首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Effects of immobilization pH and pore characters of mesoporous silicas (MPSs), MCM-41, SBA-15, and MCF, were simultaneously investigated for the immobilization of horseradish peroxidase (HRP; EC 1.11.1.7). MCM-41 and SBA-15 were rod-like with respective average pore diameters of 32, and 54 Å, while that of MCF with spherical cell and frame structure was 148 Å. Moreover, the MPSs synthesized were of identical surface functional groups and similar contents of free silanol groups. At immobilization pH 6 and 8 almost 100% HRP loadings were obtained and insignificant leaching were observed for all types of supports at pH 6. However, MCF was found to give both the highest enzyme loading and leaching at pH 10. Maximum and minimum HRP activities were obtained at respective immobilization pH 8, and 6. Activities of immobilized HRP increased with support pore diameters in the order: MCM-41 < SBA-15 < MCF. HRP immobilized at pH 8 gave the highest storage stability (both at 4 °C and room temperature), and in opposition to pH 6. In addition, HRP immobilized in MCF was found to be the most stable under storage. The finding should be useful for the creation of biocatalysts and biosensors.  相似文献   

2.
By a dealloying/annealing/redealloying strategy, nanoporous gold (NPG) with hierarchical microstructure is fabricated for electrochemical biosensing application. The first dealloying and annealing would produce NPG/AuAg alloy composite with a large-pore NPG layer and the second dealloying would further etch the AuAg alloy part in the composite, generating a small-pore NPG layer. By using the large-pore (≈ 100 nm) layer as the glucose oxidase (GOx) container, and the small-pore (≈ 12 nm) layer as a signal producer, this novel hierarchical NPG is demonstrated to be a good support for enzyme immobilization and fabricating enzyme-based biosensors. The immobilized GOx retains ≈ 92% of the initial activity after 7 repeated use. The GOx-loaded stratified NPG biosensor can detect glucose more sensitively with a wider linear range (up to 22 mM) than normal NPG with a uniform pore size of 30-40 nm (linear range: up to 17 mM).  相似文献   

3.
The immobilization of enzymes in inorganic materials has been widely used because it can produce an enhancement of the catalytic stability and enzymatic activity. In this article, the effect of the immobilization of iso-1-cytochrome c (CYC-Sc) from Saccharomyces cerevisiae and chloroperoxidase (CPO) from Caldariomyces fumago on the enzyme stability and catalytic oxidation of styrene was studied. The immobilization was carried out in three silica nanostructured supports with different pore size MCM-41 (3.3 nm), SBA-15 (6.4 nm) and MCF (12.1 nm). The adsorption parameters and leaching degree of immobilized enzymes were determined. Catalytic parameters of immobilized and free enzymes were determined at different temperatures (20–60 °C) and in different acetonitrile/water mixtures (15–85% of acetonitrile). The results show that there is low leaching of the enzymes in the three supports assayed and the adsorption capacity (qmax) was higher as the pore size of the support increased. The pore size also produces the enhancement of peroxidase activities on the styrene oxidation. Thus, CPO adsorption into SBA-15 and MCF showed remarkable thermal and solvent stabilities at 40 °C showing a total turnover numbers of 48,000 and 54,000 times higher than free CPO, respectively. The enhancement of activity and stability doubtless is interesting for the potential industrial use of peroxidases.  相似文献   

4.
A highly stable functional composite film was prepared using polyazetidine prepolymer (PAP) with peroxidase from horseradish (HRP) and/or glucose oxidase (GOx). The good permeability of the PAP layer to classical electrochemical mediators, as evaluated by the determination of the diffusion coefficient of different redox molecules, is of great importance in view of the use of PAP as an immobilizing agent in second-generation biosensor development. Cyclic voltammetry of the HRP-PAP layer on a glassy carbon electrode (GCE) showed a pair of stable and quasi-reversible peaks for the HRP-Fe((III))/Fe((II)) redox couple at about -370 mV vs. Ag/AgCl electrode in pH 6.5 phosphate buffer. The electrochemical reaction of HRP entrapped in the PAP film exhibited a surface-controlled electrode process. This film and the successive modifications (HRP-PAP self-assembled monolayer (SAM) modified Au electrode) were used as a biological catalyst (hydrogen peroxide transducers) for glucose biosensors, after coupling to GOx. Both HRP/GOx-PAP and HRP/GOx-PAP SAM third generation biosensors were prepared and characterized. The use of PAP as immobilizing agent offers a biocompatible micro-environment for confining the enzyme and foreshadows the great potentiality of this immobilizing agent not only in theoretical studies on protein direct electron transfer but also from an applications point of view in the development of second- and third-generation biosensors.  相似文献   

5.
Soybean hull peroxidase (SHP, E.C. 1.11.1.7) was immobilized by a glutaraldehyde and periodate method onto series of macroporous copolymers of glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA), poly(GMA-co-EGDMA) with various surface characteristics and pore size diameters ranging from 44 to 200 nm. Glutaraldehyde immobilization method and poly(GMA-co-EGDMA) named SGE 20/12 with pore sizes of 120 nm gave immobilized enzyme with highest specific activity of 25 U/g. Deactivation studies showed that immobilization increased stability of SHP and that surface characteristics of the used copolymer had a major influence on a stability of immobilized enzyme at high temperatures and in an organic solvent. The highest thermostability was obtained using the copolymer SGE 20/12 with pore size of 120 nm, while the highest stability in dioxane had SHP immobilized onto copolymer SGE 10/4 with pore size of 44 nm. Immobilized SHP showed a wider pH optimum as compared to the native enzyme especially at alkaline pH values and 3.2 times increased K m value for pyrogallol. After 6 cycles of repeated use in batch reactor, immobilized SHP retained 25 % of its original activity. Macroporous copolymers with different surface characteristics can be used for fine tuning of activity and stability of immobilized SHP to obtain a biocatalyst suitable for phenol oxidation or polymer synthesis in organic solvents.  相似文献   

6.
We determined the effects of grain size and nutritional conditions on the penetration rate and metabolic activity of Escherichia coli strains in anaerobic, nutrient-saturated chambers packed with different sizes of glass beads (diameters, 116 to 767 μm) under static conditions. The chambers had nearly equal porosities (38%) but different calculated pore sizes (range, 10 to 65 μm). Motile strains always penetrated faster than nonmotile strains, and nutrient conditions that resulted in faster growth rates (fermentative conditions versus nitrate-respiring conditions) resulted in faster penetration rates for both motile and nonmotile strains for all of the bead sizes tested. The penetration rate of nonmotile strains increased linearly when bead size was increased, while the penetration rate of motile strains became independent of the bead size when beads having diameters of 398 μm or greater were used. The rate of H2 production and the final amount of H2 produced decreased when bead size was decreased. However, the final protein concentrations were similar in chambers packed with 116-, 192-, and 281-μm beads and were only slightly higher in chambers packed with 398- and 767-μm beads. Our data indicated that conditions that favored faster growth rates also resulted in faster penetration times and that the lower penetration rates observed in chambers packed with small beads were due to restriction of bacterial activity in the small pores. The large increases in the final amount of hydrogen produced without corresponding increases in the final amount of protein made indicated that metabolism became uncoupled from cell mass biosynthesis as bead size increased, suggesting that pore size influenced the efficiency of substrate utilization.  相似文献   

7.
The encapsulation of enzymes in microenvironments and especially in liposomes, has proven to greatly improve enzyme stabilization against unfolding, denaturation and dilution effects. Combining this stabilization effect, with the fact that liposomes are optically translucent, we have designed nano-sized spherical biosensors. In this work liposome-based biosensors are prepared by encapsulating the enzyme acetylcholinesterase (AChE) in L-a phosphatidylcholine liposomes resulting in spherical optical biosensors with an average diameter of 300+/-4 nm. Porins are embedded into the lipid membrane, allowing for the free substrate transport, but not that of the enzyme due to size limitations. The enzyme activity within the liposome is monitored using pyranine, a fluorescent pH indicator. The response of the liposome biosensor to the substrate acetylthiocholine chloride is relatively fast and reproducible, while the system is stable as has been shown by immobilization within sol-gel.  相似文献   

8.
We describe the fabrication of poly(ethylene glycol) diacrylate (PEG-DA) hydrogel microstructures with a high aspect ratio and the use of hydrogel microstructures containing the enzyme beta-galactosidase (beta-Gal) or glucose oxidase (GOx)/horseradish peroxidase (HRP) as biosensing components for the simultaneous detection of multiple analytes. The diameters of the hydrogel microstructures were almost the same at the top and at the bottom, indicating that no differential curing occurred through the thickness of the hydrogel microstructure. Using the hydrogel microstructures as microreactors, beta-Gal or GOx/HRP was trapped in the hydrogel array, and the time-dependent fluorescence intensities of the hydrogel array were investigated to determine the dynamic uptake of substrates into the PEG-DA hydrogel. The time required to reach steady-state fluorescence by glucose diffusing into the hydrogel and its enzymatic reactions with GOx and HRP was half the time required for resorufin beta-D-galactopyranoside (RGB) when used as the substrate for beta-Gal. Spatially addressed hydrogel microarrays containing different enzymes were micropatterned for the simultaneous detection of multiple analytes, and glucose and RGB solutions were incubated as substrates. These results indicate that there was no cross-talk between the beta-Gal-immobilizing hydrogel micropatches and the GOx/HRP-immobilizing micropatches.  相似文献   

9.
A new enzymatic glucose biosensor based on reversible co‐immobilization of horseradish peroxidase (HRP) and glucose oxidase (GOx) on a pH‐responsive imprinted monolith is prepared. The poly(4‐vinylphenylboronic acid)‐grafted imprinted polymer using HRP as a template is formed via surface initiated atom transfer radical polymerization within the pores of brominated poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) macroporous monolith contained in a 100 μm I.D. capillary column. The two enzymes conjugate is formed via the strong affinity interaction between biotin‐labeled GOx and streptavidin‐labeled HRP. The modulation of the external pH value enables reusability of the biosensor simply using stripping of the inactive enzymes at a low pH value and subsequent immobilization of fresh enzymes at a high pH value. Under the optimized conditions, the enzymatic biosensor features excellent performance in detection of glucose with a linear range of its concentration from 0.11 to 38.85 mmol/L and a limit of detection of 0.03 mmol/L. A relative standard deviation of 3.7% is calculated from determination of twenty glucose samples. This novel enzymatic sensing system is successfully applied for determination of glucose in human serum, and confirms an enhancement both in selectivity and specificity compared to the more traditionally clinical methods.  相似文献   

10.
An extracellular proteinase from Thermus strain Rt41A was immobilized to controlled pore glass (CPG) beads. The properties of the free and CPG-immobilized enzymes were compared using both a large (azocasein) and a small (peptidase) substrate. The specific activity of the immobilized proteinase was 5284 azoU/mg with azocasein and 144 sucU/mg for SucAAPFpNA. The percentage recovery of enzyme activity was unaffected by pore size when it was immobilized at a fixed level of activity/g of beads, whereas it increased with increasing pore size when added at a fixed level/m(2) of support. Saturation of the CPG beads was observed at 540 azoU/m(2) of 105-nm beads. Lower levels (50 azoU/m(2) of 50-nm beads) were used in characterization experiments. The pH optimum of the immobilized Rt41A proteinase was 8.0 for azocasein and 9.5 for SucAAPFpNA, compared with the free proteinase which was 10.5 for both substrates. The immobilized enzyme retained 65% of its maximum activity against azocasein at pH 12, whereas the free proteinase retained less than 10% under the same conditions. Stability at 80 degrees C increased on immobilization at all pH values between 5 and 11, the greatest increase in half-life being approximately 12-fold at pH 7.0. Temperature-activity profiles for both the free and immobilized enzymes were similar for both substrates. The stability of the immobilized proteinase, however, was higher than that of the free enzyme in the absence and presence of CaCl(2). Overall, the results show that low levels of calcium (10 muM) protect against thermal denaturation, but that high calcium or immobilization are required to protect against autolysis. (c) 1994 John Wiley & Sons, Inc.  相似文献   

11.
Adsorption of β-glucosidase from almonds, an enzyme with big molecular size (130?kDa, 6.7?nm molecular diameter), on mesoporous SBA-15 silica in fixed bed column was studied. Previously, zeta potential analysis confirmed that the electrostatic interactions between β-glucosidase and SBA-15 were the driving force of the immobilization process. The maximum difference in the zeta potential was 25?mV at pH 3.5. Adsorption isotherm was classified as an L3 (Langmuir type 3) curve according to the Giles classification and fitted to a double Langmuir equation. The adsorbed amount in a fixed bed column was around 3.5 times higher than the amount reached in the adsorption in batch. In addition, the β-glucosidase was strongly immobilized on SBA-15 with only 7?% of leaching in the washing step with buffer solution. Immobilized β-glucosidase was catalytically active in a continuous process, reaching 100?% substrate conversion and maintaining this activity level for more than 10?h without deactivation of the enzyme. Adsorption-desorption isotherms at 77?K before and after the adsorption were carried out, concluding that the adsorption of β-glucosidase was produced blocking the pore mouth, so that a part of the enzyme penetrates inside and another part stays outside the pore.  相似文献   

12.
The aim of this study was to formulate silica and alginate hydrogels for immobilization of β‐glucosidase. For this purpose, enzyme kinetics in hydrogels were determined, activity of immobilized enzymes was compared with that of free enzyme, and structures of silica and alginate hydrogels were characterized in terms of surface area and pore size. The addition of polyethylene oxide improved the mechanical strength of the silica gels and 68% of the initial activity of the enzyme was preserved after immobilizing into tetraethyl orthosilicate–polyethylene oxide matrix where the relative activity in alginate beads was 87%. The immobilized β‐glucosidase was loaded into glass–silicon–glass microreactors and catalysis of 4‐nitrophenyl β‐d ‐glucopyranoside was carried out at various retention times (5, 10, and 15 min) to compare the performance of silica and alginate hydrogels as immobilization matrices. The results indicated that alginate hydrogels exhibited slightly better properties than silica, which can be utilized for biocatalysis in microfluidic platforms.  相似文献   

13.
We have used electron microscopy to measure quantitatively the morphology of electrical synapses in a circuit that has been proposed to account for the positional discrimination of the leech. Injection of a presynaptic nociceptive sensory neuron and the postsynaptic anterior pagoda neuron with HRP showed gap junctions in the neuropil. After double labeling, La3+-treated ganglia revealed labeled gap junctions from 2.0 to 3.5 nm wide. Between the labeled axon terminals, there were innexons with diameters of 8 to 10 nm. The innexon's central pore diameter was 2 nm, and the mean of the center-to-center distance between two innexons was 30 nm. Except for the gap junction areas of nociceptive sensory neuron axon terminals, the other ultrastructural parameters measured by freeze fracture were similar to those of samples labeled with HRP and filled with La3+. These data suggested that the gap width, innexon diameter, and its central pore do not on their own account for the mechanism of positional discrimination, which may depend rather on the differences in distribution and number of gap junctions. Electronic Publication  相似文献   

14.
This work presents a novel, miniature optical biosensor by immobilizing horseradish peroxidase (HRP) or the HRP/glucose oxidase (GOx) coupled enzyme pair on a CMOS photosensing chip with a detection area of 0.5 mm × 0.5 mm. A highly transparent TEOS/PDMS Ormosil is used to encapsulate and immobilize enzymes on the surface of the photosensor. Interestingly, HRP-catalyzed luminol luminescence can be detected in real time on optical H2O2 and glucose biosensors. The minimum reaction volume of the developed optical biosensors is 10 μL. Both optical H2O2 and glucose biosensors have an optimal operation temperature and pH of 20–25 °C and pH 8.4, respectively. The linear dynamic range of optical H2O2 and glucose biosensors is 0.05–20 mM H2O2 and 0.5–20 mM glucose, respectively. The miniature optical glucose biosensor also exhibits good reproducibility with a relative standard deviation of 4.3%. Additionally, ascorbic acid and uric acid, two major interfering substances in the serum during electrochemical analysis, cause only slight interference with the fabricated optical glucose biosensor. In conclusion, the CMOS-photodiode-based optical biosensors proposed herein have many advantages, such as a short detection time, a small sample volume requirement, high reproducibility and wide dynamic range.  相似文献   

15.
The enzymes acetate kinase (ATP: acetate phosphotransferase, EC 2.7.2.1) and phosphotransacetylase (acetyl coenzyme A: orthophosphate acetyltransferase, EC 2.3.1.8) were separately immobilized onto controlled pore glass CPG and silica beads (pore size 50 nm). Different coupling techniques were screened and immobilized enzymes were subjected to storage stability tests. The selected method, the CPG γ-aminopropyl glutaraldehyde succinate dihydrazide, was further optimized to improve the activity of the enzyme-loaded glass beads.  相似文献   

16.
The enzyme acetylcoenzyme A synthetase (acetate-CoA ligase (AMP forming), EC 6.2.1.1) from Saccharomyces cerevisiae (baker's yeast) is used for the synthesis of 1 mumol [11C]acetylcoenzyme A. (CoA-[11C]Ac). A screening of the immobilization of the enzyme on differently derivatized controlled pore glass beads (50 nm pore size and 125-180 micron particle size) was performed. Several silanes, spacer arms and terminal reactive groups were tested. The immobilized enzyme was subjected to storage stability tests. From these experiments, the method of choice was selected: immobilization on CNBr-activated controlled pore glass. The immobilized parameters were optimized further to improve the activity of the enzyme-loaded glass beads. The latter were packed in a glass column. The kinetic properties of the column were investigated and optimized to obtain an almost complete conversion of 1 mumol acetate into acetylcoenzyme A (CoA-Ac) within a few minutes. This is realized with an enzyme reactor (13.0 x 0.5 cm) containing 6.12 U active acetylcoenzyme A synthetase immobilized onto 1 g controlled pore glass.  相似文献   

17.
The development of a new electrochemical sensor consisting in a glass-sealed metal microelectrode coated by a polyethylenimine film is described. The use of polymers as the entrapping matrix for enzymes fulfils all the requirements expected for these materials without damaging the biological material. Since enzyme immobilization plays a fundamental role in the performance characteristics of enzymatic biosensors, we have tested four different protocols for enzyme immobilization to determine the most reliable one. Thus the characteristics of the potentiometric biosensors assembled were studied and compared and it appeared that the immobilization method leading to the most efficient biosensors was the one consisting in a physical adsorption followed by reticulation with dilute aqueous glutaraldehyde solutions. Indeed, the glutaraldehyde immobilized urease sensor provides many advantages, compared to the other types of sensors, since this type of urea biosensor exhibits short response times (15–30 s), sigmoidal responses for the urea concentration working range from 1×10−2.5 to 1×10−1.5 M and a lifetime of 4 weeks.  相似文献   

18.
A highly sensitive electrochemical glucose sensor has been developed by the co-immobilization of glucose oxidase (GOx) and horseradish peroxidase (HRP) onto a gold electrode modified with biocompatible cyclic bisureas–gold nanoparticle conjugate (CBU–AuNP). A self-assembled monolayer of mercaptopropionic acid (MPA) and CBU–AuNP was formed on the gold electrode through a layer-by-layer assembly. This modified electrode was used for immobilization of the enzymes GOx and HRP. Both the HRP and GOx retained their catalytic activity for an extended time, as indicated by the low value of Michaelis–Menten constant. Analytical performance of the sensor was examined in terms of sensitivity, selectivity, reproducibility, lower detection limit, and stability. The developed sensor surface exhibited a limit of detection of 100 nM with a linear range of 100 nM to 1 mM. A high sensitivity of 217.5 μA mM−1 cm−2 at a low potential of −0.3 V was obtained in this sensor design. Various kinetic parameters were calculated. The sensor was examined for its practical clinical application by estimating glucose in human blood sample.  相似文献   

19.
The enzyme arylamine acetyltransferase (acetyl-CoA:arylamine N-acetyltransferase, EC 2.3.1.5) from pigeon liver is immobilized onto differently derivatized controlled pore glass beads. Different silanes, spacer arms and reactive end-groups were tested, and immobilized enzyme stability tests were performed. From these experiments, the method of choice was selected: immobilization on controlled pore glass beads (24 nm pore size, 75-125 microns particle size) derivatized with gamma-aminopropyl and glutaraldehyde as the reactive end group. The kinetic properties of an enzyme reactor were investigated and optimized. The goal was to obtain a rapid high-yield conversion of 0.5-1 mumol acetyl-CoA to N-acetylserotonin, so that the reactor is useful for the 11C-labelling of N-acetylserotonin. Using an enzyme reactor (9.8 x 0.5 cm i.d.) containing 4.6 U active arylamine acetyltransferase immobilized onto 930 mg carrier, a 70% conversion of acetyl-CoA was obtained within 4 min.  相似文献   

20.
Positively charged Ni-Al layered double hydroxide nanosheets (Ni-Al LDHNS) have been used for the first time as matrices for immobilization of horseradish peroxidase (HRP) in order to fabricate enzyme electrodes for the purpose of studying direct electron transfer between the redox centers of proteins and underlying electrodes. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) revealed that the HRP-Ni-Al LDHNS film had an ordered structure and that HRP was intercalated into Ni-Al LDHNS with a monolayer arrangement. Field emission scanning electron microscopy (FESEM) showed that the HRP-Ni-Al LDHNS film had a uniform, porous morphology. UV-vis spectroscopy indicated that the intercalated HRP retained its native structure after incorporation in the Ni-Al LDHNS film. The immobilized HRP in Ni-Al LDHNS on the surface of a glassy carbon electrode (GCE) exhibited good direct electrochemical and electrocatalytic responses to the reduction of hydrogen peroxide (H(2)O(2)) and trichloroacetic acid (TCA). The resulting H(2)O(2) biosensor showed a wide linear range from 6.00x10(-7)M to 1.92x10(-4)M, low detection limit (4.00x10(-7)M) and good stability. The results show that Ni-Al LDHNS provide a novel and efficient platform for the immobilization of enzymes and realizing direct electrochemistry and that the materials have potential applications in the fabrication of third-generation biosensors.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号