Synthesis and characterization of cellulose/silica hybrid materials with chemical crosslinking

The cellulose/silica hybrid biomaterials are prepared by sol–gel covalent crosslinking process. The tetraethoxysilane (TEOS) as precursor, γ-aminopropyltriethoxylsilane (APTES) as couple agent, and 2,4,6-tri[(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent, are used in the sol–gel crosslinking process. The chemical and morphological structures of cellulose/silica covalent crosslinking hybrids are investigated with micro-FT-IR spectra, nitrogen element analysis, X-ray diffraction, SEM, AFM, and DSC. The results show that the cellulose/silica hybrids form new macromolecular structures. In sol–gel process, inorganic particles are dispersed at the nanometer scale in the cellulose host matrix, bounding to the cellulose through covalent bonds. The cellulose/silica covalent crosslinking hybrid can form good and smooth film on the cellulose. The thermal properties of organic/inorganic hybrids are improved.     

Radical graft functional modification of cellulose with allyl monomers: Chemistry and structure characterization

Cotton cellulose was successfully functionalized via a free radical graft polymerization process. Potassium persulfate served as an effective water soluble radical initiator to generate cellulosic radicals. The polymeric radicals could react with allyl monomers such as allyl-dimethylhydantion (ADMH) to form surface grafted cellulose. The reaction sites generated by potassium persulfate were probably at carbon 3 and 4 in glucose ring via oxidative hydrogen abstraction. The cellulosic radicals can initiate grafting polymerization of ADMH with a maximum polymerization degree of about 12 based on LC–MS results. The radical graft polymerization mechanisms were proposed based on LC–ESI/MS analysis. The ideal covalent bonding between cellulose and poly (allyl-dimethylhydantion) (PADMH) ensured permanent graft of the monomers on cotton and durability of the expected functions on the treated cotton.     

A versatile method for functionalization and grafting of 2-hydroxyethyl cellulose (HEC) via Click chemistry

This article describes a versatile method for the modification of 2-hydroxyethyl cellulose (HEC) involving azide-alkyne cycloaddition reaction to impart neutral (ester) and ionic (carboxylic acid and 1(ry) amine) functionalities. The synthetic approach involved, first the introduction of the azide functionality to HEC and then followed by its cycloaddition reaction with several alkyne terminated compounds: namely ethyl propiolate, 5-hexynoic acid and propargyl amine. Sequential Click reactions were also demonstrated to be feasible by the successful synthesis of polydimethylsiloxane (PDMS) grafted HEC containing neutral (ester) and ionic (carboxylic acid and 1(ry) amine) functionalities. The Click chemistry was then further utilized similarly to graft poly(lactic acid) (PLA) and poly(ethylene glycol) (PEG) segments to HEC to access its hydrophobic and hydrophilic analogs, respectively. AFM analysis revealed that while HEC itself formed uniform oval features, the PLA grafted HEC exhibited a brushlike architecture. The formation of these brushlike structures suggested that the HEC backbone exhibits an extended conformation with the side chains stretched out. The resulting polymeric materials were characterized by solution and solid state (13)C NMR and FTIR spectroscopy.     

Hybrid rigid/soft and biologic/synthetic materials: polymers grafted onto cellulose microcrystals

Rigid nanoscale polymer rods were prepared by grafting preformed amine-terminated poly(styrene) and poly(tert-butyl acrylate) onto oxidized cellulose microcrystals. Low polydispersity polymers, grown using atom transfer radical polymerization, were characterized and purified prior to cellulose attachment. Oxidation of the cellulose microcrystal led to the formation of carboxylic acids on the surface of the microcrystals. Covalent attachment of the polymers onto the cellulose microcrystals was achieved via a carbodiimide-mediated amidation reaction. The length and diameter of the polymer-cellulose composites increased upon surface modification. Typically, polymer-cellulose composites are synthesized by a grafting-from method because it can be difficult to obtain sufficient graft density using a grafting-to preparation. However, the composites reported here comprised 60-64% grafted polymer by mass. This degree of grafting-to allowed the composite to form stable suspensions in organic solvents.     

Preparation of cellulose graft poly(methyl methacrylate) copolymers by atom transfer radical polymerization in an ionic liquid

Cellulose graft poly(methyl methacrylate) copolymers were prepared by atom transfer radical polymerization (ATRP) in an ionic liquid. Cellulose chloroacetate, as a macroinitiator, was first synthesized by direct acylation of cellulose with chloroacetyl chloride without any catalysts under mild conditions in an ionic liquid, 1-allyl-3-methylimidazolium chloride (BMIMCl). Then, the macroinitiator was used for the ATRP of MMA mediated by the CuBr and 2,2′-bipyridine (bpy) catalysis system. The copolymerization was carried out in BMIMCl without homopolymer byproduct. The polymers were easily separated from the catalyst when the ionic liquid was used as reaction medium. The grafting copolymers were characterized by means of ¹H NMR, AFM and GPC. The results showed that the obtained copolymers had grafted polymer chains with well-controlled molecular weight and polydispersity, and the polymerization was a “living/controlled” system. Further, through AFM observation, it was found that the cellulose graft copolymer in solution could aggregate and self-assembly into sphere-like polymeric structure.     

Graft copolymerization of methyl methacrylate onto Bombyx mori initiated by semiconductor-based photocatalyst

Methyl methacrylate (MMA) was graft copolymerized onto Bombyx mori fibre (natural silk). The graft copolymerization was carried out by photopolymerization of MMA using semiconductor particles (CdS) as photocatalyst in the presence of visible light. The effect of additives like triethylamine (Et(3)N) and ethylene glycol on graft copolymerization was studied. We have achieved 2-10% graft conversion with 10-20% homopolymer formation. After removal of the homopolymer, the graft copolymer (grafted fibre) was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC). The chemical resistance of grafted fibre was compared with virgin one.     

General properties of silated hydroxyethylcellulose for potential biomedical applications.

The general properties of hydroxyethylcellulose (HEC) grafted with 3-glycidoxypropyltrimethoxysilane (GPTMS) or 3-glycidoxypropylmethyldiethoxysilane (GPDMS) were studied for potential biomedical applications. The graft involved a Williamson reaction between the free hydroxyl function of HEC and the epoxy function of the two silanes. As the grafted silanes are in ionic form (sodium silanolate), this product remains in gel form at basic pH (>12.3) in aqueous solution. When pH decreases, sodium silanolate is transformed into silanol (2 or 3 silanol functions are carried by silicon, depending on the silane grafted). The silanols interreact, and the gel is transformed into a cross-linking form at room or body temperature. Studies were conducted to optimise this product for specific uses. Steam sterilization was used to compare self-hardening as a function of the silane grafted. Our previous work indicated that HEC grafted with GPTMS has good reactivity, but requires high pH for dissolution, whereas dissolution occurs at lower pH with GPMDS. The rate of silanol condensation for silated HEC was then determined as a function of pH, temperature, type of silane, and the percentage grafted. Condensation rates were ascertained by the viscosity method, and gels were neutralized by different solutions to obtain buffered forms at various pH. The time required to obtain 10(5) mPa x s, with an initial state of 2500 mPa x s, was then calculated. Condensation was catalysed in acid or basic medium at a lower rate at pH 5.5-6.5, and a temperature rise increased the condensation rate, regardless of the pH or silane studied. Silanetriol was more reactive than silanediol. However, as HEC lost considerable viscosity after sterilization, further studies will be conducted to develop new polysaccharides grafted with silane.     

Laccase from Aspergillus niger: A novel tool to graft multifunctional materials of interests and their characterization

In the present study, we propose a green route to prepare poly(3-hydroxybutyrate) [(P(3HB)] grafted ethyl cellulose (EC) based green composites with novel characteristics through laccase-assisted grafting. P(3HB) was used as a side chain whereas, EC as a backbone material under ambient processing conditions. A novel laccase obtained from Aspergillus niger through its heterologous expression in Saccharomyces cerevisiae was used as a green catalyst for grafting purposes without the use of additional initiator and/or cross-linking agents. Subsequently, the resulting P(3HB)-g-EC composites were characterized using a range of analytical and imagining techniques. Fourier transform infrared spectroscopy (FT-IR) spectra showed an increase in the hydrogen-bonding type interactions between the side chains of P(3HB) and backbone material of EC. Evidently, X-ray diffraction (XRD) analysis revealed a decrease in the crystallinity of the P(3HB)-g-EC composites as compared to the pristine individual polymers. A homogeneous P(3HB) distribution was also achieved in case of the graft composite prepared in the presence of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) as a mediator along with laccase as compared to the composite prepared using pure laccase alone. A substantial improvement in the thermal and mechanical characteristics was observed for grafted composites up to the different extent as compared to the pristine counterparts. The hydrophobic/hydrophilic properties of the grafted composites were better than those of the pristine counterparts.     

Immunological factors in Peromyscus speciation

Reciprocal interspecific F1 hybrids of deermice (Peromyscus maniculatus) and oldfield mice (P. polionotus) differ significantly and substantially in fetal and placental, as well as adult, size and weight. Hybrid fetal mortality is associated with large conceptus size. Skin grafts were exchanged between and within the two species to ascertain whether any relationship exists between mean graft retention time and body size of fetuses and adults. P. maniculatus skin grafted to P. polionotus rejected significantly earlier than the reciprocal xenograft. All interspecific graft combinations rejected significantly earlier than intraspecific grafts. Pre-immunization of female P. maniculatus with con- and trans-specific paternal spleen cell antigens reduced fetal, placental, neonatal, and ten-day size compared with controls. Size, weight, fertility, and graft rejection data were compared with several theoretical models. The data were consistent with the hypothesis that immunological disparity between the species could produce marked size variations in reciprocal hybrids. Multiple minor histocompatibility factors can account for large placental size and fetal mortality in Peromyscus hybrids. Physiological reproductive isolation may result from immunological differences between closely allied species.     

Synthesis and characterization of hydroxypropyl methylcellulose and ethyl acrylate graft copolymers

The synthesis of hydroxypropyl methylcellulose-g-poly (ethyl acrylate) was carried out by potassium persulfate induced graft copolymerization in homogeneous aqueous medium. By varying the reaction conditions, graft copolymers with different percentage of grafting were prepared. These graft copolymers were characterized by fourier transform infrared spectra (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetric analyses (TGA), X-ray diffraction analysis (XRD), and dynamic light scattering (DLS) methods. The molecular weight of grafted and ungrafted polymer chains determined by gel permeation chromatography (GPC) increased with increasing monomer and matrix concentration but decreased with increasing initiator concentration and reaction temperature. The mechanical properties of graft copolymers were measured as function of the percentage of grafting. In addition, the equilibrium humidity adsorption behavior and the disintegration time of the grafted copolymer films were also studied.     

Surface interaction forces of cellulose nanocrystals grafted with thermoresponsive polymer brushes

The colloidal stability and thermoresponsive behavior of poly(N-isopropylacrylamide) brushes grafted from cellulose nanocrystals (CNCs) of varying graft densities and molecular weights was investigated. Indication of the grafted polymer brushes was obtained after AFM imaging of CNCs adsorbed on silica. Also, aggregation of the nanoparticles carrying grafts of high degree of polymerization was observed. The responsiveness of grafted CNCs in aqueous dispersions and as an ultrathin film was evaluated by using light scattering, viscosimetry, and colloidal probe microscopy (CPM). Light transmittance measurements showed temperature-dependent aggregation originating from the different graft densities and molecular weights. The lower critical solution temperature (LCST) of grafted poly(NiPAAm) brushes was found to decrease with the ionic strength, as is the case for free poly(NiPAAm) in aqueous solution. Thermal responsive behavior of grafted CNCs in aqueous dispersions was observed by a sharp increase in dispersion viscosity as the temperature approached the LCST. CPM in liquid media for asymmetric systems consisting of ultrathin films of CNCs and a colloidal silica probe showed the distinctive effects of the grafted polymer brushes on interaction and adhesive forces. The origin of such forces was found to be mainly electrostatic and steric in the case of bare and grafted CNCs, respectively. A decrease in the onset of attractive and adhesion forces of grafted CNCs films were observed with the ionic strength of the aqueous solution. The decreased mobility of polymer brushes upon partial collapse and decreased availability of hydrogen bonding sites with higher electrolyte concentration were hypothesized as the main reasons for the less prominent polymer bridging between interacting surfaces.     

Reactions of nonsymmetrical bidentate linkers having a phthalimidoyl and acid chloride group or a 2-benzothiazole group with α-D-glucoside derivatives and their application for the modification of cellulose

The reaction of ‘active ester’ bidentate cross-linking reagents, phthalimido 4-chloroformylbutanoate (1) and phthalimido 4-(2-benzothiazolyloxycarbonyl)butanoate (2) with several protected d-glucose derivatives is described. These reactions are used to introduce the reactive group into cellulose (filter paper) with the aim of linking proteins and cellulose.     

Antibacterial cellulose fiber via RAFT surface graft polymerization

2-(dimethylamino)ethyl methacrylate (DMAEMA) was polymerized from cellulosic filter paper via reversible addition-fragmentation chain transfer (RAFT) polymerization. The tertiary amino groups of the grafted PDMAEMA chains were subsequently quaternized with alkyl bromides of different chain lengths (C8-C16) to provide a large concentration of quaternary ammonium groups on the cellulose surface. The antibacterial activity of the quaternized and nonquaternized PDMAEMA-grafted cellulosic fibers was tested against Escherichia coli. The antibacterial activity was found to depend on the alkyl chain length and on the degree of quaternization, i.e., the amount of quaternary amino groups present in the cellulose graft copolymers. The PDMAEMA-grafted cellulose fiber with the highest degree of quaternization and quaternized with the shortest alkyl chains was found to exhibit particularly high activity against E. coli.     

Isolation of the prohead core of bacteriophage T4 after cross-linking and determination of protein composition

The naked core of bacteriophage T4 was isolated ex vivo after cross-linking with either glutaraldehyde or dithiobis(succinimidyl propionate). The isolated particles appeared to be morphologically identical to the cores found in thin sections, to those demonstrated in in situ lysis preparations, and to core structures assembled in vitro. Treatment with glutaraldehyde provided core particles which were morphologically well preserved, whereas dithiobis(succinimidyl propionate)-induced cross-linking was reversible and allowed analysis of the protein composition of the isolated particles. The identity of the reversibly cross-linked particles with those obtained after irreversible cross-linking was suggested by their morphology and their similar sedimentation behavior. Immunolabeling confirmed the structural presence of the main core protein in both structures. Gel electrophoresis of reversibly cross-linked cores revealed the essential head proteins gp22, gp67, and gp21, the three internal proteins IPI, IPII, and IPIII, and a 17K protein.     

Enzyme immobilization on ultrafine cellulose fibers via poly(acrylic acid) electrolyte grafts

Ultrafine cellulose fiber (diameter 200-400 nm) surfaces were grafted with polyacrylic acid (PAA) via either ceric ion initiated polymerization or methacrylation of cellulose with methacrylate chloride (MACl) and subsequent free-radical polymerization of acrylic acid. PAA grafts by ceric ion initiated polymerization increased with increasing reaction time (2-24 h), monomer (0.3-2.4 M), and initiator (1-10 mM) concentrations, and spanned a broad range from 5.5-850%. PAA grafts on the methacrylated cellulose fibers also increased with increasing molar ratios of MACl to cellulosic hydroxyl groups (MACl/OH, 2-6.4) and monomer acrylic acid (AA) to initiator potassium persulfate (KPS) ratios ([AA]/[KPS], 1.5-6), and were in a much narrower range between 12.8% and 29.4%. The adsorption of lipase (at 1 mg/ml lipase and pH 7) and the activity of adsorbed lipase (pH 8.5, 30 degrees C), in both cases decreased with increasing PAA grafts. The highest adsorption and activity of the lipase on the ceric ion initiated grafted fibers were 1.28 g/g PAA and 4.3 U/mg lipase, respectively, at the lowest grafting level of 5.5% PAA, whereas they were 0.33 g/g PAA and 7.1 U/mg lipase, respectively, at 12.8% PAA grafts on the methacrylated and grafted fibers. The properties of the grafted fibers and the absorption behavior and activity of lipase suggest that the PAA grafts are gel-like by ceric-initiated reaction and brush-like by methacrylation and polymerization. The adsorbed lipase on the ceric ion-initiated grafted surface possessed greatly improved organic solvent stability over the crude lipase. The adsorbed lipases exhibited 0.5 and 0.3 of the initial activity in the second and third assay cycles, respectively.     

Role of the pericarp cellulose matrix as a moisture barrier in microwaveable popcorn

Since moisture loss of popcorn can cause an increase in the number of unpopped kernels, pericarp properties of popcorn hybrids were analyzed to understand factors affecting moisture loss rate during microwave heating. Differential scanning calorimetry profiles of ground pericarp displayed a notable exothermal event, and hybrids with superior microwave popping performance (fewer unpopped kernels) exhibited significantly higher enthalpies. The number of unpopped kernels was highly correlated (r = 0.826, p = 0.011) with pericarp enthalpy values. X-ray analysis confirmed that cellulose and arabinoxylan are the major structural components of the pericarp. Structural changes in cellulose were induced by moisture and heat, and considerable enhancement in crystallinity occurred when the pericarp was heated in the presence of water. Results of this study indicate that the cellulose component of the pericarp is responsible for the development of exothermal events and increased crystallinity. Thus, the propensity of cellulose to form crystalline structures in the popcorn pericarp during microwave heating improves moisture retention and hence popping performance.     

Argon microwave plasma treatment and subsequent hydrosilylation grafting as a way to obtain silicone biomaterials with well-defined surface structures

A method of grafting well-defined and hydrolytically stable surface structures onto cross-linked poly(dimethylsiloxane) (PDMS) has been developed. In the first step, argon microwave plasma was used to introduce Si-H groups onto the surface. In the second step, allyltetrafluoroethyl ether was grafted to these Si-H groups using a platinum-catalyzed hydrosilylation reaction. The influences of the plasma parameters of power, pressure, and treatment time on the surface composition, both before and after the hydrosilylation step, were investigated by X-ray photoelectron spectroscopy and contact angle measurements. It was found that the pressure had little influence on the results, whereas the power and treatment time determined the rate of change in surface composition during the plasma treatment. The graft yield reached a plateau value corresponding to about 5% grafted molecules in the analyzed surface region. Hydrosilylation grafting of PDMS is a promising method to obtain biomaterials with hydrolytically stable structures covalently bound to the surface.     

Cross-linking of double-helical nucleic acids with a photoreactive analogue of ethidium

Intercalation of the ethidium analogue 3,5-diazido-5-ethyl-6-phenylphenanthridinium into double helices followed by irradiation with blue or ultraviolet light results in cross-linking between the two strands with an efficiency around 30% for DNA, RNA, and DNA-RNA hybrids. Details of this reaction and a convenient synthesis of the ethidium analogue are described. Stable tertiary structure in RNA impedes intercalation and thus reduces the efficiency of cross-linking. In contrast to the ethidium derivative, various acridine diazides show little or no cross-linking ability.     

Antimicrobial-modified sulfite pulps prepared by in situ copolymerization

Grafting guanidine polymer (PHGH) onto cellulose fibers was conducted via in situ free-radical polymerization using ceric ammonium nitrate (CAN) as an initiator. The optimum reaction conditions were obtained, under which the grafting percentage and the grafting efficiency reached over 20% and 50%, respectively. Atomic force microscopy (AFM) images revealed that the grafted polymer tended to form grains with diameters ranging from 60 to 200 nm. AFM also enabled us to identify the location of the grafts on the surfaces of cellulose fibers by the measurements of the adhesion and attraction forces between a colloid probe and the samples. The cellulose fibers were rendered antimicrobial in the presence of 1.0% (wt) grafted polymer, and an excellent antimicrobial activity (over 99% inhibition) toward Escherichia coli was achieved. The AFM results also demonstrated that the antimicrobial mechanism of PHGH is to destroy the membrane of the cells.     

Temperature-responsive cellulose by ceric(IV) ion-initiated graft copolymerization of N-isopropylacrylamide

Temperature-responsive cellulose has been obtained by graft copolymerization of N-isopropylacrylamide (NIPAAm) monomer using ceric ammonium nitrate (CAN) as initiator at 25.0 +/- 0.1 degrees C in acidic medium. Kinetic and grafting parameters were evaluated at different concentrations of NIPAAm ranging from 1.25 x 10(-3) to 12.5 x 10(-3) mol dm(-3) and varying concentrations of CAN from 1.5 x 10(-3) to 9.0 x 10(-3) mol dm(-3) at constant concentration of nitric acid (2.5 x 10(-2) mol dm(-3)). The graft copolymerization of NIPAAm onto cellulose has shown a significant increasing trend below lower critical solution temperature (LCST) of poly(N-isopropylacrylamide) (PNIPAAm) and shown low energy of activation (18.0 kJ mol(-1)) for graft copolymerization within the temperature range of 10-35 degrees C as determined with Arrhenius plot. The PNIPAAm-grafted cellulose has shown improved thermal stability and shown temperature-dependent degree of swelling. Variation in degree of swelling of PNIPAAm-grafted cellulose as a function of temperature has been used to determine LCST of PNIPAAm-grafted cellulose. The contact angle (theta) has shown variation on increasing the graft yield and temperature. On the basis of experimental observations, the reaction steps for graft copolymerization have been proposed and a rate expression has been derived.