浅谈菌丝体表面分子印迹吸附剂的选择性吸附

通过制备的方法获得菌丝体表面分子印迹吸附剂,本文系统的分析和探讨了针对模板金属离子菌丝体表面分子印迹吸附剂的吸附选择性。通过实验研究证明,菌丝体表面分子印迹吸附剂如果是以Ni2+为模板制备的,相对于非印迹吸附剂来讲,其对Cr3+、Cu2+、Ni2+的吸附容量以及吸附速率的提高幅度都是非常大的。而菌丝体表面分子印迹吸附剂相对于具有Ni2+金属离子混合溶液来讲,其对Ni2+的选择性以及吸附容量要比含有诸如Cu2+以及Cr3+的金属离子提高的都要明显很多;印迹吸附剂相对于非印迹吸附剂来讲,其在吸附非模板金属离子Cu2+以及Cr3+时具有明显降低的选择性。     

硝酸铵水凝胶分子印迹聚合物的制备

目的:目前安全问题成为世界各国的首要问题,尤其是对炸药分子的检测。硝酸铵是硝铵炸药的主要成分。研究水凝胶分子印迹法对硝铵炸药分子的检测。方法:水凝胶分子印迹方法制备硝酸铵水凝胶分子印迹聚合物,运用静态结合实验对其结合率进行了测定。结果:聚合物对硝酸铵具有良好的识别和吸附性能。印迹聚合物的解离常数为4.08g/L,最大吸附量为3.51mg/g。结论:水凝胶分子印迹法可合成水溶性炸药分子印迹聚合物,并且识别及吸附性能良好。     

硝酸铵水凝胶分子印迹聚合物的制备

目的：目前安全问题成为世界各国的首要问题,尤其是对炸药分子的检测。硝酸铵是硝铵炸药的主要成分。研究水凝胶分子印迹法对硝铵炸药分子的检测。方法：水凝胶分子印迹方法制备硝酸铵水凝胶分子印迹聚合物,运用静态结合实验对其结合率进行了测定。结果：聚合物对硝酸铵具有良好的识别和吸附性能。印迹聚合物的解离常数为4.08g/L,最大吸附量为3.51mg/g。结论：水凝胶分子印迹法可合成水溶性炸药分子印迹聚合物,并且识别及吸附性能良好。     

分子印迹技术研究新进展

分子印迹技术是在近十几年来才发展起来的一门边缘科学技术。它结合了高分子化学、生物化学等学科 ,是模拟抗体 -抗原相互作用的一种新技术 ,具有选择性识别位点的性质。现已应用于色谱分离、抗体和受体模拟物、固相萃取、生物传感器等领域。     

分子印迹技术用于生物大分子的识别

分子印迹技术是一种人工合成具有分子识别功能的介质的一种新技术,近年来在许多领域都得到很大的发展。本文介绍了分子印迹技术的发展现状,尤其对生物大分子的分子印迹技术进行了详细论述,对生物大分子印迹采用的功能单体,印迹分子的种类,印迹的方法,印迹的机理,存在的问题和应用的前景等分别进行了讨论。     

白藜芦醇分子印迹聚合物微球的制备及特性评价(英文)

以聚苯乙烯微球为种球,白藜芦醇为模板分子,采用单步溶胀聚合法在N,N-二甲基甲酰胺体系中制备了单分散分子印迹聚合物微球。用扫描电镜对微球的结构和形貌进行了表征,并研究了微球的制备条件和吸附特性。微球的凹陷可有效地增加微球的比表面积和结合位点,从而提高了模板分子的结合速率及微球的印迹容量。     

分子印迹技术用于生物大分子的识别

分子印迹技术是一种人工合成具有分子识别功能的介质的一种新技术,近年来在许多领域都得到很大的发展。本文介绍了分子印迹技术的发展现状,尤其对生物大分子的分子印迹技术进行了详细论述,对生物大分子印迹采用的功能单体、印迹分子的种类、印迹的方法、印迹的机理、存在的问题和应用的前景等分别进行了讨论。     

基于分子印迹技术的细菌传感检测

分子印迹因其材料结构的稳定性及靶标物识别的特异性而被广泛应用于生化分离分析的相关领域。近年来，将具有选择性捕获、分离和富集靶标物等优势的分子印迹技术与生化传感检测技术有机结合，是目前细菌等微生物高效检测领域备受关注的研究热点。本文就分子印迹技术在细菌分析中的印迹方法、分析检测技术和典型应用等方面的最新进展进行综述。首先介绍了细菌分子印迹原理，对表面印迹的材料以及直接压印、间接印迹和电聚合等制备方法进行了总结和归纳；重点对基于荧光、电化学、石英晶体微天平（QCM）等检测模式的细菌印迹传感监测在细菌分析检测及其与微流控芯片技术耦合的应用和进展进行了综述；最后，提出了存在的挑战及发展的趋势。     

分子印迹技术及其在生物领域内的应用

分子印迹技术是近十年来发展起来的模拟抗体-抗原相互作用原理的新技术。在存在印迹分子的条件下,通过模板聚合可以构造出具有选择性识别位点的印迹聚合物。该聚合物可作为用于生物物质的监测、分析、分离与纯化等的基质。本文就分子印迹技术的产生、发展及其在生物领域中的应用做了较为详细的阐述,并对该技术的发展前景进行了预测 。     

The Selective Detection of Cyantraniliprole Insecticides Using Molecularly Imprinted Polymers Coupled with an Acetylcholinesterase Inhibition-Based Biosensor

Cyantraniliprole is one of the anthranilic diamide insecticides widely used in the agriculture sector. Due to its low toxicity and relatively fast degradation, there is need for a sensitive determination method for its residues. Nowadays, there is growing interest in the development of enzyme-based biosensors. The major drawback is the non-specific binding of many insecticides to the enzyme. This work employs Molecularly imprinted polymers (MIPs) to increase enzyme specificity and eliminate the organic solvent effect on the enzyme activity. The synthesized Cyan-Molecularly imprinted polymers (Cyan-MIP) possesses high affinity and selectivity toward cyantraniliprole. Acetylcholinesterase assay characteristics including enzyme concentration, substrate concentration, DTNB concentration, and acetonitrile concentration were optimized. Under optimal experimental conditions, the developed MIP-Acetylcholinesterase (MIP-AchE) inhibition-based sensor provides better precision than the AchE inhibition-based sensor with a wide linear range (15–50 ppm), limit of detection (LOD) 4.1 ppm, and limit of quantitation (LOQ) 12.6 ppm. The sensor was successfully applied for cyantraniliprole determination in spiked melon, giving satisfactory recoveries.     

Application of Molecularly Imprinted Polymers to Selective Removal of Clofibric Acid from Water

A new molecularly imprinted polymer (MIP) adsorbent for clofibric acid (CA) was prepared by a non-covalent protocol. Characterization of the obtained MIP was achieved by scanning electron microscopy (SEM) and nitrogen sorption. Sorption experimental results showed that the MIP had excellent binding affinity for CA and the adsorption of CA by MIP was well described by pseudo-second-order model. Scatchard plot analysis revealed that two classes of binding sites were formed in the MIP with dissociation constants of 7.52±0.46 mg L⁻¹ and 114±4.2 mg L⁻¹, respectively. The selectivity of MIP demonstrated higher affinity for CA over competitive compound than that of non-imprinted polymers (NIP). The MIP synthesized was used to remove CA from spiked surface water and exhibited significant binding affinity towards CA in the presence of total dissolved solids (TDS). In addition, MIP reusability was demonstrated for at least 12 repeated cycles without significant loss in performance.     

A Non-Biological Method for Screening Active Components against Influenza Virus from Traditional Chinese Medicine by Coupling a LC Column with Oseltamivir Molecularly Imprinted Polymers

To develop a non-biological method for screening active components against influenza virus from traditional Chinese medicine (TCM) extraction, a liquid chromatography (LC) column prepared with oseltamivir molecularly imprinted polymer (OSMIP) was employed with LC-mass spectrometry (LC-MS). From chloroform extracts of compound TCM liquid preparation, we observed an affinitive component m/z 249, which was identified to be matrine following analysis of phytochemical literatures, OSMIP-LC column on-line of control compounds and MS/MS off-line. The results showed that matrine had similar bioactivities with OS against avian influenza virus H9N2 in vitro for both alleviating cytopathic effect and hemagglutination inhibition and that the stereostructures of these two compounds are similar while their two-dimensional structures were different. In addition, our results suggested that the bioactivities of those affinitive compounds were correlated with their chromatographic behaviors, in which less difference of the chromatographic behaviors might have more similar bioactivities. This indicates that matrine is a potential candidate drug to prevent or cure influenza for human or animal. In conclusion, the present study showed that molecularly imprinted polymers can be used as a non-biological method for screening active components against influenza virus from TCM.     

Development of a Selective Molecularly Imprinted Polymer-Based Solid-Phase Extraction for Copper from Food Samples

In this study is proposed a pre-concentration procedure using molecular imprinted polymer for the determination of copper in food samples. The copper imprinted polymer was prepared by free radical solution polymerization in a tube containing copper, morin, 4-vinylpyridine as a functional monomer, ethyleneglycoldimethacrylate as a cross-linking monomer, and 2,2′-azobisisobutyronitrile as an initiator. The polymer particles synthesized both before and after leaching have been characterized by infrared and X-ray diffraction studies. The effect of different variables such as pH of solution, adsorption and desorption time, type, and least amount of eluent for elution of the complex of polymer was evaluated. Extraction efficiencies more than 99% were obtained by elution of the polymer with 10 mL of 0.5 mol L^?1 EDTA. The detection limit of the proposed procedure was 0.14 μg L^?1. The method was applied to the determination of copper in food real samples.