Protease-deficient DegP suppresses lethal effects of a mutant OmpC protein by its capture

The expression of assembly-defective outer membrane proteins can confer lethality if they are not degraded by envelope proteases. We report here that the expression of a mutant OmpC protein, OmpC(2Cys), which forms disulfide bonds in the periplasm due to the presence of two non-native cysteine residues, is lethal in cells lacking the major periplasmic protease, DegP. This lethality is not observed in dsbA strains that have diminished ability to form periplasmic disulfide bonds. Our data show that this OmpC(2Cys)-mediated lethality in a degP::Km(r) dsbA(+) background can be reversed by a DegP variant, DegP(S210A), that is devoid of its proteolytic activity but retains its reported chaperone activity. However, DegP(S210A) does not reverse the lethal effect of OmpC(2Cys) by correcting its assembly but rather by capturing misfolded mutant OmpC polypeptides and thus removing them from the assembly pathway. Displacement of OmpC(2Cys) by DegP(S210A) also alleviates the negative effect that the mutant OmpC protein has on wild-type OmpF.     

Differential effects of yfgL mutation on Escherichia coli outer membrane proteins and lipopolysaccharide

YfgL together with NlpB, YfiO, and YaeT form a protein complex to facilitate the insertion of proteins into the outer membrane of Escherichia coli. Without YfgL, the levels of OmpA, OmpF, and LamB are significantly reduced, while OmpC levels are slightly reduced. In contrast, the level of TolC significantly increases in a yfgL mutant. When cells are depleted of YaeT or YfiO, levels of all outer membrane proteins examined, including OmpC and TolC, are severely reduced. Thus, while the assembly pathways of various nonlipoprotein outer membrane proteins may vary through the step involving YfgL, all assembly pathways in Escherichia coli converge at the step involving the YaeT/YfiO complex. The negative effect of yfgL mutation on outer membrane proteins may in part be due to elevated sigma E activity, which has been shown to downregulate the synthesis of various outer membrane proteins while upregulating the synthesis of periplasmic chaperones, foldases, and lipopolysaccharide. The data presented here suggest that the yfgL effect on outer membrane proteins also stems from a defective assembly apparatus, leading to aberrant outer membrane protein assembly, except for TolC, which assembles independent of YfgL. Consistent with this view, the simultaneous absence of YfgL and the major periplasmic protease DegP confers a synthetic lethal phenotype, presumably due to the toxic accumulation of unfolded outer membrane proteins. The results support the hypothesis that TolC and major outer membrane proteins compete for the YaeT/YfiO complex, since mutations that adversely affect synthesis or assembly of major outer membrane proteins lead to elevated TolC levels.     

Examination of AsmA and its effect on the assembly of Escherichia coli outer membrane proteins

asmA mutations were isolated as extragenic suppressors of an OmpF assembly mutant, OmpF315. This suppressor locus produced a protein that was present in extremely low levels and could only be visualized by Western blotting in cells where AsmA expression was induced from a plasmid. Detailed fractionation analyses showed that AsmA localized with the inner membrane. Curiously, however, the mutant OmpF assembly step influenced by AsmA occurred in the outer membrane, perhaps indicating an indirect involvement of AsmA in the assembly of outer membrane proteins. Biochemical examination of the outer membrane showed that asmA null mutations reduce lipo-polysaccharide (LPS) levels, thereby lowering the ratios of glycerolphospholipids to LPS and envelope proteins to LPS in the outer membrane. Despite these quantitative alterations, no apparent structural changes in LPS or major phospholipids were noted. Reduced LPS levels in asmA mutants indicate a possible role of AsmA in LPS biogenesis. Data presented in this study suggest that asmA-mediated OmpF assembly suppression may have been achieved by altering the outer membrane fluidity, thus making it more amenable for the assembly of mutant proteins.     

asmB, a suppressor locus for assembly-defective OmpF mutants of Escherichia coli, is allelic to envA (lpxC).

A novel genetic scheme allowed us to isolate extragenic suppressor mutations that restored mutant OmpF assembly. One group of these mutations, termed asmB for assembly suppressor mutation B, permitted mutant OmpF assembly in a non-allele-specific manner. Genetic mapping analyses placed the asmB mutations at the 2-min region of the Escherichia coli K-12 chromosome. Further analyses revealed that the asmB mutations map within the envA (lpxC) gene, which encodes an enzyme needed for the synthesis of the lipid A moiety of lipopolysaccharide (LPS). Nucleotide sequence analysis showed that the asmB mutations caused a change from F-50 to S (F50S substitution) (asmB2 and asmB3) or a G210S substitution (asmB1) in EnvA. Cells bearing the asmB alleles displayed increased sensitivity to various hydrophobic compounds and detergents, suggesting an alteration within the outer membrane. Direct examination (of the LPS showed that its amounts were reduced by the asmB mutations, with asmB1 exerting a greater effect than asmB2 or asmB3. Thus, it appears that the asmB mutations achieve mutant OmpF assembly suppression by reducing LPS levels, which in turn may alter membrane fluidity.     

Molecular analysis of asmA, a locus identified as the suppressor of OmpF assembly mutants of Escherichia coli K-12

We present the molecular characterization of the asmA gene, whose product is involved in the assembly of outer membrane proteins in Escherichia coli K-12. The asmA locus was initially identified as a site for suppressor mutations of an assembly defective OmpF315. Our data suggest that these suppressor mutations either completely abolish or reduce asmA expression and can be complemented in trans by piasmid clones carrying asmA sequences. The recessive nature of asmA suppressor mutations suggests that the functional AsmA protein participates in Inhibiting the assembly of OmpF315 and other mutant OmpFs. As the assembly of wild-type and parental OmpF proteins was not affected by asmA mutations, AsmA must provide an environment refractory only to the assembly of mutant OmpF proteins. However, we cannot completely rule out the possibility that AsmA plays a minor role in the assembly of wild-type and parental OmpF in wild-type cells. The presence of a putative signal sequence within the amino-terminal sequence of AsmA suggests that it is either a periplasmic or an outer membrane protein. This predicted location of AsmA is compatible with its role in the assembly of outer membrane proteins.     

Modulations in lipid A and phospholipid biosynthesis pathways influence outer membrane protein assembly in Escherichia coli K-12

The assembly defect of a mutant outer membrane protein, OmpF315, can be corrected by suppressor mutations that lower lipopolysaccharide (LPS) levels and indirectly elevate phospholipid levels. One such assembly suppressor mutation, asmB1 , is an allele of lpxC ( envA ) whose product catalyses the first rate-limiting step in the lipid A (LPS) biosynthesis pathway. Besides reducing LPS levels, asmB1 confers sensitivity to MacConkey medium. A mutation, sabA1 , that reverses the MacConkey sensitivity phenotype of asmB1 maps within fabZ (whose product is needed for phospholipid synthesis from a precursor) is also required for lipid A synthesis. In addition to reversing MacConkey sensitivity, the sabA1 mutation reverses the OmpF315 assembly suppression phenotype of asmB1 . These results show that OmpF315 assembly suppression by asmB1 , which is achieved by lowering LPS levels, can be averted by a subsequent aberration in phospholipid synthesis at a point where the biosynthetic pathways for these two lipid molecules split. OmpF315 assembly suppression can also be achieved in an asmB ⁺ background where FabZ expression is increased. The data obtained in this study provide genetic evidence that elevated phospholipid levels and/or phospholipid to LPS ratios are necessary for assembly suppression.     

OmpF assembly mutants of Escherichia coli K-12: isolation, characterization, and suppressor analysis.

This paper describes a novel genetic method used to isolate mutations that alter proper assembly of OmpF in the outer membrane. The thermolabile nature of assembly intermediates allowed selection of temperature-sensitive mutations within the ompF gene. A variant allele of ompF (ompF-Dex) was used because it provided a convenient selectable phenotype (Dex+). Assembly mutants were isolated in two steps. First, amber mutations were obtained that mapped in ompF-Dex. This resulted in a Dex- phenotype. Starting with these Dex- strains, Dex+ revertants were isolated. Mutants that displayed a temperature-sensitive Dex+ phenotype were further characterized. Three such mutants possessed a single substitution within ompF that reverted the nonsense codon to a sense codon which replaced W214 with either an E or Q and Y231 with a Q residue in the mature OmpF protein. All three mutant OmpF proteins showed an assembly defect. This defect led to a substantial reduction in the amount of stable OmpF trimers with the concomitant increase of a high-molecular-weight form of OmpF which migrated at the top of the gel. Suppressor mutations were sought that corrected the assembly defect of OmpF. These extragenic suppressor mutations were mapped at 45 min on the Escherichia coli chromosome. The suppressor mutations displayed no allele specificity and were recessive to the wild-type allele. In the presence of a suppressor, mutant stable trimers appeared in an almost normal manner. The appearance of stable trimers concurred with a substantial loss of the high-molecular-weight OmpF species. At this stage, it is not clear whether the high-molecular-weight species of OmpF is a normal assembly intermediate or a dead-end assembly product. The results presented in this study raise the intriguing possibility of a chaperone-like activity for the wild-type suppressor gene product.     

Acquisition of Escherichia coli outer membrane proteins by Bdellovibrio sp. strain 109D

The ability of Bdellovibrio sp. to acquire the OmpF major outer membrane protein from its Escherichia coli prey was examined to determine if there were other outer membrane proteins which could or could not be acquired. Growth of bdellovibrios on mutant prey which were defective in the expression of outer membrane proteins revealed that Bdellovibrio sp. could acquire the OmpC protein in the absence of the OmpF protein. However, the OmpA, LamB, and protein 2 proteins could not be found in the Bdellovibrio Triton-insoluble outer membrane. The disappearance of the OmpF and OmpC proteins from the bdelloplast surface was measured, and it was determined that Bdellovibrio sp. exhibited a kinetic and temporal preference for the OmpF protein. Bdellovibrios could be grown on porin-deficient prey, and the progeny bdellovibrios possessed outer membranes with a protein mass deficiency.     

Engineered oligomerization state of OmpF protein through computational design decouples oligomer dissociation from unfolding

Biogenesis of β-barrel membrane proteins is a complex, multistep, and as yet incompletely characterized process. The bacterial porin family is perhaps the best-studied protein family among β-barrel membrane proteins that allows diffusion of small solutes across the bacterial outer membrane. In this study, we have identified residues that contribute significantly to the protein-protein interaction (PPI) interface between the chains of outer membrane protein F (OmpF), a trimeric porin, using an empirical energy function in conjunction with an evolutionary analysis. By replacing these residues through site-directed mutagenesis either with energetically favorable residues or substitutions that do not occur in natural bacterial outer membrane proteins, we succeeded in engineering OmpF mutants with dimeric and monomeric oligomerization states instead of a trimeric oligomerization state. Moreover, our results suggest that the oligomerization of OmpF proceeds through a series of interactions involving two distinct regions of the extensive PPI interface: two monomers interact to form a dimer through the PPI interface near G19. This dimer then interacts with another monomer through the PPI interface near G135 to form a trimer. We have found that perturbing the PPI interface near G19 results in the formation of the monomeric OmpF only. Thermal denaturation of the designed dimeric OmpF mutant suggests that oligomer dissociation can be separated from the process of protein unfolding. Furthermore, the conserved site near G57 and G59 is important for the PPI interface and might provide the essential scaffold for PPIs.     

An inner membrane protein N-terminal signal sequence is able to promote efficient localisation of an outer membrane protein in Escherichia coli

To test the importance of N-terminal pre-sequences in translocation of different classes of membrane proteins, we exchanged the normal signal sequence of an Escherichia coli outer membrane protein, OmpF, for the pre-sequence of the inner membrane protein, DacA. The DacA-OmpF hybrid was efficiently assembled into the outer membrane in a functionally active form. Thus the pre-sequence of DacA, despite its relatively low hydrophobicity compared with that of OmpF, contains all the essential information necessary to initiate the translocation of OmpF to the outer membrane. Since processing of DacA was also shown to be dependent upon SecA we conclude that the initiation of translocation of this inner membrane polypeptide across the envelope occurs by the same mechanism as outer membrane and periplasmic proteins. The N-terminal 11 amino acids of mature OmpF, which in the hybrid are replaced by the N-terminal nine amino acids of DacA, carry no essential assembly signals since the hybrid protein is apparently assembled with equal efficiency to OmpF.     

Skp, a molecular chaperone of gram-negative bacteria, is required for the formation of soluble periplasmic intermediates of outer membrane proteins.

Using a cross-linking approach, we have analyzed the function of Skp, a presumed molecular chaperone of the periplasmic space of Escherichia coli, during the biogenesis of an outer membrane protein (OmpA). Following its transmembrane translocation, OmpA interacts with Skp in close vicinity to the plasma membrane. In vitro, Skp was also found to bind strongly and specifically to pOmpA nascent chains after their release from the ribosome suggesting the ability of Skp to recognize early folding intermediates of outer membrane proteins. Pulse labeling of OmpA in spheroplasts prepared from an skp null mutant revealed a specific requirement of Skp for the release of newly translocated outer membrane proteins from the plasma membrane. Deltaskp mutant cells are viable and show only slight changes in the physiology of their outer membranes. In contrast, double mutants deficient both in Skp and the periplasmic protease DegP (HtrA) do not grow at 37 degrees C in rich medium. We show that in the absence of an active DegP, a lack of Skp leads to the accumulation of protein aggregates in the periplasm. Collectively, our data demonstrate that Skp is a molecular chaperone involved in generating and maintaining the solubility of early folding intermediates of outer membrane proteins in the periplasmic space of Gram-negative bacteria.     

Export of altered forms of an Escherichia coli K-12 outer membrane protein (OmpA) can inhibit synthesis of unrelated outer membrane proteins

Expression of mutant ompA genes, encoding the 325 residue Escherichia coli outer membrane protein OmpA, caused an inhibition of synthesis of the structurally unrelated outer membrane porins OmpC and OmpF and of wild-type OmpA, but not of the periplasmic beta-lactamase. There was no accumulation of precursors of the target proteins and the inhibitory mechanism operated at the level of translation. So far only alterations around residue 45 of OmpA have been found to affect this phenomenon. Linkers were inserted between the codons for residues 45 and 46. A correlation between size and sequence of the resulting proteins and presence or absence of the inhibitory effect was not found, indicating that the added residues acted indirectly by altering the conformation of other parts of the mutant OmpA. To be effective, the altered polypeptides had to be channelled into the export pathway. Internal deletions in effector proteins, preventing incorporation into the membrane, abolished effector activity. The results suggest the existence of a periplasmic component that binds to OmpA prior to membrane assembly; impaired release of this factor from mutant OmpA proteins may trigger inhibition of translation. The factor could be a See B-type protein, keeping outer membrane proteins in a form compatible with membrane assembly.     

革兰氏阴性菌膜间质蛋白酶DegP研究进展

膜间质蛋白酶(DegP),是一种广泛存在于真核生物和原核生物细胞中的蛋白。DegP同时具有酶活性和分子伴侣活性,并通过多聚体构成胶囊状结构执行其分子伴侣功能。DegP的酶活性依赖酶切位点与PDZ1结构域双重识别方式识别底物,这种识别模式被称为"分子量尺"。在革兰氏阴性菌中,DegP主要位于膜间质,通过分子伴侣活性与酶活性帮助保护错误折叠蛋白或降解变性蛋白。DegP也参与外膜蛋白的转运,是DegP胞内活性的研究重点。DegP也可以被分泌到胞外,帮助宿主对抗恶劣环境,并参与调节生物被膜的形成。本文将从DegP的结构与活性、胞内功能与胞外功能三大方面对DegP的研究进展进行总结,为革兰氏阴性菌周质中蛋白质质量控制与DegP体外功能的进一步研究提供参考。     

The assembly of the major outer membrane protein OmpF of Escherichia coli depends on lipid synthesis.

Cerulenin, a drug which specifically blocks lipid synthesis, prevented both the trimerization of OmpF monomers and their assembly into the outer membrane of Escherichia coli B cells. A monoclonal antibody directed against a surface-exposed epitope of the trimer was used to probe the assembly of OmpF in the presence or absence of the drug. An inhibition level of 80% was reached 16 min after the addition of cerulenin. The accumulated monomeric form could not be assembled even after lipid synthesis was restored. Instead, it was slowly degraded. It was further shown that the inhibition of assembly resulted in a rapid inhibition of OmpF synthesis. These data demonstrate that there is a direct relationship between the synthesis of lipid (most likely lipopolysaccharide) and the correct export of OmpF. This coupling is required to promote the trimerization of the porin monomer and its assembly into the outer membrane.     

Complementation analysis of the wild-type and mutant ompR genes exhibiting different phenotypes of osmoregulation of the ompF and ompC genes of Escherichia coli

Expression of the ompF and ompC genes, which encode the major outer membrane proteins, OmpF and OmpC, respectively, is affected in a reciprocal manner by the osmolarity of the growth medium. This osmoregulation is mediated by the OmpR protein, a positive regulator of both genes, which is encoded by the ompR gene. Structural and functional properties of this regulatory protein were studied through complementation analysis of the wild-type and five mutant ompR genes that exhibited differences in osmoregulation of the expression of the OmpF and OmpC proteins. Complementation was carried out with combinations of a host strain and a plasmid, each of which carried either the wild-type or a mutant ompR gene. In some combinations, negative complementation was observed. For example, ompR1, a deletion mutation with an OmpF- OmpC- phenotype, was dominant to OmpF+ or OmpC+ phenotypes conferred by other ompR genes. Positive complementation of two mutant ompR genes was also observed in other combinations, when the two mutations were distantly located from each other on the OmpR protein. These results, together with other observations, support the view that the OmpR protein has a two-domain structure, each domain exhibiting a different role in the expression of the OmpF and OmpC proteins, and that this protein takes a multimeric structure as a functional unit.     

Co-ordination between membrane oriC sequestration factors and a chromosome partitioning protein, TolC (MukA)

oriC DNA in the hemimethylated (but not in the fully methylated) state reacts with an Escherichia coli K-12 outer membrane preparation. This reaction is drastically reduced when the membrane preparation of a seqA null mutant is used. An in vitro reconstitution of the activity was undertaken by adding a partially purified SeqA protein to a seqA mutant membrane without success. A possible reason for this failure might be a profound modification of the outer membrane of the seqA mutant (as revealed by the fact that membrane from the mutant sediments more slowly than that from the wild type during ultracentrifugation). There is also a reduction in the content of OmpF protein. Moreover, one of the minor outer membrane proteins involved in partitioning of newly synthesized chromosomes, the TolC (MukA) protein, was also found to be downregulated in the seqA mutant. This is also true of the hobH mutant grown in a high-osmolarity medium. Mutants of both seqA and hobH stop dividing after hyperosmotic shock, forming filaments (as observed in dam mutants).     

Assembly of colicin A in the outer membrane of producing Escherichia coli cells requires both phospholipase A and one porin,but phospholipase A is sufficient for secretion

Three oligomeric forms of colicin A with apparent molecular masses of about 95 to 98 kDa were detected on sodium dodecyl sulfate (SDS)-polyacrylamide gels loaded with unheated samples from colicin A-producing cells of Escherichia coli. These heat-labile forms, called colicins Au, were visualized both on immunoblots probed with monoclonal antibodies against colicin A and by radiolabeling. Cell fractionation studies show that these forms of colicin A were localized in the outer membrane whether or not the producing cells contained the cal gene, which encodes the colicin A lysis protein responsible for colicin A release in the medium. Pulse-chase experiments indicated that their assembly into the outer membrane, as measured by their heat modifiable migration in SDS gels, was an efficient process. Colicins Au were produced in various null mutant strains, each devoid of one major outer membrane protein, except in a mutant devoid of both OmpC and OmpF porins. In cells devoid of outer membrane phospholipase A (OMPLA), colicin A was not expressed. Colicins Au were detected on immunoblots of induced cells probed with either polyclonal antibodies to OmpF or monoclonal antibodies to OMPLA, indicating that they were associated with both OmpF and OMPLA. Similar heat-labile forms were obtained with various colicin A derivatives, demonstrating that the C-terminal domain of colicin A, but not the hydrophobic hairpin present in this domain, was involved in their formation.     

Genetic and biochemical characterization of anEscherichia coli K-12 mutant with an altered outer membrane protein

The properties of anEscherichia coli K-12 mutant are described which seemingly produces a “new” major outer membrane protein with an apparent molecular weight of 40000. This 40K protein was purified and its cyanogen bromide (CNBr) fragments were compared with those of several known major outer membrane proteins. A similarity was found between the CNBr fragments of the 40K protein and those of the OmpF protein (molecular weight 37000). In addition, the 40K protein was found to be regulated exactly like the OmpF protein, and the mutation which causes the production of the 40K protein has been localized in (or very close to) theompF gene. It is concluded that the 40K protein is a mutant form of the OmpF protein. The results provide additional evidence that theompF gene at minute 21 is the structural gene for the OmpF protein.