A method for improving SELDI-TOF mass spectrometry data quality

Background  

Surface-enhanced laser desorption/ionization time-of-flight mass spectrometry (SELDI-TOF MS) is a powerful tool for rapidly generating high-throughput protein profiles from a large number of samples. However, the events that occur between the first and last sample run are likely to introduce technical variation in the results.     

Comparison of algorithms for pre-processing of SELDI-TOF mass spectrometry data

MOTIVATION: Surface-enhanced laser desorption and ionization (SELDI) time of flight (TOF) is a mass spectrometry technology. The key features in a mass spectrum are its peaks. In order to locate the peaks and quantify their intensities, several pre-processing steps are required. Though different approaches to perform pre-processing have been proposed, there is no systematic study that compares their performance. RESULTS: In this article, we present the results of a systematic comparison of various popular packages for pre-processing of SELDI-TOF data. We evaluate their performance in terms of two of their primary functions: peak detection and peak quantification. Regarding peak quantification, the performance of the algorithms is measured in terms of reproducibility. For peak detection, the comparison is based on sensitivity and false discovery rate. Our results show that for spectra generated with low laser intensity, the software developed by Ciphergen Biosystems (ProteinChip Software 3.1 with the additional tool Biomarker Wizard) produces relatively good results for both peak quantification and detection. On the other hand, for the data produced with either medium or high laser intensity, none of the methods show uniformly better performances under both criteria. Our analysis suggests that an advantageous combination is the use of the packages MassSpecWavelet and PROcess, the former for peak detection and the latter for peak quantification.     

Quadratic variance models for adaptively preprocessing SELDI-TOF mass spectrometry data

Background  

Surface enhanced laser desorption/ionization time-of-flight mass spectrometry (SELDI) is a proteomics tool for biomarker discovery and other high throughput applications. Previous studies have identified various areas for improvement in preprocessing algorithms used for protein peak detection. Bottom-up approaches to preprocessing that emphasize modeling SELDI data acquisition are promising avenues of research to find the needed improvements in reproducibility.     

SELDI-TOF mass spectrometry of High-Density Lipoprotein

Background  

High-Density Lipoprotein (HDL), one of the main plasma lipoproteins, serves as a docking station for proteins involved in inflammation, coagulation, and lipid metabolism.     

Nearline acquisition and processing of liquid chromatography-tandem mass spectrometry data

Liquid chromatography–mass spectrometry (LC–MS) is a commonly used analytical platform for non-targeted metabolite profiling experiments. Although data acquisition, processing and statistical analyses are almost routine in such experiments, further annotation and subsequent identification of chemical compounds are not. For identification, tandem mass spectra provide valuable information towards the structure of chemical compounds. These are typically acquired online, in data-dependent mode, or offline, using handcrafted acquisition methods and manually extracted from raw data. Here, we present several methods to fast-track and improve both the acquisition and processing of LC–MS/MS data. Our nearly online (nearline) data-dependent tandem MS strategy creates a minimal set of LC–MS/MS acquisition methods for relevant features revealed by a preceding non-targeted profiling experiment. Using different filtering criteria, such as intensity or ion type, the acquisition of irrelevant spectra is minimized. Afterwards, LC–MS/MS raw data are processed with feature detection and grouping algorithms. The extracted tandem mass spectra can be used for both library search and de-novo identification methods. The algorithms are implemented in the R package MetShot and support the export to Bruker, Agilent or Waters QTOF instruments and the vendor-independent TraML standard. We evaluate the performance of our workflow on a Bruker micrOTOF-Q by comparison of automatically acquired and extracted tandem mass spectra obtained from a mixture of natural product standards against manually extracted reference spectra. Using Arabidopsis thaliana wild-type and biosynthetic gene knockout plants, we characterize the metabolic products of a biosynthetic pathway and demonstrate the integration of our approach into a typical non-targeted metabolite profiling workflow.     

Nearline acquisition and processing of liquid chromatography-tandem mass spectrometry data

Liquid chromatography–mass spectrometry (LC–MS) is a commonly used analytical platform for non-targeted metabolite profiling experiments. Although data acquisition, processing and statistical analyses are almost routine in such experiments, further annotation and subsequent identification of chemical compounds are not. For identification, tandem mass spectra provide valuable information towards the structure of chemical compounds. These are typically acquired online, in data-dependent mode, or offline, using handcrafted acquisition methods and manually extracted from raw data. Here, we present several methods to fast-track and improve both the acquisition and processing of LC–MS/MS data. Our nearly online (nearline) data-dependent tandem MS strategy creates a minimal set of LC–MS/MS acquisition methods for relevant features revealed by a preceding non-targeted profiling experiment. Using different filtering criteria, such as intensity or ion type, the acquisition of irrelevant spectra is minimized. Afterwards, LC–MS/MS raw data are processed with feature detection and grouping algorithms. The extracted tandem mass spectra can be used for both library search and de-novo identification methods. The algorithms are implemented in the R package MetShot and support the export to Bruker, Agilent or Waters QTOF instruments and the vendor-independent TraML standard. We evaluate the performance of our workflow on a Bruker micrOTOF-Q by comparison of automatically acquired and extracted tandem mass spectra obtained from a mixture of natural product standards against manually extracted reference spectra. Using Arabidopsis thaliana wild-type and biosynthetic gene knockout plants, we characterize the metabolic products of a biosynthetic pathway and demonstrate the integration of our approach into a typical non-targeted metabolite profiling workflow.

     

Nonredundant mass spectrometry: a strategy to integrate mass spectrometry acquisition and analysis

Protein identification using automated data-dependent tandem mass spectrometry (MS/MS) is now a standard procedure. However, in many cases data-dependent acquisition becomes redundant acquisition as many different peptides from the same protein are fragmented, whilst only a few are needed for unambiguous identification. To increase the quality of information but decrease the amount of information, a nonredundant MS (nrMS) strategy has been developed. With nrMS, data analysis is an integral part of the overall MS acquisition and analysis, and not an endpoint as typically performed. In this nrMS workflow a matrix assisted laser desorption/ionization-time of flight-time of flight (MALDI-TOF/TOF) instrument is used. MS and restricted MS/MS data are searched and identified proteins are used to generate an "exclusion list", after in silico digestion. Peptide fragmentation is then restricted to only the most intense ions not present in the exclusion list. This process is repeated until all peaks are accounted for or the sample is consumed. Compared to nanoLC-MS/MS, nrMS yielded similar results for the analysis of six pooled two-dimensional electrophoresis (2-DE) spots. In comparison to standard data-dependent MALDI-MS/MS for sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gel band analysis, nrMS dramatically increased the number of identified proteins. It was also found that this new workflow significantly increased sequence coverage by identifying unexpected peptides, which can result from post-translational modifications.     

Key issues in the acquisition and analysis of qualitative and quantitative mass spectrometry data for peptide-centric proteomic experiments

Proteomic technologies have matured to a level enabling accurate and reproducible quantitation of peptides and proteins from complex biological matrices. Analysis of samples as diverse as assembled protein complexes, whole cell lysates or sub-cellular proteomes from cell cultures, and direct analysis of animal and human tissues and fluids demonstrate the incredible versatility of the fundamental nature of the technique that forms the basis of most proteomic applications today (mass spectrometry). Determining the mass of biomolecules and their fragments or related products with high accuracy can convey a highly specific assay for detection and identification. Importantly, ion currents representative of these specifically identified analytes can be accurately quantified with the correct application of smart isobaric tagging chemistries, heavy and light isotopically derivatised samples or standards, or by careful application of workflows to compare unlabelled samples in so-called 'label-free' and targeted selected reaction monitoring experiments. In terms of exploring biology, a myriad of protein changes and modifications are being increasingly probed and quantified, including diverse chemical changes from relatively decisive modifications such as protein splicing and truncation, to more transient dynamic modifications such as phosphorylation, acetylation and ubiquitination. Proteomic workflows can be complex beasts and several key considerations to ensure effective applications have been outlined in the recent literature. The past year has witnessed the publication of several excellent reviews that thoroughly describe the fundamental principles underlying the state of the art. This review further elaborates on specific critical issues introduced by these publications and raises other important unaddressed considerations and new developments that directly impact on the effectiveness of proteomic technologies, in particular for, but not necessarily exclusive to peptide-centric experiments. These factors are discussed both in terms of qualitative analyses, including dynamic range and sampling issues, and developments to improve the translation of peptide fragmentation data into peptide and protein identities, as well as quantitative analyses, including data normalisation and the utility of ontology or functional annotation, the effects of modified peptides, and considered experimental design to facilitate the use of robust statistical methods.     

The application of SELDI-TOF mass spectrometry to mammalian cell culture

Surface Enhanced Laser Desorption/Ionisation Time-of-Fight Mass Spectrometry (SELDI-TOF MS) is a technique by which protein profiles can be rapidly produced from a wide variety of biological samples. By employing chromatographic surfaces combined with the specificity and reproducibility of mass spectrometry it has allowed for profiles from complex biological samples to be analysed. Profiling and biomarker identification have been employed widely throughout the biological sciences. To date, however, the benefits of SELDI-TOF MS have not been realised in the area of mammalian cell culture. The advantages in identifying markers for cell stresses, apoptosis and other culture parameters mean that these tools could help greatly to enhance monitoring and control of bioreaction process and improve the production of therapeutics. Better characterisation of culture systems through proteome analysis will allow for improved productivity and better yields.     

Algorithms and tools for analysis and management of mass spectrometry data

Mass spectrometry (MS) is a technique that is used for biological studies. It consists in associating a spectrum to a biological sample. A spectrum consists of couples of values (intensity, m/z), where intensity measures the abundance of biomolecules (as proteins) with a mass-to-charge ratio (m/z) present in the originating sample. In proteomics experiments, MS spectra are used to identify pattern expressions in clinical samples that may be responsible of diseases. Recently, to improve the identification of peptides/proteins related to patterns, MS/MS process is used, consisting in performing cascade of mass spectrometric analysis on selected peaks. Latter technique has been demonstrated to improve the identification and quantification of proteins/peptide in samples. Nevertheless, MS analysis deals with a huge amount of data, often affected by noises, thus requiring automatic data management systems. Tools have been developed and most of the time furnished with the instruments allowing: (i) spectra analysis and visualization, (ii) pattern recognition, (iii) protein databases querying, (iv) peptides/proteins quantification and identification. Currently most of the tools supporting such phases need to be optimized to improve the protein (and their functionalities) identification processes. In this article we survey on applications supporting spectrometrists and biologists in obtaining information from biological samples, analyzing available software for different phases. We consider different mass spectrometry techniques, and thus different requirements. We focus on tools for (i) data preprocessing, allowing to prepare results obtained from spectrometers to be analyzed; (ii) spectra analysis, representation and mining, aimed to identify common and/or hidden patterns in spectra sets or in classifying data; (iii) databases querying to identify peptides; and (iv) improving and boosting the identification and quantification of selected peaks. We trace some open problems and report on requirements that represent new challenges for bioinformatics.     

Bioinformatics in mass spectrometry data analysis for proteomics studies

Mass spectrometry is a technique widely employed for the identification and characterization of proteins. The role of bioinformatics is fundamental for the elaboration of mass spectrometry data due to the amount of data that this technique can produce. To process data efficiently, new software packages and algorithms are continuously being developed to improve protein identification and characterization in terms of high-throughput and statistical accuracy. However, many limitations exist concerning bioinformatics spectral data elaboration. This review aims to critically cover the recent and future developments of new bioinformatics approaches in mass spectrometry data analysis for proteomics studies.     

Bioinformatics in mass spectrometry data analysis for proteomics studies

Mass spectrometry is a technique widely employed for the identification and characterization of proteins. The role of bioinformatics is fundamental for the elaboration of mass spectrometry data due to the amount of data that this technique can produce. To process data efficiently, new software packages and algorithms are continuously being developed to improve protein identification and characterization in terms of high-throughput and statistical accuracy. However, many limitations exist concerning bioinformatics spectral data elaboration. This review aims to critically cover the recent and future developments of new bioinformatics approaches in mass spectrometry data analysis for proteomics studies.     

Computational and statistical analysis of protein mass spectrometry data

High-throughput proteomics experiments involving tandem mass spectrometry produce large volumes of complex data that require sophisticated computational analyses. As such, the field offers many challenges for computational biologists. In this article, we briefly introduce some of the core computational and statistical problems in the field and then describe a variety of outstanding problems that readers of PLoS Computational Biology might be able to help solve.     

mzServer: web-based programmatic access for mass spectrometry data analysis

Continued progress toward systematic generation of large-scale and comprehensive proteomics data in the context of biomedical research will create project-level data sets of unprecedented size and ultimately overwhelm current practices for results validation that are based on distribution of native or surrogate mass spectrometry files. Moreover, the majority of proteomics studies leverage discovery-mode MS/MS analyses, rendering associated data-reduction efforts incomplete at best, and essentially ensuring future demand for re-analysis of data as new biological and technical information become available. Based on these observations, we propose to move beyond the sharing of interpreted spectra, or even the distribution of data at the individual file or project level, to a system much like that used in high-energy physics and astronomy, whereby raw data are made programmatically accessible at the site of acquisition. Toward this end we have developed a web-based server (mzServer), which exposes our common API (mzAPI) through very intuitive (RESTful) uniform resource locators (URL) and provides remote data access and analysis capabilities to the research community. Our prototype mzServer provides a model for lab-based and community-wide data access and analysis.     

swissPIT: a novel approach for pipelined analysis of mass spectrometry data

The identification and characterization of peptides from tandem mass spectrometry (MS/MS) data represents a critical aspect of proteomics. Today, tandem MS analysis is often performed by only using a single identification program achieving identification rates between 10-50% (Elias and Gygi, 2007). Beside the development of new analysis tools, recent publications describe also the pipelining of different search programs to increase the identification rate (Hartler et al., 2007; Keller et al., 2005). The Swiss Protein Identification Toolbox (swissPIT) follows this approach, but goes a step further by providing the user an expandable multi-tool platform capable of executing workflows to analyze tandem MS-based data. One of the major problems in proteomics is the absent of standardized workflows to analyze the produced data. This includes the pre-processing part as well as the final identification of peptides and proteins. The main idea of swissPIT is not only the usage of different identification tool in parallel, but also the meaningful concatenation of different identification strategies at the same time. The swissPIT is open source software but we also provide a user-friendly web platform, which demonstrates the capabilities of our software and which is available at http://swisspit.cscs.ch upon request for account.     

Comparison of public peak detection algorithms for MALDI mass spectrometry data analysis

Background  

In mass spectrometry (MS) based proteomic data analysis, peak detection is an essential step for subsequent analysis. Recently, there has been significant progress in the development of various peak detection algorithms. However, neither a comprehensive survey nor an experimental comparison of these algorithms is yet available. The main objective of this paper is to provide such a survey and to compare the performance of single spectrum based peak detection methods.     

Recent developments in data acquisition,treatment and analysis with ion mobility-mass spectrometry for lipidomics

Lipids are involved in many biological processes and their study is constantly increasing. To identify a lipid among thousand requires of reliable methods and techniques. Ion Mobility (IM) can be coupled with Mass Spectrometry (MS) to increase analytical selectivity in lipid analysis of lipids. IM-MS has experienced an enormous development in several aspects, including instrumentation, sensitivity, amount of information collected and lipid identification capabilities. This review summarizes the latest developments in IM-MS analyses for lipidomics and focuses on the current acquisition modes in IM-MS, the approaches for the pre-treatment of the acquired data and the subsequent data analysis. Methods and tools for the calculation of Collision Cross Section (CCS) values of analytes are also reviewed. CCS values are commonly studied to support the identification of lipids, providing a quasi-orthogonal property that increases the confidence level in the annotation of compounds and can be matched in CCS databases. The information contained in this review might be of help to new users of IM-MS to decide the adequate instrumentation and software to perform IM-MS experiments for lipid analyses, but also for other experienced researchers that can reconsider their routines and protocols.     

Multivariate denoising methods combining wavelets and principal component analysis for mass spectrometry data

The identification of new diagnostic or prognostic biomarkers is one of the main aims of clinical cancer research. In recent years, there has been a growing interest in using mass spectrometry for the detection of such biomarkers. The MS signal resulting from MALDI‐TOF measurements is contaminated by different sources of technical variations that can be removed by a prior pre‐processing step. In particular, denoising makes it possible to remove the random noise contained in the signal. Wavelet methodology associated with thresholding is usually used for this purpose. In this study, we adapted two multivariate denoising methods that combine wavelets and PCA to MS data. The objective was to obtain better denoising of the data so as to extract the meaningful proteomic biological information from the raw spectra and reach meaningful clinical conclusions. The proposed methods were evaluated and compared with the classical soft thresholding denoising method using both real and simulated data sets. It was shown that taking into account common structures of the signals by adding a dimension reduction step on approximation coefficients through PCA provided more effective denoising when combined with soft thresholding on detail coefficients.