Construction of a pilot plant for producing fine linen fibers for textiles

A newly built 200-L-pilot plant was used for testing a novel chemo-enzymatic process for producing fine flax fibers without the weather-associated risks of dew retting. Raw, green and decorticated flax fibers were placed inside trays in the tempered main tank of the pilot plant, where a vertically acting mechanism gently moved the parallel fiber bundles. The fibers were incubated in an alkaline bath, in a pectinolytic culture of Geobacillus thermoglucosidasius PB94A and in a peroxide-softener bath. Finally the fibers were dried, combed and hackled into a sliver that is ready for wet-spinning of linen yarns. A total of 140 kg of raw fibers were treated in 40 different experiments in the pilot plant. The resolution of the raw fibers improved from 7.3 to 2.7 ± 0.3 after the treatment. The fineness was enhanced from 37.4 dtex to 11.1 ± 1.2 dtex. The proposed pilot-plant process produced constant-quality fibers and could be easily up-scaled.     

Pseudozyma sp. SPJ: an economic and eco-friendly approach for degumming of flax fibers

A cellulase free, alkaline, thermo-tolerant pectinase was produced by a novel yeast strain Pseudozyma sp. SPJ using citrus peel as inexpensive carbon source. The crude enzyme showed good prospects in degumming of flax fibers for textile industry. An optimum pectinase dose of 80 U g⁻¹ resulted in reduction of 15 ± 1.92% dry weight of the fibers, releasing maximum galacturonic acid (10825.5 ± 34.2 μg g⁻¹ dry fiber) after the incubation of 6 h. The yeast culture could grow on the flax fibers (as sole carbon source) without addition of any other nutrient and produce good enzyme yield (9235.5 ± 21.51 U g⁻¹ dry fiber). After 12 h incubation of the fibers with the isolated yeast strain, 4471 ± 19.5 μg g⁻¹ dry fiber galacturonic acid was achieved with maximum weight loss of 11 ± 1.2%. This process reduced the amount of chemicals and energy used in conventional methods. It also contributed to enhance fineness and overall quality of the fiber strands. This study is relevant to the textile industry as it provided a fast, economical and eco-friendly method for degumming of flax fibers.     

Elucidating the effects of laccase-modifying compounds treatments on bast and core fibers in flax pulp

Laccases in combination with various chemical compounds have been tested with a view to obtain environmental friendly, high‐value paper products from unbleached flax pulp, which is currently being assessed as a raw material for biotechnological innovation. With the aim of better understanding the effects of violuric acid (VA) and p‐coumaric acid (PCA) on flax pulp, changes in the chemical composition of the two major fiber types it contains were assessed. Following classification, the initial pulp was split into two fractions according to fiber size, namely: bast (long) fibers and core (short) fibers. Fiber size was found to significantly influence the properties of pulp and it response to various laccase treatments. The laccase‐PCA treatment substantially increased kappa number (KN) and color in both fiber fractions, which suggests grafting of the phenolic compound onto fibers. On the other hand, the laccase‐VA treatment produced long fibers with a low lignin content (KN = 1.3) and a high brightness (5% points higher than for the control fraction), which testifies to its bleaching efficiency. Both biotreatments produced long fibers containing highly crystalline cellulose and caused HexA removal from global and short fibers. On the other hand, the laccase treatments caused no morphological changes in the fibers, the integrity of which was largely preserved. As shown here, laccase acts as polymerization agent with PCA and as delignification agent with VA; also, the two enzymes systems act differently on bast and core fibers. Biotechnol. Bioeng. 2012;109: 225–233. © 2011 Wiley Periodicals, Inc.     

Effects of Cannabinoids on Caffeine Contractures in Slow and Fast Skeletal Muscle Fibers of the Frog

The effect of cannabinoids on caffeine contractures was investigated in slow and fast skeletal muscle fibers using isometric tension recording. In slow muscle fibers, WIN 55,212-2 (10 and 5 μM) caused a decrease in tension. These doses reduced maximum tension to 67.43 ± 8.07% (P = 0.02, n = 5) and 79.4 ± 14.11% (P = 0.007, n = 5) compared to control, respectively. Tension-time integral was reduced to 58.37 ± 7.17% and 75.10 ± 3.60% (P = 0.002, n = 5), respectively. Using the CB₁ cannabinoid receptor agonist ACPA (1 μM) reduced the maximum tension of caffeine contractures by 68.70 ± 11.63% (P = 0.01, n = 5); tension-time integral was reduced by 66.82 ± 6.89% (P = 0.02, n = 5) compared to controls. When the CB₁ receptor antagonist AM281 was coapplied with ACPA, it reversed the effect of ACPA on caffeine-evoked tension. In slow and fast muscle fibers incubated with the pertussis toxin, ACPA had no effect on tension evoked by caffeine. In fast muscle fibers, ACPA (1 μM) also decreased tension; the maximum tension was reduced by 56.48 ± 3.4% (P = 0.001, n = 4), and tension-time integral was reduced by 57.81 ± 2.6% (P = 0.006, n = 4). This ACPA effect was not statistically significant with respect to the reduction in tension in slow muscle fibers. Moreover, we detected the presence of mRNA for the cannabinoid CB₁ receptor on fast and slow skeletal muscle fibers, which was significantly higher in fast compared to slow muscle fiber expression. In conclusion, our results suggest that in the slow and fast muscle fibers of the frog cannabinoids diminish caffeine-evoked tension through a receptor-mediated mechanism.     

Muscle fiber type characteristics in females with chronic obstructive pulmonary disease. A preliminary study

Chronic obstructive pulmonary disease (COPD) is known to elicit intrinsic abnormalities in male skeletal muscle. However, it is unclear to what extent these changes occur in women and whether they are fiber-type specific. We investigated fiber-type specific differences in selected histochemical properties in muscle obtained from women with moderate to severe COPD compared to healthy control (CON) women. Tissue was obtained from the vastus lateralis in five COPD patients (age 66.9 ± 2.6 years; FEV₁ = 43 ± 7%) and eight CON (age 68 ± 4.9 years; FEV₁ = 113 ± 4.2%). Compared to CON, the distribution (30.6 ± 5.2 vs. 57.9 ± 4.6%) and cross sectional area of type I (CSA, 5660 ± 329 vs. 3586 ± 257 μm²) and type IIA (2770 ± 302 vs. 2099 ± 206 μm²) were lower (P < 0.05) and higher (P < 0.05), respectively, in COPD. Disease state did not alter either the distribution or CSA of the IIA, IIAX or type X subtypes. Although differences were found between fiber types in the number of capillary contacts (n) (I > IIAX, IIX; IIA > IIX) and the capillaries per CSA (μm²10⁻³) (I < IIA, IIAX, IIX), no differences were found between CON and COPD. Succinic dehydrogenase activity and sarcoplasmic reticulum (SR) Ca²⁺-ATPase activity, measured photometrically (OD units), were higher (P < 0.05), and lower (P < 0.05), respectively, in type I compared to the type II fiber subtypes. These properties were not altered with COPD. COPD in females is accompanied by a higher percent of type II fibers, a larger CSA of type I and type IIA fibers, both of which occur in the absence of differences in oxidative potential and the potential for SR Ca²⁺-sequestration.     

Biosoftening of coir fiber using selected microorganisms

Coir fiber belongs to the group of hard structural fibers obtained from coconut husk. As lignin is the main constituent of coir responsible for its stiffness, microbes that selectively remove lignin without loss of appreciable amounts of cellulose are extremely attractive in biosoftening. Five isolated strains were compared with known strains of bacteria and fungi. The raw fiber treated with Pseudomonas putida and Phanerocheate chrysosporium produced better softened fiber at 30±2 °C and neutral pH. FeSO₄ and humic acid were found to be the best inducers for P. chrysosporium and P. putida, respectively, while sucrose and dextrose were the best C-sources for both. Biosoftening of unretted coir fibers was more advantageous than the retted fibers. Unlike the weak chemically softened fiber, microbial treatment produced soft, whiter fibers having better tensile strength and elongation (44.6–44.8%) properties. Scanning electron microscopy photos showed the mycelia penetrating the pores of the fiber, removing the tylose plug and degrading lignin.     

Glibenclamide increases post-fatigue tension in slow skeletal muscle fibers of the chicken

In contrast to fast-twitch skeletal muscle fibers of the chicken, slow-twitch fibers are fatigue-resistant. In fast fibers, the fatigue process has been related to K_ATP channels. In the present study, we investigated the action of glibenclamide (an anti-diabetic sulphonylurea that acts on K_ATP channels) on fatigued slow skeletal muscle, studying twitch and tetanus tension after inducing the muscle to fatigue by continuous electrical stimulation. Our results showed that glibenclamide (150 μM) increased post-fatigue twitch tension by about 25% with respect to the fatigued condition (P < 0.05). In addition, glibenclamide (150 μM) increased post-fatigue tetanic tension (83.61 ± 15.7% in peak tension, and 85.0 ± 19.0% in tension-time integral, P = 0.02, and 0.04, respectively; n = 3). Moreover, after exposing the muscle to a condition that inhibits mitochondrial ATP formation in order to activate K_ATP channels with cyanide (10 mM), tension also diminished, but in the presence of glibenclamide the effect produced by cyanide was abolished. To determine a possible increase in intracellular calcium concentration, the effects of glibenclamide on caffeine-evoked contractures were explored. After muscle pre-incubation with glibenclamide (150 μM), tension of caffeine-evoked contractures increased (6.5 ± 1.5% in maximal tension, and 5.9 ± 3.8% in tension-time integral, P < 0.05). These results suggest a possible role of K_ATP channels in the fatigue process, since glibenclamide increases twitch and tetanus tension in fatigued slow muscle of the chicken and during metabolic inhibition, possibly by increasing intracellular calcium.     

Rapid techniques for assessing fibre quality of flax breeding lines and cultivars using visible and near infrared spectroscopy, and thermal analysis

Fifteen different flax cultivars and breeding lines (E‐68, Baltu?iai, Belinka, Vega 2, Ilona, Elise, Kasty?iai, Evelin, 1963‐3, Ariane, Hermes, 01057‐12, 1698‐13a, 2017‐3, 1864‐24) were cultivated, harvested, water‐retted, scutched and resulting fibres passed through pin frames to produce representative samples for each variety. The aim of this investigation was to develop rapid techniques for assessing quality of fibre obtained from a comparative agronomical trial. The fibres produced were then assessed using visible and near infrared spectroscopy (Vis–NIRS), thermal analysis, scanning electron microscopy and airflow method for measuring fibre fineness. The relationships between agronomical characteristics, fibre fineness, thermal and spectral results were assessed using principal component analysis and partial least squares regression methods. The micrographs of the samples revealed the presence of residual pectic and cuticular tissues on all fibres, and significant differences between the 15 fibre samples were not observed. A significant relationship of the differences in fibre fineness of the test samples as measured by airflow method and Vis–NIR spectra was observed with an R² of 0.97 and standard error of calibration (SEC) of 1.69 dtex, and the former parameter also correlated with the measured thermal combustion parameters showing an R² of 0.91 and SEC of 2.86 dtex, indicating that the two rapid techniques could be used for the assessment of fibre quality of selected plants from the breeding programme. The advantages of using the two instrumental techniques compared with the existing airflow method are briefly discussed.     

Sarcomere lesion damage occurs mainly in slow fibers of reloaded rat adductor longus muscles

Sarcomerelesions were previously observed with reloading of rat adductor longusmuscles after spaceflight and hindlimb unloading (HU).Spaceflown rats displayed more lesioned fibers in the"slow-fiber" region, suggesting a damage-susceptible fiber type.Unloading induces fast myosin expression in some slow fibers,generating hybrid fibers. We examined whether lesion damage differedamong slow-, hybrid-, and fast-fiber types in HU-reloaded adductorlongus muscles. Temporal HU for 5, 8, 11, 14, and 17 days revealed that hybrid fiber percent, detected by antimyosin immunostaining, peaked at29 ± 12% by 14 days. A 14-day HU followed by 12-14 h ofvoluntary reloading was performed to induce lesions.² analysis showed that slowfibers were preferentially damaged, accounting for 92 ± 5% oflesioned fibers; hybrid and fast fibers accounted for 7 ± 4 and<0.5%, respectively. Atrophy did not explain differential lesiondamage across fiber types, as slow and hybrid fibers atrophied to asimilar extent. Because active myofiber contractions are requisite forlesion formation, selective recruitment of slow fibers most likelyexplains their damage susceptibility.

     

QTL alleles for improved fiber quality from a wild Hawaiian cotton, <Emphasis Type="Italic">Gossypium tomentosum</Emphasis>

Seventeen backcross-self families from crosses between two Gossypium hirsutum recurrent parent lines (CA3084, CA3093) and G. tomentosum were used to identify quantitative trait loci (QTLs) controlling fiber quality traits. A total of 28 QTLs for fiber quality traits were identified (P < 0.001), including four for fiber elongation, eight for fiber fineness, four for fiber length, four for fiber strength, six for fiber uniformity, one for boll weight, and one for boll number. Three statistically significant marker–trait associations for lint yield were found in a single environment, but need further validation. Two-way analysis of variance revealed one locus with significant genotype × family interaction (P < 0.001) for fiber strength and a second locus with significant genotype × environment interaction (P < 0.001) in the CA3084 background, and two loci with significant genotype × background interaction (P < 0.001) for the 28 common markers segregating in both of the two recurrent backgrounds. Co-location of many QTLs for fiber quality traits partially explained correlations among these traits. Some G. tomentosum alleles were associated with multiple favorable effects, offering the possibility of rapid genetic gain by introgression. Many G. tomentosum alleles were recalcitrant to homozygosity, suggesting that they might be most effectively deployed in hybrid cottons. DNA markers linked to G. tomentosum QTLs identified in the present study promise to assist breeders in transferring and maintaining valuable traits from this exotic source during Upland cotton cultivar development. This study also adds further evidence to prior studies indicating that the majority of genetic variation associated with fiber quality in tetraploid cotton traces to the D-subgenome from a diploid ancestor that does not produce spinnable fiber.     

Use of soybean vinasses as a germinant medium for a Geobacillus stearothermophilus ATCC 7953 sterilization biological indicator

A novel low-cost medium was developed from by-products and wastes from the ethanol agro-industry to replace commercial media in the production of a steam sterilization biological indicator (BI). Various recovery media were developed using soybean or sugarcane molasses and vinasse to prepare a self-contained BI. Media performance was evaluated by viability and heat resistance (D _121 °C value) according to regulatory standards. A medium produced with a soybean vinasse ratio of 1:70 (1.4%) (w/v) produced the results, with D _121 °C = 2.9 ± 0.5 min and Usk = 12.7 ± 2.1 min. The addition of 0.8% (w/v) yeast extract improved the germination of heat-damaged spores. The pH variation from 6.0 to 7.3 resulted in a gradual increase in the D _121 °C value. The absence of calcium chloride resulted in a decrease in germination, while no significant differences were observed with starch addition. Soybean vinasses may thus be used as the main component of a culture medium to substitute for commercial media in the production of self-contained biological indicators. The use of ethanol production waste in this biotechnological process realized a reliable performance, minimized the environmental impact, and decreased BI production costs while producing a high quality product.     

Maximal release of highly bifidogenic soluble dietary fibers from industrial potato pulp by minimal enzymatic treatment

Potato pulp is a poorly utilized, high-volume co-processing product resulting from industrial potato starch manufacturing. Potato pulp mainly consists of the tuber plant cell wall material and is particularly rich in pectin, notably galactan branched rhamnogalacturonan I type pectin which has previously been shown to exhibit promising properties as dietary fiber. The objective of this study was to solubilize dietary fibers from potato pulp by a one-step minimal treatment procedure and evaluate the prebiotic potential of the fibers. Statistically designed experiments were conducted to investigate the influence of enzyme type, dosage, substrate level, incubation time, and temperature on the enzyme catalyzed solubilization to define the optimal minimal enzyme treatment for maximal fiber solubilization. The result was a method that within 1 min released 75% [weight/weight (w/w)] dry matter from 1% (w/w) potato pulp treated with 1.0% (w/w) [enzyme/substrate (E/S)] pectin lyase from Aspergillus nidulans and 1.0% (w/w) E/S polygalacturonase from Aspergillus aculeatus at pH 6.0 and 60 °C. Molecular size fractionation of the solubilized fibers revealed two major fractions: one fraction rich in galacturonic acid of 10–100 kDa indicating mainly homogalacturonan, and a fraction >100 kDa rich in galactose, presumably mainly made up of β-1,4-galactan chains of rhamnogalacturonan I. When fermented in vitro by microbial communities derived from fecal samples from three healthy human volunteers, both of the solubilized fiber fractions were more bifidogenic than fructo-oligosaccharides (FOS). Notably the fibers having molecular masses of >100 kDa selectively increased the densities of Bifidobacterium spp. and Lactobacillus spp. 2–3 times more than FOS.     

Preparation of cross-linked carboxymethyl chitosan for repairing sciatic nerve injury in rats

A successful nerve regeneration process was achieved with nerve repair tubes made up of 1-ethyl-3(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) cross-linked carboxymethyl chitosan (CM-chitosan) with improved biodegradability. Chitosan has a very slow degradation rate, while the EDC cross-linked CM-chitosan tubes degraded to 30% of original weight during 8 weeks of incubation in lysozyme solution. In vitro cell culture indicated that the CM-chitosan films presented no cytotoxicity to Schwann cells. From in vivo studies using a 10 mm rat sciatic nerve defect model investigated by histomorphometry analysis, the average diameter of the fibers and the average thickness of myelin sheath in the CM-chitosan tubes were 3.7 ± 0.33 and 0.33 ± 0.04 μm, respectively, which demonstrated equivalence to nerve autografts (the current “gold” standard); furthermore, the average fiber density in the CM-chitosan tubes was 20.5 × 10³/mm², which was similar to that of autografts (21 × 10³/mm²) and significantly higher than that of common chitosan tubes (15.3 × 10³/mm²).     

The effects of agroforestry practices on fiber attributes in <Emphasis Type="Italic">Populus nigra</Emphasis> var. <Emphasis Type="Italic">betulifolia</Emphasis>

The effects of intercropping with alfalfa and initial tree spacing on fiber properties in Populus nigra var. betulifolia are reported on the basis of a study of 15 trees. The trees were harvested from an agroforestry trial near Karaj city, Iran. Treatments included four initial spacings of 3 m × 4 m, 3 m × 6.7 m, 3 m × 8 m, and 3 m × 10 m intercropped with alfalfa as nitrogen-fixing plant, as well as one 3 m × 4 m treatment without alfalfa. Results showed that initial spacing and intercropping with alfalfa increased the growth rate. Also, alfalfa-intercropping had increasing effects on all fiber dimensions, especially on diameter and wall thickness. The effect of initial spacing on fiber attributes based on ring numbers was not statistically significant; however, whole-disk fiber length, weighted by ring area, was increased with stem diameter. The reason for this increase may be traced to the fact that much of the basal area of fast-growing trees is concentrated in farther rings from the pith that have longer fibers. Clear correlation was not found between fiber length and growth rate and therefore, no firm conclusion can be made in this regard.     

Hypertrophic muscle fibers with fissures in power-lifters; fiber splitting or defect regeneration?

Power-lifters have hypertrophic muscle fibers with fissures seen in cross-sections, called as fiber splitting.Whether this phenomenon is due to real splitting or defective regeneration has not been settled. To elucidate this matter,we have examined biopsies from the trapezius and vastus lateralis of power lifters (P group) and power lifters self-administrating anabolic steroids (PAS group). For this purpose, immunohistochemical staining of serial cross -sections was used. The PAS group had significantly more fibers with fissures than the P group in the vastus lateralis (1.2%±0.95% vs 0.35±0.34, P<0.05) but not in the trapezius muscle (1.7% in both groups). Serial sections revealed that the fibers with fissures changed their profile profoundly over short distances. Some such fibers had a mature staining profile, whereas other fibers indicated recent degeneration and/or regeneration. Activation of satellite cells and formation of aberrant segments were also evident. We conclude that the so-called split fibers are due to defect regeneration. Some fibers with fissures are the results of old events of segmental muscle fiber damage, whereas the others reflect an ongoing process. The normal regenerative process is most likely disturbed in power-lifters by their continuous training with repeated high mechanical stress on the muscles.     

Elicitor-enhanced production of gymnemic acid in cell suspension cultures of <Emphasis Type="Italic">Gymnema sylvestre</Emphasis> R. Br.

Cell suspension cultures of Gymnema sylvestre treated with four different elicitors, methyl jasmonate (MJ), yeast extract, chitin and pectin were studied for the production of gymnemic acid as gymnemagenin equivalent, that was analyzed by high performance liquid chromatography (HPLC). All the four tested elicitors induced gymnemic acid production in cell suspension cultures. Highest gymnemic acid content was achieved following treatment with yeast extract (100.47 ± 0.28 mg/l), this was followed by MJ (70.43 ± 0.26 mg/l), pectin (64.19 ± 0.23 mg/l) and chitin (62.72 ± 0.13 mg/l). The addition of elicitors has shown a significant influence on cell growth that affected cell growth compared to respective controls. The highest gymnemic acid production was obtained after 20 days of elicitation in cultures treated with 0.5 g l^−l yeast extract, it was 5.25-folds greater than in control. These results suggest that the addition of an elicitor to Gymnema sylvestre cell suspension cultures could stimulate and enhance gymnemic acid production. In our present study we could able to overproduce gymnemic acid up to 51.97 ± 0.26 mg l^−l (dry weight basis) in yeast extract treated cell suspension cultures.     

Fungal pretreatment to enhance the yield of phytochemicals and evaluation of α-amylase and α-glucosidase inhibition using Cinnamomum zeylanicum (L.) quills pressurized water extracts

Bioactive compounds entrapped in plant materials can be effectively recovered using fungal enzymes. Cinnamomum zeylanicum Sri Wijaya (SW) and Sri Gemunu (SG) accessions and commercially available C. zeylanicum (CC) were subjected to fungal pretreatment and extracted with pressured water (PWE, 0·098 MPa). Thirteen fungal species were isolated and the substrate utilization ability of the species was tested using cellulose, pectin and lignin (indirectly). Total phenolic content (TPC, Folin–Ciocalteu method), proanthocyanidin content (PC, vanillin method) and α-amylase and α-glucosidase inhibitory potential of the extracts were evaluated. The anti-diabetic drug, Acarbose was used as the positive control. Trichoderma harzianum (MH298760) showed the highest cell lysis ability and hence was used for the microbial pretreatment process. Extracts of SW treated with T. harzianum species (Pre-SW) gave the highest percentage yield (4·08% ± 0·15%), significantly potent inhibition (P < 0·05) of α-amylase and α-glucosidase activities (IC₅₀ 57 ± 8 and 36 ± 8 μg ml⁻¹ respectively), TPC (2·24 ± 0·02 mg gallic acid equivalent g⁻¹), and PC (48·2 ± 0·4 mg of catechin equivalent g⁻¹) compared to Pre-SG, Pre-CC and nontreated samples. Trichoderma harzianum treatment can enhance the hypoglycaemic properties, PC and TPC of Cinnamon extracts and provide new insights into the recovery of phytochemicals.     

Crystal structure and characterization of esterase Est25 mutants reveal improved enantioselectivity toward (S)-ketoprofen ethyl ester

Esterases comprise a group of enzymes that catalyze the cleavage and synthesis of ester bonds. They are important in biotechnological applications owing to their enantioselectivity, regioselectivity, broad substrate specificity, and the fact that they do not require cofactors. In a previous study, we isolated the esterase Est25 from a metagenomic library. Est25 showed catalytic activity toward the (R,S)-ketoprofen ethyl ester but had low enantioselectivity toward the (S)-ketoprofen ethyl ester. Because (S)-ketoprofen has stronger anti-inflammatory effects and fewer side effects than (R)-ketoprofen, enantioselectivity of this esterase is important. In this study, we generated Est25 mutants with improved enantioselectivity toward the (S)-ketoprofen ethyl ester; improved enantioselectivity of mutants was established by analysis of their crystal structures. The enantioselectivity of mutants was influenced by substitution of Phe72 and Leu255. Substituting these residues changed the size of the binding pocket and the entrance hole that leads to the active site. The enantioselectivity of Est25 (E = 1.1 ± 0.0) was improved in the mutants F72G (E = 1.9 ± 0.2), L255W (E = 16.1 ± 1.1), and F72G/L255W (E = 60.1 ± 0.5). Finally, characterization of Est25 mutants was performed by determining the optimum reaction conditions, thermostability, effect of additives, and substrate specificity after substituting Phe72 and Leu255.

     

Suitability of bench scale bioreactor system for shoot biomass production and bacoside biosynthesis from Bacopa monnieri (L.)

According to folklore, Bacopa monnieri commonly called as Brahmi is known for its cognitive enhancing properties. The plant is found abundantly in wetlands but the drug content (bacosides) is very low (0.2%), therefore, alternative biotechnological protocols are highly needed to supplement the constant source of this valuable plant material which produces stable amounts of bacosides. The present study was conducted to explore the application of different culture systems for cultivation of shoot biomass and maximization of biologically active bacoside biosynthesis in this medicinally important plant. Shoot cultures of Bacopa were cultivated in two different modified benchtop bioreactors: glass bottle bioreactor and balloon type bubble bioreactor and compared with those grown in traditional Erlenmeyer agitated flask. The shoots cultivated in the balloon type bubble bioreactor system showed excellent growth (growth index 796.47 ± 17.27 fresh weight and 395.55 ± 7.55 dry weight) as compared to glass bottle bioreactor system (growth index 488.17 ± 14.4 fresh weight and 327.79 ± 6.64 dry weight) and agitated flask (growth index 363.43 ± 11 fresh weight and 304.22 ± 6.76 dry weight). Furthermore, bacosides produced by shoot cultures cultivated in the balloon type bubble bioreactor (321.95 ± 17.14 mg/L) and glass bottle bioreactor (180.18 ± 6.25 mg/L) configurations were ～2.78 fold and ～1.55 fold higher than that recorded in agitated flask cultures (115.7 ± 3.84 mg/L). The balloon type bubble bioreactor system was found to be advantageous for enhancing B. monnieri shoot biomass and bacoside biosynthesis along with ensuring a successful protocol for continuous supply.