Schiff-base complexes of dimethyldichlorosilane

Several Schiff-bases obtained by the condensation of monoamine or diamine with substituted benzaldehyde were synthesized and then coordinated with dimethyldichlorosilane. The products of reaction were characterized by elemental analyses, conductivity measurements, and infrared and nuclear magnetic resonance spectroscopic data. A majority of the complexes exhibit a 1:1 (silicon: Schiff-base) stoichiometry and a few have 1:2 stoichiometry.     

Entropies of Redox Reactions between Proteins and Mediators: The Temperature Dependence of Reversible Electrode Potentials in Aqueous Buffers

The temperature dependencies of the reversible electrode potentials for a number of charge transfer reactions of redox mediators were used to evaluate the corresponding charge transfer entropies in Tris–HCl (pH 8) buffer. The redox mediator thermodynamic data, along with reaction enthalpy data for mediator redox protein electron transfer, were used to evaluate the charge transfer entropy for the cytochrome c redox couple [(cytc)_ox/(cytc)_red] in Tris–HCl (pH 8) buffer and were found to be equal to −16 cal/°K mol. Reversible electrode potentials at 298°K for the redox mediator half-reactions were observed to vary from −528 to +657 mV (vs NHE). Charge transfer entropies were observed to depend upon the structure of the redox mediators and to vary from −13.8 to −29.7 cal/°K mol for a closely related series of organic dications (viologens) and a value of −43.6 cal/°K mol was observed for the [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻couple under the same conditions. A procedure for determining charge transfer entropies of protein redox couples which cannot be studied by direct electrochemical methods is outlined. The factors contributing to the magnitude of the charge transfer entropies are discussed.     

Multistimuli-responsive fluorescence behaviours of aggregation-induced emission small-molecule and electrospun nanofibre films for acid–base vapour sensing

Multistimuli-responsive fluorescent materials have garnered great research interest benefited from their practical applications. Two twisted-structure compounds containing tetraphenylethylene (TPE) as the aggregation-induced emission (AIE) group and a pyridine unit as the acid reaction site to obtain new multistimuli-responsive fluorescent compounds (namely, TPECNPy: TPECNPy-2 and TPECNPy-3) were successfully synthesized through a one-step Knoevenagel condensation reaction. The multiple-stimuli response process of TPECNPy was investigated by means of photoluminescence (PL) spectra and emission colour. The results showed that both TPECNPy compounds with excellent AIE abilities displayed reversible emission wavelength and colour changes in response to multiple external stimuli, including grinding–fuming by CH₂Cl₂ or annealing and HCl-NH₃ vapour fuming. More importantly, fluorescent nanofibre films were prepared by electrospinning a solution of TPECNPy mixed with cellulose acetate (CA), and these exhibited reversible acid-induced discolouration, even with only 1 wt% TPECNPy. The results of this study may inspire strategies for designing multistimuli-responsive materials and preparing fluorescent sensing nanofibre films.     

Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.     

Optimized Concentration of Redox Mediator and Surface Protection of Li Metal for Maintenance of High Energy Efficiency in Li–O2 Batteries

Recently, various approaches for adding redox mediators to electrolytes and introducing protective layers onto Li metal have been suggested to overcome the low energy efficiency and poor cycle life of Li–O₂ batteries. However, the catalytic effect of the redox mediator for oxygen evolution gradually deteriorates during repeated cycling owing to its decomposition at the surfaces of both the oxygen electrode (cathode) and the Li metal electrode (anode). Here, optimized Li–O₂ batteries are designed with a continuously effective redox mediator and a stable protective layer for the Li metal electrode by optimizing the LiBr concentration and introducing a graphene–polydopamine composite layer, respectively. These synergistic modifications lead to a reduction of the charge potential to below 3.4 V and significantly improve the stability and cycle life of Li–O₂ batteries. Consequently, a high energy efficiency of above 80% is maintained over 150 cycles. Herein, it is confirmed that the relationships between all the battery materials should be understood in order to improve the performance of Li–O₂ batteries.     

The role of interphase nitrogen transport in the dynamic measurement of the overall volumetric mass transfer cefficient in air-sparged systems

It has been shown both theoretically and experimentally that interphase nitrogen transport may have a significant influence on the rate of interphase oxygen transport, and thereby also on the value of the volumetric mass transfer coefficient of oxygen, k_la, determined in mechanically agitated bubble fermentors using the variants of dynamic method presented in the literature. The experiments were carried out in 1M KCI solution at five stirrer frequencies and two gas inlet levels. The gas interchanges were performed either without interrupting the aeration and agitation of the charge (A) or with the aeration and agitation of the charge turned on at the same time (B). The applied variants of the interchange were N₂→ O₂→, O₂→ N₂, N₂→ air, air→ N₂, O→ O₂, and O→ air. In the two last variants the oxygen dissolved in the charge was removed by reacting with sulfite ions. The k_la values calculated by allowing for the nitrogen transport for procedure A were approximately equal to the values obtained by disregarding the nitrogen transport, whereas those for procedure B were higher (up to 40%), than the values obtained disregarding the nitrogen transport.     

Spatially Confined MnO2 Nanostructure Enabling Consecutive Reversible Charge Transfer from Mn(IV) to Mn(II) in a Mixed Pseudocapacitor‐Battery Electrode

Mn oxides are highly important electrode materials for aqueous electrochemical energy storage devices, including batteries and supercapacitors. Although MnO₂ is a promising pseudocapacitor material because of its outstanding rate and capacity performance, its electrochemical instability in aqueous electrolyte prevents its use at low electrochemical potential. Here, the possibility of stabilizing MnO₂ electrode using SiO₂‐confined nanostructure is demonstrated. Remarkably, an exceptionally good electrochemical stability under large negative polarization in aqueous (Li₂SO₄) electrolyte, usually unattainable for MnO₂‐based electrode, is achieved. Even more interestingly, this MnO₂–SiO₂ nanostructured composite exhibits unique mixed pseudocapacitance‐battery behaviors involving consecutive reversible charge transfer from Mn(IV) to Mn(II), which enable simultaneous high‐capacity and high‐rate characteristics, via different charge‐transfer kinetic mechanisms. This suggests a strategy to design and stabilize electrochemical materials that are comprised of intrinsically unstable but high‐performing component materials.     

Analysis and Optimum Design of Hybrid Plasmonic Slab Waveguides

Propagation properties of hybrid plasmonic slab waveguides are studied in detail using transfer matrix method considering structural and material aspects. Hybrid metal–insulator, hybrid metal–insulator–metal, and hybrid insulator–metal–insulator waveguides are considered. Propagation length (L _p), spatial length (L _s), and mode length (L _m) are utilized as three common figures of merit to compare and optimize the waveguides according to the layer thicknesses and metal/dielectric materials. The effect of constituting materials including metals (such as silver, gold, copper, and aluminum) and dielectrics (common dielectric materials used in photonic integrated circuit technologies such as silicon and silicon compounds, III–V compounds, and polymers) are discussed. It is found that hybrid waveguides are partially to completely superior to conventional plasmonic waveguides, providing a better balance between confinement and loss.     

Structural analysis and antitussive evaluation of five novel esters of verticinone and bile acids

Shedan-Chuanbei powder, a complex of traditional Chinese medicine preparation, which consists of Snake Bile (Chinese name “Shedan”) and Fritillariae Cirrhosae (Chinese name “Chuanbei”), is the most popular antitussive and expectorant formulation in Chinese communities. However, the clinical application of Shedan-Chuanbei powder is now stringently limited because of the shortage of the two crude medicinal materials, especially for the sake of animal protection. In addition, the inherent defects of the most of the complex of traditional Chinese medicine such as the indistinct basal pharmacodynamic materials and the difficulties in quality control had blocked them heading into the international medicinal market. So we attempted to seek new substitute for Shedan-Chuanbei powder for antitussive drugs. In order to gain some new compounds with better bioactivity and attenuated toxicity, we tried to combine two kinds of drugs through ester bond. Enlightened with “combination principle” in drug discovery, we synthesized five novel esters of verticinone and bile acids, both of which are the major bioactive components in Shedan-Chuanbei powder. We then evaluated the antitussive activity and the acute toxicity of the five ester-linked compounds. The five ester-linked compounds had much more potent antitussive activity and expectorant activity than single bile acids at the same doses, and had equivalent antitussive activity and expectorant activity in comparison with about double moles dose of the monomer verticinone. Especially, cholic acid–verticinone ester had much more potent antitussive effects than the monomer verticinone or cholic acid at the same dose. A further acute toxicity study showed that the LD₅₀ values of the five ester-linked compounds exceeded 3.5 g/kg by intraperitoneal injection in mice. Based on the studies of pharmacology and acute toxicity, the five ester-linked compounds have synergic pharmacodynamic action and attenuated toxicity compared with single verticinone and single bile acids.     

Spectroscopic characterization of amino acid and amino acid ester-Schiff-base complexes of oxovanadium and their catalysis in sulfide oxidation

α-Amino acid Schiff-base complexes of oxovanadium(IV), whose ligands have amino acid side chains with coordinating functional groups, retained coordination geometries in which the amino acid side chains were probably coordinated in the axial position with a phenolate oxygen, a carboxylate oxygen, an imine nitrogen, and a solvent being bound in the equatorial plane. As for amino acid ester Schiff-base complexes, the amino acid side chains were coordinated in the equatorial plane in the place of the carboxyl group in the case of the amino acid Schiff-base complexes. The amino acid Schiff-base complexes of oxovanadium(V) were present as dimers in dichloromethane. Peroxo complexes prepared from the Schiff-base complexes of oxovanadium(V) converted methyl phenyl sulfide to the corresponding sulfoxide in 80-90% yield in CDCl₃ and in 30-70% yield in CD₃OD in 30 min. They converted the sulfide in a stereoselective manner yielding the sulfoxide in small enantiomeric excess (5-20%).     

Li–Ti Cation Mixing Enhanced Structural and Performance Stability of Li‐Rich Layered Oxide

Li‐rich layered metal oxides are one type of the most promising cathode materials in lithium‐ion batteries but suffer from severe voltage decay during cycling because of the continuous transition metal (TM) migration into the Li layers. A Li‐rich layered metal oxide Li_1.2Ti_0.26Ni_0.18Co_0.18Mn_0.18O₂ (LTR) is hereby designed, in which some of the Ti⁴⁺ cations are intrinsically present in the Li layers. The native Li–Ti cation mixing structure enhances the tolerance for structural distortion and inhibits the migration of the TM ions in the TMO₂ slabs during (de)lithiation. Consequently, LTR exhibits a remarkable cycling stability of 97% capacity retention after 182 cycles, and the average discharge potential drops only 90 mV in 100 cycles. In‐depth studies by electron energy loss spectroscopy and aberration‐corrected scanning transmission electron microscopy demonstrate the Li–Ti mixing structure. The charge compensation mechanism is uncovered with X‐ray absorption spectroscopy and explained with the density function theory calculations. These results show the superiority of introducing transition metal ions into the Li layers in reinforcing the structural stability of the Li‐rich layered metal oxides. These findings shed light on a possible path to the development of Li‐rich materials with better potential retention and a longer lifespan.     

Theoretical investigation into optical and electronic properties of 1,8-naphthalimide derivatives

A series of 1,8-naphthalimide derivatives has been designed to explore their optical, electronic, and charge transport properties as charge transport and/or luminescent materials for organic light-emitting diodes (OLEDs). The frontier molecular orbitals (FMOs) analysis have shown that the vertical electronic transitions of absorption and emission are characterized as intramolecular charge transfer (ICT) for electron-donating and aromatic groups substituted derivatives. However, the ICT character of the electron-withdrawing substituted derivatives is not significant. The calculated results show that their optical and electronic properties are affected by the substituent groups in 4-position of 1,8-naphthalimide. Our results suggest that 1,8-naphthalimide derivatives with electron-donating ?OCH₃ and ?N(CH₃)₂ (1 and 2), electron-withdrawing ?CN and?COCH₃ (3 and 4), 2-(thiophen-2-yl)thiophene (5), 2,3-dihydrothieno[3,4-b][1, 4]dioxine (6), 2-phenyl-1,3,4-oxadiazole (7), and benzo[c][1,2,5]thiadiazole (8) fragments are expected to be promising candidates for luminescent materials for OLEDs, particularly for 5 and 7. In addition, 3 and 7 can be used as promising hole transport materials for OLEDs. This study should be helpful in further theoretical investigations on such kind of systems and also to the experimental study for charge transport and/or luminescent materials for OLEDs.

Sensing and transfer of respiratory gases at the fish gill

The gill is both a site of gas transfer and an important location of chemoreception or gas sensing in fish. While often considered separately, these two processes are clearly intricately related because the gases that are transferred between the ventilatory water and blood at the gill are simultaneously sensed by chemoreceptors on, and within, the gill. Modulation of chemoreceptor discharge in response to changes in O(2) and CO(2) levels, in turn, is believed to initiate a series of coordinated cardiorespiratory reflexes aimed at optimising branchial gas transfer. The past decade has yielded numerous advances in terms of our understanding of gas transfer and gas sensing at the fish gill, particularly concerning the transfer and sensing of carbon dioxide. In addition, recent research has moved from striving to construct a single model that covers all fish species, to recognition of the considerable inter-specific variation that exists with respect to the mechanics of gas transfer and the cardiorespiratory responses of fish to changes in O(2) and CO(2) levels. The following review attempts to integrate gas transfer and gas sensing at the fish gill by exploring recent advances in these areas.     

Analytical modelling and simulation of gas adsorption effects on graphene nanoribbon electrical properties

Inspired by the realisation of the ability of graphene nanoribbon (GNR) based sensors to detect individual gas molecules, analytical approach based on the nearest neighbour tight-binding approximation is proposed to study the effect of gas adsorption on GNR electrical properties. Numerical calculations indicate that the electrical properties of the GNR are completely dependent on the adsorbed gas. Conductance as one of the most important electrical parameters as a sensing parameter is considered and analytically modelled. Additionally, gas adsorption effect on the conductance variation in the form of current-voltage characteristics is investigated which points out that gas adsorption dramatically influences electrical conductance of the GNR. Furthermore, to support the proposed analytical models, simulation study is carried out to investigate adsorption of O₂ and NH₃ gas molecules on the GNR surface. While, the charge transfer phenomenon that occurred as a result of molecular doping of the GNR is explored and the roll of band structure changes by adsorbents and their effects on the conductance and I-V characteristics of the GNRFET sensor is analysed. The comparison study with adopted experimental results is presented; also the I-V characteristics obtained from analytical modelling compared with the first principle calculations and close agreement is observed.     

Charge Accumulation and Hysteresis in Perovskite‐Based Solar Cells: An Electro‐Optical Analysis

Organic–inorganic hybrid perovskite solar cells based on CH₃NH₃PbI₃ have achieved great success with efficiencies exceeding 20%. However, there are increasing concerns over some reported efficiencies as the cells are susceptible to current–voltage (I–V) hysteresis effects. It is therefore essential that the origins and mechanisms of the I–V hysteresis can clearly be understood to minimize or eradicate these hysteresis effects completely for reliable quantification. Here, a detailed electro‐optical study is presented that indicates the hysteresis originates from lingering processes persisting from sub‐second to tens of seconds. Photocurrent transients, photoluminescence, electroluminescence, quasi‐steady state photoinduced absorption processes, and X‐ray diffraction in the perovskite solar cell configuration have been monitored. The slow processes originate from the structural response of the CH₃NH₃PbI₃ upon E‐field application and/or charge accumulation, possibly involving methylammonium ions rotation/displacement and lattice distortion. The charge accumulation can arise from inefficient charge transfer at the perovskite interfaces, where it plays a pivotal role in the hysteresis. These findings underpin the significance of efficient charge transfer in reducing the hysteresis effects. Further improvements of CH₃NH₃PbI₃‐based perovskite solar cells are possible through careful surface engineering of existing TiO₂ or through a judicious choice of alternative interfacial layers.     

Local Intermolecular Order Controls Photoinduced Charge Separation at Donor/Acceptor Interfaces in Organic Semiconductors

How free charge is generated at organic donor–acceptor interfaces is an important question, as the binding energy of the lowest energy (localized) charge transfer states should be too high for the electron and hole to escape each other. Recently, it has been proposed that delocalization of the electronic states participating in charge transfer is crucial, and aggregated or otherwise locally ordered structures of the donor or the acceptor are the precondition for this electronic characteristic. The effect of intermolecular aggregation of both the polymer donor and fullerene acceptor on charge separation is studied. In the first case, the dilute electron acceptor triethylsilylhydroxy‐1,4,8,11,15,18,22,25‐octabutoxyphthalocyaninatosilicon(IV) (SiPc) is used to eliminate the influence of acceptor aggregation, and control polymer order through side‐chain regioregularity, comparing charge generation in 96% regioregular (RR‐) poly(3‐hexylthiophene) (P3HT) with its regiorandom (RRa‐) counterpart. In the second case, ordered phases in the polymer are eliminated by using RRa‐P3HT, and phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) is used as the acceptor, varying its concentration to control aggregation. Time‐resolved microwave conductivity, time‐resolved photoluminescence, and transient absorption spectroscopy measurements show that while ultrafast charge transfer occurs in all samples, long‐lived charge carriers are only produced in films with intermolecular aggregates of either RR‐P3HT or PC₆₁BM, and that polymer aggregates are just as effective in this regard as those of fullerenes.     

Identification of formaldehyde-induced modifications in proteins: reactions with model peptides

Formaldehyde is a well known cross-linking agent that can inactivate, stabilize, or immobilize proteins. The purpose of this study was to map the chemical modifications occurring on each natural amino acid residue caused by formaldehyde. Therefore, model peptides were treated with excess formaldehyde, and the reaction products were analyzed by liquid chromatography-mass spectrometry. Formaldehyde was shown to react with the amino group of the N-terminal amino acid residue and the side-chains of arginine, cysteine, histidine, and lysine residues. Depending on the peptide sequence, methylol groups, Schiff-bases, and methylene bridges were formed. To study intermolecular cross-linking in more detail, cyanoborohydride or glycine was added to the reaction solution. The use of cyanoborohydride could easily distinguish between peptides containing a Schiff-base or a methylene bridge. Formaldehyde and glycine formed a Schiff-base adduct, which was rapidly attached to primary N-terminal amino groups, arginine and tyrosine residues, and, to a lesser degree, asparagine, glutamine, histidine, and tryptophan residues. Unexpected modifications were found in peptides containing a free N-terminal amino group or an arginine residue. Formaldehyde-glycine adducts reacted with the N terminus by means of two steps: the N terminus formed an imidazolidinone, and then the glycine was attached via a methylene bridge. Two covalent modifications occurred on an arginine-containing peptide: (i) the attachment of one glycine molecule to the arginine residue via two methylene bridges, and (ii) the coupling of two glycine molecules via four methylene bridges. Remarkably, formaldehyde did not generate intermolecular cross-links between two primary amino groups. In conclusion, the use of model peptides enabled us to determine the reactivity of each particular cross-link reaction as a function of the reaction conditions and to identify new reaction products after incubation with formaldehyde.     

Detection of hydrogen sulphide using cataluminescence sensors based on alkaline-earth metal salts

Detection of hydrogen sulphide (H₂S) was conducted based on cataluminescence (CTL) sensors, using alkaline‐earth metal carbonates as catalysts. Optimal working conditions, analytical characteristics and the response properties of the sensor were investigated. CTL intensity examination showed that sensors fabricated with CaCO₃, SrCO₃ or BaCO₃ could be used to detect H₂S gas sensitively. The optimal sensing temperature was about 320 °C. Under the sensing conditions with temperature at ca. 320 °C and gas flow rate in the range 180–200 mL/min, the linear range of CTL intensity vs H₂S concentration was 25–500 ppm, with a detection limit of 2 ppm. The response and recovery times of the sensor were within 5 and 25 min, respectively. Also, the sensor had the property of high selectivity to H₂S with very weak or no obvious response to 14 other gases, such as NO₂, NH₃, hydrocarbons and alcohol. Copyright © 2011 John Wiley & Sons, Ltd.     

The configuration,solvatochromism and metallo‐responses of two novel cyano‐containing oligo(phenylene‐vinylene) derivatives

Two novel cyano‐containing oligo(phenylenevinylene) (OPV) derivatives have been designed and synthesized. Photophysical and sensing properties of the two compounds were studied. Such studies reveal the intramolecular charge transfer process between cyano groups and OPV core. The results showed that the alkyl difference of substituted OPV leads to the changes of molecular configuration and metallo‐response of two compounds. Copyright © 2010 John Wiley & Sons, Ltd.     

Adsorption and diffusion of CO2 and CH4 in covalent organic frameworks: an MC/MD simulation study

Covalent organic frameworks (COFs) are a promising gas separation material which have been developed recently. In this work, we have used grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations to investigate the adsorption and diffusion properties of CO₂ and CH₄ in five recent synthesised COF materials. We have also considered the properties of amino-modified COFs by adding –NH₂ group to the five COFs. The adsorption isotherm, adsorption/diffusion selectivity, self/transport diffusion coefficients have been examined and discussed. All of the five COFs exhibit promising adsorption selectivity which is higher than common nanoporous materials. An S-shaped adsorption isotherm can be found for CO₂ instead of CH₄ adsorption. The introduction of –NH₂ group is effective at low pressure region (<200?kPa). The diffusion coefficients are similar for TS-COFs but increase with the pore size for PI-COFs, and the diffusion coefficients seem less dependent on the –NH₂ groups.