.     

Prediction of the Secondary Structure of Myelin Basic Protein

An investigation into the probable secondary structure of the myelin basic protein was carried out by the application of three procedures currently in use to predict the secondary structures of proteins from knowledge of their amino acid sequences. In order to increase the accuracy of the predictions, the amino acid substitutions that occur in the basic protein from different species were incorporated into the predictive algorithms. It was possible to locate regions of probable alpha-helix, beta-structure, beta-turn, and unordered conformation (coil) in the protein. One of the predictive methods introduces a bias into the algorithm to maximize or minimize the amounts of alpha-helix and/or beta-structure present; this made it possible to assess how conditions such as pH and protein concentration or the presence of anionic amphiphilic molecules could influence the protein's secondary structure. The predictions made by the three methods were in reasonably good agreement with one another. They were consistent with experimental data, provided that the stabilizing or destabilizing effects of the environment were taken into account. According to the predictions, the extent of possible alpha-helix and beta-structure formation in the protein s severely restricted by the low frequency and extensive scattering of hydrophobic residues, along with a high frequency and extensive scattering of residues that favor the formation of beta-turns and coils. Neither prolyl residues nor cationic residues per se are responsible for the low content of alpha-helix predicted in the protein. The principal ordered conformation predicted is the beta-turn. Many of the predicted beta-turns overlap extensively, involving in some cases up to 10 residues. In some of these structures it is possible for the peptide backbone to oscillate in a sinusoidal manner, generating a flat, pleated sheetlike structure. Cationic residues located in these structures would appear to be ideally oriented for interaction with lipid phosphate groups located at the cytoplasmic surface of the myelin membrane. An analysis of possible and probable conformations that the triproline sequence could assume questions the popular notion that this sequence produces a hairpin turn in the basic protein.     

mRNA helicase activity of the ribosome

Most mRNAs contain secondary structure, yet their codons must be in single-stranded form to be translated. Until now, no helicase activity has been identified which could account for the ability of ribosomes to translate through downstream mRNA secondary structure. Using an oligonucleotide displacement assay, together with a stepwise in vitro translation system made up of purified components, we show that ribosomes are able to disrupt downstream helices, including a perfect 27 base pair helix of predicted T(m) = 70 degrees . Using helices of different lengths and registers, the helicase active site can be localized to the middle of the downstream tunnel, between the head and shoulder of the 30S subunit. Mutation of residues in proteins S3 and S4 that line the entry to the tunnel impairs helicase activity. We conclude that the ribosome itself is an mRNA helicase and that proteins S3 and S4 may play a role in its processivity.     

Identification of functional subclasses in the DJ-1 superfamily proteins

Genomics has posed the challenge of determination of protein function from sequence and/or 3-D structure. Functional assignment from sequence relationships can be misleading, and structural similarity does not necessarily imply functional similarity. Proteins in the DJ-1 family, many of which are of unknown function, are examples of proteins with both sequence and fold similarity that span multiple functional classes. THEMATICS (theoretical microscopic titration curves), an electrostatics-based computational approach to functional site prediction, is used to sort proteins in the DJ-1 family into different functional classes. Active site residues are predicted for the eight distinct DJ-1 proteins with available 3-D structures. Placement of the predicted residues onto a structural alignment for six of these proteins reveals three distinct types of active sites. Each type overlaps only partially with the others, with only one residue in common across all six sets of predicted residues. Human DJ-1 and YajL from Escherichia coli have very similar predicted active sites and belong to the same probable functional group. Protease I, a known cysteine protease from Pyrococcus horikoshii, and PfpI/YhbO from E. coli, a hypothetical protein of unknown function, belong to a separate class. THEMATICS predicts a set of residues that is typical of a cysteine protease for Protease I; the prediction for PfpI/YhbO bears some similarity. YDR533Cp from Saccharomyces cerevisiae, of unknown function, and the known chaperone Hsp31 from E. coli constitute a third group with nearly identical predicted active sites. While the first four proteins have predicted active sites at dimer interfaces, YDR533Cp and Hsp31 both have predicted sites contained within each subunit. Although YDR533Cp and Hsp31 form different dimers with different orientations between the subunits, the predicted active sites are superimposable within the monomer structures. Thus, the three predicted functional classes form four different types of quaternary structures. The computational prediction of the functional sites for protein structures of unknown function provides valuable clues for functional classification.     

Analysis of chloroplast transit peptide function using mutations in the carboxyl-terminal region

Protein import into chloroplasts requires a transit peptide, which interacts with the chloroplast transport apparatus and leads to translocation of the protein across the chloroplast envelope. While the amino acid sequences of many transit peptides are known, functional domains have been difficult to identify. Previous studies suggest that the carboxyl terminus of the transit peptide for ribulose bisphosphate carboxylase small subunit is important for both translocation across the chloroplast envelope and proper processing of the precursor protein. We dissected this region using in vitro mutagenesis, creating a set of mutants with small changes in primary structure predicted to cause alterations in secondary structure. The import behavior of the mutant proteins was assessed using isolated chloroplasts. Our results show that removal of a conserved arginine residue in this region results in impaired processing, but does not necessarily affect import rates. In contrast, substituting amino acids with low reverse turn or amphiphilic potential for other original residues affected import rate but not processing.     

Polypeptide secondary structure determination by nuclear magnetic resonance observation of short proton-proton distances

The use of proton-proton nuclear Overhauser enhancement (NOE) distance information for identification of polypeptide secondary structures in non-crystalline proteins was investigated by stereochemical studies of standard secondary structures and by statistical analyses of the secondary structures in the crystal conformations of a group of globular proteins. Both regular helix and beta-sheet secondary structures were found to contain a dense network of short 1H-1H distances. The results obtained imply that the combined information on all these distances obtained from visual inspection of the two-dimensional NOE (NOESY) spectra is sufficient for determination of the helical and beta-sheet secondary structures in small globular proteins. Furthermore, cis peptide bonds can be identified from unique, short sequential proton-proton distances. Limitations of this empirical approach are that the exact start or end of a helix may be difficult to define when the adjoining residues form a tight turn, and that unambiguous identification of tight turns can usually be obtained only in the hairpins of antiparallel beta-structures. The short distances between protons in pentapeptide segments of the different secondary structures have been tabulated to provide a generally applicable guide for the analysis of NOESY spectra of proteins.     

Prediction of the secondary and tertiary structures of interferon from four homologous amino acid sequences

The secondary and tertiary structures of interferon were predicted from four homologous amino acid sequences. Three methods of secondary structure prediction gave differing results that were interpreted to suggest that there might be four α-helices that are important in the tertiary fold. The validity of this interpretation was assessed by the application of the methods to predict the secondary structures of two proteins known to consist of four α-helices. A possible tertiary model for interferon is then proposed in which the four α-helices pack into a right-handed bundle similar to that observed in several known protein structures. This model was shown to be stereochemically feasible by an α-helix docking algorithm. One of the resultant structures is shown to be compatible with the known disulphide linkages in interferon. Certain residues that are conserved between the different sequences lie near each other in our model and these residues might form a functional site. In the absence of a crystal structure for interferon, a predicted tertiary model will help further structural and functional studies.     

A systematic analysis of the beta hairpin motif in the Protein Data Bank

The beta hairpin motif is a ubiquitous protein structural motif that can be found in molecules across the tree of life. This motif, which is also popular in synthetically designed proteins and peptides, is known for its stability and adaptability to broad functions. Here, we systematically probe all 49,000 unique beta hairpin substructures contained within the Protein Data Bank (PDB) to uncover key characteristics correlated with stable beta hairpin structure, including amino acid biases and enriched interstrand contacts. We find that position specific amino acid preferences, while seen throughout the beta hairpin structure, are most evident within the turn region, where they depend on subtle turn dynamics associated with turn length and secondary structure. We also establish a set of broad design principles, such as the inclusion of aspartic acid residues at a specific position and the careful consideration of desired secondary structure when selecting residues for the turn region, that can be applied to the generation of libraries encoding proteins or peptides containing beta hairpin structures.     

Solution NMR structure of S100B bound to the high-affinity target peptide TRTK-12

The solution NMR structure is reported for Ca(2+)-loaded S100B bound to a 12-residue peptide, TRTK-12, from the actin capping protein CapZ (alpha1 or alpha2 subunit, residues 265-276: TRTKIDWNKILS). This peptide was discovered by Dimlich and co-workers by screening a bacteriophage random peptide display library, and it matches exactly the consensus S100B binding sequence ((K/R)(L/I)XWXXIL). As with other S100B target proteins, a calcium-dependent conformational change in S100B is required for TRTK-12 binding. The TRTK-12 peptide is an amphipathic helix (residues W7 to S12) in the S100B-TRTK complex, and helix 4 of S100B is extended by three or four residues upon peptide binding. However, helical TRTK-12 in the S100B-peptide complex is uniquely oriented when compared to the three-dimensional structures of other S100-peptide complexes. The three-dimensional structure of the S100B-TRTK peptide complex illustrates that residues in the S100B binding consensus sequence (K4, I5, W7, I10, L11) are all involved in the S100B-peptide interface, which can explain its orientation in the S100B binding pocket and its relatively high binding affinity. A comparison of the S100B-TRTK peptide structure to the structures of apo- and Ca(2+)-bound S100B illustrates that the binding site of TRTK-12 is buried in apo-S100B, but is exposed in Ca(2+)-bound S100B as necessary to bind the TRTK-12 peptide.     

Structural motifs of the bacterial ribosomal proteins S20, S18 and S16 that contact rRNA present in the eukaryotic ribosomal proteins S25, S26 and S27A,respectively

The majority of constitutive proteins in the bacterial 30S ribosomal subunit have orthologues in Eukarya and Archaea. The eukaryotic counterparts for the remainder (S6, S16, S18 and S20) have not been identified. We assumed that amino acid residues in the ribosomal proteins that contact rRNA are to be constrained in evolution and that the most highly conserved of them are those residues that are involved in forming the secondary protein structure. We aligned the sequences of the bacterial ribosomal proteins from the S20p, S18p and S16p families, which make multiple contacts with rRNA in the Thermus thermophilus 30S ribosomal subunit (in contrast to the S6p family), with the sequences of the unassigned eukaryotic small ribosomal subunit protein families. This made it possible to reveal that the conserved structural motifs of S20p, S18p and S16p that contact rRNA in the bacterial ribosome are present in the ribosomal proteins S25e, S26e and S27Ae, respectively. We suggest that ribosomal protein families S20p, S18p and S16p are homologous to the families S25e, S26e and S27Ae, respectively.     

Distinct structural features of the alpha and beta subunits of nitrogenase molybdenum-iron protein of Clostridium pasteurianum: an analysis of amino acid sequences

Nitrogenase is composed of two separately purified proteins, a molybdenum-iron (MoFe) protein and an iron (Fe) protein. Structural genes (nifD and nifK) encoding alpha and beta subunits of the MoFe protein of Clostridium pasteurianum (Cp) have been cloned and sequenced. The deduced amino acid sequences were analyzed for structures that could be related to the unique properties of the Cp protein, particularly its low capacity to form an active enzyme with a heterologous Fe protein. Cp nifK is located immediately downstream from Cp nifD, with the start codon of nifK overlapping by one base with the stop codon of nifD. An open reading frame following nifK was identified as nifE. The amino acid sequence deduced from nifK encompasses the partial amino acid sequences previously reported from the isolated beta subunit. Cp nifK encodes a polypeptide of 458 amino acid residues (Mr 50 115) whose amino-terminal region is about 50 residues shorter than the otherwise conserved corresponding polypeptides from four other organisms. In contrast, Cp alpha subunit (nifD product) contains an additional stretch of 50 amino acid residues in the 380-430 region, which is unique to the Cp protein. It therefore appears that the combined size of the alpha and beta subunits could be important to nitrogenase function. An analysis of the predicted secondary structure from the amino acid sequence of each subunit from three species (C. pasteurianum, Azotobacter vinelandii, and Rhizobium japonicum) further revealed structural features, including regions adjacent to some of the conserved cysteine residues, differentiating the Cp MoFe protein from others. These different regions may be further tested for correlation with distinct properties of Cp nitrogenase.     

Nucleotide sequence of cDNA clones encoding the complete precursor for subunit delta of thylakoid-located ATP synthase from spinach

The nucleotide sequence of the entire nuclear-encoded precursor for subunit delta of the ATP synthase from spinach thylakoid membranes was determined by cDNA sequencing. Appropriate recombinant DNAs were selected from pBR322 and lambda gt11 libraries made from polyadenylated RNA of greening spinach seedlings. The mature protein consists of 187 amino acid residues corresponding to a molecular weight of 20468. The precursor protein (257 amino acid residues; M _r=27676) is probably processed between a Met-Val bond. The predicted secondary structure of the transit sequence (70 residues; 7.2 kDa) resembles that of the Rieske Fe/S polypeptide, but shows little similarity with those of stromal or luminal proteins. The comparison of the chloroplast delta amino acid sequence with the published delta sequences from respiratory ATP synthases of bacterial and mitochondrial sources and from the thylakoid ATP synthase of the cyanobacterium Synechococcus suggests substantial divergence at the genic level although structural elements appear to be remarkably conserved.     

The crystal structure of the tryptophan synthase beta subunit from the hyperthermophile Pyrococcus furiosus. Investigation of stabilization factors.

The structure of the tryptophan synthase beta2 subunit (Pfbeta2) from the hyperthermophile, Pyrococcus furiosus, was determined by X-ray crystallographic analysis at 2.2 A resolution, and its stability was examined by DSC. This is the first report of the X-ray structure of the tryptophan synthase beta2 subunit alone, although the structure of the tryptophan synthase alpha2beta2 complex from Salmonella typhimurium has already been reported. The structure of Pfbeta2 was essentially similar to that of the beta2 subunit (Stbeta2) in the alpha2beta2 complex from S. typhimurium. The sequence alignment with secondary structures of Pfbeta and Stbeta in monomeric form showed that six residues in the N-terminal region and three residues in the C-terminal region were deleted in Pfbeta, and one residue at Pro366 of Stbeta and at Ile63 of Pfbeta was inserted. The denaturation temperature of Pfbeta2 was higher by 35 degrees C than the reported values from mesophiles at approximately pH 8. On the basis of structural information on both proteins, the analyses of the contributions of each stabilization factor indicate that: (a) the higher stability of Pfbeta2 is not caused by either a hydrophobic interaction or an increase in ion pairs; (b) the number of hydrogen bonds involved in the main chains of Pfbeta is greater by about 10% than that of Stbeta, indicating that the secondary structures of Pfbeta are more stabilized than those of Stbeta and (c) the sequence of Pfbeta seems to be better fitted to an ideally stable structure than that of Stbeta, as assessed from X-ray structure data.     

Determination of the secondary structure of proteins from the amide I band of the laser Raman spectrum

The amide I band in the laser Raman spectrum of proteins has been resolved into six components, each representing residues in a different type of secondary structure. These structure types are ordered or bihydrogen-bonded helix (believed to be located in the center of helical segments), disordered or monohydrogen-bonded helix (believed to be located at the ends of helical segments), antiparallel beta sheet, parallel beta sheet, reverse turn, and undefined. The Raman spectrum representing 100% of each type of residue conformation has been computed from the solvent-subtracted Raman spectra of ten proteins with known secondary structure, plus poly-l-lysine using a least-squares solution of the overdetermined system of equations. Linear combinations of these reference spectra were then fitted to the experimental amide I spectra of these and other proteins to estimate the fractions of residues in these conformations. Statistical tests suggest that the discrimination between bihydrogen-bonded helix and monohydrogen-bonded helix is significant as is the discrimination between parallel and antiparallel β-sheet. However, the discrimination between random structure and turns has not yet been accomplished by these studies. The absolute difference between X-ray and Raman estimates of structure for 17 protein samples is generally less than 6%. We conclude that detailed and reasonably accurate estimates of secondary structure can be derived from the amide I spectra of proteins.     

An investigation of protein subunit and domain interfaces

Protein structures were collected from the Brookhaven Database of tertiary architectures that displayed oligomeric association (24 molecules) or whose polypeptide folding revealed domains (34 proteins). The subunit and domain interfaces for these proteins were respectively examined from the following aspects: percentage water-accessible surface area buried by the respective associations, surface compositions and physical characteristics of the residues involved in the subunit and domain contacts, secondary structural state of the interface amino acids, preferred polar and non-polar interactions, spatial distribution of polar and non-polar residues on the interface surface, same residue interactions in the oligomeric contacts, and overall cross-section and shape of the contact surfaces. A general, consistent picture emerged for both the domain and subunit interfaces.     

Prediction of protein interaction sites from sequence profile and residue neighbor list.

Protein-protein interaction sites are predicted from a neural network with sequence profiles of neighboring residues and solvent exposure as input. The network was trained on 615 pairs of nonhomologous complex-forming proteins. Tested on a different set of 129 pairs of nonhomologous complex-forming proteins, 70% of the 11,004 predicted interface residues are actually located in the interfaces. These 7732 correctly predicted residues account for 65% of the 11,805 residues making up the 129 interfaces. The main strength of the network predictor lies in the fact that neighbor lists and solvent exposure are relatively insensitive to structural changes accompanying complex formation. As such, it performs equally well with bound or unbound structures of the proteins. For a set of 35 test proteins, when the input was calculated from the bound and unbound structures, the correct fractions of the predicted interface residues were 69 and 70%, respectively.     

In vivo analysis of plant RNA structure: soybean 18S ribosomal and ribulose-1,5-bisphosphate carboxylase small subunit RNAs

A method to investigate the structure of RNA molecules within intact plant tissues has been developed. The RNA structures are analyzed using dimethyl sulfate (DMS), which modifies substituents of adenine and cytosine residues within single-stranded regions of RNA molecules. Reactive sites are identified by primer extension analysis. Using this procedure, an analysis of the secondary structure of the cytoplasmic 18S ribosomal RNA in soybean seedling leaves has been completed. DMS modification data are in good agreement with the phylogenetic structure predicted for soybean 18S rRNA. However, there are a few notable exceptions where residues thought to be involved in double-stranded regions in all 18S rRNAs are strongly modified in soybean leaf samples. These data taken together with the phylogenetic structure suggest that alternate structures may exist in vivo.The further applicability of this technique is demonstrated by comparing the modification pattern obtained in vivo to that obtained in vitro for a particular mRNA molecule encoding the small subunit of ribulose-1,5-bisphosphate carboxylase. The results obtained are compared to a predicted minimum energy secondary structure. The data indicate that the conformation of RNA molecules within the cell may not be reflected in a structural analysis of purified mRNA molecules.     

mRNA helicases: the tacticians of translational control

The translation initiation step in eukaryotes is highly regulated and rate-limiting. During this process, the 40S ribosomal subunit is usually recruited to the 5' terminus of the mRNA. It then migrates towards the initiation codon, where it is joined by the 60S ribosomal subunit to form the 80S initiation complex. Secondary structures in the 5' untranslated region (UTR) can impede binding and movement of the 40S ribosome. The canonical eukaryotic translation initiation factor eIF4A (also known as DDX2), together with its accessory proteins eIF4B and eIF4H, is thought to act as a helicase that unwinds secondary structures in the mRNA 5' UTR. Growing evidence suggests that other helicases are also important for translation initiation and may promote the scanning processivity of the 40S subunit, synergize with eIF4A to 'melt' secondary structures or facilitate translation of a subset of mRNAs.     

Structure of the ribosome-associated 5.8 S ribosomal RNA

The structure of the 5.8 S ribosomal RNA in rat liver ribosomes was probed by comparing dimethyl sulfate-reactive sites in whole ribosomes, 60 S subunits, the 5.8 S-28 S rRNA complex and the free 5.8 S rRNA under conditions of salt and temperature that permit protein synthesis in vitro. Differences in reactive sites between the free and both the 28 S rRNA and 60 S subunit-associated 5.8 S rRNA show that significant conformational changes occur when the molecule interacts with its cognate 28 S rRNA and as the complex is further integrated into the ribosomal structure. These results indicate that, as previously suggested by phylogenetic comparisons of the secondary structure, only the "G + C-rich" stem may remain unaltered and a universal structure is probably present only in the whole ribosome or 60 S subunit. Further comparisons with the ribosome-associated molecule indicate that while the 5.8 S rRNA may be partly localized in the ribosomal interface, four cytidylic acid residues, C56, C100, C127 and C128, remain reactive even in whole ribosomes. In contrast, the cytidylic acid residues in the 5 S rRNA are not accessible in either the 60 S subunit or the intact ribosome. The nature of the structural rearrangements and potential sites of interaction with the 28 S rRNA and ribosomal proteins are discussed.