Crystal structure of (Gly-Pro-Hyp)(9) : implications for the collagen molecular model

Collagens have long been believed to adopt a triple‐stranded molecular structure with a 10/3 symmetry (ten triplet units in three turns) and an axial repeat of 29 Å. This belief even persisted after an alternative structure with a 7/2 symmetry (seven triplet units in two turns) with an axial repeat of 20 Å had been proposed. The uncertainty regarding the helical symmetry of collagens is attributed to inadequate X‐ray fiber diffraction data. Therefore, for better understanding of the collagen helix, single‐crystal analyses of peptides with simplified characteristic amino acid sequences and similar compositions to collagens have long been awaited. Here we report the crystal structure of (Gly‐Pro‐Hyp)₉ peptide at a resolution of 1.45 Å. The repeating unit of this peptide, Gly‐Pro‐Hyp, is the most typical sequence present in collagens, and it has been used as a basic repeating unit in fiber diffraction analyses of collagen. The (Gly‐Pro‐Hyp)₉ peptide adopts a triple‐stranded structure with an average helical symmetry close to the ideal 7/2 helical model for collagen. This observation strongly suggests that the average molecular structure of collagen is not the accepted Rich and Crick 10/3 helical model but is a 7/2 helical conformation. © 2012 Wiley Periodicals, Inc. Biopolymers 97: 607–616, 2012.     

Crystal structure of the collagen model peptide (Pro‐Pro‐Gly)4‐Hyp‐Asp‐Gly‐(Pro‐Pro‐Gly)4 at 1.0 Å resolution

The single‐crystal structure of the collagen‐like peptide (Pro‐Pro‐Gly)₄‐Hyp‐Asp‐Gly‐(Pro‐Pro‐Gly)₄, was analyzed at 1.02 Å resolution. The overall average helical twist (θ = 49.6°) suggests that this peptide adopts a 7/2 triple‐helical structure and that its conformation is very similar to that of (Gly‐Pro‐Hyp)₉, which has the typical repeating sequence in collagen. High‐resolution studies on other collagen‐like peptides have shown that imino acid‐rich sequences preferentially adopt a 7/2 triple‐helical structure (θ = 51.4°), whereas imino acid‐lean sequences adopt relaxed conformations (θ < 51.4°). The guest Gly‐Hyp‐Asp sequence in the present peptide, however, has a large helical twist (θ = 61.1°), whereas that of the host Pro‐Pro‐Gly sequence is small (θ = 46.7°), indicating that the relationship between the helical conformation and the amino acid sequence of such peptides is complex. In the present structure, a strong intermolecular hydrogen bond between two Asp residues on the A and B strands might induce the large helical twist of the guest sequence; this is compensated by a reduced helical twist in the host, so that an overall 7/2‐helical symmetry is maintained. The Asp residue in the C strand might interact electrostatically with the N‐terminus of an adjacent molecule, causing axial displacement, reminiscent of the D‐staggered structure in fibrous collagens. © 2013 Wiley Periodicals, Inc. Biopolymers 99: 436–447, 2013.     

High‐resolution structures of collagen‐like peptides [(Pro‐Pro‐Gly)4‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)4]: Implications for triple‐helix hydration and Hyp(X) puckering

Structures of (Pro‐Pro‐Gly)₄‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)₄ (ppg9‐XYG) where (Xaa, Yaa) = (Pro, Hyp), (Hyp, Pro) or (Hyp, Hyp) were analyzed at high resolution using synchrotron radiation. Molecular and crystal structures of these peptides are very similar to those of the (Pro‐Pro‐Gly)₉ peptide. The results obtained in this study, together with those obtained from related compounds, indicated the puckering propensity of the Hyp in the X position: (1) Hyp(X) residues involved in the Hyp(X):Pro(Y) stacking pairs prefer the down‐puckering conformation, as in ppg9‐OPG, and ppg9‐OOG; (2) Hyp(X) residues involved in the Hyp(X):Hyp(Y) stacking pairs prefer the up‐puckering conformation if there is no specific reason to adopt the down‐puckering conformation. Water molecules in these peptide crystals are classified into two groups, the 1st and 2nd hydration waters. Water molecules in the 1st hydration group have direct hydrogen bonds with peptide oxygen atoms, whereas those in the 2nd hydration group do not. Compared with globular proteins, the number of water molecules in the 2nd hydration shell of the ppg9‐XYG peptides is very large, likely due to the unique rod‐like molecular structure of collagen model peptides. In the collagen helix, the amino acid residues in the X and Y positions must protrude outside of the triple helix, which forces even the hydrophobic side chains, such as Pro, to be exposed to the surrounding water molecules. Therefore, most of the waters in the 2nd hydration shell are covering hydrophobic Pro side chains by forming clathrate structures. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 361–372, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Temperature-dependent higher order structures of the (Pro-Pro-Gly)₁₀-modified dendrimer

Collagen is the most abundant protein in mammals and is widely used as a biomaterial for tissue engineering and drug delivery. We previously reported that dendrimers and linear polymers, modified with collagen model peptides (Pro‐Pro‐Gly)₅, form a collagen‐like triple‐helical structure; however, its triple helicity needs improvement. In this study, a collagen‐mimic dendrimer modified with the longer collagen model peptides, (Pro‐Pro‐Gly)₁₀, was synthesized and named PPG10‐den. Circular dichroism analysis shows that the efficiency of the triple helix formation in PPG10‐den was much improved over the original. The X‐ray diffraction analysis suggests that the higher order structure was similar to the collagen triple helix. The thermal stability of the triple helix in PPG10‐den was higher than in the PPG10 peptide itself and our previous collagen‐mimic polymers using (Pro‐Pro‐Gly)₅. Interestingly, PPG10‐den also assembled at low temperatures. Self‐assembled structures with spherical and rod‐like shapes were observed by transmission electron microscopy. Furthermore, a hydrogel of PPG10‐den was successfully prepared which exhibited the sol‐gel transition around 45°C. Therefore, the collagen‐mimic dendrimer is a potential temperature‐dependent biomaterial. © 2010 Wiley Periodicals, Inc. Biopolymers 95: 270–277, 2011.     

Interruptions in the collagen repeating tripeptide pattern can promote supramolecular association

The standard collagen triple‐helix requires a perfect (Gly‐Xaa‐Yaa)_n sequence, yet all nonfibrillar collagens contain interruptions in this tripeptide repeating pattern. Defining the structural consequences of disruptions in the sequence pattern may shed light on the biological role of sequence interruptions, which have been suggested to play a role in molecular flexibility, collagen degradation, and ligand binding. Previous studies on model peptides with 1‐ and 4‐residue interruptions showed a localized perturbation within the triple‐helix, and this work is extended to introduce natural collagen interruptions up to nine residue in length within a fixed (Gly‐Pro‐Hyp)_n peptide context. All peptides in this set show decreases in triple‐helix content and stability, with greater conformational perturbations for the interruptions longer than five residue. The most stable and least perturbed structure is seen for the 5‐residue interruption peptide, whose sequence corresponds to a Gly to Ala missense mutation, such as those leading to collagen genetic diseases. The triple‐helix peptides containing 8‐ and 9‐residue interruptions exhibit a strong propensity for self‐association to fibrous structures. In addition, a small peptide modeling only the 9‐residue sequence within the interruption aggregates to form amyloid‐like fibrils with antiparallel β‐sheet structure. The 8‐ and 9‐residue interruption sequences studied here are predicted to have significant cross‐β aggregation potential, and a similar propensity is reported for ～10% of other naturally occurring interruptions. The presence of amyloidogenic sequences within or between triple‐helix domains may play a role in molecular association to normal tissue structures and could participate in observed interactions between collagen and amyloid.     

Noncollagenous region of the streptococcal collagen‐like protein is a trimerization domain that supports refolding of adjacent homologous and heterologous collagenous domains

Proper folding of the (Gly‐Xaa‐Yaa)_n sequence of animal collagens requires adjacent N‐ or C‐terminal noncollagenous trimerization domains which often contain coiled‐coil or beta sheet structure. Collagen‐like proteins have been found recently in a number of bacteria, but little is known about their folding mechanism. The Scl2 collagen‐like protein from Streptococcus pyogenes has an N‐terminal globular domain, designated V_sp, adjacent to its triple‐helix domain. The V_sp domain is required for proper refolding of the Scl2 protein in vitro. Here, recombinant V_sp domain alone is shown to form trimers with a significant α‐helix content and to have a thermal stability of T_m = 45°C. Examination of a new construct shows that the V_sp domain facilitates efficient in vitro refolding only when it is located N‐terminal to the triple‐helix domain but not when C‐terminal to the triple‐helix domain. Fusion of the V_sp domain N‐terminal to a heterologous (Gly‐Xaa‐Yaa)_n sequence from Clostridium perfringens led to correct folding and refolding of this triple‐helix, which was unable to fold into a triple‐helical, soluble protein on its own. These results suggest that placement of a functional trimerization module adjacent to a heterologous Gly‐Xaa‐Yaa repeating sequence can lead to proper folding in some cases but also shows specificity in the relative location of the trimerization and triple‐helix domains. This information about their modular nature can be used in the production of novel types of bacterial collagen for biomaterial applications.     

Dimerization effects on coacervation property of an elastin‐derived synthetic peptide (FPGVG)5

Elastin, a core protein of the elastic fibers, exhibits the coacervation (temperature‐dependent reversible association/dissociation) under physiological conditions. Because of this characteristic, elastin and elastin‐derived peptides have been considered to be useful as base materials for developing various biomedical products, skin substitutes, synthetic vascular grafts, and drug delivery systems. Although elastin‐derived polypeptide (Val‐Pro‐Gly‐Val‐Gly)_n also has been known to demonstrate coacervation property, a sufficiently high (VPGVG)_n repetition number (n > 40) is required for coacervation. In the present study, a series of elastin‐derived peptide (Phe‐Pro‐Gly‐Val‐Gly)₅ dimers possessing high coacervation potential were newly developed. These novel dimeric peptides exhibited coacervation at significantly lower concentrations and temperatures than the commonly used elastin‐derived peptide analogs; this result suggests that the coacervation ability of the peptides is enhanced by dimerization. Circular dichroism (CD) measurements indicate that the dimers undergo similar temperature‐dependent and reversible conformational changes when coacervation occurs. The molecular dynamics calculation results reveal that the sheet‐turn‐sheet motif involving a type II β‐turn‐like structure commonly observed among the dimers and caused formation of globular conformation of them. These synthesized peptide dimers may be useful not only as model peptides for structural analysis of elastin and elastin‐derived peptides, but also as base materials for developing various temperature‐sensitive biomedical and industrial products. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

A high-resolution 13C-nmr study of collagenlike polypeptides and collagen fibrils in solid state studied by the cross-polarization–magic angle-spinning method. Manifestation of conformation-dependent 13C chemical shifts and application to conformational characterization

We have recorded high-resolution ¹³C-nmr spectra of collagen fibrils in the solid state by the cross-polarization–magic-angle-spinning(CP–MAS)method and analyzed the spectra with reference to those of collagenlike polypeptides. We used two kinds of model polypeptides to obtain reference ¹³C chemical shifts of major amino acid residues of collagen (Gly, Pro, Ala, and Hyp): the 3₁-helical polypeptides [(Gly)_nII, (Pro)_nII, (Hyp)_n, and (Ala? Gly? Gly)_nII], and the triple-helical polypeptides [(Pro? Gly? Pro)_n and (Pro? Ala? Gly)_n]. Examination of the ¹³C chemical shifts of these polypeptides, together with our previous data, showed that the ¹³C chemical shifts of individual amino acid residues are the same, within experimental error (±0.5 ppm), among different polypeptides with different primary sequences, if the conformations are the same. We found that the ¹³C chemical shifts of Ala residues of the 3₁-helical (Ala? Gly? Gly)_n and triple-helical (Pro? Ala? Gly)_n are significantly displaced, compared with those of the α-helix, β-sheet, and silk I form, and can be utilized as excellent probes to examine conformational features of collagen-like polypeptides. Further, the ¹³C chemical shifts of Gly and Pro residues in the triple-helical polypeptides are substantially displaced from those found in (Gly)_nII and (Pro)_nII of the 3₁-helix, reflecting further conformational change from the 3₁-helix to the supercoiled triple helix. In particular, the ¹³C chemical shifts of Gly C ? O carbons of the triple-helical polypeptides are substantially displaced upfield (4.1–5.1 ppm), with respect to those of the 3₁-helical polypeptides. These displacements are interpreted by that Gly C ? O of the former is not involved in NH …? O ? C hydrogen bonds, while this carbon of the latter is linked by these kinds of hydrogen bonds. On the basis of these ¹³C chemical shifts, as reference data for the collagenlike structure, we were able to assign the ¹³C-nmr peaks of Gly, Ala, Pro, and Hyp residues of collagen fibrils, which are in good agreement with the values expected from the model polypeptides mentioned above. We also discuss a plausible conformational change of collagen fibrils during denaturation.     

High efficacy and minimal peptide required for the anti‐angiogenic and anti‐hepatocarcinoma activities of plasminogen K5

Kringle 5(K5) is the fifth kringle domain of human plasminogen and its anti‐angiogenic activity is more potent than angiostatin that includes the first four kringle fragment of plasminogen. Our recent study demonstrated that K5 suppressed hepatocarcinoma growth by anti‐angiogenesis. To find high efficacy and minimal peptide sequence required for the anti‐angiogenic and anti‐tumour activities of K5, two deletion mutants of K5 were generated. The amino acid residues outside kringle domain of intact K5 (Pro452‐Ala542) were deleted to form K5mut1(Cys462‐Cys541). The residue Cys462 was deleted again to form K5mut2(Met463‐Cys541). K5mut1 specifically inhibited proliferation, migration and induced apoptosis of endothelial cells, with an apparent two‐fold enhanced activity than K5. Intraperitoneal injection of K5mut1 resulted in more potent tumour growth inhibition and microvessel density reduction than K5 both in HepA‐grafted and Bel7402‐xenografted hepatocarcinoma mouse models. These results suggested that K5mut1 has more potent anti‐angiogenic activity than intact K5. K5mut2, which lacks only the amino terminal cysteine of K5mut1, completely lost the activity, suggesting that the kringle domain is essential for the activity of K5. The activity was enhanced to K5mut1 level when five acidic amino acids of K5 in NH₂ terminal outside kringle domain were replaced by five serine residues (K5mut3). The shielding effect of acidic amino acids may explain why K5mut1 has higher activity. K5, K5mut1 and K5mut3 held characteristic β‐sheet spectrum while K5mut2 adopted random coil structure. These results suggest that K5mut1 with high efficacy is the minimal active peptide sequence of K5 and may have therapeutic potential in liver cancer.     

The primary structure of the COOH-terminal half of cholera toxin subunit A1 containing the ADP-ribosylation site

The sequence of 96 amino acid residues from the COOH-terminus of the active subunit of cholera toxin, A₁, has been determined as PheAsnValAsnAspVal LeuGlyAlaTyrAlaProHisProAsxGluGlu GluValSerAlaLeuGlyGly IleProTyrSerGluIleTyrGlyTrpTyrArg ValHisPheGlyValLeuAsp GluGluLeuHisArgGlyTyrArgAspArgTyr TyrSerAsnLeuAspIleAla ProAlaAlaAspGlyTyrGlyLeuAlaGlyPhe ProProGluHisArgAlaTrp ArgGluGluProTrpIleHisHisAlaPro ProGlyCysGlyAsnAlaProArg(OH). This is the largest fragment obtained by BrCN cleavage of the subunit A₁ (M_r 23,000), and has previously been indicated to contain the active site for the adenylate cyclase-stimulating activity. Unequivocal identification of the COOH-terminal structure was achieved by separation and analysis of the terminal peptide after the specific chemical cleavage at the only cysteine residue in A₁ polypeptide. The site of self ADP-ribosylation in the A₁ subunit [C. Y. Lai, Q.-C. Xia, and P. T. Salotra (1983) Biochem. Biophys. Res. Commun.116, 341–348] has now been identified as Arg-50 of this peptide, 46 residues removed from the COOH-terminus. The cysteine that forms disulfide bridge to A₂ subunit in the holotoxin is at position 91.     

Identification of the amino acid residues and domains in the cysteine‐rich protein of Chinese wheat mosaic virus that are important for RNA silencing suppression and subcellular localization

Cysteine‐rich proteins (CRPs) encoded by some plant viruses in diverse genera function as RNA silencing suppressors. Within the N‐terminal portion of CRPs encoded by furoviruses, there are six conserved cysteine residues and a Cys–Gly–X–X–His motif (Cys, cysteine; Gly, glycine; His, histidine; X, any amino acid residue) with unknown function. The central domains contain coiled‐coil heptad amino acid repeats that usually mediate protein dimerization. Here, we present evidence that the conserved cysteine residues and Cys–Gly–X–X–His motif in the CRP of Chinese wheat mosaic virus (CWMV) are critical for protein stability and silencing suppression activity. Mutation of a leucine residue in the third coiled‐coil heptad impaired CWMV CRP activity for suppression of local silencing, but not for the promotion of cell‐to‐cell movement of Potato virus X (PVX). In planta and in vitro analysis of wild‐type and mutant proteins indicated that the ability of the CRP to self‐interact was correlated with its suppression activity. Deletion of up to 40 amino acids at the C‐terminus did not abolish suppression activity, but disrupted the association of CRP with endoplasmic reticulum (ER), and reduced its activity in the enhancement of PVX symptom severity. Interestingly, a short region in the C‐terminal domain, predicted to form an amphipathic α‐helical structure, was responsible for the association of CWMV CRP with ER. Overall, our results demonstrate that the N‐terminal and central regions are the functional domains for suppression activity, whereas the C‐terminal region primarily functions to target CWMV CRP to the ER.     

A peptide study of the relationship between the collagen triple-helix and amyloid

Type XXV collagen, or collagen‐like amyloidogenic component, is a component of amyloid plaques, and recent studies suggest this collagen affects amyloid fibril elongation and has a genetic association with Alzheimer's disease. The relationship between the collagen triple helix and amyloid fibrils was investigated by studying peptide models, including a very stable triple helical peptide (Pro‐Hyp‐Gly)₁₀, an amyloidogenic peptide GNNQQNY, and a hybrid peptide where the GNNQQNY sequence was incorporated between (GPO)_n domains. Circular dichroism and nuclear magnetic resonance (NMR) spectroscopy showed the GNNQQNY peptide formed a random coil structure, whereas the hybrid peptide contained a central disordered GNNQQNY region transitioning to triple‐helical ends. Light scattering confirmed the GNNQQNY peptide had a high propensity to form amyloid fibrils, whereas amyloidogenesis was delayed in the hybrid peptide. NMR data suggested the triple‐helix constraints on the GNNQQNY sequence within the hybrid peptide may disfavor the conformational change necessary for aggregation. Independent addition of a triple‐helical peptide to the GNNQQNY peptide under aggregating conditions delayed nucleation and amyloid fibril growth. The inhibition of amyloid nucleation depended on the Gly‐Xaa‐Yaa sequence and required the triple‐helix conformation. The inhibitory effect of the collagen triple‐helix on an amyloidogenic sequence, when in the same molecule or when added separately, suggests Type XXV collagen, and possibly other collagens, may play a role in regulating amyloid fibril formation. © 2012 Wiley Periodicals, Inc. Biopolymers 97: 795–806, 2012.     

The effect of deuterium oxide on the stability of the collagen model peptides H‐(Pro‐Pro‐Gly)10‐OH,H‐(Gly‐Pro‐4(R)Hyp)9‐OH,and Type I collagen

The collagen triple helix has a larger accessible surface area per molecular mass than globular proteins, and therefore potentially more water interaction sites. The effect of deuterium oxide on the stability of collagen model peptides and Type I collagen molecules was analyzed by circular dichroism and differential scanning calorimetry. The transition temperatures (T_m) of the protonated peptide (Pro‐Pro‐Gly)₁₀ were 25.4 and 28.7°C in H₂O and D₂O, respectively. The increase of the T_m of (Pro‐Pro‐Gly)₁₀ measured calorimetrically at 1.0°C min^?1 in a low pH solution from the protonated to the deuterated solvent was 5.1°C. The increases of the T_m for (Gly‐Pro‐4(R)Hyp)₉ and pepsin‐extracted Type I collagen were measured as 4.2 and 2.2°C, respectively. These results indicated that the increase in the T_m in the presence of D₂O is comparable to that of globular proteins, and much less than reported previously for collagen model peptides [Gough and Bhatnagar, J Biomol Struct Dyn 1999, 17, 481–491]. These experimental results suggest that the interaction of water molecules with collagen is similar to the interaction of water with globular proteins, when the ratio of collagen to water is very small and collagen is monomerically dispersed in the solvent. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 93–101, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Biodeterioration of collagen-based cultural relics: A review

Natural collagen-based cultural relics such as parchment and leather are susceptible to the storage environment, including temperature, relative humidity, pollutants, and microorganisms, resulting in the deterioration of the main components of collagen, keratin, tannins, lipids, oils and tanning regents. Significant changes might occur in the appearance, composition and internal structure, accompanied by the impaired physical properties such as thermal stability, flexibility, and tensile strength. Biodeterioration is one of the main factors affecting the long-term storage of parchment and leather artifacts, particularly in environments with high relative humidity, due to the proliferation and growth of bacteria or fungi. This review focuses on the common microbial communities on the parchment and leather artifacts. The biodeterioration mechanism is discussed, which will shed light onto the future research of collagen-based cultural relics.     

Steric and electronic interactions controlling the cis/trans isomer equilibrium at X‐pro tertiary amide motifs in solution

A systematic understanding of the noncovalent interactions that influence the structures of the cis conformers and the equilibrium between the cis and the trans conformers, of the X‐Pro tertiary amide motifs, is presented based on analyses of ¹H‐, ¹³C‐NMR and FTIR absorption spectra of two sets of homologous peptides, X‐Pro‐Aib‐OMe and X‐Pro‐NH‐Me (where X is acetyl, propionyl, isobutyryl and pivaloyl), in solvents of varying polarities. First, this work shows that the cis conformers of any X‐Pro tertiary amide motif, including Piv‐Pro, are accessible in the new motifs X‐Pro‐Aib‐OMe, in solution. These conformers are uniquely observable by FTIR spectroscopy at ambient temperatures and by NMR spectroscopy from temperatures as high as 273 K. This is made possible by the persistent presence of n_i‐1→π_i* interactions at Aib, which also influence the disappearance of steric effects at these cis X‐Pro rotamers. Second, contrary to conventional understanding, the energy contribution of steric effects to the cis/trans equilibrium at the X‐Pro motifs is found to be nonvariant (0.54 ± 0.02 kcal/mol) with increase in steric bulk on the X group. Third, the current studies provide direct evidence for the weak intramolecular interactions namely the n_i‐1→π_i*, the N_Pro???H_i+1 (C₅a), and the C₇ hydrogen bond that operate and influence the structures, stabilities, and dynamics between different conformational states of X‐Pro tertiary amide motifs. NMR and IR spectral data suggest that the cis conformers of X‐Pro motifs are ensembles of short‐lived rotamers about the C′_X–N_Pro bond. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 66–77, 2014.     

Structural requirements essential for elastin coacervation: favorable spatial arrangements of valine ridges on the three‐dimensional structure of elastin‐derived polypeptide (VPGVG)n

The elastin precursor tropoelastin possesses a number of polymeric peptides with repeating 3–9 mer sequences. One of these is the pentapeptide Val‐Pro‐Gly‐Val‐Gly (VPGVG) present in almost all animal species, and its polymer (VPGVG)n coacervates just as does tropoelastin. In the present study, in order to explore the structural requirements essential for coacervation, (VPGVG)n and its shortened repeat analogs (VPGV)n, (VPG)n, and (PGVG)n were synthesized and their structural properties were investigated. In our turbidity measurements, (VPGVG)n demonstrated complete reversible coacervation in agreement with previous findings. The Gly⁵‐deleted polymer (VPGV)n also achieved self‐association, though the onset of self‐association occurred at a lower temperature. However, the dissociation of (VPGV)n upon temperature lowering was found to occur in a three‐step process; the Val_i⁴‐Val_i+1¹ structure arising in the VPGV polypeptide appeared to perturb the dissociation. No self‐association was observed for (VPG)n or (PGVG)n repeats. Spectroscopic measurements by CD, FT‐IR, and ¹H‐NMR showed that the (VPGV)n and (VPG)n both assumed ordered structures similar to that of (VPGVG)n. These results demonstrated that VPGVG is a structural element essential to achieving the β‐spiral structure required for self‐association followed by coacervation, probably due to the ideal spatial arrangement of the hydrophobic Val residues. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Heterotrimeric collagen peptides containing functional epitopes. Synthesis of single‐stranded collagen type I peptides related to the collagenase cleavage site

Synthetic collagen peptides containing larger numbers of Gly‐Pro‐Hyp repeats are difficult to purify by standard chromatographic procedures. Therefore, efficient strategies are required for the synthesis of higher molecular weight collagen‐type peptides. Applying the Fmoc/tBu chemistry, a comparative analysis of the standard stepwise chain elongation procedure on solid support with the procedure based on the use of the synthons Fmoc‐Gly‐Pro‐Hyp(tBu)‐OH and Fmoc‐Pro‐Hyp‐Gly‐OH was performed. The crude products resulting from the stepwise elongation procedure and from the use of Fmoc‐Gly‐Pro‐Hyp(tBu)‐OH clearly revealed large amounts of microheterogeneities that result from incomplete imino acid acylation as well as from diketopiperazine formation with cleavage of Gly‐Pro units from the growing peptide chain. Conversely, by the use of the Fmoc‐Pro‐Hyp‐Gly‐OH synthon, the quality of the crude products was significantly improved; moreover, protection of the Hyp side chain hydroxyl function is not required using the Fmoc/tBu strategy. With this optimized synthetic procedure, relatively large collagen‐type peptides were obtained in satisfactory yields as highly homogeneous compounds. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

High‐molecular‐weight poly(Gly‐Val‐Gly‐Val‐Pro) synthesis through microwave irradiation

In this study, we synthesized a polypeptide from its pentapeptide unit using microwave irradiation. Effective methods for polypeptide synthesis from unit peptides have not been reported. Here, we used a key elastin peptide, H‐GlyValGlyValPro‐OH (GVGVP), as the monomer peptide. It is difficult to obtain poly(Gly‐Val‐Gly‐Val‐Pro) (poly(GVGVP)) from the pentapeptide unit of elastin, GVGVP, via polycondensation. Poly(GVGVP) prepared from genetically recombinant Escherichia coli is a well‐known temperature‐sensitive polypeptide, and this temperature sensitivity is known as the lower critical solution temperature. When microwave irradiation was performed in the presence of various additives, the pentapeptide (GVGVP) polycondensation reaction proceeded smoothly, resulting in a product with a high molecular weight in a relatively good yield. The reaction conditions, like microwave irradiation, coupling agents, and solvents, were optimized to increase the reaction efficiency. The product exhibited a molecular weight greater than Mr 7000. Further, the product could be synthesized on a gram scale. The synthesized polypeptide exhibited a temperature sensitivity that was similar to that of poly(GVGVP) prepared from genetically recombinant E. coli. Therefore, this technique offers a facile and quick approach to prepare polypeptides in large amounts. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

The amino acid sequence of human chorionic gonadotropin. The alpha subunit and beta subunit.

The amino acid sequences of both the alpha and beta subunits of human chorionic gonadotropin have been determined. The amino acid sequence of the alpha subunit is: Ala - Asp - Val - Gln - Asp - Cys - Pro - Glu - Cys-10 - Thr - Leu - Gln - Asp - Pro - Phe - Ser - Gln-20 - Pro - Gly - Ala - Pro - Ile - Leu - Gln - Cys - Met - Gly-30 - Cys - Cys - Phe - Ser - Arg - Ala - Tyr - Pro - Thr - Pro-40 - Leu - Arg - Ser - Lys - Lys - Thr - Met - Leu - Val - Gln-50 - Lys - Asn - Val - Thr - Ser - Glu - Ser - Thr - Cys - Cys-60 - Val - Ala - Lys - Ser - Thr - Asn - Arg - Val - Thr - Val-70 - Met - Gly - Gly - Phe - Lys - Val - Glu - Asn - His - Thr-80 - Ala - Cys - His - Cys - Ser - Thr - Cys - Tyr - Tyr - His-90 - Lys - Ser. Oligosaccharide side chains are attached at residues 52 and 78. In the preparations studied approximately 10 and 30% of the chains lack the initial 2 and 3 NH2-terminal residues, respectively. This sequence is almost identical with that of human luteinizing hormone (Sairam, M. R., Papkoff, H., and Li, C. H. (1972) Biochem. Biophys. Res. Commun. 48, 530-537). The amino acid sequence of the beta subunit is: Ser - Lys - Glu - Pro - Leu - Arg - Pro - Arg - Cys - Arg-10 - Pro - Ile - Asn - Ala - Thr - Leu - Ala - Val - Glu - Lys-20 - Glu - Gly - Cys - Pro - Val - Cys - Ile - Thr - Val - Asn-30 - Thr - Thr - Ile - Cys - Ala - Gly - Tyr - Cys - Pro - Thr-40 - Met - Thr - Arg - Val - Leu - Gln - Gly - Val - Leu - Pro-50 - Ala - Leu - Pro - Gin - Val - Val - Cys - Asn - Tyr - Arg-60 - Asp - Val - Arg - Phe - Glu - Ser - Ile - Arg - Leu - Pro-70 - Gly - Cys - Pro - Arg - Gly - Val - Asn - Pro - Val - Val-80 - Ser - Tyr - Ala - Val - Ala - Leu - Ser - Cys - Gln - Cys-90 - Ala - Leu - Cys - Arg - Arg - Ser - Thr - Thr - Asp - Cys-100 - Gly - Gly - Pro - Lys - Asp - His - Pro - Leu - Thr - Cys-110 - Asp - Asp - Pro - Arg - Phe - Gln - Asp - Ser - Ser - Ser - Ser - Lys - Ala - Pro - Pro - Pro - Ser - Leu - Pro - Ser-130 - Pro - Ser - Arg - Leu - Pro - Gly - Pro - Ser - Asp - Thr-140 - Pro - Ile - Leu - Pro - Gln. Oligosaccharide side chains are found at residues 13, 30, 121, 127, 132, and 138. The proteolytic enzyme, thrombin, which appears to cleave a limited number of arginyl bonds, proved helpful in the determination of the beta sequence.     

Higher order structure of short collagen model peptides attached to dendrimers and linear polymers

Collagen, which is used as a biomaterial, is the most abundant protein in mammals. We have previously reported that a dendrimer modified with collagen model peptides, (Gly‐Pro‐Pro)₅, formed a collagen‐like triple‐helical structure, showing thermal reversibility. In this study, various collagen‐mimic dendrimers of different generations and at different binding ratios were synthesized, to investigate the relationship between the peptide clustering effect and the higher order structure formation. The formation of the higher order structure was influenced by the binding ratios of the peptide to the dendrimer, but was not influenced by the dendrimer generation. A spacer, placed between the dendrimer terminal group and the peptide, negatively contributed to the formation of the higher order structure. The collagen model peptides were also attached to poly(allylamine) (PAA) and poly‐L ‐lysine (poly(Lys)) to compare them with the collagen‐mimic dendrimers. The PAA‐based collagen‐mimic compound, bearing more collagen model peptides than the dendrimer, exhibited a thermally stable higher order structure. In contrast, this was not observed for the collagen‐mimic polymers based on poly(Lys). Therefore, dendrimers and vinyl polymers act as a scaffold for collagen model peptides and subsequently induce higher order structures. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 640–648, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com