Stabilization of poly-L-lysine/DNA polyplexes for in vivo gene delivery to the liver

We are developing a self-assembling non-viral in vivo gene delivery vehicle based on poly-l-lysine and plasmid DNA. We have characterized poly-l-lysines of different chain lengths for DNA condensation and strength of DNA binding. Poly-l-lysine chains >20 residues bound DNA efficiently in physiological saline, while shorter chains did not. Attachment of asialoorosomucoid to PLL increased the PLL chain length required for efficient DNA binding in saline and for efficient DNA condensation. By electron microscopy, poly-l-lysine/DNA polyplexes appeared as toroids 25-50 nm in diameter or rods 40-80 nm long; conjugation of asialoorosomucoid to the polylysine component increased the size of resulting polyplexes to 50-90 nm. In water, poly-l-lysine and asialoorosomucoid-PLL polyplexes have effective diameters of 46 and 87.6 nm, respectively. Polyplexes containing only poly-l-lysine and DNA aggregated in physiological saline at all charge ratios and aggregated at neutral charge ratios in water. Attachment of asialoorosomucoid lessened, but did not eliminate, the aggregation of PLL polyplexes, and did not result in efficient delivery of polyplexes to hepatocytes. Conjugation of polyethylene glycol to poly-l-lysine sterically stabilized resulting polyplexes at neutral charge ratios by shielding the surfaces. For efficient in vivo gene delivery, polyplexes will need to be sterically stabilized to prevent aggregation and interaction with serum components.     

Formulation of a microparticle carrier for oral polyplex-based DNA vaccines

Oral induction of a disseminated mucosal immune response with polyplex-based DNA vaccines requires the delivery of intact polyplexes (polyelectrolyte complexes formed by self-assembly of plasmid DNA with a cationic polymer) to subepithelial lymphoid tissue (e.g. Peyer's patches) within the gastrointestinal tract. This work describes the formulation of a microparticle polyplex carrier allowing the potential of this approach to be realised. PEGylated PEI/DNA polyplexes (DNA concentration 20 microg/ml) formed at N/P 5:0 (defined as the ratio of polycation amino groups to DNA phosphates) were stable to salt-induced aggregation and could be concentrated to a final DNA concentration of 1 mg/ml without polyplex size increase. Polyplexes containing 1:1 polyethylene glycol (PEG)/polyethylenimine (PEI) ratio (mass/mass) gave similar levels of luciferase gene expression in B16F10 cells compared to non-PEG complexes. Poly-(D,L-lactide-co-glycolide) (PLGA) microparticles containing PEGylated polyplexes (approximately 17% DNA encapsulation efficiency) were formulated using a modified double emulsion solvent evaporation method. The microencapsulation and release of intact polyplexes from the microparticle carrier was demonstrated using polyanion (heparin sulfate and poly(aspartic acid) (PAA)) displacement techniques and electron microscopy. Microparticles containing PEGylated polyplexes (24 microg beta-galactosidase DNA) were given orally to Wistar rats. Significant transgene expression (compared to background) was found in peripheral tissue (spleen) 72 h after administration. This work demonstrates the potential application of microparticle carriers for mucosal polyplex-based vaccination.     

Monitoring DNA/poly-L-lysine polyplex formation with time-resolved multiangle laser light scattering

Nonviral DNA complexes show promise as alternative and attractive gene delivery vectors for treating genetic diseases. Nonviral DNA complexes are typically formed by combining DNA with various condensing/complexing agents such as lipids, polyelectrolytes, polymers, polypeptides, and surfactants in solution. DNA/poly-L-lysine polyplex formation kinetics are probed by time-resolved multiangle laser light scattering (TR-MALLS), which yields the time evolution of the supramolecular complex mass and geometric size. Primary polyplexes whose geometric size is smaller than individual DNA molecules in solution are formed very rapidly upon mixing DNA and poly-L-lysine. Over time, these primary polyplexes aggregate into larger structures whose ultimate size is determined primarily by the relative concentrations of DNA and poly-L-lysine. This final polyplex size varies with the DNA/poly-L-lysine mass ratio in a non-monotonic fashion, with the maximum polyplex size occurring at a DNA/poly-L-lysine mass ratio of approximately two to three (charge ratio near unity). The utility of TR-MALLS for monitoring the temporal evolution of DNA loading and supramolecular complex size growth (mean square radius and molar mass) throughout the DNA/poly-L-lysine polyplex formation process is demonstrated. The polyplex DNA loading and size, both geometric and molar mass, are key to understanding the transfection process and for developing optimal gene therapy vectors.     

PEGylation of poly(ethylene imine) affects stability of complexes with plasmid DNA under in vivo conditions in a dose-dependent manner after intravenous injection into mice

The influence of PEGylation on polyplex stability from poly(ethylene imine), PEI, and plasmid DNA was investigated both in vitro and after intravenous administration in mice. Polyplexes were characterized with respect to particle size (dynamic light scattering), zeta-potential (laser Doppler anemometry), and morphology (atomic force microscopy). Pharmacokinetics and organ accumulation of both polymers and pDNA were investigated using 125I and 32P radioactive labels, respectively. Furthermore gene expression patterns after 48 h were measured in mice. To elucidate the effect of different doses, all experiments were performed using ca. 1.5 microg and 25 microg of pDNA per mouse. Our studies demonstrated that both PEI and PEG-PEI form stable polyplexes with DNA with similar sizes of 100-130 nm. The zeta potential of PEI/pDNA polyplexes was highly positive, whereas PEG-PEI/pDNA showed a neutral surface charge as expected. The pharmacokinetic and organ distribution profiles after 2 h show similarities for both PEI and pDNA blood-level time curves from polyplexes at both doses indicative for significant stability in the bloodstream. A very rapid clearance from the bloodstream was observed and as major organs of accumulation liver and spleen were identified. PEG-PEI/pDNA complexes at a dose of approximately 25 microg exhibit similar profiles except a significantly lower deposition in the lung. At the lower dose of approximately 1.5 microg pDNA, however, for polyplexes from PEG-PEI, significant differences in blood level curves and organ accumulation of polymer and pDNA were found. In this case PEG-PEI shows a greatly enhanced circulation time in the bloodstream. By contrast, pDNA was rapidly cleared from circulation and significant amounts of radioactivity were found in the urine, suggesting a rapid degradation possibly by serum nucleases after complex separation. Regarding in vivo gene expression, no luciferase expression could be detected at approximately 1.5 microg dose in any organ using both types of complexes. At 25 microg only in the case of PEI/pDNA complexes were significant levels of the reporter gene detected in lung, liver, and spleen. This coincided with high initial accumulation of pDNA complexed with PEI and a high acute in vivo toxicity. For PEG-PEI, initial accumulation was much lower and no gene expression as well as a low acute toxicity was found. In summary, our data demonstrate that PEG-PEI used in this study is not suitable for low dose gene delivery. At a higher dose of approximately 25 microg, however, polyplex stability is similar to PEI/pDNA combined with a more favorable organ deposition and significantly lower acute in vivo toxicity. These findings have consequences for the design of PEG-PEI-based gene delivery systems for in vivo application.     

An acid-labile block copolymer of PDMAEMA and PEG as potential carrier for intelligent gene delivery systems

Intelligent gene delivery systems based on physiologically triggered reversible shielding technology have evinced enormous interest due to their potential in vivo applications. In the present work, an acid-labile block copolymer consisting of poly(ethylene glycol) and poly(2-(dimethylamino)ethyl methacrylate) segments connected through a cyclic ortho ester linkage (PEG- a-PDMAEMA) was synthesized by atom transfer radical polymerization of DMAEMA using a PEG macroinitiator with an acid-cleavable end group. PEG- a-PDMAEMA condensed with plasmid DNA formed polyplex nanoparticles with an acid-triggered reversible PEG shield. The pH-dependent shielding/deshielding effect of PEG chains on the polyplex particles were evaluated by zeta potential and size measurements. At pH 7.4, polyplexes generated from PEG- a-PDMAEMA exhibited smaller particle size, lower surface charge, reduced interaction with erythrocytes, and less cytotoxicity compared to PDMAEMA-derived polyplexes. At pH 5.0, zeta potential of polyplexes formed from PEG- a-PDMAEMA increased, leveled up after 2 h of incubation and gradual aggregation occurred in the presence of bovine serum albumin (BSA). In contrast, the stably shielded polyplexes formed by DNA and an acid-stable block copolymer, PEG- b-PDMAEMA, did not change in size and zeta potential in 6 h. In vitro transfection efficiency of the acid-labile copolymer greatly increased after 6 h incubation at pH 5.0, approaching the same level of PDMAEMA, whereas there was only slight increase in efficiency for the stable copolymer, PEG- b-PDMAEMA.     

DNA-polycation complexation and polyplex stability in the presence of competing polyanions

Polyelectrolyte complex (polyplex) formation was studied by employing tapping mode atomic force microscopy (AFM) and an ethidium bromide fluorescence assay. The polycations chitosan and poly-L-lysine were used to compact DNA and the stability of the polyplexes was evaluated upon exposure to competing polyanions (alginate and xanthan). Furthermore, the relative preference of these polycations for DNA and the competing polyanion was investigated. The results showed that neither poly-L-lysine nor chitosan displayed any selectivity in binding to DNA relative to the competing polyanions, demonstrating the importance of electrostatics in the binding of a polycation to a polyanion. However, the ability of the polyanions to destabilize the DNA-polycation complexes depended on both the polyanion and the polycation employed, indicating that polymer-specific properties are also important for the complexation behavior and polyplex stability. Destabilization experiments further showed that annealing yielded complexes that were less prone to disruption upon subsequent exposure to alginate. Annealing experiments of plasmid DNA-chitosan complexes showed an increased fraction of rods following temperature treatment, indicating that the rods most likely are the more stable morphology for this system.     

Polyplexes assembled with internally quaternized PAMAM-OH dendrimer and plasmid DNA have a neutral surface and gene delivery potency

Interior tertiary amine groups of PAMAM-OH dendrimers (hydroxyl-terminated polyamidoamine, PAMAM) were modified by methylation to make these polymers have a more cationic character, which enabled electrostatic interaction between PAMAM-OH and plasmid DNA. A methylation reaction was dose-dependent, producing internally quaternized PAMAM-OH (QPAMAM-OH), thereby making tertiary amine/quaternary amine ratio adjustment possible. More highly condensed particles of plasmid DNA were formed as the degree of quaternization increased, whereas unmodified polymer (PAMAM-OH) could not. The location of positive charges in the internal position of QPAMAM-OH resulted in the formation of neutral polyplexes in which zeta potential leveled off near the zero value even at high charge ratios (+/-) of 10. A light scattering experiment showed that the polyplex formed by QPAMAM-OH was very small with the size of 53.3 nm at the optimum condition. QPAMAM-OH/DNA polyplexes were round-shaped with the more compact and small particles formed as the charge ratio increased. QPAMAM-OH showed much reduced cytotoxicity compared with starburst PAMAM and branched polyethyleneimine (PEI) in which shielding of interior positive charges by surface hydroxyls might be the reason for this favorable result. These results suggest that QPAMAM-OH could be a promising tool as a nonviral vector both by itself and in conjugated form with targeting ligands.     

Physiochemical properties of low and high molecular weight poly(ethylene glycol)-grafted poly(ethylene imine) copolymers and their complexes with oligonucleotides

Inefficient delivery of antisense oligonucleotides (AOs) to target cell nuclei remains as the foremost limitation to their usefulness. Copolymers of cationic poly(ethylene imine) (PEI) and poly(ethylene glycol) (PEG) have been well-studied for delivery of plasmids. However, the properties of PEG-PEI-AO polyplexes have not been comprehensively investigated. Therefore, we synthesized a series of PEG-PEI copolymers and evaluated their physiochemical properties alone and when complexed with AO. The M(w) of PEG was found to be the main determinant of polyplex size, via its influence on particle aggregation. DLS measurements showed that when PEG5000 was grafted to PEI2K and PEI25K, polyplex diameters were extremely small (range 10-90 nm) with minimal aggregation. In contrast, when PEG550 was grafted to PEI2K and PEI25K, polyplexes appeared as much larger aggregates (approximately 250 nm). As expected, the surface charge (zeta potential) was higher for polyplexes containing PEI25K than those containing PEI2K, but decreased with increased levels of PEG grafting. Surprisingly, within the physiological range (pH 7.5-5), the buffering capacity of all copolymers was nearly equivalent to that of unsubstituted PEI2K or PEI25K, and was barely influenced by PEGylation. The stability of polyplexes was evaluated using a heparin polyanion competition assay. Unexpectedly, polyplexes containing PEI2K showed stability equal to or greater than that of PEI25K polyplexes. The level of PEG grafting also had a dramatic effect on polyplex stability. The relationships established between molecular formulations and polyplex size, aggregation, surface charge, and stability should provide a useful guide for future studies aimed at optimizing polymer-mediated AO delivery in cell and animal studies. A summary of the relationships between polyplex structures and recent studies of their transfection capacity is provided.     

Nanostructure of polyplexes formed between cationic diblock copolymer and antisense oligodeoxynucleotide and its influence on cell transfection efficiency

Although various cationic polymers have been used to condense anionically charged DNA to improve their transfection efficiency, there is still a lack of fundamental understanding about how to control the nanostructure and charge of the polyplexes formed and how to relate such information to cell transfection efficiency. In this work, we have synthesized a weak cationic and phosphorylcholine-containing diblock copolymer and used it as a model vector to deliver an antisense oligodeoxynucleotide (ODN) into HeLa cells. Small angle neutron scattering (SANS) was used to determine the copolymer/ODN polyplex structure. The SANS data revealed the formation of polyplex nanocylinders at high copolymer (N)/ODN (P) charge ratios, where N symbolizes the amine groups on the copolymer and P symbolizes the phosphate groups. However, the cylindrical lengths remained constant, indicating that the ODN binding over this region did not alter the cylindrical shape of the copolymer in solution. As the N/P ratio decreased and became close to unity the polyplex diameters remained constant, but their lengths increased substantially, suggesting the end-to-end bridging by ODN binding between copolymer cylinders. As the N/P ratios went below unity (with ODN in excess), the polyplex diameters increased substantially, indicating different ODN bridging to bundle the small polyplexes together. Transfection studies from HeLa cells indicated a steady increase in transfection efficiency with increasing cationic charge and decreasing polyplex size. Cell growth inhibition assay showed significant growth inhibition by the polyplexes coupled with weak cytotoxicity, indicating effective ODN delivery. While this study has confirmed the overall charge effect, it has also revealed progressive structural changes of the polyplexes against varying charge ratio, thereby providing useful insight into the mechanistic process behind the ODN delivery.     

Enhanced resistance to nuclease degradation of nucleic acids complexed to asialoglycoprotein-polylysine carriers.

We have previously shown targeting of DNA to hepatocytes using an asialoorosomucoid-polylysine (AsOR-PL) carrier system. The AsOR-PL conjugate condenses DNA and facilitates entry via specific receptor-ligand interactions. In these studies, our objective was to determine if AsOR-PL conjugates protect bound DNA from nuclease attack. Double-stranded plasmid or single-stranded oligonucleotide DNA, alone or bound to conjugate, was incubated under conditions mimicking those encountered during in vitro and in vivo transfections. The results showed that complexed DNA was effectively protected from degradation by serum nucleases. Degradation of single-stranded oligonucleotides was inhibited 3- to 6-fold in serum during 5 hours of incubation. For complexed plasmids, greater than 90% remained full-length during 1.5 and 3 hour incubations in serum or culture medium containing 10% serum, respectively. Uncomplexed plasmid was completely degraded after 15 minutes in serum or 60 minutes in medium. In cell lysates, the conjugate was not effective in inhibiting endonuclease activity; plasmids were readily converted from supercoiled to open circular and linear forms. However, the resultant nicked forms were substantially protected from further degradation during one hour of incubation compared to plasmid alone. Under all conditions complexed DNA did not readily dissociate from the conjugate. Overall, for both single and double-stranded DNA, AsOR-PL conjugates conferred substantial protection from nuclease degradation.     

Stabilized nanocarriers for plasmids based upon cross-linked poly(ethylene imine)

Stabilized PEI/DNA polyplexes were generated by cross-linking PEI with biodegradable disulfide bonds. The reaction conversion of different PEIs with the amine reactive cross-linker dithiobis(succinimidyl propionate) (DSP) was investigated, and the molecular weight of the reaction products was identified. Light scattering and microelectrophoresis were employed to assess size and zeta potential of the resulting polyplexes. Polyplex morphology and mechanic stability were investigated using atomic force microscopy. Finally, albumin and erythrocyte interactions and stability against polyanions and high ionic strength were checked. Polyplexes of PEI and DNA were prepared by two different formulation methods, either using pre-cross-linked polymers or by cross-linking polyplexes after complexation. Only the latter method yielded small (100-300 nm) polyplexes with a positive zeta potential when HMW PEI was used, whereas cross-linked LMW PEI resulted in polyplexes with increased size (>1000 nm) and zeta potentials down to -20 mV. In addition, only cross-linking after polyplex formation was able to enhance resistance against polyanion exchange and high ionic strength. AFM images revealed no changes in the morphology of cross-linked HWM PEI polyplexes, and indentation force measurements using AFM significantly increased mechanical stability of cross-linked HMW PEI polyplexes. These polyplexes also displayed significantly reduced interactions with major blood components like albumin and erythrocytes. The resulting biocompatible particles offer a means of combining enhanced polyplex stability with redox-triggered activation for in vivo application.     

Neuron-specific delivery of nucleic acids mediated by Tet1-modified poly(ethylenimine)

BACKGROUND: The development of minimally invasive, non-viral gene delivery vehicles for the central nervous system (CNS) is an important technology goal in the advancement of molecular therapies for neurological diseases. One approach is to deliver materials peripherally that are recognized and retrogradely transported by motor neurons toward the CNS. Tet1 is a peptide identified by Boulis and coworkers to possess the binding characteristics of tetanus toxin, which interacts specifically with motor neurons and undergoes fast, retrograde delivery to cell soma. In this work, Tet1-poly(ethylenimine) (Tet1-PEI) was synthesized and evaluated as a neurontargeted delivery vehicle. METHODS: Tet1-PEI and NT-PEI (neurotensin-PEI) were synthesized and complexed with plasmid DNA to form polyplexes. Polyplexes were assessed for binding and uptake in differentiated neuron-like PC-12 cells by flow cytometry and confocal microscopy. In order to determine gene delivery efficiency, polyplexes were exposed to PC-12 cells at various stages of differentiation. Targeted binding of polyplexes with primary neurons was studied using dorsal root ganglion cells. RESULTS: Tet1-PEI and NT-PEI polyplexes bound specifically to differentiated PC-12 cells. The specificity of the interaction was confirmed by delivery to non-neuronal cells and by competition studies with free ligands. Tet1-PEI polyplexes preferentially transfected PC-12 cells undergoing NGF-induced differentiation. Finally, neuron-specific binding of Tet1-PEI polyplexes was confirmed in primary neurons. CONCLUSIONS: These studies demonstrate the potential of Tet1-PEI as a neuron-targeted material for non-invasive CNS delivery. Tet1-PEI binds specifically and is internalized by neuron-like PC-12 cells and primary dorsal root ganglion. Future work will include evaluation of siRNA delivery with these vectors.     

A mechanistic dissection of polyethylenimine mediated transfection of CHO cells: To enhance the efficiency of recombinant DNA utilization

In this study, we examine the molecular and cellular interactions that underpin efficient internalization and utilization of polyethylenimine (PEI):DNA complexes (polyplexes) by Chinese Hamster Ovary (CHO) cells. Cell surface polyplex binding and internalization was a biphasic process, consisting of an initial rapid Phase (I), lasting approximately 15 min, followed by a slower second Phase (II), saturating at approximately 240 min post transfection. The second Phase accounted for the majority (60–70%) of polyplex internalization. While cell surface heparan sulphate proteoglycans (HSPGs) were rapidly cointernalized with polyplexes during Phase I, cell surface polyplex binding was not dependent on HSPGs. However, Phase II polyplex internalization and HSPG regeneration onto the surface of trypsinized cells occurred at similar rates, suggesting that the rate of recycling of HSPG‐containing membrane to the plasma membrane limits Phase II internalization rate. Under optimal transfection conditions, polyplexes had a near neutral surface charge (zeta potential) and cell surface binding was dependent on hydrophobic interactions, being significantly inhibited by both chemical sequestration of cholesterol from the plasma membrane and addition of nonionic surfactant. Induced alterations in polyplex zeta potential, using ferric (III) citrate to decrease surface charge and varying PEI:DNA ratio to increase surface charge, served to inhibit polyplex binding or reduce secreted alkaline phosphatase reporter expression and cell viability, respectively. To increase polyplex hydrophobicity and internalization an alkylated derivative of PEI, propyl‐PEI, was chemically synthesized. Using Design of Experiments–Response Surface Modeling to optimize the transfection process, the function of propyl‐PEI was compared to that of unmodified PEI in both parental CHO‐S cells and a subclone (Clone 4), which exhibited superior transgene expression via an increased resistance to polyplex cytotoxicity. The combination of propyl‐PEI and Clone 4 doubled the efficiency of recombinant DNA utilization and reporter protein production. These data show that for maximal efficacy, strategies to increase polyplex internalization into cells must be used in concert with strategies to offset the inherent cytotoxicity of this process. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1161–1170, 2014     

Low molecular weight linear polyethylenimine-b-poly(ethylene glycol)-b-polyethylenimine triblock copolymers: synthesis, characterization, and in vitro gene transfer properties

Novel ABA triblock copolymers consisting of low molecular weight linear polyethylenimine (PEI) as the A block and poly(ethylene glycol) (PEG) as the B block were prepared and evaluated as polymeric transfectant. The cationic polymerization of 2-methyl-2-oxazoline (MeOZO) using PEG-bis(tosylate) as a macroinitiator followed by acid hydrolysis afforded linear PEI-PEG-PEI triblock copolymers with controlled compositions. Two copolymers, PEI-PEG-PEI 2100-3400-2100 and 4000-3400-4000, were synthesized. Both copolymers were shown to interact with and condense plasmid DNA effectively to give polymer/DNA complexes (polyplexes) of small sizes (<100 nm) and moderate zeta-potentials (approximately +10 mV) at polymer/plasmid weight ratios > or =1.5/1. These polyplexes were able to efficiently transfect COS-7 cells and primary bovine endothelial cells (BAECs) in vitro. For example, PEI-PEG-PEI 4000-3400-4000 based polyplexes showed a transfection efficiency comparable to polyplexes of branched PEI 25000. The transfection activity of polyplexes of PEI-PEG-PEI 4000-3400-4000 in BAECs using luciferase as a reporter gene was 3-fold higher than that for linear PEI 25000/DNA formulations. Importantly, the presence of serum in the transfection medium had no inhibitive effect on the transfection activity of the PEI-PEG-PEI polyplexes. These PEI-PEG-PEI triblock copolymers displayed also an improved safety profile in comparison with high molecular weight PEIs, since the cytotoxicity of the polyplex formulations was very low under conditions where high transgene expression was found. Therefore, linear PEI-PEG-PEI triblock copolymers are an attractive novel class of nonviral gene delivery systems.     

Development of a nonviral gene delivery vehicle for systemic application

Polycation vehicles used for in vitro gene delivery require alteration for successful application in vivo. Modification of polycations by direct grafting of additional components, e.g., poly(ethylene glycol) (PEG), either before or after DNA complexation, tend to interfere with polymer/DNA binding interactions; this is a particular problem for short polycations such as linear, beta-cyclodextrin-containing polycations (betaCDPs). Here, a new method of betaCDP polyplex (polycation/DNA composite structures) modification is presented that exploits the ability to form inclusion complexes between cyclodextrins and adamantane. Surface-PEGylated betaCDP polyplexes are formed by self-assembly of the polyplexes with adamantane-PEG conjugates. While unmodified polyplexes rapidly aggregate and precipitate in salt solutions, the PEGylated betaCDP polyplexes are stable at conditions of physiological salt concentration. Addition of targeting ligands to the adamantane-PEG conjugates allows for receptor-mediated delivery; galactosylated betaCDP-based particles reveal selective targeting to hepatocytes via the asialoglycoprotein receptor. Galactosylated particles transfect hepatoma cells with 10-fold higher efficiency than glucosylated particles (control), but show no preferential transfection in a cell line lacking the asialoglycoprotein receptor. Thus, surface modification of betaCDP-based polyplexes through the use of cyclodextrin/adamantane host/guest interactions endows the particles with properties appropriate for systemic application.     

Influence of polyethylene glycol chain length on the physicochemical and biological properties of poly(ethylene imine)-graft-poly(ethylene glycol) block copolymer/SiRNA polyplexes

Polyplexes between siRNA and poly(ethylene imine) (PEI) derivatives are promising nonviral carriers for siRNA. The polyplex stability is of critical importance for efficient siRNA delivery to the cytoplasm. Here, we investigate the effect of PEGylation at a constant ratio ( approximately 50%) on the biophysical properties of the polyplexes. Particle size, zeta potential, and stability against heparin as well as RNase digestion and reporter gene knockdown under in vitro conditions of different siRNA polyplexes were characterized. Stability and size of siRNA polyplexes were clearly influenced by PEI-PEG structure, and high degrees of substitution such as PEI(25k)-g-PEG(550)(30) resulted in large (300-400 nm), diffuse complexes (AFM) which showed condensation behavior only at high N/P ratios. All other polyplexes and the PEI control showed similar sizes (150 nm) and compact structures in AFM, with complete condensation reached at N/P ratio of 3. Stability of siRNA polyplexes against heparin displacement and RNase digestion could be modified by PEGylation. Protection against RNase digestion was highest for PEI(25k)-g-PEG(5k)(4) and PEI(25k)-g-PEG(20k)(1), while siRNA/PEI provided insufficient protection. In knockdown experiments using NIH/3T3 fibroblasts stably expressing beta-galactosidase, it was shown that PEG chain length had a significant influence on biological activity of siRNA. Polyplexes with siRNA containing PEI(25k)-g-PEG(5k)(4) and PEI(25k)-g-PEG(20k)(1) yielded similar efficiencies of ca. 70% knockdown as lipofectamine controls. Confocal microscopy demonstrated enhanced cellular uptake of siRNA into cytosol by polyplexes formation with PEI copolymers. In conclusion, both the chain length and graft density of PEG were found to strongly influence siRNA condensation and stability and hence affect the knockdown efficiency of PEI-PEG/siRNA polyplexes.     

Structural analysis of chitosan mediated DNA condensation by AFM: influence of chitosan molecular parameters

Chitosan is a nontoxic and biodegradable polysaccharide that has recently emerged as a promising candidate for gene delivery. Here the ability of various chitosans, differing in the fractional content of acetylated units (F(A)) and the degree of polymerization (DP), to compact DNA was studied. Polyplexes made from mixing plasmid DNA with chitosan yielded a blend of toroids and rods, as observed by AFM. The ratios between the fractions of toroids and rods were observed to decrease with increasing F(A) of the chitosan, indicating that the charge density of chitosan, proportional to (1 - F(A)), is important in determining the shape of the compacted DNA. The amount of chitosan required to fully compact DNA into well-defined toroidal and rodlike structures were found to be strongly dependent on the chitosan molecular weight, and thus its total charge. A higher charge ratio (+/-) was needed for the shorter chitosans, showing that an increased concentration of the low DP chitosan could compensate for the reduced interaction strength of the individual ligands with DNA. Employing chitosans with different molecular parameters offers the possibility of designing DNA-chitosan polyplexes with various geometries, reflecting various chitosan-DNA interaction strengths, which is necessary for the evaluation of efficient gene delivery vehicles.     

Structure-activity examination of poly(glycoamidoguanidine)s: glycopolycations containing guanidine units for nucleic acid delivery

In this study we synthesized a new series of polymers known as poly(glycoamidoguanidine)s (PGAGs). These new polymer structures were synthesized by copolymerizing a carbohydrate monomer (diester; galatarate or tartarate) with a diamine incorporating guanidine or methylguanidine as a charge center to create a polyamide backbone. These materials were strategically designed and compared to our previously studied DNA delivery vehicles, poly(glycoamidoamine)s (PGAAs), which contain secondary amines as the charge groups along the polymer backbone to examine the effect of charge center type on the cellular delivery efficiency of plasmid DNA (pDNA). The guanidine moieties within the PGAGs facilitate electrostatic binding with the negatively charged phosphate backbone of plasmid DNA (pDNA). Stable polymer-pDNA complexes (polyplexes) with sizes in the range of 60-200 nm are formed at polymer/pDNA charge ratios (N/P) of 5 and above. When the PGAGs are complexed with Cy5-labeled pDNA (Cy5-pDNA) at N/P ratios of 10 and 25, between 80 and 95% of HeLa cells were positive for Cy5 fluorescence, indicating effective cellular internalization of the polyplexes. The toxicity of both PGAA and PGAG polyplexes was studied via MTT assays, and over 95% cell survival was observed at N/P ratios of 5, 10, 15, 20, 25, and 30 in HeLa cells. Transgene expression was examined via luciferase assays at various N/P ratios in the absence and presence of serum. In the absence of serum, the PGAG polyplexes revealed similar transgene expression when compared to polyplexes formed with their analogous PGAA structures. In the presence of serum, one analog (Gg) consisting of galactarate copolymerized with the guanidine monomer yielded gene expression similar to the positive control, Glycofect Transfection Reagent. This new series of guanidine-containing oligomers are promising as a new design strategy to incorporate an alternative charge center type within the backbone of glycopolymer-based nucleic acid delivery vehicles.     

HER2 targeted polyplexes: the effect of polyplex composition and conjugation chemistry on in vitro and in vivo characteristics

Knowledge of the influence of targeting ligands on pharmacokinetics and biodistribution of polymeric nonviral vectors is presently limited. We investigated the properties of three structurally different conjugates of polyethylenglycol-modified polyethylenimine coupled to the HER2 specific antibody Trastuzumab. Unlike polyethylenimine, conjugates formed small (100-230 nm) DNA polyplexes with zeta-potentials of +/- 2 mV at a broad range of N/P ratios. Stability as assessed by heparin displacement was slightly improved compared to unmodified copolymers. Erythrocyte aggregation and hemolysis were strongly reduced with conjugates. Conjugate polyplexes showed significant differences in specificity and transfection efficiency in vitro. These could be attributed to differences in cell binding and uptake assessed by flow cytometry. Pharmacokinetics of conjugates in mice revealed significant improvements over free plasmid DNA and polyethylenimine. Area under the plasma level-time curve of conjugates was increased up to 48% or 114% compared to that of polyethylenimine or free plasmid DNA, respectively. Deposition of conjugate polyplexes in lung and spleen was significantly reduced compared to that of polyethylenimine. Differences could be attributed to antibody conjugation since no significant differences in pharmacokinetics and biodistribution were found between conjugates. These findings demonstrate that conjugated antibodies not only confer active targeting but also significantly improve in vivo properties of polyplexes.     

The transfection of Jurkat T-leukemic cells by use of pH sensitive immunoliposomes

A gene transfer vector has been developed utilising anionic liposomes as a carrier of plasmid DNA (pEGlacZ, 7.6 kb) to transfect CD3+ T lymphocytes (Jurkat cells). The plasmid DNA that contained the Escherichia coli beta-galactosidase reporter gene was condensed using poly-l-lysine of molecular mass 20,700 (PLK99) to form a polyplex which was interacted with several anionic liposome formulations to form lipopolyplexes. The liposome formulations where based on dioleoylphosphatidylethanolamine (DOPE) in combination with cholesterol and dioleoylphosphatidylcholine (DOPC) and oleic acid, or dimyristoylphosphatidylethanolamine (DMPE). For targeting to the Jurkat cells distearoylphosphatidylethanolamine (DSPE) linked to poly (ethylene glycol) molecular mass 2,000 and coupled to anti-CD3 antibody was incorporated. The polyplexes and lipopolyplexes were characterised in terms of size, zeta potential, agarose gel electrophoresis and electron microscopy and the permeability of the lipopolyplexes to liposome-encapsulated glucose was determined. The polyplexes consisted of a mixed population of rod-like structures (53-160 nm long and 23-31 nm diameter) and spheres (18-30 nm diameter). The lipopolyplexes retained a permeability barrier although were more permeable to glucose than their component liposomes. The poly-l-lysine condensing agent was still susceptible to pronase digestion suggesting that the polyplex was associated with the outer surface of the liposome. The lipopolyplexes with lipid composition DOPE/cholesterol/OA/DSPE-PEG2000 anti-CD3+ PLK99-plasmid DNA had significant gene transfer activity, as monitored by beta-galactosidase expression, that depended on the charge ratio of the component polyplex and the lipid/DNA weight ratio. The anti-CD3 antibody, the liposomal lipid and pH sensitivity were essential for transfection activity.