Metal ion specificities for folding and cleavage activity in the Schistosoma hammerhead ribozyme

The effects of various metal ions on cleavage activity and global folding have been studied in the extended Schistosoma hammerhead ribozyme. Fluorescence resonance energy transfer was used to probe global folding as a function of various monovalent and divalent metal ions in this ribozyme. The divalent metals ions Ca²⁺, Mg²⁺, Mn²⁺, and Sr²⁺ have a relatively small variation (less than sixfold) in their ability to globally fold the hammerhead ribozyme, which contrasts with the very large difference (>10,000-fold) in apparent rate constants for cleavage for these divalent metal ions in single-turnover kinetic experiments. There is still a very large range (>4600-fold) in the apparent rate constants for cleavage for these divalent metal ions measured in high salt (2 M NaCl) conditions where the ribozyme is globally folded. These results demonstrate that the identity of the divalent metal ion has little effect on global folding of the Schistosoma hammerhead ribozyme, whereas it has a very large effect on the cleavage kinetics. Mechanisms by which the identity of the divalent metal ion can have such a large effect on cleavage activity in the Schistosoma hammerhead ribozyme are discussed.     

Structural metals in the group I intron: a ribozyme with a multiple metal ion core

Metal ions play key roles in the folding and function for many structured RNAs, including group I introns. We determined the X-ray crystal structure of the Azoarcus bacterial group I intron in complex with its 5' and 3' exons. In addition to 222 nucleotides of RNA, the model includes 18 Mg(2+) and K(+) ions. Five of the metals bind within 12 A of the scissile phosphate and coordinate the majority of the oxygen atoms biochemically implicated in conserved metal-RNA interactions. The metals are buried deep within the structure and form a multiple metal ion core that is critical to group I intron structure and function. Eight metal ions bind in other conserved regions of the intron structure, and the remaining five interact with peripheral structural elements. Each of the 18 metals mediates tertiary interactions, facilitates local bends in the sugar-phosphate backbone or binds in the major groove of helices. The group I intron has a rich history of biochemical efforts aimed to identify RNA-metal ion interactions. The structural data are correlated to the biochemical results to further understand the role of metal ions in group I intron structure and function.     

Conservation of helical structure contributes to functional metal ion interactions in the catalytic domain of ribonuclease P RNA

Like protein enzymes, catalytic RNAs contain conserved structure motifs important for function. A universal feature of the catalytic domain of ribonuclease P RNA is a bulged-helix motif within the P1-P4 helix junction. Here, we show that changes in bulged nucleotide identity and position within helix P4 affect both catalysis and substrate binding, while a subset of the mutations resulted only in catalytic defects. We find that the proximity of the bulge to sites of metal ion coordination in P4 is important for catalysis; moving the bulge distal to these sites and deleting it had similarly large effects, while moving it proximal to these sites had only a moderate effect on catalysis. To test whether the effects of the mutations are linked to metal ion interactions, we used terbium-dependent cleavage of the phosphate backbone to probe metal ion-binding sites in the wild-type and mutant ribozymes. We detect cleavages at specific sites within the catalytic domain, including helix P4 and J3/4, which have previously been shown to participate directly in metal ion interactions. Mutations introduced into P4 cause local changes in the terbium cleavage pattern due to alternate metal ion-binding configurations with the helix. In addition, a bulge deletion mutation results in a 100-fold decrease in the single turnover cleavage rate constant at saturating magnesium levels, and a reduced affinity for magnesium ions important for catalysis. In light of the alternate terbium cleavage pattern in P4 caused by bulge deletion, this decreased ability to utilize magnesium ions for catalysis appears to be due to localized structural changes in the ribozyme's catalytic core that weaken metal ion interactions in P4 and J3/4. The information reported here, therefore, provides evidence that the universal conservation of the P4 structure is based in part on optimization of metal ion interactions important for catalysis.     

Structural requirement for Mg2+ binding in the group I intron core

Divalent metal ions are required for splicing of group I introns, but their role in maintaining the structure of the active site is still under investigation. Ribonuclease and hydroxyl radical footprinting of a small group I intron from Azoarcus pre-tRNA(Ile) showed that tertiary interactions between helical domains are stable in a variety of cations. Only Mg(2+), however, induced a conformational change in the intron core that correlates with self-splicing activity. Three metal ion binding sites in the catalytic core were identified by Tb(III)-dependent cleavage. Two of these are near bound substrates in a three-dimensional model of the ribozyme. A third metal ion site is near an A minor motif in P3. In the pre-tRNA, Tb(3+) cleavage was redirected to the 5' and 3' splice sites, consistent with metal-dependent activation of splice site phosphodiesters. The results show that many counterions induce global folding, but organization of the group I active site is specifically linked to Mg(2+) binding at a few sites.     

Threshold Occupancy and Specific Cation Binding Modes in the Hammerhead Ribozyme Active Site are Required for Active Conformation

The relationship between formation of active in-line attack conformations and monovalent (Na⁺) and divalent (Mg²⁺) metal ion binding in hammerhead ribozyme (HHR) has been explored with molecular dynamics simulations. To stabilize repulsions between negatively charged groups, different requirements of the threshold occupancy of metal ions were observed in the reactant and activated precursor states both in the presence and in the absence of a Mg²⁺ in the active site. Specific bridging coordination patterns of the ions are correlated with the formation of active in-line attack conformations and can be accommodated in both cases. Furthermore, simulation results suggest that the HHR folds to form an electronegative recruiting pocket that attracts high local concentrations of positive charge. The present simulations help to reconcile experiments that probe the metal ion sensitivity of HHR catalysis and support the supposition that Mg²⁺, in addition to stabilizing active conformations, plays a specific chemical role in catalysis.     

小型核酶的结构和催化机理

自然界存在的小型核酶主要有锤头型核酶、发夹型核酶、肝炎δ病毒（HDV）核酶和VS核酶.锤头型核酶由3个短螺旋和1个广义保守的连接序列组成;发夹型核酶的催化中心由两个肩并肩挨着的区域构成;HDV核酶折叠成包含五个螺旋臂（P1～P4）的双结结构;VS核酶由五个螺旋结构组成,这些螺旋结构通过两个连接域连接起来.小型核酶的催化机理与其分子结构密切相关.金属离子或特定碱基都可作为催化反应的关键成分.锤头型核酶的催化必须有金属离子（尤其是二价金属离子）参与,而发夹型核酶则完全不需要金属离子.基因组HDV核酶进行催化时要有金属离子和特定碱基互相配合.     

The tertiary structure of group II introns: implications for biological function and evolution

Group II introns are some of the largest ribozymes in nature, and they are a major source of information about RNA assembly and tertiary structural organization. These introns are of biological significance because they are self-splicing mobile elements that have migrated into diverse genomes and played a major role in the genomic organization and metabolism of most life forms. The tertiary structure of group II introns has been the subject of many phylogenetic, genetic, biochemical and biophysical investigations, all of which are consistent with the recent crystal structure of an intact group IIC intron from the alkaliphilic eubacterium Oceanobacillus iheyensis. The crystal structure reveals that catalytic intron domain V is enfolded within the other intronic domains through an elaborate network of diverse tertiary interactions. Within the folded core, DV adopts an activated conformation that readily binds catalytic metal ions and positions them in a manner appropriate for reaction with nucleic acid targets. The tertiary structure of the group II intron reveals new information on motifs for RNA architectural organization, mechanisms of group II intron catalysis, and the evolutionary relationships among RNA processing systems. Guided by the structure and the wealth of previous genetic and biochemical work, it is now possible to deduce the probable location of DVI and the site of additional domains that contribute to the function of the highly derived group IIB and IIA introns.     

Aminoglycoside binding displaces a divalent metal ion in a tRNA-neomycin B complex

Aminoglycosides bind to RNA and interfere with its function, and it has been suggested that aminoglycoside binding to RNA displaces essential divalent metal ions. Here we demonstrate that addition of various aminoglycosides inhibited Pb2+-induced cleavage of yeast tRNA(Phe). Cocrystallization of yeast tRNA(Phe) and an aminoglycoside, neomycin B, resulted in crystals that diffracted to 2.6 A and the structure of the complex was solved by molecular replacement. The structure shows that the neomycin B binding site overlaps with known divalent metal ion binding sites in yeast tRNA(Phe), providing direct evidence for the hypothesis that aminoglycosides displace metal ions. Additionally, the neomycin B binding site overlaps with major determinants for Escherichia coli phenylalanyl-tRNA-synthetase. Here we present data demonstrating that addition of neomycin B inhibited aminoacylation of E. coli tRNA(Phe) in the mid microM range. Given that aminoglycoside and metal ion binding sites overlap, we discuss that aminoglycosides can be considered as 'metal mimics'.     

Metal ion-N7 coordination in a ribozyme branch domain by NMR

The N7 of purine nucleotides presents one of the most dominant metal ion binding sites in nucleic acids. However, the interactions between kinetically labile metal ions like Mg²⁺ and these nitrogen atoms are inherently difficult to observe in large RNAs. Rather than using the insensitive direct ¹⁵N detection, here we have used ²J-[¹H,¹⁵N]-HSQC (Heteronuclear Single Quantum Coherence) NMR experiments as a fast and efficient method to specifically observe and characterize such interactions within larger RNA constructs. Using the 27 nucleotides long branch domain of the yeast-mitochondrial group II intron ribozyme Sc.ai5γ as an example, we show that direct N7 coordination of a Mg²⁺ ion takes place in a tetraloop nucleotide. A second Mg²⁺ ion, located in the major groove at the catalytic branch site, coordinates mainly in an outer-sphere fashion to the highly conserved flanking GU wobble pairs but not to N7 of the sandwiched branch adenosine.     

Inhibition of In Vitro Splicing of a Group I Intron of Pneumocystis carinii

Unlike its mammalian hosts, the opportunistic fungal pathogen Pneumocystis carinii harbors group I self-splicing introns in its chromosomal genes encoding rRNA. This difference between pathogen and host suggests that intron splicing is a promising target for chemotherapy. We have found that intron splicing in vitro is inhibited by the anti- Pneumocystis agent pentamidine and by a series of pentamidine analogues, as well as by some aminoglycosides, tetracycline, L-arginine and ethidium bromide. Further studies will be needed to determine if this is the mechanism of action of pentamidine against P. carinii .     

利用糖芯片技术检测氨基糖苷类抗生素与RNAs和蛋白质之间的相互作用

氨基糖苷类抗生素是一类广谱型抗细菌感染药物,其不断增加的细菌耐药性很大程度上限制了它的临床应用,研究和开发新型氨基糖苷类抗生素具有重要意义。将氨基糖苷类抗生素固定到玻璃片基上,制成糖芯片,再分别与荧光标记的RNAs和蛋白质杂交,通过分析杂交后的荧光信号强度检测它们之间的相互作用。结果显示,氨基糖苷类抗生素芯片可以特异性地与r RNA的A位点模拟物、I型核酶和蛋白酶结合。因此糖芯片技术不仅可以检测氨基糖苷类抗生素与r RNAs的特异性结合,而且可以应用于寻找新型RNA结合配体的研究,为快速鉴定和筛选可紧密结合RNA靶标且毒性较低的新型氨基糖苷类抗生素奠定了一定的基础。     

Potassium ions modulate a G-quadruplex-ribozyme's activity

Hepatitis delta virus ribozyme folds into a tightly packed tertiary structure. However, unlike other ribozymes, it does not appear to be able to follow alternative folding pathways. Molecular engineering of the hepatitis delta virus ribozyme led to the development of a ribozyme possessing an endoribonuclease activity that is under the control of a G-quadruplex structure (i.e., a G-quartzyme). This latter species represents an entirely new class of ribozyme. Mutants of this ribozyme were then generated in order to shed light on the modulation of the cleavage activity caused by the presence of the G-quadruplex structure. Kinetic characterization of the G-quartzyme was performed under various single turnover conditions. It was found to be active only in the presence of potassium cations that act as counter ions in the positioning of the four coplanar guanines that form the building block of the G-quadruplex structure. The G-quartzyme behaves as an allosteric ribozyme, with the potassium cations acting as positive effectors with a Hill coefficient of 2.9 +/- 0.2. The conformation transition caused by the presence of the potassium ions is supported by enzymatic and chemical probing of both the inactive (off) and active (on) structures. This study shows that it is possible to interfere with the tight structure of the hepatitis delta virus ribozyme by adding an unusual, stable structure. To our knowledge, the G-quartzyme is the sole ribozyme that exhibits a monovalent cation-dependent activity.     

Metal ion coordination to 2′ functionality of guanosine mediates substrate-guanosine coupling in group I ribozymes: implications for conserved role of metal ions and for variability in RNA folding in ribozyme catalysis

Divalent metal ions are necessary in the self splicing reaction of group I introns, and we report that metal interaction to the 2′ position of guanosine for the Azoarcus ribozyme is required for catalysis. Moreover, this metal coordination promotes the guanosine-substrate coupled binding to the ribozyme, which is another conserved feature seen across phylogenetic boundaries. Typically there is a 4-9-fold difference in binding of G to E_free versus E · S. In the Tetrahymena ribozyme’s case this substrate-guanosine communication was attributed to conformational change(s) that lead to cooperative binding of the two cofactors which is almost nonexistent at low temperatures (4 °C). In the prokaryotic Azoarcus ribozyme we also see a 4-5-fold difference in binding of the guanosine/substrate to E_free versus E · G or E · S at 10 °C that is attributed to guanosine-substrate coupling. This coupling is diminished when the metal (Mg²⁺) coordination to the 2′ is disrupted with use of 2′-amino-2′-deoxyguanosine. The coupling is restored when softer Mn²⁺ ions are added to the buffer. This evidence generalizes a model for group I ribozyme catalysis that involves metal coordination to the 2′ position of guanosine. However, we see one striking difference in that the guanosine-substrate coupling is reversed. In the Azoarcus system (10 °C) the guanosine/substrate binds 5-fold more tightly to E_free than to E · S or E · G, which is the opposite for Tetrahymena even when the later is run at 4 °C. One implication for this difference in coupling is that the Azoarcus is in a folded state well accommodated for guanosine or substrate binding. This initial binding actually causes a conformational change that retards the subsequent binding of the second cofactor, which contrasts what was found for the Tetrahymena ribozyme. These results indicate that while the role for the metal ions in the chemical catalysis is conserved across phylogenetic boundaries, there is variability in the folding pattern of the ribozyme that leads to phosphoryl transfer.     

Polymerase ribozyme efficiency increased by G/T-rich DNA oligonucleotides

The RNA world hypothesis states that the early evolution of life went through a stage where RNA served as genome and as catalyst. The replication of RNA world organisms would have been facilitated by ribozymes that catalyze RNA polymerization. To recapitulate an RNA world in the laboratory, a series of RNA polymerase ribozymes was developed previously. However, these ribozymes have a polymerization efficiency that is too low for self-replication, and the most efficient ribozymes prefer one specific template sequence. The limiting factor for polymerization efficiency is the weak sequence-independent binding to its primer/template substrate. Most of the known polymerase ribozymes bind an RNA heptanucleotide to form the P2 duplex on the ribozyme. By modifying this heptanucleotide, we were able to significantly increase polymerization efficiency. Truncations at the 3'-terminus of this heptanucleotide increased full-length primer extension by 10-fold, on a specific template sequence. In contrast, polymerization on several different template sequences was improved dramatically by replacing the RNA heptanucleotide with DNA oligomers containing randomized sequences of 15 nt. The presence of G and T in the random sequences was sufficient for this effect, with an optimal composition of 60% G and 40% T. Our results indicate that these DNA sequences function by establishing many weak and nonspecific base-pairing interactions to the single-stranded portion of the template. Such low-specificity interactions could have had important functions in an RNA world.     

Ground-state coordination of a catalytic metal to the scissile phosphate of a tertiary-stabilized Hammerhead ribozyme

Although the Hammerhead ribozyme (HHRz) has long been used as a model system in the field of ribozyme enzymology, several details of its mechanism are still not well understood. In particular, significant questions remain concerning the disposition and role of catalytic metals in the HHRz. Previous metal-rescue experiments using a "minimal" HHRz resulted in prediction of a catalytic metal that is bound in the A9/G10.1 site in the ground state of the reaction and that bridges to the scissile phosphate further along the reaction pathway. "Native" or extended HHRz constructs contain tertiary contacts that stabilize a more compact structure at moderate ionic strength. We performed Cd(2+) rescue experiments on an extended HHRz from Schistosoma mansoni using stereo-pure scissile phosphorothioate-substituted substrates in order to determine whether a metal ion makes contact with the scissile phosphate in the ground state or further along the reaction coordinate. Inhibition in Ca(2+)/Mg(2+) and rescue by thiophilic Cd(2+) was specific for the R(p)-S stereoisomer of the scissile phosphate. The affinity of the rescuing Cd(2+), measured in two different ionic strength backgrounds, increased fourfold to 17-fold when the pro-R(p) oxygen is replaced by sulfur. These data support a model in which the rescuing metal ion makes a ground-state interaction with the scissile phosphate in the native HHRz. The resulting model for Mg(2+) activation in the HHRz places a metal ion in contact with the scissile phosphate, where it may provide ground-state electrostatic activation of the substrate.     

Creative catalysis: pieces of the RNA world jigsaw

Novel ribozymes produced by in vitro selection techniques provide insights into the possible mechanisms of protein synthesis evolution. The availability of such ribozymes also paves the way for experiments to explore the evolution of RNA–protein enzymes.     

Hairpin ribozyme catalysis: A surface‐enhanced Raman spectroscopy study

The existence of an “RNA world” as an early step in the history of life increases the interest for the characterization of these biomolecules. The hairpin ribozyme studied here is a self‐cleaving/ligating motif found in the minus strand of the satellite RNA associated with Tobacco ringspot virus. Surface‐enhanced Raman spectroscopy (SERS) is a powerful tool to study trace amounts of RNA. In controlled conditions, a SERS signal is proportional to the amount of free residues adsorbed on the metal surface. On RNA cleavage, residues are unpaired and free to interact with metal. SERS procedures are used to monitor and quantify the catalysis of ribozyme cleavage at biological concentrations in real time; thus, they propose an interesting alternative to electrophoretic methods. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 384–390, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The hairpin ribozyme

The hairpin ribozyme is a naturally occurring RNA that catalyzes sequence-specific cleavage and ligation of RNA. It has been the subject of extensive biochemical and structural studies, perhaps the most detailed for any catalytic RNA to date. Comparison of the structures of its constituent domains free and fully assembled demonstrates that the RNA undergoes extensive structural rearrangement. This rearrangement results in a distortion of the substrate RNA that primes it for cleavage. This ribozyme is known to achieve catalysis employing exclusively RNA functional groups. Metal ions or other catalytic cofactors are not used. Current experimental evidence points to a combination of at least four mechanistic strategies by this RNA: (1) precise substrate orientation, (2) preferential transition state binding, (3) electrostatic catalysis, and (4) general acid base catalysis.     

An important role of G638 in the cis-cleavage reaction of the Neurospora VS ribozyme revealed by a novel nucleotide analog incorporation method

We describe a chemical coupling procedure that allows joining of two RNAs, one of which contains a site-specific base analog substitution, in the absence of divalent ions. This method allows incorporation of nucleotide analogs at specific positions even into large, cis-cleaving ribozymes. Using this method we have studied the effects of substitution of G638 in the cleavage site loop of the VS ribozyme with a variety of purine analogs having different functional groups and pK(a) values. Cleavage rate versus pH profiles combined with kinetic solvent isotope experiments indicate an important role for G638 in proton transfer during the rate-limiting step of the cis-cleavage reaction.