Sensitivity enhancement of spectral surface plasmon resonance biosensors for the analysis of protein arrays

A novel method for sensitivity enhancement of spectral surface plasmon resonance (SPR) biosensors was presented by reducing the refractive index of the sensing prism in the analysis of protein arrays. Sensitivity of spectral SPR biosensors with two different prisms (BK-7, fused silica) was analyzed by net shifts of resonance wavelength for specific interactions of GST–GTPase binding domain of p21-activated kinase-1 and anti-GST on a mixed thiol surface. Sensitivity was modulated by the refractive index of the sensing prism of the spectral SPR biosensors with the same incidence angle. The sensitivity of a spectral SPR biosensor with a fused silica prism was 1.6 times higher than that with a BK-7 prism at the same incidence angle of 46.2°. This result was interpreted by increment of the penetration depth correlated with evanescent field intensity at the metal/dielectric interface. Therefore, it is suggested that sensitivity enhancement is readily achieved by reducing the refractive index of the sensing prism of spectral SPR biosensors to be operated at long wavelength ranges for the analysis of protein arrays.     

Quantification of changing Pseudomonas aeruginosa sodA, htpX and mt gene abundance in response to trace metal toxicity: a potential in situ biomarker of environmental health

Sediment-dwelling prokaryotes play a vital role in determining the fate and speciation of metals, yet are also susceptible to the biological effects of trace metals. In this article, optimized DNA extraction and purification techniques and species-specific primers are used to assess the genetic incidence and abundance of metal detoxification and general stress genes of Pseudomonas aeruginosa to complement chemical analysis in inferring the severity of metal-contaminated sites along the Clark Fork River, Montana. Results show the highest incidence of candidate genes related to bacterial stress at the most polluted site, while multiple regression analysis demonstrated significant correlations (P<0.05, r(2)=0.9) between in situ metal concentrations (As, Cu and Zn), total gene incidence, and the incidence of metal detoxification genes. Furthermore, principal components plotting the incidence of genes related to metal resistance show clear separation of sites giving clear clusters on the basis of contamination. Quantification of three genes (sodA, htpX and mt) from surveyed sites found significantly higher (anova, P<0.05) copy numbers at the more contaminated sites compared with reference sites. The development of rapid microbial biomarker tools represents a significant advance in the field of environmental biomonitoring and the prediction of metal bioavailability.     

Incidence of metal sensitivity in patients with total joint replacements.

Sensitivity to chromium, cobalt, nickel, molybdenum, vanadium, and titanium was studied by patch tests in 50 patients who had received total joint replacements. Nineteen (38%) were sensitive to one or more of the metals. In 23 patients non-traumatic failure of the prosthesis had occurred, and 15 of these patients were sensitive to metal. Out of 27 patients with no evidence of prosthesis loosening, four were sensitive to nickel and cobalt or nickel only. Dermatological reactions occurred in 13 patients after surgery; in only eight, however, was there evidence of metal sensitivity. These findings indicate that metal-on-metal total joint replacements may sensitise the patient to metals contained in the prosthesis. Although there is a high incidence of prosthesis failure among metal-sensitive patients it remains uncertain whether the loosening causes the sensitisation or vice versa.     

Surface Plasmon Resonance-Based Tapered Fiber Optic Sensor: Sensitivity Enhancement by Introducing a Teflon Layer Between Core and Metal Layer

Surface plasmon resonance (SPR)-based tapered fiber optic sensor with Teflon as a dielectric sandwiched between metal and tapered fiber core is proposed. The sensitivity of the sensor has been maximized using different combinations of metal and Teflon layer thicknesses for a given taper ratio. The study shows that the sensitivity of the sensor with the introduction of dielectric (Teflon) increases with the increase in the taper ratio. The maximum sensitivity achieved for a given taper ratio is around 15 times higher than the general SPR-based fiber optic sensor.     

青菜幼苗体内几种保护酶的活性对Pb、Cd、Cr胁迫的反应研究

1 引言自从McCord在1969年第一次从牛红血细胞中发现超氧化物歧化酶(SOD)并且证明其功能是清除超氧化物以后,研究者们在植物细胞中也发现了这种酶,并且证明具有同样的功能.后来又发现植物细胞通过多种途径产生活性氧自由基,同时细胞也存在清除这些自由基的多种途径[5],两者形成平衡体系.但是,许多逆境因子如寒冷、干旱、干燥、水淹、重金属Al等都能影响植物体内活性氧代谢系统的平衡,产生大量的氧自由基,它们能够启动膜脂过氧化或膜脂脱脂作     

Metallic Nanowire Array–Polymer Hybrid Film for Surface Plasmon Resonance Sensitivity Enhancement and Spectral Range Enlargement

In this paper, the coupling interaction is investigated between a metallic nanowire array and a metal film under the Kretschmann condition. The plasmonic multilayer is composed of a metallic nanowire array embedded in a polymer layer positioned above a metal film, exploiting the classical surface plasmon resonance (SPR) configuration. We analyze the influence of various structural parameters of the metallic nanowire array on the SPR spectrum of thin metal film. The results show that the coupling interactions of nanowires with the metal film can greatly affect SPR resonance wavelength and increase SPR sensitivity. The coupling strength of metallic nanowire array and metal film also impacts resonance wavelength, which can be used to adjust SPR range but have little effect on its sensitivity. The results are confirmed using a dipole coupling resonance model of metallic nanowire. We demonstrated that this nanostructured hybrid structure can be used for high sensitivity SPR monitoring in a large spectral range, which is important for advanced SPR measurement including fiber-optic SPR sensing technology.     

The search for new powerful energetic transition metal complexes based on 3,3′-dinitro-5,5′-bis-1,2,4-triazole-1,1′-diolate anion: a DFT study

In this study, employing a new high oxygen balance energetic 3,3′-dinitro-5,5′-bis-1,2,4-triazole-1,1′-diolate anion (DNBTDO) as the bidentate ligand, NH₃ and NH₂NO₂ as short energetic ligands, and Cu/Ni as the metal atoms, two series of novel energetic metal complexes were computationally designed. Their structures and properties were studied by density functional theory, electrostatic potential data, and molecular mechanics methods. The results showed that the designed metal complexes have high detonation performance and acceptable sensitivity: Cu/Ni(DNBTDO)(NH₂NO₂)₂ (A3/B3) have better detonation properties and lower sensitivity than the most powerful CHNO explosive hexanitrohexaazaisowurtzitane, Cu/Ni(DNBTDO)(NH₃)(NH₂NO₂) (A2/B2) have comparable energetic performance and sensitivity with 1,3,5,7-tetranitro-1,3,5,7-tetrazocane, Ni(DNBTDO)(NH₃)₂ (B1) has comparative energy level and sensitivity with 1,3,5-trinitro-1,3,5-triazinane. These five energetic metal complexes may be attractive to energetic materials researchers. Besides, both the energetic ligands and metal atoms could have a great influence on the structures, heats of formation, detonation properties, and stability of energetic metal complexes, and the effects are coupled with each other. This study may be helpful in the search for and development of new improved energetic materials.     

Kinetic analysis of the metal binding mechanism of Escherichia coli manganese superoxide dismutase

The acquisition of a catalytic metal cofactor is an essential step in the maturation of every metalloenzyme, including manganese superoxide dismutase (MnSOD). In this study, we have taken advantage of the quenching of intrinsic protein fluorescence by bound metal ions to continuously monitor the metallation reaction of Escherichia coli MnSOD in vitro, permitting a detailed kinetic characterization of the uptake mechanism. Apo-MnSOD metallation kinetics are "gated", zero order in metal ion for both the native Mn2+ and a nonnative metal ion (Co2+) used as a spectroscopic probe to provide greater sensitivity to metal binding. Cobalt-binding time courses measured over a range of temperatures (35-50 degrees C) reveal two exponential kinetic processes (fast and slow phases) associated with metal binding. The amplitude of the fast phase increases rapidly as the temperature is raised, reflecting the fraction of Apo-MnSOD in an "open" conformation, and its temperature dependence allows thermodynamic parameters to be estimated for the "closed" to "open" conformational transition. The sensitivity of the metallated protein to exogenously added chelator decreases progressively with time, consistent with annealing of an initially formed metalloprotein complex (k anneal = 0.4 min(-1)). A domain-separation mechanism is proposed for metal uptake by apo-MnSOD.     

Cadmium uptake in isolated adrenocortical cells of rainbow trout and yellow perch

Cadmium uptake was studied in isolated adrenocortical cells of rainbow trout (Oncorhynchus mykiss) and yellow perch (Perca flavescens) to test the hypothesis that the greater sensitivity of trout cells to Cd-induced disruption of cortisol secretion observed in previous studies is correlated to higher level of metal accumulation. There was no evidence for interspecies differences in accumulation level, and a specific transport mechanism of similar affinity has been characterized in both fish species. However, inhibition of Cd uptake by calcium was observed in rainbow trout exclusively. The free metal ion Cd(2+) and chlorocomplexes CdCl(n)(2-n) both contribute to Cd accumulation with different level of contribution between fish species. We conclude that interspecies differences in sensitivity to Cd endocrine disrupting effect are not necessarily related to different levels of metal accumulation but would rather be linked to transport pathways and metal speciation. Cadmium/calcium competition for uptake could be a determinant of the early Cd-induced impaired cortisol secretion in trout but not perch cells.     

Sensitive colloidal metal (gold or silver) staining of protein blots on nitrocellulose membranes

A sensitive staining method for protein blots on nitrocellulose membranes is described and compared with commonly used dye staining methods. It uses colloidal metal sols (gold or silver) stabilized with Tween 20 and adjusted to pH 3. It is based on the selective high-affinity binding of colloidal metal particles to the proteins and produces a red-purplish color (gold) or dark grey (silver). The sensitivity of this new staining method is in the same range as silver staining of polyacrylamide gels and matches the sensitivity of overlay assays. It will therefore be a useful tool for correlating the position of bands or spots of proteins detected with overlay assays with the complete electropherogram in a duplicate protein blot.     

Multiple Sclerosis Incidence Associated with the Soil Lead and Arsenic Concentrations in Taiwan

Background

Few studies in the world have assessed the incidence of multiple sclerosis (MS) with soil heavy metal concentrations. We explored the association of soil heavy metal factors and the MS incidence in Taiwan.

Methods

There were 1240 new MS cases from the National Health Insurance Research Database and were verified with serious disabling disease certificates, 1997–2008. Soil heavy metal factors records included arsenic, mercury, cadmium, chromium, copper, nickel, lead and zinc in Taiwan from 1986 to 2002. Spatial regression was used to reveal the association of soil heavy metals and age- and gender-standardized incidence ratios for townships by controlling sunlight exposure hours, smoking prevalence and spatial autocorrelation.

Results

The lead (Pb) concentration in the soil positively correlated with the township incidence; on the other hand, the arsenic (As) concentration in soil negatively correlated with the township incidence and when found together controlled each other. The positive correlation of lead (Pb) predominated in males, whereas the negative correlation of arsenic (As) in soil predominated in females.

Conclusions

We conclude that exposure to lead (Pb) in soil positive associated with incidence of MS in Taiwan, especially in males. Exposure to arsenic (As) in soil negative associated with MS in Taiwan, especially in females.     

Picogram detection of metal ions by melanin-sensitized piezoelectric sensor

A heavy metal ion sensor was constructed by cross-linking melanin onto the gold electrode of quartz crystal microbalance (QCM). A mercury ion sensitivity of 518+/-37 Hz/ppm was observed, a substantial increase in sensitivity compared to previous reports of 10-50 Hz/ppm with the limit of detection at 5 ppb. Detection of other metal ions including Sn(2+), Ge(4+), Li(+), Zn(2+), Cu(2+), Bi(3+), Co(2+), Al(3+), Ni(2+), Ag(+), and Fe(3+) were also performed. Unexpectedly, binding of Mn(7+), Pb(2+), Cd(2+), and Cr(3+) increased resonant frequencies. The surface profile of melanin thin film upon binding to metal ions was investigated by atomic force microscopy (AFM). Structural change of melanin upon binding to metal ions was characterized by circular dichroism and by infrared spectroscopy. The current study provides the first example of melanin-coated piezoelectric sensor showing high sensitivity and selectivity to metal ions.     

Long-Range Surface Plasmon Resonance–Based Sensitivity Study on D-shaped Ag-MgF2-Coated Models with Analyte Variations

In this report, a novel D-shaped long-range surface plasmon resonance (LRSPR) fiber base sensor has been introduced. The demonstration of proposed sensor involves two D-shaped silver-coated models to study the sensitivity responses. The entire study with the constructed models is based on a single-mode fiber. The models are multilayered consisting of metal, dielectric, and analyte as separate layers. Silver (Ag) and magnesium fluoride (MgF2) strips are used as metal and dielectric layers respectively. The constituency of analyte as an interface excellently standardized the models for sensitivity detection. In this report, a large range of analyte refractive indices (RI) which varies from 1.33 to 1.38 is appraised for the proposed models to characterize the sensitivity. The entire context is encompassed by the wavelength region from 450 to 850 nm with an interval of 20 nm. Sensitivities in this report are measured based on the analyte position from the core and metal for both models. For each of the two models, the analyte is placed as the top layer. RIs of the applied metal (Ag) are measured using the Drude-Lorentz formula. The simulated sensitivities for model-1 and model-2 vary from 6.3?×?10³ nm/RIU to 8.7?×?10³ nm/RIU.

     

Synaptotagmin VII is targeted to secretory organelles in PC12 cells, where it functions as a high-affinity calcium sensor

Synaptotagmin (syt) I is thought to act as a Ca2+ sensor that regulates neuronal exocytosis. Fifteen additional isoforms of syt have been identified, but their functions are less well understood. Here, we used PC12 cells to test the idea that different isoforms of syt impart cells with distinct metal (i.e., Ca2+, Ba2+, and Sr2+) requirements for secretion. These cells express syt's I and IX (syt IX sometimes referred to as syt V), which have low apparent metal affinities, at much higher levels than syt VII, which we show has a relatively high apparent affinity for metals. We found that syt I and VII partially colocalize on large dense core vesicles and that upregulation of syt VII produces a concomitant increase in the divalent cation sensitivity of catecholamine release from PC12 cells. Furthermore, RNA interference-mediated knockdown of endogenous syt VII reduced the metal sensitivity of release. These data support the hypothesis that the complement of syt's expressed by a cell, in conjunction with their metal affinity, determines the divalent cation sensitivity of exocytosis.     

Extraordinary Optical Transmission Performances of Nanosandwiched Grating for Wideband Multi-Function Integration

In this paper, we present a peculiar metal-dielectric-metal (MDM) nanosandwich grating structure that can achieve extraordinary optical transmission performances at normal incidence in the ultraviolet-visible-near infrared (UV-VIS-NIR) regions. The proposed structure shows three obvious spectrum characteristics: it can obtain high transmittance up to 80 % in NUV region and efficiently blocking visible wavelengths for transverse-magnetic (TM) polarized incidence; a broadband NIR polarizer can be inspired in the wavelength range from 950 to 1400 nm; more surprisingly, these performances do not deteriorated until 30° tilting angle. Compared to other grating structures with single metal overlayer, it shows wider band-stop characteristics and higher broadband transmission transmittance and extinction ratio (ER) in the investigated wavebands. We analyze the underlying physical mechanism by using numerical simulation, which is primarily attributed to metal ultraviolet transparency, surface plasmon polariton (SPP) at metal/dielectric interface, Fabry–Perot (FP)-like cavity mode within this dielectric grating, and optical magnetic resonance especially in the dielectric interlayer of the MDM sandwiched structure. This structure is very important for developing high-performance subwavelength multifunctional integrated optical devices.     

Localized Surface Plasmon Resonance and Refractive Index Sensitivity of Metal–Dielectric–Metal Multilayered Nanostructures

The localized surface plasmon resonances of multilayered nanostructures are studied using finite difference time domain simulations and plasmon hybridization method. Concentric metal–dielectric–metal (MDM) structure with metal core and nanoshell separated by a thin dielectric layer exhibits a strong coupling between the core and nanoshell plasmon resonance modes. The coupled resonance mode wavelengths show dependence on the dielectric layer thickness and composition of core and outer layer metal. The aluminum-based MDM structures show lower plasmon wavelength compared with Ag- and Au-based MDM nanostructures. The calculated refractive index sensitivity (RIS) factor is in the order Ag–Air–Ag>Au–Air–Au>Al–Air–Al for monometallic multilayered nanostructures. Bimetallic multilayered nanostructures support strong and tunable plasmon resonance wavelengths as well as high RIS factor of 510 nm/refractive index unit (RIU) and 470 nm/RIU for Al–Air–Au and Ag-Air-Au, respectively. The MDM structures not only exhibit higher index sensitivity but also cover a wide ultraviolet–near-infrared wavelengths, making these structures very promising for index sensing, biomolecule sensing, and surface-enhanced Raman spectroscopy.     

Induction of lipid peroxidation during heavy metal stress in Saccharomyces cerevisiae and influence of plasma membrane fatty acid unsaturation.

The degree of plasma membrane fatty acid unsaturation and the copper sensitivity of Saccharomyces cerevisiae are closely correlated. Our objective was to determine whether these effects could be accounted for by differential metal induction of lipid peroxidation. S. cerevisiae S150-2B was enriched with the polyunsaturated fatty acids (PUFAs) linoleate (18:2) and linolenate (18:3) by growth in 18:2- or 18:3-supplemented medium. Potassium efflux and colony count data indicated that sensitivity to both copper (redox active) and cadmium (redox inactive) was increased in 18:2-supplemented cells and particularly in 18:3-supplemented cells. Copper- and cadmium-induced lipid peroxidation was rapid and associated with a decline in plasma membrane lipid order, detected by fluorescence depolarization measurements with the membrane probe trimethylammonium diphenylhexatriene. Levels of thiobarbituric acid-reactive substances (lipid peroxidation products) were up to twofold higher in 18:2-supplemented cells than in unsupplemented cells following metal addition, although this difference was reduced with prolonged incubation up to 3 h. Conjugated-diene levels in metal-exposed cells also increased with both the concentration of copper or cadmium and the degree of cellular fatty acid unsaturation; maximal levels were evident in 18:3-supplemented cells. The results demonstrate heavy metal-induced lipid peroxidation in a microorganism for the first time and indicate that the metal sensitivity of PUFA-enriched S. cerevisiae may be attributable to elevated levels of lipid peroxidation in these cells.     

Modulation of arterial baroreflex control of muscle sympathetic nerve activity by muscle metaboreflex in humans

We aimed to investigate the interaction [with respect to the regulation of muscle sympathetic nerve activity (MSNA) and blood pressure] between the arterial baroreflex and muscle metaboreflex in humans. In 10 healthy subjects who performed a 1-min sustained handgrip exercise at 50% maximal voluntary contraction followed by forearm occlusion, arterial baroreflex control of MSNA (burst incidence and strength and total activity) was evaluated by analyzing the relationship between beat-by-beat spontaneous variations in diastolic arterial blood pressure (DAP) and MSNA both during supine rest (control) and during postexercise muscle ischemia (PEMI). During PEMI (vs. control), 1) the linear relationship between burst incidence and DAP was shifted rightward with no alteration in sensitivity, 2) the linear relationship between burst strength and DAP was shifted rightward and upward with no change in sensitivity, and 3) the linear relationship between total activity and DAP was shifted to a higher blood pressure and its sensitivity was increased. The modification of the control of total activity that occurs in PEMI could be a consequence of alterations in the baroreflex control of both MSNA burst incidence and burst strength. These results suggest that the arterial baroreflex and muscle metaboreflex interact to control both the occurrence and strength of MSNA bursts.     

Polarization-Insensitive Metal–Semiconductor–Metal Nanoplasmonic Structures for Ultrafast Ultraviolet Detectors

We propose a theoretical design principle of polarization-insensitive metal–semiconductor–metal (MSM) structure for ultraviolet photodetectors based on one-dimensional nanogratings. Because the Fabry–Pérot cavity modes supported by a 100-nm-thick ZnO layer with nanostructures for transverse electric and transverse magnetic polarized incidence overlap with each other, a polarization-insensitive absorption enhancement for the ZnO layer at UV wavelengths is achieved, which can be implemented as a nano-interdigitated electrode to address a long-existing limitation between the speed and the responsivity for conventional MSM photodetectors.     

不同桩核修复上颌前牙残根残冠的疗效比较

目的:对比玻璃纤维桩树脂核与铸造金属桩核修复上颌前牙残根残冠的疗效。方法:选取2011年10月至2013年12月在我院口腔科就诊的120例因前牙牙体缺损或者冠折需行桩核冠修复术的患者,随机分为玻璃纤维桩组及铸造金属桩组,每组各60例。玻璃纤维桩组采取玻璃纤维桩核与烤瓷全冠修复术治疗,铸造金属桩组采取钴铬合金铸造桩核与烤瓷全冠修复术治疗。对比2组患者修复治疗的疗效及失败情况。结果:玻璃纤维桩组有1例(1颗)患者因搬迁失访,铸造金属桩组有2例(2颗)患者因金属致敏性导致治疗中断;余117例(179颗)患者中,玻璃纤维桩组共92颗牙,成功率为89.13%,铸造金属桩组共87颗牙,成功率为79.31%,玻璃纤维桩组的明显高于铸造金属桩组;玻璃纤维桩组牙根折裂、桩核松动或脱落的发生率明显低于铸造金属桩组;而桩核折的发生率则明显高于铸造金属桩组,差异有统计学意义(P0.05)。结论:玻璃纤维桩具有美观、抗疲劳、易于操作、患者复诊次数少等优势,且不存在细胞毒性及过敏反应等问题,其修复效果优于铸造金属桩核。