Crystallographic structure of metal-free concanavalin A at 2.5 Å resolution

The three-dimensional structure of demetallized concanavalin A has been determined at 2.5 Å resolution and refined to a crystallographic R-factor of 18%. The lectin activity of concanavalin A requires the binding of both a transition metal ion, generally Mn²⁺, and a Ca²⁺ ion in two neighboring sites in close proximity to the carbohydrate binding site. Large structural differences between the native and the metal-free lectin are observed in the metal-binding region and consequently for the residues involved in the specific binding of saccharides. The demetallization invokes a series of conformational changes in the protein backbone, apparently initiated mainly by the loss of the calcium ion. Most of the Mn²⁺ ligands retain their position, but the Ca²⁺ binding site is destroyed. The Ala207-Asp208 peptide bond, in the β-strand neighboring the metal-binding sites, undergoes a cis to trans isomerization. The cis conformation for this bond is a highly conserved feature among the leguminous lectins and is critically maintained by the Ca²⁺ ion in metal-bound concanavalin A. A further and major change adjacent to the isomerized bond is an expansion of the loop containing the monosaccharide ligand residues Leu99 and Tyr100. The dispersion of the ligand residues for the monosaccharide binding site (Asn14, Agr228, Asp208, Leu99, and Tyr100) in metalfree concanavalin A abolishes the lectin's ability to bind saccharides. Since the quaternary structure of legume lectins is essential to their biological role, the tetramer formation was analyzed. In the crystal (pH 5), the metal-free concanavalin A dimers associate into a tetramer that is similar to the native one, but with a drastically reduced number of inter-dimer interactions. This explains the tetramer dissociation into dimers below pH values of 6.5. © 1995 Wiley-Liss, Inc.     

Refined structure of human carbonic anhydrase II at 2.0 Å resolution

The structure of human erythrocytic carbonic anhydrase II has been refined by constrained and restrained structure–factor least-squares refinement at 2.0 Å resolution. The conventional crystallographic R value is 17.3%. Of 167 solvent molecules associated with the protein, four are buried and stabilize secondary structure elements. The zinc ion is ligated to three histidyl residues and one water molecule in a nearly tetrahedral geometry. In addition to the zinc-bound water, seven more water molecules are identified in the active site. Assuming that Glu-106 is deprotonated at pH 8.5, some of the hydrogen bond donor–acceptor relations in the active site can be assigned and are described here in detail. The Oγ1 atom of Thr-199 donates its proton to the Oε1 atom of Glu-106 and can function as a hydrogen bond acceptor only in additional hydrogen bonds.     

Structure of trichosanthin at 1.88 Å resolution

Trichosanthin (TCS) is one of the single chain ribosome-inactivating proteins (RIPs). The crystals of the orthorhombic form of trichosanthin have been obtained from a citrate buffer (pH 5.4) with KC1 as the precipitant. The crystal belongs to the space group P2₁2₁2₁ with a = 38.31, b = 76.22, c = 79.21 Å. The structure was solved by molecular replacement method and refined using the programs XPLOR and PROLSQ to an R-factor of 0.191 for the reflections within the 6–1.88 Å resolution range. The bond length and bond angle in the protein molecule have root-mean-square deviations from ideal value of 0.013 Å and 3.3°, respectively. The refined model includes 247 residues and 197 water molecules. The TCS molecule consists of two structural domains. The large domain contains six α-helices, a six stranded sheet, and an antiparallel β-sheet. The small domain has a largest α-helix, which shows a distinct bend. The possible active site of the molecule located on the cleft between two domains was proposed. In the active site Arg-163 and Glu-160, Glu-189 and Arg-122 form two ion pairs, Glu-189 and Gln-156 are hydrogen bonded to each other. Three water molecules are bonded to the residues in the active site region. The structures of TCS molecule and ricin A-chain (RTA) superimpose quite well, showing that the structures of the two protein molecules are homologous. Comparison of the structures of the TCS molecule in this orthorhombic crystal with that in the monoclinic crystal indicates that there are no essential differences of the structures between the two protein crystals. © 1994 Wiley-Liss, Inc.     

Crystal structure of TGF-β2 refined at 1.8 Å resolution

The crystal structure of TGF-β2 has been refined using data collected with synchrotron radiation (CHESS) to 1.8 Å resolution with a residual R (= ∑ | |F_o| ? |F_c| | /∑ |F_o|) factor of 17.3%. The model consists of 890 protein atoms from all 112 residues and 59 water molecules. The monomer of TGF-β2 assumes a rather extended conformation and lacks a well-defined hydrophobic core. Surface accessibility calculations show only 44% of the nonpolar surface is buried in the monomer. In contrast, 55.8% of the nonpolar surface area is buried when the two monomers from a dimer, a typical value for globular proteins. This includes a 1300 Ų buried interface area that is largely hydrophobic. Sequence comparisons using a profile derived from the refined TGF-β2 structure suggest that the cluster of four disulfides (three intramonomeric disulfide bonds 15–78, 44–109, 48–111 forming a disulfide knot, and one intermonomeric disulfide 77–77) together with the extended β strand region constitutes the conserved structural motif for the TGF-β superfamily. This structural motif, without the 77–77 disulfide bond, defines also the common fold for a general family of growth factors, including the nerve growth factor and platelet-derived growth factor families. The fold is conserved only at the monomer level, while the active forms are dimers, suggesting that dimerization plays an important role in regulating the binding of these cytokines to their receptors and in modulating the biological responses. © 1993 Wiley-Liss, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

Crystallographic refinement and structure of DNase I at 2 A resolution

The structure of bovine pancreatic deoxyribonuclease I (DNase I) has been refined at 2 A resolution using the restrained parameter, reciprocal least-squares procedure of Hendrickson and Konnert. The conventional R-factor for 16,104 reflections with I greater than or equal to 3 sigma (I) from 6.0 to 2.0 A resolution is 0.157. Bond lengths and angles of the refined structure are close to ideal values with root-mean-square (r.m.s.) deviations of 0.023 A and 1.4 degrees, respectively. The r.m.s. deviation of short non-bonded contacts from the sum of van der Waals' radii is 0.18 A. The orientation of side-chains shows a clear trimodal distribution of chi 1-angles at -60 degrees, 180 degrees, 60 degrees (in the order of preference) corresponding to staggered conformations. The chemically determined sequence was corrected at four positions, the major correction being an insertion of the tripeptide Ile-Val-Arg between Arg27 and Arg28. Extended hydrophobic regions in between, and on either side of, the two central six-stranded beta-pleated sheets are mainly responsible for the low average isotropic temperature factor of 11.9 A2 for the 2033 protein atoms. Besides the flexible loop region between Gly97 and Gly102 (Glu99 and Ser100 are disordered) and the carbohydrate side-chain, which both extend into a large solvent channel, only the exposed loop Arg70 to Lys74 shows elevated thermal mobility. The longest of the eight helices in DNase I, together representing 26% of the structure, has a 22 degree kink and consists of two alpha-helical segments (residues 136 to 144 and 145 to 155) separated by a 3(10)-helical turn. DNase I fragments 1 to 120 and 121 to 257 can be superimposed by an approximate 2-fold axis (r.m.s. deviation 1.49 A for 61 equivalent C alpha positions), suggesting that the enzyme might be the result of gene duplication. The two Ca2+ bound to DNase I under crystallization conditions are important for its structural integrity by stabilizing the surface loop Asp198 to Thr204 and limiting the region of high thermal mobility in the flexible loop to residues Gly97 to Gly102. The N-linked carbohydrate side-chain attached to Asn18 is of the high-mannose type with a branching point at the mannose residue in position 3.(ABSTRACT TRUNCATED AT 400 WORDS)     

High-resolution structures of retinol-binding protein in complex with retinol: pH-induced protein structural changes in the crystal state

The targeted delivery of non-polar ligands by binding proteins to membranes or membrane receptors involves the release of these ligands on or near the plasma membrane of target cells. Because these hydrophobic ligands are often bound inside a deep cavity of binding proteins, as shown previously for plasma retinol-binding protein (RBP), their release from these proteins might require the destabilization of the protein structure by partially denaturing conditions, such as those possibly present near plasma membranes. RBP is a plasma transport protein which delivers specifically retinol from its store sites to target cells. Here, we report the high-resolution (1.1-1.4A) crystal structures of bovine holo-RBP at five different pH values, ranging from 9 to 2. While unraveling details of the native protein structure and of the interactions with retinol at nearly atomic resolution at neutral pH, this study provides evidence for definite pH-induced modifications of several structural features of RBP. The structure most representative of the changes that holo-RBP undergoes at different pH values is that of its flexible state at pH 2. At this pH, most significant are the alteration of the arrangement of salt bridges and of the network of water molecules/H-bonds that participates in the retinol-RBP interaction, an appreciable increase of the volume of the beta-barrel cavity, a considerably higher degree of mobility of the RBP-bound ligand and of several protein regions and the disorder of a large number of solvent molecules that are ordered at neutral pH. These changes are likely to be accompanied by a modification of the pattern of charge distribution on the protein surface. All these changes, which reveal a substantially lowered conformational stability of RBP, presumably occur at the initial stages of the acidic denaturation of RBP and are possibly associated with a facilitated release of the retinol molecule from its carrier protein.     

Crystallographic structure refinement of Chromatium high potential iron protein at two Angstroms resolution.

The structure of Chromatium high potential iron protein (HiPIP) has been refined by semiautomatic Fo-Fc (observed minus calculated structure amplitude Fourier methods to a convential R index, R=sum of the absolute value of Fo-Fc divided by the sum of Fo, of 24.7% for a model in which bond distances and angles are constrained to standard values. Bond length and angle constraints were applied only intermittenly during the computations. At a late stage of the refinement, atomic parameters for only the Fe4S4 cluster plus the 4 associated cystein S-gamma atoms were adjusted by least squares methods and kept fixed during the rest of the refinement. The refined model consists of 625 of the 632 nonhydrogen atoms in the protein plus 75 water molecules. Seven side chain atoms could not be located in the final electron density map. A computer program rather than visual inspection was used wherever possible in the refinement: for locating water molecules, for removing water molecules that too closely approach other atoms, for deleting atoms that lay in regions of low electron density, and for evaluating the progress of refinement. Fo-Fc Fourier refinement is sufficiently economical to be applied routinely in protein crystal structure determinations. The complete HiPIP refinement required approximately 12 hours of CDC 3600 computer time and cost less than $3000 starting from a "trial structure," based upon multipe isomorphoous replacement phases, which gave an R of 43%...     

Refined structure of bovine carbonic anhydrase III at 2.0 Å resolution

The three-dimensional structure of bovine carbonic anhydrase III (BCA III) from red skeletal muscle cells has been determined by molecular replacement methods. The structure has been refined at 2.0 Å resolution by both constrained and restrained structure-factor least squares refinement. The current crystallographic R-value is 19.2% and 121 solvent molecules have so far been found associated with the protein. The structure is highly similar to the refined structure of human carbonic anhydrase II. Some differences in amino acid sequence and structure between the two isoenzymes are discussed. In BCA III, Lys 64 and Arg 91 (His 64 and Ile 91 in HCA II) are both pointing out from the active site cavity forming salt bridges with Glu 4 and Asp 72 (His 4 and Asp 72 in HCA II), respectively. However, Arg 67 and Phe 198 (Asn 67 and Leu 198 in HCA II) are oriented towards the zinc ion and significantly reduce the volume of the active site cavity. Phe 198 particularly reduces the size of the substrate binding region at the “deep water” position at the bottom of the cavity and we sugest that this is one of the major reasons for the differences in catalytic properties of isoenzyme III as compared to isozyme II. © 1993 Wiley-Liss, Inc.     

Open and shut: Crystal structures of the dodecylmaltoside solubilized mechanosensitive channel of small conductance from Escherichia coli and Helicobacter pylori at 4.4 Å and 4.1 Å resolutions

The mechanosensitive channel of small conductance (MscS) contributes to the survival of bacteria during osmotic downshock by transiently opening large diameter pores for the efflux of cellular contents before the membrane ruptures. Two crystal structures of the Escherichia coli MscS are currently available, the wild type protein in a nonconducting state at 3.7 Å resolution (Bass et al., Science 2002; 298:1582–1587) and the Ala106Val variant in an open state at 3.45 Å resolution (Wang et al., Science 2008; 321:1179–1183). Both structures used protein solubilized in the detergent fos‐choline‐14. We report here crystal structures of MscS from E. coli and Helicobacter pylori solubilized in the detergent β‐dodecylmaltoside at resolutions of 4.4 and 4.2 Å, respectively. While the cytoplasmic domains are unchanged in these structures, distinct conformations of the transmembrane domains are observed. Intriguingly, β‐dodecylmaltoside solubilized wild type E. coli MscS adopts the open state structure of A106V E. coli MscS, while H. pylori MscS resembles the nonconducting state structure observed for fos‐choline‐14 solubilized E. coli MscS. These results highlight the sensitivity of membrane protein conformational equilibria to variations in detergent, crystallization conditions, and protein sequence.     

Crystal structure of human coactosin-like protein at 1.9 A resolution

Human coactosin-like protein (CLP) shares high homology with coactosin, a filamentous (F)-actin binding protein, and interacts with 5LO and F-actin. As a tumor antigen, CLP is overexpressed in tumor tissue cells or cell lines, and the encoded epitopes can be recognized by cellular and humoral immune systems. To gain a better understanding of its various functions and interactions with related proteins, the crystal structure of CLP expressed in Escherichia coli has been determined to 1.9 A resolution. The structure features a central beta-sheet surrounded by helices, with two very tight hydrophobic cores on each side of the sheet. CLP belongs to the actin depolymerizing protein superfamily, and is similar to yeast cofilin and actophilin. Based on our structural analysis, we observed that CLP forms a polymer along the crystallographic b axis with the exact same repeat distance as F-actin. A model for the CLP polymer and F-actin binding has therefore been proposed.     

The structure of porin from Rhodobacter capsulatus at 1.8 Å resolution

The structure of the porin from Rhodobacter capsulanus was determined at a resolution of 1.8 Å. The analysis started from a closely related crystal structure that had been solved at a medium resolution of 3 Å using multiple isomorphous replacement and solvent flattening. The new structure contains the complete sequence of 301 amino acid residues. Refinement of the model is under way: the present R-factor is 22% with good geometry. Except for the lengths of several loops, the resulting chain fold corresponds to the medium resolution model. The membrane channel is lined by a large number of ionogenic side chains with characteristic segregation of differently charged groups.     

The crystal structure at 2A resolution of the Ca2+ -binding protein S100P

S100P is a small calcium-binding protein of the S100 EF-hand-containing family of proteins. Elevated levels of its mRNA are reported to be associated with the progression to hormone independence and metastasis of prostate cancer and to be associated with loss of senescence in human breast epithelial cells in vitro. The first structure of human recombinant S100P in calcium-bound form is now reported at 2.0A resolution by X-ray diffraction. A flexible linker connects the two EF-hand motifs. The protein exists as a homodimer formed by non-covalent interactions between large hydrophobic areas on monomeric S100P. Experiments with an optical biosensor to study binding parameters of the S100P monomer interaction showed that the association rate constant was faster in the presence of calcium than in their absence, whereas the dissociation rate constant was independent of calcium. The K(d) values were 64(+/-24)nM and 2.5(+/-0.8) microM in the presence and in the absence of calcium ions, respectively. Dimerization of S100P is demonstrated in vivo using the yeast two-hybrid system. The effect of mutation of specific amino acids suggests that dimerization in vivo can be affected by amino acids on the dimer interface and in the hydrophobic core.     

Crystal structure of Escherichia coli TEM1 β-lactamase at 1.8 Å resolution

The X-ray structure of Escherichia coli TEM1β-lactamase has been refined to a crystallorgphic R-factor of 16.4% for 22,510 reflections between 5.0 and 1.8 Å resolution; 199 water molecules and 1 sulphate ion were included in refinement. Except for the tips of a few solvent-exposed side chains, all protein atoms have clear electron density and refined to an average atomic temperature factor of 11 Ų. The estimated coordinates error is 0.17 Å. The substrate binding site is located at the interface of the two domains of the protein and contains 4 water molecules and the sulphate anion. One of these solvent molecules is found at hydrogen bond distance from S70 and E166. S70 and S130 are hydrogen bonded to K73 and K234, respectively. It was found that the E. coli TEM1 and Staphylococcus aureus PC1 β-lactamases crystal structures differ in the relative orientations of the two domains composing the enzymes, which result in a narrowed substrate binding cavity in the TEM1 enzyme. Local but significant differences in the vicinity of this site may explain the occurrence of TEM1 natural mutants with extended substrate specificities. © 1993 Wiley-Liss, Inc.     

Mouse retinol binding protein gene: Cloning,expression and regulation by retinoic acid

A full-length cDNA clone encoding the retinol binding protein (RBP) was isolated from a mouse liver cDNA library by hybridization screening. The nucleotide sequence of murine RBP is 85 and 95% homologous to that of human and rat RBP, respectively, with a deduced amino acid sequence 83% homologous to both species. Analysis of the tissue expression pattern of RBP mRNA in the female mouse indicated relatively abundant expression in the liver, with lesser amounts in extrahepatic tissues including adipose, kidney, spleen and uterus, suggesting that these tissues may have a significant role in retinol homeostasis. Mouse liver cell RBP regulation by retinoids was also investigated. Both all-trans retinoic acid (AT-RA) and 9-cis retinoic acid (9c-RA) induced RBP mRNA expression in a dose- and time-dependent manner. Maximal levels (up to 4-fold above controls) were observed at 48h following treatment of both mouse hepatoma cells in vitro and in vivo in mice receiving a single, oral dose of either retinoid. Interestingly, 9c-RA was more potent at RBP induction in both in vivo and in vitro systems. Given the extent and temporal pattern of RBP induction, we suggest that the RA-mediated increase in liver RBP is part of a cellular protection mechanism. Increased levels of RBP would facilitate sequestration and possibly cellular export of RA in cells receiving prolonged exposure to high levels of RA, thus minimizing toxicity.     

干扰视黄醇结合蛋白4对猪脂肪细胞PI3K/Akt信号通路的影响

视黄醇结合蛋白4(Retinol binding protein 4,RBP4)是一种脂肪细胞分泌因子,其表达水平的升高与胰岛素抵抗及Ⅱ型糖尿病等疾病密切相关,但具体作用机制尚不清楚。为明确此机制,通过包装RBP4干扰慢病毒并侵染猪前体脂肪细胞。运用胰岛素激活及诱导胰岛素抵抗模型,利用QRT-PCR及Western blotting方法检测RBP4的干扰效率及处理组PI3K/Akt信号通路相关基因的表达。结果显示RBP4的基因及蛋白的干扰效率达到60%(P<0.01)以上。进一步研究发现在胰岛素诱导及胰岛素抵抗的情况下,LH1-shRBP4干扰后可显著提高胰岛素信号通路AKT2、PI3K、GLUT4和IRS1基因mRNA的表达;明显促进AKT2、PI3K和IRS1蛋白的磷酸化;提高AKT2、PI3K和GLUT4基因的总蛋白水平。总之,RBP4干扰通过上调PI3K/Akt胰岛素信号通路相关因子的表达及其磷酸化水平,提高了胰岛素敏感性。此研究将为胰岛素抵抗相关疾病的治疗提供新思路。     

Effects of retinol binding protein-4 on vascular endothelial cells

The study was designed to investigate the effect of retinol binding protein (RBP)-4 on the phosphatidylinositol 3-kinase (PI3K) and mitogen-activated protein kinase (MAPK) pathways, which mediate the effects of insulin in vascular endothelial cells. The effects of RBP4 on nitric oxide (NO) and insulin-stimulated endothelin-1 (ET-1) secretion and on phosphorylation (p) of Akt, endothelial NO synthetase (eNOS), and extracellular signal-regulated kinase (ERK)1/2 were investigated in bovine vascular aortic endothelial cells (BAECs). RBP4 showed an acute vasodilatatory effect on aortic rings of rats within a few minutes. In BAECs, RBP4-treatment for 5 min significantly increased NO production, but inhibited insulin-stimulated ET-1 secretion. RBP4-induced NO production was not inhibited by tetraacetoxymethylester (BAPTA-AM), an intracellular calcium chelator, but was completely abolished by wortmannin, a PI3K inhibitor. RBP4 significantly increased p-Akt and p-eNOS production, and significantly inhibited p-ERK1/2 production. Triciribine, an Akt inhibitor, and wortmannin significantly inhibited RBP4-induced p-Akt and p-eNOS production. Inhibition of Akt1 by small interfering RNA decreased p-eNOS production enhanced by RBP4 in human umbilical vein endothelial cells. In conclusion, RBP4 has a robust acute effect of enhancement of NO production via stimulation of part of the PI3K/Akt/eNOS pathway and inhibition of ERK1/2 phosphorylation and insulin-induced ET-1 secretion, probably in the MAPK pathway, which results in vasodilatation.