Amino-functionalized zirconocene (C5H4CH(Me)NMe2)2ZrCl2, a catalyst for the dehydropolymerization of PhSiH3: Probing of peripheral substituent effects on catalyst dehydropolymerization activity

The amino-functionalized metallocene (C₅H₄CH(Me)NMe₂)₂ZrCl₂, [(Cp^N)₂ZrCl₂] was synthesized by salt metathesis of ZrCl₄ and 2 equiv. of C₅H₄CH(Me)NMe₂Li. The metallocene was obtained in good yield as a mixture of rac and meso diastereomers as established by NMR spectroscopy. The addition of 2 equiv. of n-BuLi to the metallocene (Cp^N)₂ZrCl₂ produced a co-catalyst system which was active, at a 1.0 mol% loading, in the dehydropolymerization of PhSiH₃ to poly(phenylsilane), PPSi. The PPSi was obtained as a 9:1 linear–cyclic mixture (M_w=3850, M_n=2300) as established by GPC analysis; ²⁹Si{¹H} NMR spectroscopy revealed an atactic polymer microstructure.     

Dissolution of [RhCl(PPh3)3] in the ionic liquid, 1-ethyl-3-methyl imidazolium chloroaluminate(III), and its reaction with H2. The stabilization of Rh(I) species in an ionic liquid

The solution of [RhCl(PPh₃)₃] in acidic 1-ethyl-3-methylimidazolium chloroaluminate(III) ionic liquid (AlCl₃ molar fraction, x_AlCl3=0.67) was investigated by ¹H and ³¹P{¹H} NMR. One triphenyl phosphine is lost from the complex and is protonated in the acidic media, and cis-[Rh(PPh₃)₂ClX], (2), where X is probably [AlCl₄]⁻, is formed. On, standing, 2 is converted to trans-[Rh(H)(PPh₃)₂X], (3). The reaction of 2 and H₂ also produces trans-[Rh(H)(PPh₃)₂X], (3). ¹H and ³¹P{¹H} NMR support the suggestion that a weak ligand such as [AlCl₄]⁻, present in solution may interact with the metal centre. When [RhCl(PPh₃)₃] is dissolved in CH₂Cl₂/AlCl₃/HCl for comparison, two exchanging isomers of what is probably [RhH{(μ-Cl)₂AlCl₂}{(μ-Cl)AlCl₃}(PPh₃)₂], (6) and (7), are formed.     

Equilibrium and structure of thallium(III)–ethylenediamine complexes in pyridine solution and in solid

The formation of three [Tl(en)_n]³⁺ complexes (n=1–3) in a pyridine solvent has been established by means of ²⁰⁵Tl and ¹H NMR. Their stepwise stability constants based on concentrations, K_n=[Tl(en)_n ³⁺]/{[Tl(en)_n−1 ³⁺]·[en]}, at 298 K in 0.5 M NaClO₄ ionic medium in pyridine, were calculated from ²⁰⁵Tl NMR integrals: log K₁=7.6±0.7; log K₂=5.2±0.5 and log K₃=2.64±0.05. Linear correlation between both the ²⁰⁵Tl NMR shifts and spin–spin coupling ²⁰⁵Tl–¹H versus the stability constants has been found and discussed. A single crystal with the composition [Tl(en)₃](ClO₄)₃ was synthesized and its structure determined by X-ray diffraction. The Tl³⁺ ion is coordinated by three ethylenediamine ligands via six N-donor atoms in a distorted octahedral fashion.     

Molecular dynamics of N,N′-di-p-fluorophenyltriazenido complex of platinum (II)

The triazenide complex of Pt(II) trans-(o-Tol)Pt(PEt₃)₂N₃Ar₂(1) (Ar = p-FC₆H₄) was synthesized by reaction of (o-Tol)Pt(PEt₃)₂BF₄ with Ar₂N₃Na. The ¹H, ¹⁹F and ³¹P NMR spectra of this complex in toluene-d₈ were studied at different temperatures. Two kinds of dynamic processes were observed. The first one is the intramolecular N,N′ migration of the (o-Tol)Pt(PEt₃)₂ group, detected by ¹⁹F NMR. The second process, revealed by ¹H, ¹⁹P NMR, is the rotation around the partially double N(2)–N(3) bond. Thermodynamic parameters for these processes were calculated from dynamic NMR spectra.     

高温下喷施水杨酸和磷酸二氢钾对中稻生理特征和产量的影响

为探寻减轻水稻抽穗开花期高温热害的技术途径,以3个籼型杂交稻品种为材料,于2017—2018年在江西省吉安县、余干县、南昌县进行田间试验.在抽穗开花期自然高温下,设置叶面喷施5个不同浓度的水杨酸(SA)处理(SA₁～SA₅分别为100、500、1000、1500、2000 μmol·L^-1)和5个不同浓度的磷酸二氢钾(KH₂PO₄)处理(K₁～K₅分别为7.35、14.70、22.05、29.40、36.75 mmol·L^-1),并以叶面喷施蒸馏水为对照(CK),分析中稻生理特征和产量.结果表明: 与对照相比,SA处理和KH₂PO₄处理分别降低了剑叶丙二醛含量,提高了叶绿素、可溶性糖、可溶性蛋白、脯氨酸含量和超氧化物歧化酶、过氧化物酶活性,其中SA₂和K₃处理效果最好.SA₂、SA₃和K₃、K₄处理提高了水稻穗粒数、结实率和产量,其中SA₂和K₃处理效果显著,与对照相比,SA₂处理分别使穗粒数、结实率和产量增加了7.0%、4.0%和11.9%,K₃处理增加了3.9%、4.7%和6.6%.抽穗开花期高温下,采取叶面喷施500 μmol·L^-1 SA或22.05 mmol·L^-1 KH₂PO₄的技术措施可显著提高中稻产量.     

Synthesis and characterization of organomolybdenum and organotungsten halides containing the η-pentabenzylcyyclopentadienyl ligand η-Bz5C5M(CO)3X (M = Mo, W; X = Cl, Br, I). The X-ray molecular structure of η-Bz5C5Mo(CO)3I

An improved synthetic procedure for pentabenzylcyclopentadiene Bz₅C₅H was developed. Six new organomolybdenum and organotungsten halides η⁵-Bz₅C₅M(CO)₃X(M = Mo, W; X = Cl, Br, I) were syntesized through the reaction of η⁵-Bz₅C₅M(CO)₃Li (derived from Bz₅C₅H, n-BuLi and M(CO)₆) with PCl₃, PBr₃ or I₂ and characterized by elemental analysis, IR and ¹H NMR spectroscopy. The structure of η⁵-Bz₅C₅Mo(CO)₃I was determined by single-crystal X-ray diffraction techniques. It crystallized in the monoclinic space groupp P2/c with cell parameters a = 13.294(4), B = 15.147(4), C = 19.027(3) Å, β = 108.32(2)°, V = 3637(2) ų, Z = 4 and D_x = 1.50 g cm⁻³. The final R value was 0.035 for 4564 observed reflections.     

Synthesis, platinum(II) complexes and structural aspects of the new tetradentate phosphine cis,trans,cis-1,2,3,4-tetrakis(diphenylphosphino)cyclobutane

Several novel dimers of the composition [M₂Cl₄(trans-dppen)₂] (M=Ni (1), Pd (2), Pt (3)) containing trans-1,2-bis(diphenylphosphino)ethene (trans-dppen) have been prepared and characterized by X-ray diffraction methods, NMR spectroscopy (¹⁹⁵Pt{¹H}, ³¹P{¹H}), elemental analyses, and melting points. The intramolecular [2+2] photocycloaddition of the two diphosphine-bridges in 3 produces [Pt₂Cl₄(dppcb)] (4), where dppcb is the new tetradentate phosphine cis,trans,cis-1,2,3,4-tetrakis(diphenylphosphino)cyclobutane. Neither 1 nor the free diphosphine trans-dppen shows this reaction. In the case of 2 the photocycloaddition is slower than in 3. This difference can be explained by the shorter distance between the two aliphatic double bonds in 3 than in 2, but also different transition probabilities within ground and excited states of the used metals could be involved. Furthermore, variable-temperature ³¹P{¹H} NMR spectroscopy of 2 or 3 reveals a negative activation entropy of 2 for the [2+2] photocycloaddition, but a positive of 3. The removal of chloride from 4 by precipitating AgCl with AgBF₄, and subsequent treatment with 2,2′-bipyridine (bipy) or 1,10-phenanthroline (phen) leads to [Pt₂(dppcb)(bipy)₂](BF₄)₄ (5) and [Pt₂(dppcb)(phen)₂](BF₄)₄ (6), respectively. In an analogous reaction of 4 with PMe₂Ph or PMePh₂, [Pt₂(dppcb)(PMe₂Ph)₄](BF₄)₄ (7) and [Pt₂(dppcb)(PMePh₂)₄](BF₄)₄ (8) are formed. Complexes 1–8 show square–planar coordinations, where the compounds 4–8 have also been characterized by the above mentioned methods together with fast atom bombardment mass spectrometry (7, 8). The crystal structure of 4 reveals two conformations, which arise from an energetic competition between the sterical demands of dppcb and an ideal square–planar environment of Pt(II). The free tetraphosphine dppcb can be obtained easily from 4 by treatment with NaCN. It has been characterized fully by the above methods including ¹³C{¹H} and ¹H NMR spectroscopy. The X-ray structure analysis shows the pure MMMP-enantiomer in the solid crystal, which is therefore optically active. This chirality is induced by a conformation of dppcb, where all four PPh₂ groups are non-equivalent. Variable-temperature ³¹P{¹H} NMR spectroscopy of dppcb confirms this explanation, since the single signal at room temperature is split into two doublets at 183 K. The goal of this article is to demonstrate the facile production of a new tetradentate phosphine from a diphosphine precursor via Pt(II) used as a template.     

Steric effects on the substitution of pentaamine-chromium(III) and -rhodium(III) complexes. Anation reaction rate constants as an indicative of the dissociative shift of the mechanism on crowding the [M(RNH2)5H2O] (M = Rh, R = H, Me, Et, Pr; M = Cr, R = H, Me, Pr) complexes

The kinetics of the anation reactions of [M(RNH₂)₅H₂O]³⁺ (M = Rh, R = H, Me, Et, Pr; M = Cr, R = H, Me, Pr) with several ligands (H₃PO₄/H₂PO₄⁻, H₃PO₃/H₂PO₃⁻, CF₃COO⁻, Br⁻, Cl⁻, SCN⁻) have been studied at different temperatures and acidities at I = 1.0 M (LiClO₄. Results obtained for the anation rate constants and thermal activation parameters are compared with the previously published data for R = H, in order to establish the effects of the amine substituents in the reaction mechanism proposed for the substitution reactions of these complexes. The results obtained are interpreted on the basis of a mechanism where the bond formation process is more important in the substitution on M = Cr complexes than in that of the M = Rh complexes, as already pointed out for the published ΔΛ^≠ values for the water exchange on these systems. A simple Langford-Gray classification becomes inadequate to describe these situations where the increase of the steric demand of the amine substituents shifta the I_a-I_d classification to the I_d side, although no dramatic changes in the reaction mechanism are found. It is concluded that a More O'Ferall ‘continuous’ type of approach to the mechanism classification of the substitution reactions is much more useful in this case.     

Chelated alkyl halide manganese complexes (η:η-C5H4CH2CH2X)Mn(CO)2 from photolysis of (η-C5H4CH2CH2X)Mn(CO)3

Manganese tricarbonyl complexes (η⁵-C₅H₄CH₂CH₂Br)Mn(CO)₃ (3) and (η⁵-C₅H₄CH₂CH₂I)Mn(CO)₃ (4), with an alkyl halide side chain attached to the cyclopentadienyl ligand, were synthesized as possible precursors to chelated alkyl halide manganese complexes. Photolysis of 3 or 4 in toluene, hexane or acetone-d₆ resulted in CO dissociation and intramolecular coordination of the alkyl halide to manganese to produce (η⁵:η¹-C₅H₄CH₂CH₂Br)Mn(CO)₂ (5) and (η⁵:η¹-C₅H₄CH₂CH₂I)Mn(CO)₂ (6). Low temperature NMR and IR spectroscopy established the structures of 5 and 6. Photolysis of 3 in a glass matrix at 91 K demonstrated CO release from manganese. Low temperature NMR spectroscopy established that the coordinated alkyl halide complexes are stable to approximately −20°C.     

Preparation and characterization of poly(ethylene glycol)-g-chitosan with water- and organosolubility

A new scheme was proposed for synthesizing poly(ethylene glycol)-g-chitosan (PEG-g-CS), where methoxy poly(ethylene glycol) iodide (MPEG-I) (M_n 2000) was used for N-substitution of triphenylmethyl chitosan (TPM-CS) in organic medium. The graft copolymers were obtained by subsequent removal of protecting groups with dichloroacetic acid. By varying PEG-I/TPM-CS feed ratio, the grafting levels (GL) of PEG can be adjusted. The chitosan derivatives were characterized by FTIR, ¹H NMR, ¹³C NMR and DSC. All the copolymers were soluble in water over wide pH range. Furthermore, organosolubility of the hybrids in DMF and DMSO was also achieved when the DS value more than 24%. The lysozyme degradation rate of the copolymers in aqueous neutral medium decreased with the increase of GL value.     

Cyclic tetranuclear half-sandwich ruthenium(II) complexes with 4,7-phenanthroline and hydroxo bridges: crystal structure, solution behaviour and binding to nucleosides

The reaction between [(η⁶-p-cymene)Ru(H₂O)₃]X₂ and 4,7-phenanthroline (phen) leads to the formation of the rectangular tetranuclear complexes [(η⁶-p-cymene)₄Ru₄(μ-4,7-phen-N⁴,N⁷)₂(μ-OH)₄]X₄ (X = NO₃, 1a; SO₃CF₃, 1b) which have been structurally characterised by X-ray crystallography. ¹H NMR spectroscopic studies suggest the presence of a partially dissociated dinuclear species of type [(η⁶-p-cymene)₂Ru₂(μ-4,7-phen-N⁴,N⁷)(solv)₄]⁴⁺ in equilibrium with the tetranuclear cyclic species found in the solid state. The temperature effect for this equilibrium was studied by variable temperature ¹H NMR experiments in D₂O and MeOD. The results reveal that the proportion of the tetranuclear species increases with the polarity of the solvent which favour stacking interactions between the phenanthroline moieties. In addition, the reactivity of the tetranuclear species towards the nucleosides guanosine (Guo), cytidine (Cyt), 2′-deoxythymidine (Thy) and 2′-deoxyadenosine (dAdo) has been monitored by ¹H NMR as a potential model for the interaction of the 1 species with the probable DNA target. The results reveal that the 1 systems are able to bind the nucleobases endocyclic nitrogen atoms of Guo Cyt, and dAdo.     

Mono-η complexes of chromium(II) and chromium(0). Electron demanding substituents, structural and spectroscopic data comparisons

Using thermal and photochemical methods a series of new chromium complexes has been prepared: (ν⁶-p-C₆H₄F₂)Cr(CO)₃; (ν⁶-C₆H₅CF₃)Cr(CO)₃; [m-C₆H₄(CF₃)₂]Cr(CO)₃; (ν⁶-C₆H₅F)Cr(CO)₂H(SiCl₃); (ν⁶-C₆H₅F)Cr(CO)₂(SiCl₃)₂; (p-C₆H₄F₂)Cr(CO)₂-H(SiCl₃); (C₆H₅CF₃)Cr(CO)₂H(SiCl₃(p-C₆H₄F₂)Cr(CO)₂(SiCl₃)₂; C₆H₅CF₃)Cr(CO)₂(SiCl₃)₂; [m-C₆H₄(CF₃)₂]Cr(CO)₂-H(SiCl₃); [m-C₆H₄(CF₃)₂]Cr(CO)₂(SiCl₃)₂. Two compounds were structurally characterized by X-ray diffraction. These data combined with IR and ¹H NMR have allowed assessment of some of the electronic and steric effects. The Cr-arene bond is considerably longer in the Cr(II) derivatives than in the Cr(0) species. Also the Cr center, as might be expected, is less electron rich in the Cr(II) dicarbonyl disilyl derivatives. The ν⁶-p-C₆H₄F₂ ligands are slightly folded so that the C---F carbons are moved further away from the Cr center. Comparison of structural and electronic effects is made with a series of similar chromium compounds reported in the literature. These new (arene)Cr(II) derivatives possess more labile ν⁶-arene ligands, which promise a rich chemistry at the chromium center.     

Optimal production of sulphuric acid by Thiobacillus thiooxidans using response surface methodology

Response surface methodology was applied to determine the optimal medium composition for sulphuric acid production by an indigenous Thiobacillus thiooxidans. With a view to reducing the number of experiments and obtaining the mutual interactions between the variables, a 2⁴ full-factorial central composite design was employed for experimental design and analysis of the results. Four independent variables, KH₂PO₄, (NH₄)₂SO₄, MgSO₄ and elemental sulphur, in the growth medium were tested. Elemental sulphur was found to exhibit positive correlation with the sulphuric acid yield, whereas the other three variables showed no significant effect. No mutual interactions were found between elemental sulphur and each of the other three variables. The optimal composition of the growth medium to achieve the optimal production of sulphuric acid was determined as follows (g/l): KH₂PO₄=3.5, (NH₄)₂SO₄=4.9, MgSO₄=0.7 and elemental sulphur=23.7. The corresponding sulphuric acid production and dry cell weight were 38 662 ppm and 0.7 g/l, which are about 2.6- and 1.75-fold increase, respectively, compared with those using the conventional T. thiooxidans optimum growth medium.     

Origin of deoxycorticosterone sulfate (DOC-SO4) in plasma of pregnant women: Pregnenolone-3,21-disulfate is a placental precursor of DOC-SO4

The plasma levels of deoxycorticosterone sulfate (DOC-SO₄) in near-term pregnant women are 100 times those in plasma of men or non-pregnant women. Yet, neither the tissue site of synthesis nor the precursor of DOC-SO₄ that enters maternal plasma is known. Several potential sources have been excluded: plasma DOC-SO₄ is not derived from plasma DOC; and the secretion of C₂₁-steroids (other than aldosterone) from the maternal adrenals during human pregnancy is not increased. Similarly, the transfer of DOC-SO₄ from fetal plasma cannot account for the high level of DOC-SO₄ in the maternal compartment, and a reduced clearance of plasma DOC-SO₄ during pregnancy cannot account for the high levels of DOC-SO₄. Indeed, the rate of clearance of DOC-SO₄ from plasma is 10–100 times that of most other steroid sulfates. To address this question further, we evaluated the possibility that fetal plasma pregnenolone-3,21-disulfate serves as a precursor for DOC-SO₄ formation in the placenta. The preferential hydrolysis of the 3β-sulfate of pregnenolone-3,21-disulfate in placenta would give rise to pregnenolone-21-monosulfate, which, if acted upon by placental 3β-hydroxysteroid dehydrogenase/Δ^{5 → 4} isomerase, could give DOC-SO₄. [³H]Pregnenolone-3,21-disulfate was incubated with minces of human placental tissue for 5, 20, 60 and 120 min. Radiolabelled DOC-SO₄, DOC, and pregnenolone-21-monosulfate were isolated from the incubation media and quantified. After a 5 min incubation, 7.5% of substrate was converted to DOC-SO₄; and after 20, 60 and 120 min 30% of the [³H]pregnenolone-3,21-disulfate was recovered from the media of these incubations as [³H]DOC-SO₄. [³H]DOC was also present in the incubation media and the concentrations of this product increased as a function of incubation time. Therefore, pregnenolone-3,21-disulfate, which is present in very high concentrations in fetal plasma (1000 ng/ml), is metabolized in the placenta to DOC-SO₄. Because of the fetal and maternal vascular arrangements of the hemochorioendothelial placenta of human pregnancy, steroids produced in syncytiotrophoblasts preferentially enter the intervillous space; thus, fetal plasma pregnenolone-3,21-disulfate may serve as a placental precursor of maternal plasma DOC-SO₄.     

Effects of increasing polymer hydrophobicity on distribution ratios of TcO4 in polyethylene/poly(propylene glycol)-based aqueous biphasic systems

The partitioning behavior of the pertechnetate anion was studied in aqueous biphasic systems (ABS) formed from (NH₄)₂SO₄ and four types of polymers – poly(ethylene glycol) (PEG), poly(propylene glycol) (PPG), Pluronic (a PEG/PPG block copolymer), and polyvinylpyrrolidone (PVP). Phase diagrams are reported for five (NH₄)₂SO₄-polymer ABS systems including the polymers PEG-2000, PEG-3400, PEG-12 000, Pluronic-L64 (average molecular mass ≈ 2900), and PVP-K15 (average M_r≈10 000). Distribution ratios for the TcO₄⁻ anion in each of these ABS were investigated as a function of increasing salt concentration. In addition, the water-insoluble polymer PPG-2000 was studied. Pertechnetate partitions nearly quantitatively to the polymer-rich phase in each ABS, however, distribution ratios of near one were found for the PPG system. The relative ordering of the distribution ratios is PPGPVP-2000PEG-3400>PEG-12 000, exhibiting the expected increase in phase incompatibility with increasing polymer M_r. Investigation of pertechnetate partitioning in two additional ABS based on K₃PO₄ and NaOH with Pluronic-L64 revealed trends similar to those reported for PEG-2000; the distribution ratio (D) values increase in the order NaOH<(NH₄)₂SO₄3PO₄. Despite the higher distribution ratios from Pluronic-L64 at lower concentrations than found for PEG, the limited useable range of salt concentrations available may limit the practical utilization of this polymer in ABS separations.     

Coordination of a disubstituted alkene in a chelated d-metal-alkyl-alkene complex. Evidence for equilibrium between complexes with coordinated and free alkenes

Addition of (Cp*₂YH)₂ (4) to 2-methyl-1,4-pentadiene produced the yttrium-alkyl-alkene chelate complex Cp*₂YCH₂CH₂CH₂C(CH₃)=CH₂ (2) in which a disubstituted alkene is complexed to the metal center. Evidence for coordination of the alkene unit of 2 comes from the ¹H and ¹³C NMR chemical shifts of the vinyl units and from observation of nOe effects between Cp* protons and vinyl hydrogens. The disubstituted alkene ligand of 2 is weakly bound, and evidence for an equilibrium with substantial amounts of complex 3 with a free alkene was obtained from variable temperature ¹H NMR spectroscopy.     

Monitoring Anaerobic Natural Attenuation of Petroleum Using a Novel In Situ Respiration Method in Low-Permeability Sediment

Assessing petroleum biodegradation rates is an important part of predicting natural attenuation in subsurface sediments. Monitoring carbon dioxide (CO₂) and methane (CH₄) produced in situ, and their radiocarbon ¹⁴C), stable carbon (¹³C) and deuterium (D). signature provide a novel method to assess anaerobic microbial processes. Our objectives were to: (1) estimate the rate of anaerobic petroleum hydrocarbon (PH) mineralization by monitoring the production of soil gas CH₄ and CO₂ in the vadose zone of low-permeability sediment, (2) evaluate the dominant microbial processes using δ¹³C and δD, and (3) determine the proportion of CH₄ and CO₂ attributable to anaerobic mineralization of PH using ¹⁴C analysis. Argon was sparged into the subsurface to dilute existing CO₂ and CH₄ concentrations. Vadose zone CO₂, CH₄, oxygen, total combustible hydrocarbons, and argon concentrations were measured for 75 days. CO₂ and CH₄ samples were collected on day 86 and analyzed for ¹⁴C, δ¹³C, and δD. Based on CH₄ soil gas production, the anaerobic biodegradation rate was estimated between 0.017 to 0.055 mg/kg soil-d. CH₄ ¹⁴C (2.6 pMC), δ¹³C (-45.64‰), and δD (-316‰) values indicated that fermentation of PH was the sale source of CH₄ in the vadose zone. CO₂ ¹⁴C (62 pMC) indicated that approximately 47% of the total CO₂ was from PH mineralization and 53% from plant root respiration. Although low-permeability sediment increases the difficulty of completely replacing in situ soil gas and assuring anaerobic conditions, this novel respiration method distinguished between anaerobic processes responsible for PH degradation.     

HNO3/H3PO4–NANO2 mediated oxidation of cellulose — preparation and characterization of bioabsorbable oxidized celluloses in high yields and with different levels of oxidation

The reaction of cellulose with a mixture of HNO₃/H₃PO₄–NaNO₂ (2:1:1.4, v/v/%w) at room temperature for different time intervals has been investigated to produce oxidized cellulose (OC), a biocompatible and bioresorbable polymer. The results revealed an increase in carboxyl content of OC with increasing reaction time, corresponding to about 8.0, 13.4, 17.4 and 18.4% carboxyl content after 12, 24, 36, and 48 h, respectively. The yield of OC ranged between 75 and 81%. The use of different ratios of HNO₃ and H₃PO₄, (11:1, 4:1, 2:1, 1:1, 1:2, and 1:4; v/v), in the reaction had no significant effect on the carboxyl content and yield of the OC products. All products, as produced, were low crystallinity (27–35%) fibrous materials. The length of fibers decreased with increasing reaction time. After ball milling for 24 h, the length of fibers further decreased and products converted into a fine powder consisting of small fibers and aggregated non-fibrous particles. The degrees of polymerization (DP) of the OC products produced after 12, 24, and 48 h of reaction duration were 81, 63, and 53, respectively. After ball milling for 24 h, the corresponding values changed to 57, 51 and 46. However, no significant change in the crystallinity of the products was noted after ball milling. The TGA results showed the OC products to be less thermally stable than cellulose. The degradation temperature appears to decrease with increasing carboxyl content. In conclusion, the results show that the low crystallinity OC products can be successfully prepared in high yields and with different levels of carboxyl content from cellulose by treatment with a mixture of HNO₃/H₃PO₄–NaNO₂.     

Structure—activity studies leading to potent chloride channel blockers: 5e-tert-butyl-2-[4-(substituted-ethynyl)phenyl]-1,3-dithianes

5e-tert-Butyl-2e-[4-(substituted-ethynyl)phenyl]-1,3-dithianes with selected functional groups (R) on the ethynyl moiety are potent blockers of the GABA-gated chloride channel measured as inhibitor concentration (IC₅₀) for 4-n-[³H]propyl-1-(4-ethynylphenyl)-2, 6,7-trioxabicyclo[2.2.2]octanebinding to bovine brain membranes. The terminal R substituents were introduced by coupling 5e-tert-butyl-2e-(4-iodophenyl)-1,3-dithiane with HC ≡ CR or 5e-tert-butyl-2e-(4-ethynylphenyl)-1,3-dithiane with XR. The potency of the parent compound (R=H) with an IC₅₀ of 21 μM is equaled or exceeded by up to 7-fold (i.e. IC₅₀ = 3–21 μM) by several carboxylic acids [R = (CH₂)_nCO₂H (n = 0–3), (CH_2nOCH₂CO₂H (n = 1–3) and CH₂SCH₂ CO₂H] and their esters and two phosphonic acids (CH₂CH₂PO₃H₂ and CH₂OCH₂PO₃H₂) but not their esters. These carboxyl and phosphonic acids (and their salts) include the most potent water-soluble chloride channel blockers known. Conversion to the monosulfones increases activity of the R = H and CH₂OH analogs by 1.2- to 3-fold but decreases that of the R = CH₂CH₂CO₂R′ (R′ = H or CH₃) derivatives by 3- to 13-fold. Quantitative structure-activity analyses for 44 2-[4-(substituted-ethynyl)phenyl]-dithianes suggests that the principal feature of the R substituent for high activity is its polarizable volume modeled as molecular refractivity, i.e. this substituent is not a well-defined pharmacophore and undergoes a structurally non-specific interaction with the receptor. These observations lay the background for preparing candidate affinity probes.     

Effect of reaction temperature and reaction time on the preparation of low-molecular-weight chitosan using phosphoric acid

Low-molecular-weight chitosan were prepared using 85% phosphoric acid at different reaction temperatures and reaction time. At room temperature, the viscosity average-molecular weights (M_v) of chitosan decreased to 7.1×10⁴ from 21.4×10⁴ after 35 days treatment. The degradation rate decreased with increasing hydrolysis time. The yields of chitosan also continuously decreased from 68.4 to 40.2% after 35 days. At 40, 60 and 80 °C, the molecular weight decreased to 3.70×10⁴, 3.50×10⁴ and 2.00×10⁴ on 8 h hydrolysis, respectively. The yields of chitosan remain at a high level compared with that at room temperature and were 86.5, 71.4 and 61.3% at 40, 60 and 80 °C treatment, respectively. The different reaction time gave chitosan with different molecular weights. At 60 °C, the molecular weight of products decreased to 7.40×10⁴ from 21.4×10⁴ within 4 h, then decreased slowly to 1.90×10⁴ in 15 h. It was also found that the water-solubility of chitosan increased as the molecular weight decreased. Results show the changes in yields and molecular weight of chitooligomers were strongly dependent on the reaction temperature and reaction time.