MicroRNA-7 promotes neural differentiation of trabecular meshwork mesenchymal stem cell on nanofibrous scaffold

The purpose of this study was to investigate miR-7 overexpression effects on neural differentiation of mesenchymal stem cells (MSCs) on both two-dimensional (2D) and three-dimensional (3D) culture systems. We upregulated miR-7 through lentiviral vector in trabecular meshwork MSCs (TMMSCs) and polymers of poly l -lactic acid/polycaprolactone fibrous scaffold were fabricated by electrospinning and characterized using scanning electron microscopy (SEM) and Fourier transform infrared (FTIR). Neural markers expression was evaluated through quantitative-polymerase chain reaction (q-PCR) and immunostaining. The results showed that the high percentage of cell transduction (84.9%) and miR-7 expression (folds: 677.93 and 556.4) was detected in TMMSCs-miR-7(+). SEM and FTIR established the fabrication of the hybrid scaffold. q-PCR analysis showed that on days 14 and 21 of transduction, the expression level of Nestin and glial fibrillary acidic protein (GFAP) genes were significantly higher in the scaffold (3D) compared with tissue culture polystyrene (2D) culture. The expression of microtubule-associated protein-2 (MAP-2) and GFAP genes in TMMSCs-miR-7(+) cells were significantly higher than those miR-7(−) cells after 21 days of cell culture. Also, MAP-2 and Nestin proteins were detected in TMMSCs-miR-7(+) cells. Our results demonstrate that miR-7 is involved in neural differentiation of TMMSCs and scaffold can improve differentiate into glial and neural progenitor cells. These findings provided some information for future use of microRNAs and scaffold in tissue engineering and cell therapy for neurological diseases.     

Nanocomposite scaffold seeded with mesenchymal stem cells for bone repair

The mechanical property of bone tissue scaffolds is one of the most important aspects in bone tissue engineering that has remained problematic. In our previous study, we fabricated a three‐dimensional scaffold from nano‐hydroxyapatite/gelatin (nHA/Gel) and investigated its efficiency in promoting bone regeneration both in vitro and in vivo. In the present study, the effect of adding silicon carbide (SiC) on the mechanical and biological behaviors of the nHA/Gel/SiC and bone regeneration in vivo were determined. nHA and SiC were synthesized and characterized by the X‐ray diffraction pattern and transmission electron microscope image. Layer solvent casting, freeze drying, and lamination techniques were applied to prepare these scaffolds. Then, the biocompatibility and cell adhesion behavior of the synthesized nHA/Gel/SiC scaffolds were investigated. For in vivo studies, rats were categorized into three groups: blank defect, blank scaffold, and rat bone marrow mesenchymal stem cells (rBM‐MSCs)/scaffold. After 1, 4, and 12 weeks post‐injury, the rats were sacrificed and the calvaria were harvested. Sections with a thickness of 5 µm thickness were prepared and stained with hematoxylin–eosin and Masson's Trichrome, and immunohistochemistry was performed. Our results showed that SiC effectively increased the mechanical properties of the nHA/Gel/SiC scaffold. No significant differences were observed in biocompatibility, cell adhesion, and cytotoxicity of the nHA/Gel/SiC in comparison with the nHA/Gel nanocomposite. Based on histological and immunohistochemical studies, both osteogenesis and collagenization were significantly higher in the rBM‐MSCs/scaffold group, quantitatively and qualitatively. The present study strongly suggests the potential of SiC as an alternative strategy to improve the mechanical and biological properties of bone tissue engineering scaffolds, and shows that the pre‐seeded nHA/Gel/SiC scaffold with rBM‐MSCs improves osteogenesis in the engineered bone implant.     

Characterization of electrospun nanocomposite scaffolds and biocompatibility with adipose-derived human mesenchymal stem cells

Electrospun nanocomposite scaffolds were fabricated by encapsulating multi-walled carbon nanotubes (MWNT) in poly (lactic acid) (PLA) nanofibers. Scanning electron microscopy (SEM) confirmed the fabrication of nanofibers, and transmission electron microscopy identified the alignment and dispersion of MWNT along the axis of the fibers. Tensile testing showed an increase in the tensile modulus for a MWNT loading of 0.25 wt% compared with electrospun nanofibrous mats without MWNT reinforcement. Conductivity measurements indicated that the confined geometry of the fibrous system requires only minute doping to obtain significant enhancements at 0.32 wt%. Adipose-derived human mesenchymal stem cells (hMSCs) were seeded on electrospun scaffolds containing 1 wt% MWNT and 0 wt% MWNT, to determine the efficacy of the scaffolds for cell growth, and the effect of MWNT on hMSC viability and proliferation over two weeks in culture. Staining for live and dead cells and DNA quantification indicated that the hMSCs were alive and proliferating through day 14. SEM images of hMSCs at 14 days showed morphological differences, with hMSCs on PLA well spread and hMSCs on PLA with 1% MWNT closely packed and longitudinally aligned.     

Chondrogenic differentiation of human mesenchymal stem cells cultured in a cobweb-like biodegradable scaffold

Human mesenchymal stem cells (MSCs) were cultured in vitro in a cobweb-like biodegradable polymer scaffold: a poly(dl-lactic-co-glycolic acid)-collagen hybrid mesh in serum-free DMEM containing TGF-beta3 for 1-10 weeks. The cells adhered to the hybrid mesh, distributed evenly, and proliferated to fill the spaces in the scaffold. The ability of the cells to express gene encoding type I collagen decreased, whereas its ability to express type II collagen and aggrecan increased. Histological examination by HE staining indicated that the cells showed fibroblast morphology at the early stage and became round after culture for 4 weeks. The cartilaginous matrices were positively stained by safranin O and toluidine blue. Immunostaining with anti-type II collagen and anti-cartilage proteoglycan showed that type II collagen and cartilage proteoglycan were detected around the cells. In addition, a homogeneous distribution of cartilaginous extracellular matrices was detected around the cells. These results suggest the chondrogenic differentiation of the mesenchymal stem cells in the hybrid mesh. The PLGA-collagen hybrid mesh enabled the aggregation of mesenchymal stem cells and provided a promotive microenvironment for the chondrogenic differentiation of the MSCs.     

An activator of the cAMP/PKA/CREB pathway promotes osteogenesis from human mesenchymal stem cells

Mesenchymal stem cells (MSCs) are multipotent adult stem cells capable of differentiating along the osteoblast, adipocyte, and chondrocyte lineages. Regulation of MSCs differentiation may be a useful tool for regenerative medicine and cell‐based therapy. The discovery of small molecule that activates the osteogenic differentiation of MSCs could aid in the development of a new anabolic drug for osteoporosis treatment. We identified CW008, a derivative of pyrazole–pyridine, that stimulates osteoblast differentiation of human MSCs and increases bone formation in ovariectomized mice. CW008 promotes osteogenesis by activating cAMP/PKA/CREB signaling pathway and inhibiting leptin secretion. These results suggest that CW008 is an agonist of cAMP/PKA/CREB pathway in osteogenic differentiation and that application of CW008 may be useful for the treatment of bone‐related diseases and for the study of bone biology. J. Cell. Physiol. 228: 617–626, 2013. © 2012 Wiley Periodicals, Inc.     

Staphylococcal enterotoxin C2 promotes osteogenesis and suppresses osteoclastogenesis of human mesenchymal stem cells

As a super-antigen, staphylococcal enterotoxin C2 (SEC2) stimulates the release of massive inflammatory cytokines such as interferon-gamma (IFN-γ), interleukin-1 (IL-1) and interleukin-2 (IL-2) which are documented to implicate osteoblast differentiation. In the present study, SEC2 was found to significantly improve the osteoblast differentiation by up-regulating BMP2 and Runx2/Cbfa1 expression. Interferon (IFN)-inducible gene IFI16, a co-activator of Runx2/Cbfa1, was also activated by SEC2 in the osteoblast differentiation. In addition, exogenous introduction of SEC2 stimulated OPG expression and suppressed RANKL, suggesting suppression of osteoclastogenesis in hMSCs. Therefore, our results displayed that SEC2 plays an important role in the commitment of MSC to the osteoblast and it might be a potential new therapeutic candidate for bone regeneration.     

Nanofibrous nonmulberry silk/PVA scaffold for osteoinduction and osseointegration

Poly‐vinyl alcohol and nonmulberry tasar silk fibroin of Antheraea mylitta are blended to fabricate nanofibrous scaffolds for bone regeneration. Nanofibrous matrices are prepared by electrospinning the equal volume ratio blends of silk fibroin (2 and 4 wt%) with poly‐vinyl alcohol solution (10 wt%) and designated as 2SF/PVA and 4SF/PVA, respectively with average nanofiber diameters of 177 ± 13 nm (2SF/PVA) and 193 ± 17 nm (4SF/PVA). Fourier transform infrared spectroscopy confirms retention of the secondary structure of fibroin in blends indicating the structural stability of neo‐matrix. Both thermal stability and contact angle of the blends decrease with increasing fibroin percentage. Conversely, fibroin imparts mechanical stability to the blends; greater tensile strength is observed with increasing fibroin concentration. Blended scaffolds are biodegradable and support well the neo‐bone matrix synthesis by human osteoblast like cells. The findings indicate the potentiality of nanofibrous scaffolds of nonmulberry fibroin as bone scaffolding material. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 271–284, 2015.     

Encapsulation of adult human mesenchymal stem cells within collagen-agarose microenvironments

Reliable control over the process of cell differentiation is a major challenge in moving stem cell-based therapies forward. The composition of the extracellular matrix (ECM) is known to play an important role in modulating differentiation. We have developed a system to encapsulate adult human mesenchymal stem cells (hMSC) within spherical three-dimensional (3D) microenvironments consisting of a defined mixture of collagen Type I and agarose polymers. These protein-based beads were produced by emulsification of liquid hMSC-matrix suspensions in a silicone fluid phase and subsequent gelation to form hydrogel beads, which were collected by centrifugation and placed in culture. Bead size and size distribution could be varied by changing the encapsulation parameters (impeller speed and blade separation), and beads in the range of 30-150 microns in diameter were reliably produced. Collagen concentrations up to 40% (wt/wt) could be incorporated into the bead matrix. Visible light and fluorescence microscopy confirmed that the collagen matrix was uniformly distributed throughout the beads. Cell viability post-encapsulation was in the range of 75-90% for all bead formulations (similar to control slab gels) and remained at this level for 8 days in culture. Fluorescent staining of the actin cytoskeleton revealed that hMSC spreading increased with increasing collagen concentration. This system of producing 3D microenvironments of defined matrix composition therefore offers a way to control cell-matrix interactions and thereby guide hMSC differentiation. The bead format allows the use of small amounts of matrix proteins, and such beads can potentially be used as a cell delivery vehicle in tissue repair applications.     

Magnetoelectric nanocomposite scaffold for high yield differentiation of mesenchymal stem cells to neural-like cells

While the differentiation factors have been widely used to differentiate mesenchymal stem cells (MSCs) into various cell types, they can cause harm at the same time. Therefore, it is beneficial to propose methods to differentiate MSCs without factors. Herein, magnetoelectric (ME) nanofibers were synthesized as the scaffold for the growth of MSCs and their differentiation into neural cells without factors. This nanocomposite takes the advantage of the synergies of the magnetostrictive filler, CoFe₂O ₄ nanoparticles (CFO), and piezoelectric polymer, polyvinylidene difluoride (PVDF). Graphene oxide nanosheets were decorated with CFO nanoparticles for a proper dispersion in the polymer through a hydrothermal process. After that, the piezoelectric PVDF polymer, which contained the magnetic nanoparticles, underwent the electrospun process to form ME nanofibers, the ME property of which has the potential to be used in areas such as tissue engineering, biosensors, and actuators.     

Adipose-derived stem cells alleviate osteoporosis by enchancing osteogenesis and inhibiting adipogenesis in a rabbit model

Background aimsOsteoporosis (OP) is characterized by a reduction in bone quality, which is associated with inadequacies in bone marrow mesenchymal stromal cells (BMSCs). As an alternative cell source to BMSCs, adipose-derived stem cells (ASCs) have been investigated for bone repair because of their osteogenic potential and self-renewal capability. Nevertheless, whether autologous ASCs can be used to promote bone regeneration under osteoporotic conditions has not been elucidated.MethodsThe OP rabbit model was established by means of bilateral ovariectomy (OVX). Both BMSCs and ASCs were harvested from OVX rabbits and expanded in vitro. The effects of osteogenic-induced ASCs on the in vitro adipogenic and osteogenic capabilities of BMSCs were evaluated. Autologous ASCs were then encapsulated by calcium alginate gel and transplanted into the distal femurs of OVX rabbits (n = 12). Hydrogel without loading cells was injected into the contralateral femurs as a control. Animals were killed for investigation at 12 weeks after transplantation.ResultsOsteogenic-induced ASCs were able to promote osteogenesis and inhibit adipogenesis of osteoporotic BMSCs through activation of the bone morphogenetic protein 2/bone morphogenetic protein receptor type IB signal pathway. Local bone mineral density began to increase at 8 weeks after ASC transplantation (P < 0.05). At 12 weeks, micro–computed tomography and histological evaluation revealed more new bone formation in the cell-treated femurs than in the control group (P < 0.05).ConclusionsThis study demonstrated that ASCs could stimulate proliferation and osteogenic differentiation of BMSCs in vitro and enhance bone regeneration in vivo, which suggests that autologous osteogenic-induced ASCs might be useful to alleviate OP temporally.     

Oncostatin M promotes osteogenesis and suppresses adipogenic differentiation of human adipose tissue-derived mesenchymal stem cells

Oncostatin M (OSM) is a multifunctional cytokine of the interleukin-6 family and has been implicated in embryonic development, differentiation, inflammation, and regeneration of liver and bone. In the present study, we demonstrated that treatment of human adipose mesenchymal stem cells (hADSCs) with OSM-attenuated adipogenic differentiation, as indicated by decreased accumulation of intracellular lipid droplets and down-regulated expression of adipocytic markers, such as lipoprotein lipase and PPARgamma. However, OSM treatment stimulated osteogenic differentiation, as demonstrated by the increase in matrix mineralization and expression levels of osteogenic differentiation markers, including alkaline phosphatase, Runx2, and osteocalcin. OSM treatment induced activation of JAK2, JAK3, and ERK in hADSCs, and pre-treatment of hADSCs with the JAK2 inhibitor, AG490, significantly restored the OSM-induced inhibition of adipogenic differentiation. Whereas, the JAK3 inhibitor, WHI-P131, and the MEK inhibitor, U0126, had no effects on the anti-adipogenic activity of OSM. On the other hand, the pro-osteogenic activity of OSM was prevented by treatment of the cells with WHI-P131 or U0126, but not with AG490. These results indicate that distinct signaling pathways, including JAK2, JAK3, and MEK-ERK, play specific roles in the OSM-induced anti-adipogenic and pro-osteogenic differentiation of hADSCs.     

Salvianolic acid B promotes osteogenesis of human mesenchymal stem cells through activating ERK signaling pathway

Salvianolic acid B, a major bioactive component of Chinese medicine herb, Salvia miltiorrhiza, is widely used for treatment of cardiovascular diseases. Our recent studies have shown that Salvianolic acid B can prevent development of osteoporosis. However, the underlying mechanisms are still not clarified clearly. In the present study, we aim to investigate the effects of Salvianolic acid B on viability and osteogenic differentiation of human mesenchymal stem cells (hMSCs). The results showed Salvianolic acid B (Sal B) had no obvious toxic effects on hMSCs, whereas Sal B supplementation (5 μM) increased the alkaline phosphatase activity, osteopontin, Runx2 and osterix expression in hMSCs. Under osteogenic induction condition, Sal B (5 μM) significantly promoted mineralization; and when the extracellular-signal-regulated kinases signaling (ERK) pathway was blocked, the anabolic effects of Sal B were diminished, indicating that Sal B promoted osteogenesis of hMSCs through activating ERK signaling pathway. The current study confirms that Sal B promotes osteogenesis of hMSCs with no cytotoxicity, and it may be used as a potential therapeutic agent for the management of osteoporosis.     

Comparative evaluation of morphology and osteogenic behavior of human Wharton's jelly mesenchymal stem cells on 2D culture plate and 3D biomimetic scaffold

Expansion of seeded human Wharton's jelly mesenchymal stem cells (hWJ-MSCs) on 2D culture plates and 3D nano-hydroxyapatite/chitosan/gelatin scaffolds, from morphology and osteoactivity points of view, were investigated. Cell attachment and spreading, temporal expression profiles of selected osteogenic gene and protein markers, intracellular alkaline phosphatase enzyme activity (ALP activity), and matrix mineralization were assayed over the course of the experiments. Morphological results demonstrated hWJ-MSCs had greater affinity to adhere onto the 3D scaffold surface, as the number and thickness of the filopodia were higher in the 3D compared with 2D culture system. Functionally, the intracellular ALP activity and extracellular mineralization in 3D scaffolds were significantly greater, in parallel with elevation of osteogenic markers at the mRNA and protein levels at all-time point. It is concluded that 3D scaffolds, more so than 2D culture plate, promote morphology and osteogenic behavior of WJ-MSCs in vitro, a promising system for MSCs expansion without compromising their stemness before clinical transplantation.     

Structured three-dimensional co-culture of mesenchymal stem cells with meniscus cells promotes meniscal phenotype without hypertrophy

Menisci play a crucial role in weight distribution, load bearing, shock absorption, lubrication, and nutrition of articular cartilage within the knee joint. Damage to the meniscus typically does not heal spontaneously due to its partial avascular nature. Partial or complete meniscectomy is a common clinical treatment of the defective meniscus. However, this procedure ultimately leads to osteoarthritis due to increased mechanical stress to the articular cartilage. Meniscus tissue engineering offers a promising solution for partial or complete meniscus deficiency. Mesenchymal stem cells (MSC) have the potential to differentiate into meniscal fibrochondrocyte as well as deliver trophic effects to the differentiated cells. This study tested the feasibility of using MSC co-cultured with mature meniscal cells (MC) for meniscus tissue engineering. Structured cell pellets were created using MC and MSC at varying ratios (100:0, 75:25, 50:50, 25:75, and 0:100) and cultured with or without transforming growth factor-beta 3 supplemented chondrogenic media for 21 days. The meniscal and hypertrophic gene expression, gross appearance and structure of the pellets, meniscus extracellular matrix (ECM), histology and immunohistochemistry of proteoglycan and collagen were evaluated. Co-culture of MC with MSC at 75:25 demonstrated highest levels of collagen type I and glycosaminoglycans (GAG) production, as well as the lowest levels of hypertrophic genes, such as COL10A1 and MMP13. All co-culture conditions showed better meniscus ECM production and hypertrophic inhibition as compared to MSC culture alone. The collagen fiber bundles observed in the co-cultures are important to produce heterogenic ECM structure of meniscus. In conclusion, co-culturing MC and MSC is a feasible and efficient approach to engineer meniscus tissue with enhanced ECM production without hypertrophy.