New approach for the detection of non-ribosomal peptide synthetase genes in Bacillus strains by polymerase chain reaction

Bacillus strains produce non-ribosomal lipopeptides that can be grouped into three families: surfactins or lichenysins, iturins and fengycins or plispastatins. These biosurfactants show a broad spectrum of biological activities. To detect strains able to produce these lipopeptides, a new polymerase chain reaction screening approach was developed using degenerated primers based on the intraoperon alignment of adenylation and thiolation nucleic acid domains of all enzymes implicated in the biosynthesis of each lipopeptide family. The comparative bioinformatics analyses of each operon led to the design of four primer pairs for the three families taking into account the differences between open reading frames of each synthetase gene. Tested on different Bacillus sp. strains, this technique was used successfully to detect not only the expected genes in the lipopeptide producing strains but also the presence of a plispastatin gene in Bacillus subtilis ATCC 21332 and a gene showing a high similarity with the polyketide synthase type I gene in the B. subtilis ATCC 6633 genome. It also led to the discovery of the presence of non-ribosomal peptide synthetase genes in Bacillus thuringiensis serovar berliner 1915 and in Bacillus cereus LMG 2098. In addition, this work highlighted the differences between the fengycin and plipastatin operon at DNA level.     

Identification of Rhodococcus equi using the polymerase chain reaction

K.S. BELL, J.C. PHILP, N. CHRISTOFI AND D.W.J. AW. 1996. Two regions in the gene coding for 16S rRNA in Rhodococcus equi were selected as species-specific primer sequences for the polymerase chain reaction (PCR). PCR using these primers was tested against 10 strains of R. equi (including the type strain) and gave positive results for all but was negative for all other tested species of Rhodococcus ; representatives of the most closely related genera and a number of other bacterial species. This method could therefore be used to identify this species which can infect the lungs or other organs of horses, pigs, humans and other animals.     

Amplification of the phage lambda DNA sequence by polymerase chain reaction using thermostable DNA polymerase]

The efficiency of phage DNA amplification by the method of polymerase chain reaction (PCR) with Tth DNA-polymerase was studied for optimization of PCR conditions. The effect on amplification efficiency of medium ionic strength and pH, the presence of univalent cations, detergents, gelatin, ATP, pyrophosphate, SH-reagents and ratio of concentrations of Mg and dNTPs, primers and template was studied. It has been found that a pH optimum for PCR with Tth DNA-polymerase varies from 8.5 to 9.0. An ionic strength optimum for PCR is about 0.08. The influence of univalent cations on the activity of Tth DNA-polymerase can be expressed as NH4+ greater than Na+ greater than K+. 0.01% Tween-20 significantly increases the efficiency of PCR and 0.01% gelatin inhibits it. Addition of ATP, pyrophosphate, SH-reagents to the reaction mixture did not increase the yield of PCR product. It has been also shown that for the given PCR-system an optimum Mg/dNTPs molar ratio is within the range of 1.5-2.0. An optimum concentration of each of the pair of primers for this PCR-system is about 0.3 microM. The possibility of PCR-amplification of 500-8500 b.p. DNA fragments has been demonstrated.     

Rapid cloning of rearranged immunoglobulin heavy chain genes from human B-cell lines using anchored polymerase chain reaction.

A general method to obtain the variable region DNA sequence of the immunoglobulin heavy chain using anchored polymerase chain reaction is described. Based on this DNA sequence, clone-specific oligonucleotides were designed to anneal to the complementarity determining regions. These were used to identify the original B-cell clone in serial dilutions of polyclonal lymph node DNA with high specificity and sensitivity. This method should be useful for studying minimal residual disease in B-cell neoplasia.     

Identification of the agents of coccidioidomycosis using polymerase chain reaction

Two pairs of primers for diagnosis of coccidioidomycosis using the method of PCR were constructed. One pair was used for identification of the two species of Coccidioides (C. immitis and C. posadasil) on the basis of MBP-1 gene. The other pair was chosen on the basis of SOWgp82 gene, which encodes an immunodominant, spherule outer wall glycoprotein for detecting only C. posadasii. The used primers allowed the agents of coccidioidomycosis to be detected using PCR with high sensitivity and specificity. The effective method of isolation of fungus DNA from soil contaminated with arthroconidia of Coccidioides spp. was developed. It includes guanidinthiocyanate-phenol-chloroform deproteinization followed by DNA purification using nuclear sorption.     

Rapid cloning of rearranged immunoglobulin genes from human hybridoma cells using mixed primers and the polymerase chain reaction

A general method to directly obtain the DNA sequence of the variable regions of any immunoglobulin chain using a mixture of oligomer primers and the polymerase chain reaction (PCR) is described. Mixed oligonucleotide primers corresponding to the 5' signal peptide and a conserved 3' constant region primer were used for enzymatic amplification of each of the heavy and light chain variable regions of a human hybridoma producing a monoclonal antibody recognizing an epitope of gp120 of the human immunodeficiency virus 1. The amplified DNA segments were cloned and the sequence was determined for the heavy chain variable region. This method will greatly facilitate structural and functional studies of immunoglobulins by reducing the effort to clone and sequence the members of the immunoglobulin as well as other multigene families.     

Expression cloning of a sheep adreno-ferredoxin using the polymerase chain reaction.

In addition to the selective amplification of cDNA from total RNA by the PCR method, the distinctive properties of ferredoxin-expressing colonies can be used for cloning a ferredoxin cDNA. This strategy for cloning and expressing cDNA in E. coli was applied to a sheep adreno-ferredoxin. The expressed sheep ferredoxin showed a spectral pattern typical of [2Fe-2S] proteins. The amino acid sequence deduced from the DNA sequence showed that the mature form of sheep ferredoxin consists of 128 amino acid residues. This rapid and simple method for cloning and expressing cDNA can be applied to other ferredoxins.     

Molecular cloning of human cardiac troponin I using polymerase chain reaction

We have used the polymerase chain reaction (PCR) to synthesise a cDNA encoding part of human cardiac troponin I. Amplification was achieved using fully degenerate sets of oligonucleotides corresponding to conserved regions of amino acid sequence identified in other troponin I isoforms. The cloned PCR fragment was subsequently used to isolate full-length cDNAs from a cardiac cDNA library. We describe the approach, as a general cloning strategy starting from limited amino-acid sequence data and report the cloning, and complete amino acid sequence of human cardiac troponin I. Analysis of human development using these clones demonstrates early expression of this gene in the heart.     

Construction of mutant and chimeric genes using the polymerase chain reaction.

In the polymerase chain reaction (PCR) the specific amplification of a small segment of DNA within a complex DNA sample is effected by repeated cycles of DNA denaturation and enzymatic synthesis primed by two oligonucleotides complementary to regions within opposite strands of the DNA. In this report a simple and efficient method is described in which PCR methodology is used to introduce specific mutations into a double stranded DNA molecule. In this procedure a supercoiled plasmid DNA serves as template for a PCR in which a primer bearing the mutated sequence is incorporated into the amplified product. The presence of convenient restriction sites in the mutagenic primer and in the amplified DNA permit direct replacement of a wild type DNA segment with the mutated segment by treating the PCR mixture with the appropriate restriction endonucleases followed by DNA ligase. Using this procedure, a single amino acid replacement, a 16 amino acid deletion and a replacement of four amino acids with a twelve amino acid segment from another membrane protein were introduced into the amino terminal signal segment of rat hepatic cytochrome P450b (P450IIB1).     

Universal CG cloning of polymerase chain reaction products

Single-insert cloning of DNA fragments without restriction enzymes has traditionally been achieved using TA cloning, with annealing of a polymerase chain reaction (PCR) fragment containing a single overhanging 3′ A to a plasmid vector containing a 3′ T. In this article, we show that the analogous “CG cloning” is faster and far more efficient, using AhdI to generate a C-vector. For an afternoon ligation, CG cloning achieved double the cloning efficiency and more than 4-fold the number of transformants compared with TA cloning. However, blunt-end ligation was markedly more efficient than both. CG cloning could prove to be extremely useful for single-copy high-throughput cloning.     

Identification of Brucella spp. by using the polymerase chain reaction.

The application of two synthetic oligonucleotides as probes and as primers in the polymerase chain reaction is presented for a specific, sensitive, and quick identification of Brucella spp. The specific oligonucleotide sequences were chosen on the basis of a 16S rRNA sequence alignment between Brucella abortus and Agrobacterium tumefaciens.     

Identification of Brucella spp. by using the polymerase chain reaction.

The application of two synthetic oligonucleotides as probes and as primers in the polymerase chain reaction is presented for a specific, sensitive, and quick identification of Brucella spp. The specific oligonucleotide sequences were chosen on the basis of a 16S rRNA sequence alignment between Brucella abortus and Agrobacterium tumefaciens.     

Identification of the anginosus group within the genus Streptococcus using polymerase chain reaction

The aim of this study was to establish an identification method for the anginosus group within the genus Streptococcus by polymerase chain reaction (PCR). Using a primer pair based on the group-specific sequences of penicillin-binding protein 2B (pbp2b) gene, a 275-bp fragment was amplified from each species in the group but no size-matched products were obtained in other streptococci. Further identification in the species or subspecies level was possible by a multiplex PCR with primers for the 16S ribosomal RNA gene of Streptococcus anginosus, the hyaluronate lyase genes both of Streptococcus intermedius and Streptococcus constellatus subsp. constellatus, and the intermedilysin (ily) gene of S. intermedius. In the case ofStreptococcus constellatus subsp. pharyngis, the amplified fragment from the S. intermedius-type hyaluronate lyase gene was obtained, while that from the ily gene was not. These results also indicate that two different hyaluronate lyase genes are distributed among the anginosus group.     

The discovery of new intron-containing human tRNA genes using the polymerase chain reaction

Introns in transfer RNA genes are rare in vertebrates. Until now, the only intron-containing human tRNA genes were believed to be those coding for tRNA(Tyr). All of these introns are inserted 3' to the anticodon position in these genes. We have designed polymerase chain reaction primers that can amplify all of the tRNA(Tyr) genes for cloning and sequencing by using the conserved portions of the gene coding for the structural part of the tRNA. Our preliminary results have revealed five tRNA(Tyr) genes, each of which contains a different intron. We used the same technique to amplify, clone, and sequence the human genes for tRNA(Leu)CAA. This has resulted in the discovery that this human tRNA gene family also has introns inserted 3' to the anticodon. This polymerase chain reaction technique is useful in detecting new families of intron-containing tRNA genes as well as identifying sequence variations in the introns of individual genes.     

Facile cloning and sequencing of S-crystallin genes from octopus lenses based on polymerase chain reaction.

S-crystallin is a major lens protein present in the octopus and squid of Cephalopods. To facilitate the cloning of the protein, cDNA was constructed from the poly(A)+RNA of octopus lenses, and amplification by polymerase chain reaction (PCR) was carried out with two primers designed according to the 5'- and 3'-coding regions of S-crystallin gene. Sequencing two of 15 positive clones obtained shows 37-44% similarity in nucleotide and 23-30% similarity in amino acid sequences as compared with mammalian glutathione S-transferases (GST), revealing that S-crystallins exist as a multigene family and probably derived from GST by gene duplication and subsequent mutational base replacements.     

A general method for cloning recA genes of gram-positive bacteria by polymerase chain reaction.

An internal fragment of the recA gene from eight gram-positive organisms has been amplified by using degenerate primers in a polymerase chain reaction. The internal 348- or 360-bp recA DNA segments from Bacillus subtilis, Clostridium acetobutylicum, Lactobacillus bulgaricus, Lactobacillus helveticus, Leuconostoc mesanteroides, Listeria monocytogenes, Staphylococcus aureus, and Streptococcus salivarus subsp. thermophilus were amplified, cloned, and sequenced. The G + C contents of the DNA from these species range from 28 to 52%. The sequences of the bacterial recA genes show strong relatedness. This method is particularly useful for the recovery of the recA genes of gram-positive bacteria and avoids the difficulties of using a genetic complementation test for cloning.     

Sex determination using the polymerase chain reaction

A practical class experiment on the PCR is described which has been used over several years as part of an undergraduate biochemistry and molecular biology course for science students. A major aim is to provide experience in the use of the polymerase chain reaction (PCR) and its interpretation. Students are given small coded DNA samples and use the PCR reaction to determine whether the sample is from a male or a female.