Interaction between gene II protein and the DNA replication origin of bacteriophage f1

The origin of DNA replication of the filamentous bacteriophage f1 binds its initiator protein (gene II protein) in vitro to form a complex that can be trapped on nitrocellulose filters. The binding occurs with both superhelical form DNA and linear DNA fragments. A number of defective mutants of the origin were tested for the ability to bind gene II protein. The region of DNA required for the binding is around a second palindrome downstream from the palindrome that contains the DNA replication initiation site. It overlaps, but is not identical to, the region required for the nicking reaction by the protein. The nicking site itself was dispensable for the binding. In vivo, a number of defective deletion mutants of the origin, when in a plasmid, inhibited growth of superinfecting phage if the intracellular level of gene II protein was low. In addition, these defective origins inhibited the activity of the functional phage origin located on the same replicon. The domain of the DNA sequence required for inhibition in vivo was consistent with that for the binding in vitro.     

Rolling circle replication of single-stranded DNA plasmid pC194.

A group of small Staphylococcus aureus/Bacillus subtilis plasmids was recently found to replicate via a circular single-stranded DNA intermediate (te Riele et al., 1986a). We show here that a 55 bp region of one such plasmid, pC194, has origin activity when complemented in trans by the plasmid replication protein. This region contains two palindromes, 5 and 14 bp long, and a site nicked by the replication protein. DNA synthesis presumably initiated at the nick in the replication origin can be terminated at an 18 bp sequence homologous to the site of initiation, deriving from another plasmid, pUB110, or synthesized in vitro. This result suggests that, similar to the Escherichia coli single-stranded DNA phages, pC194 replicates as a rolling circle. Interestingly, there is homology between replication origins and replication proteins of pC194 and the phage phi mX174.     

Tertiary initiation of replication in bacteriophage T4. Deletion of the overlapping uvsY promoter/replication origin from the phage genome

Tertiary initiation of bacteriophage T4 DNA replication is resistant to the RNA polymerase inhibitor rifampicin and apparently involved in the activity of recombination hot spots in the T4 genome (Kreuzer, K. N., and Alberts, B. M. (1985) Proc. Natl. Acad. Sci. U. S. A. 82, 3345-3349). One of the origins that function by the tertiary mechanism maps at the promoter for gene uvs Y. A deletion and a linker-insertion mutation in the uvsY promoter/origin region were generated by in vitro manipulations and then placed into the T4 genome using the insertion/substitution system (Selick, H. E., Kreuzer, K. N., and Alberts, B. M. (1988) J. Biol. Chem. 263, 11336-11347). Both resulting phage strains are uvsY- mutants, but they differ in that one has a deletion of the minimal tertiary origin and the other does not. The effects of the uvsY mutations on tertiary origin activity were assayed by infecting tertiary origin plasmid-bearing Escherichia coli with the two phage mutants. The tertiary origin plasmids replicated extensively after infection by either uvsY- phage mutant, demonstrating that the uvsY protein is not required for tertiary initiation. The extent of plasmid replication was increased dramatically as a result of either mutation, indicating that the uvsY protein plays some negative role in either the initiation or subsequent processing of plasmid replicative intermediates. The phage strain with an origin deletion induced the replication of a tertiary origin plasmid with which it shared no homology. Therefore, plasmid-phage recombination is not required for the replication of tertiary origin plasmids. The replication of a tertiary origin plasmid is also shown to be independent of the phage genes uvsX, 59, and 46, but markedly reduced by mutations in the T4-induced topoisomerase.     

Replication of a plasmid containing two origins of bacteriophage f1

A chimeric plasmid was constructed that contains a tandem duplication of the bacteriophage f1 origin of DNA replication. This plasmid replicates stably in the absence of phage. When cells carrying this plasmid are infected with f1, two new plasmid-derived DNA species are generated: a smaller, chimeric plasmid containing only one f1 origin of replication, and a miniphage, the genome of which consists of the f1 fragment that was located between the two f1 origins of the original plasmid. These data support the hypothesis (Horiuchi, 1980) that the nucleotide sequence recognized for initiation of plus strand synthesis in f1 DNA replication is also the signal for its termination.     

Cloning and sequence analysis of a plasmid replicon from Lactococcus lactis subsp. cremoris FG2

A replication region from one of the Lactococcus lactis subsp. cremoris FG2 plasmids was isolated by cloning of a 4.8-kb XbaI fragment into a replication probe vector and transformation into L. lactis LM0230. A 1.8-kb region within this fragment was sequenced and confirmed by PCR subcloning to encode a functional replicon in LM0230. The replicon consists of an open reading frame encoding a putative replication protein (Rep) of 386 amino acids and a non-coding region (ori) which features several structural motifs typical of other known replication origins, including a 22-bp iteron sequence tandemly repeated three and a half times, a 10-bp direct repeat and two sets of inverted repeats. The ori region could drive replication of its plasmid when supplied with the replication region in-trans. The lack of detectable single-stranded DNA during replication and the existence of extensive homology with other known lactococcal theta replicons strongly suggest that this region encodes a theta-replicating mechanism.     

Replication origins of single-stranded-DNA plasmid pUB110.

The two replication origins of plasmid pUB110 have been characterized. The site of initiation of DNA replication at the plus origin was mapped to within an 8-base-pair sequence. DNA synthesis initiated at the origin was made to terminate precociously in an inserted sequence of 18 base pairs that is homologous to a sequence in the origin. This suggests that pUB110 replicates as a rolling circle. The minus origin of plasmid pUB110 has been characterized, and the minimal sequence required for function has been determined. As with other minus origins, activity is orientation specific with respect to the direction of replication. Its activity is sensitive to rifampin in vivo, suggesting that RNA polymerase catalyzes single-strand to double-strand conversion. Unlike all other plasmids of gram-positive bacteria thus far described, the pUB110 minus origin is functional in more than one host.     

Plasmids from two morphologically distinct cyanobacterial strains share a novel replication origin.

A 2.9-kbp replication origin from a plasmid endogenous to the filamentous cyanobacterium Fremyella diplosiphon UTEX 481 was genetically characterized and sequenced. Deletion analysis of the 2.9-kbp DNA fragment delimited the minimum region necessary for replication in F. diplosiphon Fd33 to approximately 2.5 kbp. DNA sequence analysis revealed that the F. diplosiphon plasmid replication origin is structurally very similar to and shares significant identity with the 1.75-kbp replication origin reported for plasmid pDU1, isolated from the morphologically distinct cyanobacterium Nostoc sp. strain PCC 7524. Each cyanobacterial plasmid replication origin includes a large open reading frame that predicts a conserved protein of unknown function; the predicted proteins of the replication origins are of similar sizes and 30% identical in amino acid sequence. Each cyanobacterial plasmid replication origin also possesses a region of dyad symmetry approximately 300 bp upstream of the conserved open reading frame.     

Plasmid Co1IB contains an ssi signal close to the replication origin

Taking advantage of the plaque morphology method, we identified a single-strand initiation (ssi) signal in plasmid pSM32, a mini-Co1Ib plasmid. This ssi signal was situated in the 350-nt HaeIII segment of the 1.8-kb S7 fragment, and located nearly 400 nt downstream of the origin of DNA replication. Introduction of the ssi signal into a mutant of filamentous phage M13 lacking oric resulted in restoration of phage growth and RFI DNA synthesis. Interestingly, DNA homology studies showed that the nucleotide sequence of the ssi signal was extremely homologous with that of the "G4-type" ssi signal in plasmid R100.     

A modified TnphoA useful for single-stranded DNA sequencing.

The TnphoA transposon constructed by Manoil and Beckwith [Proc. Natl. Acad. Sci. USA 82 (1985) 8129-8133] has been modified to permit easy isolation of single-stranded (ss) DNA of target plasmids. The intergenic region (IG) of filamentous phage f1, which consists of the phage origin of replication and packaging signal, was inserted into a nonessential region of TnphoA. This modified transposon should be useful for the analysis of genes cloned in plasmids that lack a filamentous phage IG. Transposition of TnphoA-IG into a plasmid carries the IG with it; subsequently, after infection with a filamentous helper phage, ss plasmid DNA suitable for sequence analysis and useful for oligodeoxyribonucleotide-mediated mutagenesis of TnphoA-generated fusions can be isolated. The utility of TnphoA-IG was confirmed by analysis of 'blue hops' into the bla (encoding beta-lactamase) and pspE (encoding phage shock protein) genes whose products are secreted into the Escherichia coli periplasm.     

Functional mapping and DNA sequence of an equine herpesvirus 1 origin of replication.

The genome of equine herpesvirus 1 (EHV-1) defective interfering (DI) particle DNA originates from discrete regions within the standard (STD) EHV-1 genome: the left terminus (0.0 to 0.04 map units) and the inverted repeats (0.78 to 0.79 and 0.83 to 0.87 map units of the internal inverted repeat; 0.91 to 0.95 and 0.99 to 1.00 map units of the terminal inverted repeat). Since DI DNA must contain cis-acting DNA sequences, such as replication origins, which cannot be supplied in trans by the STD EHV-1 virus, regions of the EHV-1 genome shown to be in DI DNA were assayed for the presence of a viral origin of DNA replication. Specifically, STD EHV-1 DNA fragments encompassing the genomic regions present in DI particle DNA were inserted into the vector pAT153, and individual clones were tested by transfection assays for the ability to support the amplification and replication of plasmid DNA in EHV-1-infected cells. The Sma-1 subfragment of the internal inverted repeat sequence (0.83 to 0.85 map units) was shown to contain origin of replication activity. Subcloning and BAL 31 deletion analysis of the 2.35-kilobase-pair (kbp) Sma-1 fragment delineated a 200-bp fragment that contained origin activity. The origin activities of all EHV-1 clones which were positive by the transfection assay were confirmed by methylation analysis by using the methylation-sensitive restriction enzymes DpnI and MboI. DNA sequencing of the 200-bp fragment which contained an EHV-1 origin of replication indicated that this region has significant homology to previously characterized origins of replication of human herpesviruses. Furthermore, comparison of known origin sequences demonstrated that a 9-bp sequence, CGTTCGCAC, which is conserved among all origins of replication of human lytic herpesviruses and which is contained within the 18-bp region in herpes simplex virus type 1 origins shown by others to be protected by an origin-binding protein (P. Elias, M. E. O'Donnell, E. S. Mocarski, and I. R. Lehman, Proc. Natl. Acad. Sci. USA 83:6322-6326) is also conserved across species in the EHV-1 origin of replication.     

Replication origin of a single-stranded DNA plasmid pC194.

The replication of the single-stranded (ss) DNA plasmid pC194 by the rolling circle mechanism was investigated using chimeric plasmids that possess two pC194 replication origins. One of the origins was intact, whereas the other was either intact or mutated. The origins were activated by inducing synthesis of the pC194 replication protein, under the control of lambda phage pL promoter. Initiation of pC194 replication at one origin and termination at the other generated circular ssDNA molecules smaller than the parental chimeric plasmid. From the nature and the amount of ssDNA circles, the activity of an origin could be assessed. Our results show that (i) the signal for initiation of pC194 replication is more stringent than that for termination; (ii) the sequence and structure of the origin are important for its activity and (iii) successful termination of one replication cycle is not followed by reinitiation of another. This last observation differentiates a ssDNA plasmid (pC194) from a ssDNA phage (phi X174).     

A novel replicon occurring naturally in Escherichia coli is a phage-plasmid hybrid.

A novel DNA replicon in Escherichia coli was identified. It is the smallest natural isolate (1282 bp) found so far. In the presence of phage M13 it grows as a filamentous single-stranded DNA phage. Contrary to previously identified mini-phages this replicon displays sequence homology only to parts of the M13 viral and complementary strand origin. In the absence of M13 this DNA replicates autonomously. The only gene (arp) of the replicon encodes a 32-kd protein, which is essential for autonomous replication. The host rep gene required for replication of single-stranded DNA phages is dispensable. Distinct replication mechanisms are thus involved during growth as defective phage or as autonomous plasmid.     

Initiation and termination of the bacteriophage phi X174 rolling circle DNA replication in vivo: packaging of plasmid single-stranded DNA into bacteriophage phi X174 coats.

The bacteriophage phi X174 viral (+) origin when inserted in a plasmid can interact in vivo with the A protein produced by infecting phi X174 phages. A consequence of this interaction is packaging of single-stranded plasmid DNA into preformed phage coats resulting in infective particles (1). This property was used to study morphogenesis and to analyse the signals for initiation and termination of the rolling circle DNA replication in vivo. It is shown that the size of the DNA had a strong effect on the encapsidation by the phage coats and the infectivity of the particle. Termination was analysed by using plasmids with two phi X (+) origins either in the same orientation or in opposite orientation. Both origins were used with equal frequency. Initiation at one origin resulted in very efficient termination (greater than 96%) at the second origin in the case of two origins in the same orientation. When the two (+) origins have opposite orientations, no correct termination was observed. The second origin in the opposite strand effectively inhibits (greater than 98%) the normal DNA synthesis; i.e. the covalently bound A protein present in the replication fork interacts with the (+) origin sequence in the opposite strand.     

Characterization of a region of plasmid pBL1 of Brevibacterium lactofermentum involved in replication via the rolling circle model.

The minimal region for autonomous replication of pBL1, a 4.5-kb cryptic plasmid of Brevibacterium lactofermentum ATCC 13869 that has been used to construct a variety of corynebacterium vectors, was shown to be contained on a 1.8-kb HindII-SphI DNA fragment. This region contains two open reading frames (ORFs) (ORF1 and ORF5) which are essential for pBL1 replication in B. lactofermentum. Accumulation of single-strand intermediates in some of the constructions indicates that plasmid pBL1 replicates via the rolling circle replication model; its plus strand and minus strand were identified by hybridization with two synthetic oligonucleotide probes complementary to each pBL1 strand. ORF1 seems to encode the Rep protein and showed partial homology with sequences for Rep proteins from Streptomyces plasmids which replicate via rolling circle replication such as pIJ101, pSB24, and pJV1.     

Nucleotide sequence of the genome of the filamentous bacteriophage I2-2: Module evolution of the filamentous phage genome

Summary The nucleotide sequence of the circular single-stranded genome of the filamentous Escherichia coli phage I2-2 has been determined and compared with those of the filamentous E. coli phages Ff(M13, fl, or fd) and IKe. The I2-2 DNA sequence comprises 6744 nucleotides; 139 nucleotides less than that of the N- and I2-plasmid-specific phage IKe, and 337 (336) nucleotides more than that of the F-plasmid-specific phage Ff. Nucleotide sequence comparisons have indicated that I2-2, IKe, and Ff have a similar genetic organization, and that the genomes of I2-2 and IKe are evolutionarily more closely related than those of I2-2 and Ff. The studies have further demonstrated that the I2-2 genome is a composite replicon, composed of only two-thirds of the ancestral genome of IKe. Only a contiguous I2-2 DNA sequence of 4615 nucleotides encompassing not only the coat protein and phage assembly genes, but also the signal required for efficient phage morphogenesis, was found to be significantly homologous to sequences in the genomes of IKe and Ff. No homology was observed between the consecutive DNA sequence that contains the origins for viral and complementary strand replication and the replication genes. Although other explanations cannot be ruled out, our data strongly suggest that the ancestor filamentous phage genome of phages I2-2 and IKe has exchanged its replication module during evolution with that of another replicon, e.g., a plasmid that also replicates via the so-called rolling circle mechanism. Offprint requests to: R.N.H. Konings     

The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.     

The nucleotide sequence of the replication origin beta of the plasmid R6K

We h ave identified by molecular cloning a region of 283 base pairs of the HindIII 2 fragment of R6K which corresponds to the region of the replication origin beta. This 283 base-pair DNA fragment, when present contiguously with the structural gene for the replication initiation protein of R6K, encoded in the HindIII 9-15 and part of HindIII 2 restriction fragments, will support the replication of a plasmid chimera containing the pBR322 replicon in a pol Ats host at the nonpermissive temperature. The nucleotide sequence of the region of replication origin beta has been determined. The nucleotide sequence has some homology with the ori gamma region of R6K; it has a 15-base-pair homology with the replication origin of Escherichia coli.