Whole-cell bacterial biosensors for the detection of aromatic hydrocarbons and their chlorinated derivatives (Review)

The review summarizes the data on new directions in biosensor technologies based on whole bacterial cells. Biosensors for the monitoring of mono(poly)aromatic hydrocarbons and their chlorinated derivatives, which are constructed with genetically modified bacterial cells bearing a reporter gene fusion, are considered. The operating principle of these biosensors is based on the expression of reporter genes (luc, lux, gfp, rfp) under the control of a promoter and a regulator that specifically respond to a detected compound.     

Biosensing environmental pollution

Whole-cell biosensors are finding increasing use for the detection of environmental pollution and toxicity. These biosensors are constructed through the fusion of promoters, responsive to the relevant environmental conditions, to easily monitored reporter genes. Depending on the choice of reporter gene, expression can be monitored by the production of colour, light, fluorescence or electrochemical reactions. Recent advances in this area have included the development of biosensors of compact size that enable the on-line and in situ monitoring of a large number of environmental parameters.     

New family of biosensors for monitoring BTX in aquatic and edaphic environments

Benzene, toluene, ethylbenzene and xylenes (BTEX) contamination is a serious threat to public health and the environment, and therefore, there is an urgent need to detect its presence in nature. The use of whole‐cell reporters is an efficient, easy‐to‐use and low‐cost approach to detect and follow contaminants outside specialized laboratories; this is especially important in oil spills that are frequent in marine environments. The aim of this study is the construction of a bioreporter system and its comparison and validation for the specific detection of monocyclic aromatic hydrocarbons in different host bacteria and environmental samples. Our bioreporter system is based on the two component regulatory system TodS–TodT of P. putida DOT‐T1E, and the P_todX promoter fused to the GFP protein as the reporter protein. For the construction of different biosensors, this bioreporter was transferred into three different bacterial strains isolated from three different environments, and their performance was measured. Validation of the biosensors on water samples spiked with petrol, diesel and crude oil on contaminated waters from oil spills and on contaminated soils demonstrated that they can be used in mapping and monitoring some BTEX compounds (specifically benzene, toluene and two xylene isomers). Validation of biosensors is an important issue for the integration of these devices into pollution‐control programmes.     

The Use of Whole-Cell Biosensors to Detect and Quantify Compounds or Conditions Affecting Biological Systems

A new and promising technique in microbial ecology and environmental biology is the use of whole-cell bacterial biosensors. This minireview describes the use of such biosensors for detection and quantification of various compounds and other conditions affecting bacterial expression of different genes. Three types of biosensors (nonspecific, stress-induced, and specific biosensors) are described including their use in different environments. We present tables of published biosensors, including gene fusions, host organisms, and environments in which they are used. We here describe the use of different reporter genes in the construction of biosensors and discuss their use as tools for monitoring the bioavailability of pollutants and their potential use in studying microbial ecology in general.     

Optical imaging fiber-based live bacterial cell array biosensor

A live cell array biosensor was fabricated by immobilizing bacterial cells on the face of an optical imaging fiber containing a high-density array of microwells. Each microwell accommodates a single bacterium that was genetically engineered to respond to a specific analyte. A genetically modified Escherichia coli strain, containing the lacZ reporter gene fused to the heavy metal-responsive gene promoter zntA, was used to fabricate a mercury biosensor. A plasmid carrying the gene coding for the enhanced cyan fluorescent protein (ECFP) was also introduced into this sensing strain to identify the cell locations in the array. Single cell lacZ expression was measured when the array was exposed to mercury and a response to 100nM Hg(2+) could be detected after a 1-h incubation time. The optical imaging fiber-based single bacterial cell array is a flexible and sensitive biosensor platform that can be used to monitor the expression of different reporter genes and accommodate a variety of sensing strains.     

Bacterial arylsulfate sulfotransferase as a reporter system.

To investigate whether the arylsulfate sulfotransferase (ASST) is suitable as a reporter system for monitoring gene expression, a reporter vector carrying the fragments of the astA coding region without the promoter region was constructed and designated as pSY815. As a test of the ASST reporter system's suitability, the regulatory regions of ermC and lacZ were inserted upstream of the coding region of the reporter gene to generate pSY815-EC and pSY815-LZ, respectively. In the absence of the inserted regulatory regions, the plasmids displayed very low background activities in Bacillus subtilis and Escherichia coli. The ASST activity under the control of the ermC regulatory region was increased 4.4-fold in B. subtilis when induced by 0.1 microgml(-1) of erythromycin. These results were consistent with a lacZ reporter gene assay of the ermC regulatory region. Furthermore, we confirmed that the lacZ promoter in E. coli was strongly induced to a 17.9-fold increase by 0.05 mM of isopropyl-beta-D-thiogalactopyranoside (IPTG) in this reporter system. These results indicate that the ASST is a suitable reporter system. The lack of endogenous activity, the simple detection of enzyme activity in the living cell, the commercially available non-toxic substrates, and the high sensitivity make ASST a useful genetic reporter system for monitoring gene expression and understanding gene regulation.     

Binding of polycyclic aromatic hydrocarbons to mutants of odorant-binding protein: a first step towards biosensors for environmental monitoring

Polycyclic aromatic hydrocarbons are among the most threatening pollutants widely present in the environment. Simple and economic methods of continuous monitoring of these compounds in real time are not yet available, although becoming increasingly needed. Odorant-binding proteins (OBPs) present unique characteristics of thermal and chemical stability for building robust, reliable, and inexpensive biosensors for such molecules. To investigate this possibility, we have engineered the pig OBP, whose three-dimensional structure has been resolved, introducing a tryptophan residue in the core of the binding pocket, as a fluorescence reporter for the presence of bound ligands. Binding affinities of several polyaromatic hydrocarbons to mutagenically modified OBPs were measured in competitive binding assays. Moreover, the presence of aromatic ligands was also successfully monitored in the modified OBPs by recording the quenching of intrinsic fluorescence of the protein. These data indicate that OBPs bind several aromatic polycyclic compounds with good affinities, that the specificity of these proteins can be easily modified by changing specific amino acid residues and that the introduction of a tryptophan residue in the binding site allows monitoring of aromatic ligands using direct fluorescence measurements.     

Genetically engineered microbial biosensors for in situ monitoring of environmental pollution

Microbial biosensors are compact, portable, cost effective, and simple to use, making them seem eminently suitable for the in situ monitoring of environmental pollution. One promising approach for such applications is the fusion of reporter genes with regulatory genes that are dose-dependently responsive to the target chemicals or physiological signals. Their biosensor capabilities, such as target range and sensitivity, could be improved by modification of regulatory genes. Recent uses of such genetically engineered microbial biosensors include the development of portable biosensor kits and high-throughput cell arrays on chips, optic fibers, or other platforms for on-site and on-line monitoring of environmental pollution. This mini-review discusses recent advances in microbial biosensors and their future prospects, with a focus on the development and application of genetically modified microbial biosensors for in situ environmental monitoring.     

In situ measurement of bioluminescence and fluorescence in an integrated microbioreactor

Reporter strains of bacteria that emit light or a fluorescent marker in response to specific conditions in their environment are having a significant impact in many areas of biology, including toxicity assays for environmental pollutants, chemical detection, and gene expression profiling. We have demonstrated methods for in situ measurements of bioluminescence and fluorescence from bacterial cultures grown in 50 microL instrumented microbioreactors. Results from microbioreactors were compared to results obtained from conventional 500 mL batch bioreactors and shake flasks. Experiments were conducted with reporter strains of Escherichia coli in which luxCDABE or gfp was fused to a promoter that was either expressed constitutively, or that responded to oxygen limitation. With these reporter strains, we have demonstrated the ability to obtain information on growth conditions within the microbioreactor. We have also shown that the large aspect ratio of the microbioreactor provides a unique advantage over measurements in larger bioreactors by reducing the inner filter effect in on-line measurements and eliminating the need for error-prone off-line dilutions. In addition, continuous on-line monitoring of genes in real-time, when expanded to include entire reporter libraries, could potentially provide a true dynamic picture of cellular gene expression from which the kinetics of gene expression can be untangled and elucidated.     

New in vitro reporter gene bioassays for screening of hormonal active compounds in the environment

Identification of chemicals with endocrine-disrupting activities in the past two decades has led to the need for sensitive assays for detection and monitoring of these activities in the environment. In vitro reporter gene assays represent a relatively fast and easy-to-perform method for detection of compounds that are able to bind to hormonal receptors and stimulate or silence their transactivation activity, thus interfering with the hormone signaling pathways. This paper reviews upgrades on reporter gene assays performed during the last decade. The utilization of new reporter genes (luciferase and green fluorescent protein coding genes) significantly improved the sensitivity of the tests and made them faster. Reporter gene assays now represent a high-throughput system for screening chemicals for hormonal activity. Finally, modification of test set-ups for testing anti-hormonal activities also enabled measurements of endocrine-disrupting activities in complex environmental samples such as sediments and wastewater treatment plant effluents.     

Applications of whole-cell bacterial sensors in biotechnology and environmental science

Biosensors have major advantages over chemical or physical analyses with regard to specificity, sensitivity, and portability. Recently, many types of whole-cell bacterial biosensors have been developed using recombinant DNA technology. The bacteria are genetically engineered to respond to the presence of chemicals or physiological stresses by synthesizing a reporter protein, such as luciferase, β-galactosidase, or green fluorescent protein. In addition to an overview of conventional biosensors, this minireview discusses a novel type of biosensor using a photosynthetic bacterium as the sensor strain and the crtA gene, which is responsible for carotenoid synthesis, as the reporter. Since bacteria possess a wide variety of stress-response mechanisms, including antioxidation, heat-shock responses, nutrient-starvation, and membrane-damage responses, DNA response elements for several stress-response proteins can be fused with various reporter genes to construct a versatile set of bacterial biosensors for a variety of analytes. Portable biosensors for on-site monitoring have been developed using a freeze-dried biosensing strain, and cell array biosensors have been designed for high-throughput analysis. Moreover, in the future, the use of single-cell biosensors will permit detailed analyses of samples. Signals from such sensors could be detected with digital imaging, epifluorescence microscopy, and/or flow cytometry.     

Characterization of Pseudomonas putida mutants unable to catabolize benzoate: cloning and characterization of Pseudomonas genes involved in benzoate catabolism and isolation of a chromosomal DNA fragment able to substitute for xylS in activation of the TOL lower-pathway promoter.

Mutants of Pseudomonas putida mt-2 that are unable to convert benzoate to catechol were isolated and grouped into two classes: those that did not initiate attack on benzoate and those that accumulated 3,5-cyclohexadiene-1,2-diol-1-carboxylic acid (benzoate diol). The latter mutants, represents by strain PP0201, were shown to lack benzoate diol dehydrogenase (benD) activity. Mutants from the former class were presumed either to carry lesions in one or more subunit structural genes of benzoate dioxygenase (benABC) or the regulatory gene (benR) or to contain multiple mutations. Previous work in this laboratory suggested that benR can substitute for the TOL plasmid-encoded xylS regulatory gene, which promotes gene expression from the OP2 region of the lower or meta pathway operon. Accordingly, structural and regulatory gene mutations were distinguished by the ability of benzoate-grown mutant strains to induce expression from OP2 without xylS by using the TOL plasmid xylE gene (encoding catechol 2,3-dioxygenase) as a reporter. A cloned 12-kb BamHI chromosomal DNA fragment from the P. aeruginosa PAO1 chromosome complemented all of the mutations, as shown by restoration of growth on benzoate minimal medium. Subcloning and deletion analyses allowed identification of DNA fragments carrying benD, benABC, and the region possessing xylS substitution activity, benR. Expression of these genes was examined in a strain devoid of benzoate-utilizing ability, Pseudomonas fluorescens PFO15. The disappearance of benzoate and the production of catechol were determined by chromatographic analysis of supernatants from cultures grown with casamino acids. When P. fluorescens PFO15 was transformed with plasmids containing only benABCD, no loss of benzoate was observed. When either benR or xylS was cloned into plasmids compatible with those plasmids containing only the benABCD regions, benzoate was removed from the medium and catechol was produced. Regulation of expression of the chromosomal structural genes by benR and xylS was quantified by benzoate diol dehydrogenase enzyme assays. The results obtained when xylS was substituted for benR strongly suggest an isofunctional regulatory mechanism between the TOL plasmid lower-pathway genes (via the OP2 promoter) and chromosomal benABC. Southern hybridizations demonstrated that DNA encoding the benzoate dioxygenase structural genes showed homology to DNA encoding toluate dioxygenase from the TOL plasmid pWW0, but benR did not show homology to xylS. Evolutionary relationships between the regulatory systems of chromosomal and plasmid-encoded genes for the catabolism of benzoate and related compounds are suggested.     

Feasibility of using prokaryote biosensors to assess acute toxicity of polycyclic aromatic hydrocarbons

The aim of this study was to assess the acute toxicity of polycyclic aromatic hydrocarbons using lux-marked bacterial biosensors. Standard solutions of phenanthrene, pyrene and benzo[a]pyrene were produced using 50 mM hydroxpropyl-β-cyclodextrin solution which contained each respective polycyclic aromatic hydrocarbon at 6.25 times the aqueous solubility limit of the compound. The polycyclic aromatic hydrocarbon solutions were incubated with each of the biosensors for 280 min and the bioluminescence monitored every 20 min. Over the incubation time period, there was no significant decrease in bioluminescence in any of the biosensors tested with the exception of Rhizobium leguminosarum biovar trifolii TA1 luxAB. In this series of incubations, there was a dramatic increase in bioluminescence in the presence of phenanthrene (2.5 times) and benzo[a]pyrene (3 times) above that of the background control (biosensor without polycyclic aromatic hydrocarbon) after 20 min. Over the next 3 h, bioluminescence decreased to that of the control. An ATP assay was carried out on the biosensors to assess if uncoupling of the oxidative phosphorylation mechanisms in the respiratory chain of the cells had occurred. However, it was found that the polycyclic aromatic hydrocarbons had no effect on the organisms indicating that there was no uncoupling. Additionally, mineralisation studies using ¹⁴C-labelled polycyclic aromatic hydrocarbons showed that the biosensors could not mineralise the compounds. This study has shown that the three polycyclic aromatic hydrocarbons tested are not acutely toxic to the prokaryotic biosensors tested, although acute toxicity has been shown in other bioassays. These results question the rationale for using prokaryote biosensors to assess the toxicity of hydrophobic chemicals, such as polycyclic aromatic hydrocarbons.     

Improvement of the bioluminescence reporter system for real-time monitoring of circadian rhythms in the cyanobacterium Synechocystis sp. strain PCC 6803

Circadian rhythm is a self-sustaining oscillation whose period length coincides with the 24-hour day-night cycle. A powerful tool for circadian clock research is the real-time automated bioluminescence monitoring system in which a promoter region of a clock-controlled gene is fused to a luciferase reporter gene and rhythmic regulation of the promoter activity is monitored as bioluminescence. In the present study, we greatly improved the bioluminescence reporter system in the cyanobacterium Synechocystis sp. strain PCC 6803. We fused an 805-bp promoter region of the dnaK gene seamlessly to the luxA coding sequence and integrated the P(dnaK)::luxAB fusion gene into a specific intergenic region of the Synechocystis genome (targeting site 1). The resulting new reporter strain, PdnaK::luxAB(-), showed 12 times the bioluminescence intensity of the standard reporter strain, CFC2. Furthermore, we generated strain PdnaK::luxAB(+), in which the P(dnaK)::luxAB fusion gene and the selection-marker spectinomycin resistance gene are transcribed in opposite directions. The PdnaK::luxAB(+) strain showed 19 times the bioluminescence intensity of strain CFC2. The procedures used to increase the bioluminescence intensity are especially useful for bioluminescence monitoring of genes with low promoter activity. In addition, these reporter constructs facilitate bioluminescence monitoring of any gene because the promoter fragments they contain can easily be replaced by digestion with unique restriction enzymes. They would therefore contribute to a genome-wide analysis of gene expression in Synechocystis.     

Potential diagnostic applications of biosensors: current and future directions

This review describes recent advances in biosensors of potential clinical applications. Biosensors are becoming increasingly important and practical tools in pathogen detection, molecular diagnostics, environmental monitoring, food safety control as well as in homeland defense. Electrochemical biosensors are particularly promising toward these goals arising due to several combined advantages including low-cost, operation convenience, and miniaturized devices. We review the clinical applications of electrochemical biosensors based on a few selected examples, including enzyme-based biosensors, immunological biosensors and DNA biosensors.     

Aspects Affecting Biosynthesis and Biotransformation of Secondary Metabolites in Plant Cell Cultures

Abstract

Biosensors are useful analytical devices that can be integrated with on-line process monitoring schemes. In this article, the principles and applications of these devices for bioprocess monitoring are considered. Several different types of biosensors are described, and the applications and limitations of flow injection analysis (FIA) for these applications are discussed. It is hoped that the background provided here can be useful to researchers in this area.