Ion etching of bacteriophage lambda: evidence that the right end of the DNA is located at the outside of the phage DNA mass.

Bacteriophage lambda was etched in an Ar+ plasma under conditions in which the capsid and some of the DNA were eroded (by sputtering) from the particle surface. Analysis of the DNA remaining in etched phage demonstrated an enrichment in sequences derived from the left end and middle of the genome; sequences from the right end were selectively lost. The results suggest that the DNA in the mature phage is arranged with its left end toward the center and its right end toward the exterior of the overall DNA mass. Since the left end is the first to enter the phage prohead, the results are most compatible with the view that prohead filling also proceeds from the center to the exterior of the cavity. The suggested arrangement of lambda DNA is comparable to that observed in phage T4 and is consistent with the spiral-fold model of packaged DNA.     

Tests of spool models for DNA packaging in phage lambda

Experiments are reported which bear on two spool models proposed for packaging the DNA of phage lambda. Both spool models fill an assumed spherical cavity with DNA wrapped in cylindrical or quasi-cylindrical layers composed of adjacent circular turns. In the curved-spool model, a single continuous segment of DNA, about 20% of the DNA length and probably located near the left end of the DNA, is in contact with the coat protein of the phage capsid. In the straight spool model, there are several DNA segments in contact with the capsid; they are concentrated in one half (probably the left half) of lambda DNA. We have identified the loci on the DNA which are in contact with the capsid by chemical crosslinking, induced by ultraviolet-irradiation of phage containing 5-bromodeoxyuridine in place of thymine.In an electron microscope experiment, phage are first lysed with EDTA, and then spread in a cytochrome c film by the formamide method. The disrupted capsid, which has the appearance of a phage ghost, serves as a marker showing where the DNA is crosslinked to the coat. The left end of the DNA is not distinguished from the right end, and so the map of DNA-capsid contacts is folded over on itself. Contacts are found nearly randomly over the entire map.In a second experiment, DNA from lysed, crosslinked phage is cut either with EcoRI or HindIII restriction endonucleases and the cut restriction fragments are labeled at their ends with ³²P. Density centrifugation in a CsCl gradient separates free DNA from restriction fragments crosslinked to protein. After digestion with proteinase k, the DNA fragments previously crosslinked to protein are identified by size after agarose gel electrophoresis. DNA fragments from all parts of the genome are found.These two experiments show that, if the DNA of each phage is packaged identically, then the curved-spool model is ruled out and the straight spool model is unlikely. Alternatively, the manner of packaging the DNA may vary from one phage to the next. These results agree with other recent experiments on λ DNA packaging by Hall & Schellman (1982a,b), and by Haas et al. (1982).A different experiment is also reported. The psoralen derivative aminomethyltrioxalen (AMT) is allowed to intercalate into λ phage and then the DNA strands are crosslinked by ultraviolet-irradiation after the rapid phase of AMT intercalation is complete. The DNA is subsequently denatured by glyoxal modification and spread for electron microscopy in a cytochrome c film by the formamide method. Sites of AMT crosslinking appear duplex; uncrosslinked regions appear as single-stranded loops. AMT is found to intercalate throughout the λ DNA. Patterns of reacted sites appear different from one DNA molecule to the next, and no consistent pattern can be found. More extensive intercalation occurs with the deletion mutant λb221 than with phage of wild-type DNA length, and free DNA shows much more reaction than the DNA inside either phage type. In order for intercalation to occur, the DNA helix must unwind and become further extended. This experiment shows that regions throughout the entire DNA molecule can unwind and be extended by intercalation, which is not confined to a single DNA segment or to segments in one half of the DNA molecule, as would be expected for the two spool models if only the DNA in contact with the capsid were accessible to the dye.     

Identification of sequences necessary for packaging DNA into lambda phage heads

Several species of DNA molecules are packaged into lambda phage heads if they carry the region around the cohesive end site of lambda phage (cos lambda). The minimal functional sequence around cos lambda needed for packaging was examined by cloning in pBR322. The results showed that the minimal region contained 85 bp around cos lambda; 45 bp of the left arm of lambda phage and 40 bp of the right arm. A 75-bp region located to the right of the minimal region seems to enhance packaging. A 223-bp fragment containing these regions can be used as a portable element for plasmid DNA packaging into lambda phage heads. Plasmid ppBest 322, a derivative of pBR322 carrying this portable packager and both amp and tet genes, was constructed. This plasmid is useful for cloning of large DNA fragments.     

A lambda library of Herpes simplex virus type 1 (KOS) DNA fragments obtained by partial digestion with Sau3A

Large fragments of Herpes simplex virus type 1 (HSV-1, strain KOS) DNA were produced by partial cleavage with Sau3A and inserted into a phage lambda BamHI vector. Recombinant phage (lambda KOS) DNA molecules were isolated and characterised. The final collection of phage recombinants contains partially overlapping inserts, which represent most of the HSV-1 genome. Restriction enzyme analysis of many independent clones containing Us sequences revealed sequence polymorphism in two specific regions.     

Formation of oligomeric structures from plasmid DNA carrying cos lambda that is packaged into bacteriophage lambda heads.

Plasmids that carry cos lambda, the region necessary for lambda phage packaging and that are as small as four kilobases in size can be packaged into lambda phage heads in head-to-tail tandem oligomeric structures. Multimeric oligomers as large as undecamers have been detected. Oligomer formation depends upon the products of red and gam of lambda, and the general recombination occurs between different plasmids that share homologous DNA regions. The packaging efficiency of plasmids depends on its copy number in cells and its genome size. Upon injection into a cell, the DNA establishes itself as a plasmid in a tandem structure. When such a plasmid in a high oligomeric structure is used as the source of packaging DNA, the packaging efficiency of the plasmids is elevated. The oligomers are stable in recA cells, whereas they drift toward lower oligomers in recA+ cells.     

Distribution of 5-methylcytosine in phage lambda genome methylated by DNA methylase Eco RII

The distribution of 5-methylcytosine in Eco RI-Bam HI fragments of phage lambda DNA in vitro methylated by Eco RII methylase has been studied. The general picture of distribution of methylated sites in phage lambda DNA is slightly different from the statistical distribution. However, the sites have been found, where the distribution of 5-methylcytosine is not accidental. A complete absence of 5-methylcytosine in the J-fragment, a genome lambda area essential for site-specific recombination, has been found. The absence of Eco RII is supposed to be the best protection of this area of phage genome from the increased mutagenesis, characteristic for nucleotide sequences methylated by DNA-methylated Eco RII and Eco RII type.     

A phage T4 in vitro packaging system for cloning long DNA molecules.

Recombinant plasmid DNAs containing long DNA inserts that can be propagated in Escherichia coli would be useful in the analysis of complex genomes. We tested a bacteriophage T4 in vitro DNA packaging system that has the capacity to package about 170 kb of DNA into its capsid for cloning long DNA fragments. We first asked whether the T4 in vitro system can package foreign DNA such as concatemerized lambda imm434 DNA and phage P1-pBR322 hybrid DNA. The data suggest that the T4 system can package foreign DNA as efficiently as the mature phage T4 DNA. We then tested the system for its ability to clone foreign DNA fragments using the P1-pBR322 hybrid vectors constructed by Sternberg [Proc. Natl. Acad. Sci. USA 87 (1990) 103-107]. E. coli genomic DNA fragments were ligated with the P1 vectors containing two directly oriented loxP sites, and the ligated DNA was packaged by the T4 in vitro system. The packaged DNA was then transduced into E. coli expressing the phage P1 cyclization recombination protein recombinase to circularize the DNA by recombination between the loxP sites situated at the ends of the transduced DNA molecule. Clones with long DNA inserts were obtained by using this approach, and these were maintained as single-copy plasmids under the control of the P1 plasmid replicon. Clones with up to about 122-kb size inserts were recovered using this approach.     

Primary structure of an EcoRI fragment of lambda imm434 DNA containing regions cI-cro of phage 434 and cII-o of phage lambda.

Digestion of phage lambda imm434 DNA with restriction endonuclease EcoRI yields 7 fragments. The shortest among them (1287 bp) contains the right part of the phage 434 immunity region and the phage DNA portion proximal to it. The complete primary structure of this fragment has been determined using the chemical method of DNA sequencing. Hypothetical amino-acid sequences of proteins coded by the cro gene of phage 434 and the cII gene of phage lambda, as well as NH2-terminal amino-acid sequences of the cI protein of phage 434 and the O protein of phage lambda, have been deduced solely on the basis of the DNA sequence. The fragment studied contains also the pR and probably prm promoters and the oR operator of phage 434. The sequence coding for them differs from the respective DNA sequence of phage lambda.     

A model of lambda DNA arrangement in the viral particle

The icosahedral shape of the lambda head suggests a 12-subunit structure of the collapsed DNA inside. The internal space of an icosahedron can optimally be filled by 12 geometrical figures each of which is a combination of a cone and more than half of a sphere. Such a pear-like geometrical figure is, in fact, formed spontaneously by DNA collapsed under certain conditions in vitro (Eickbush & Moudrianakis, 1978). It is proposed that a pear-like structure formed by about 4000 bp is the fundamental structural subunit of packaged lambda DNA. A possible arrangement of the 12 subunits inside the phage head relative to the tail is discussed. We hypothesize that lambda DNA is packaged into proheads in its condensed form. A driving force promoting the DNA translocation could be an ATP-dependent activity of a DNA topoisomerase (gpA/gpNu1), which would induce further reduction in the linking number of the already strongly negatively supercoiled DNA by rotation of one DNA strand around the other. The additional strain accumulated at the end of DNA molecule bound by the topoisomerase beyond a critical value would lead to regional collapse of the viral genome into a pear-like structure.     

The isolation of structural genes from libraries of eucaryotic DNA

We present a procedure for eucaryotic structural gene isolation which involves the construction and screening of cloned libraries of genomic DNA. Large random DNA fragments are joined to phage lambda vectors by using synthetic DNA linkers. The recombinant molecules are packaged into viable phage particles in vitro and amplified to establish a permanent library. We isolated structural genes together with their associated sequences from three libraries constructed from Drosophila, silkmoth and rabbit genomic DNA. In particular, we obtained a large number of phage recombinants bearing the chorion gene sequence from the silkmoth library and several independent clones of β-globin genes from the rabbit library. Restriction mapping and hybridization studies reveal the presence of closely linked β-globin genes.     

In vivo DNA cloning with a mini-Mu replicon cosmid and a helper lambda phage

A mini-Mu bacteriophage, containing the cohesive-end packaging site (cos) from a lambda-phi 80 hybrid phage, a high-copy-number plasmid replicon, and a kanamycin-resistance gene for independent selection, was constructed to clone genes in vivo. This mini-Mu element can be derepressed to transpose at a high frequency. DNA segments that become flanked by copies of this mini-Mu element in the same orientation can be packaged by a helper lambda phage. The resulting lambda lysate can be used to infect recipient cells where the injected DNA can circularize by annealing at the cos termini. Drug-resistant transductants obtained carry the mini-Mu-replicon cosmid element with inserts of different nucleotide sequences. These are analogous to recombinant DNA clones generated in vitro with restriction endonuclease cutting and ligase joining reactions replaced by the Mu transposition process. Clones of particular genes were isolated by their ability to complement specific mutations. Both recA+ and recA- recipient cells can be used with equal efficiency. Clones obtained with a helper lambda phage require the presence of the cos site in the mini-Mu replicon. They carry larger inserts than those isolated with the same mini-Mu element and Mu as a helper phage. The mini-Mu replicon-cosmid bacteriophage contains a lac-gene fusing segment for isolating fusions of lac operon DNA to gene control regions in the cloned sequences. Independent clones of a particular gene can be used to prepare a restriction map of the gene and its flanking regions.     

霍乱弧菌分型噬菌体VP3基因组序列的测定与分析

测定和分析霍乱弧菌分型噬菌体VP3基因组序列,并为ElTor型霍乱弧菌两类菌株的分型方法原理提供研究基础。鸟枪法构建VP3噬菌体全基因组随机文库;测序拼接成最小重叠群,引物步移法填补缝隙序列,拼接后获得VP3全基因组序列。PCR随机扩增噬菌体DNA片段并酶切鉴定;预测可能存在的开放读码框(ORF);对VP3和相关噬菌体的DNA聚合酶基因作进化树分析,协助判定VP3的分类;对预测的部分启动子区利用报道基因进行活性分析。VP3全基因组为环状双链DNA,长度39504bp;酶切鉴定结果与序列一致。确定了49个ORF,注释了27个ORF的编码产物,其中有20个基因产物与T7样噬菌体同源,包括RNA聚合酶(RNAP)、参与DNA复制的蛋白、衣壳蛋白、尾管及尾丝蛋白、DNA包装蛋白等。DNA聚合酶(DNAP)进化树分析表明VP3与T7样噬菌体有同源性。将预测的10个启动子序列克隆到lacZ融合质粒pRS1274上,经检测均具有启动子活性。测定和分析VP3的基因组序列,基因组结构与进化树分析提示VP3属于T7噬菌体家族。     

Insertion of the cos-site into DNA of phage M13 and its packing in proteins of phage lambda

The cos-site of lambda phage from pHC79 cosmide is transferred to DNA from M13 mp18 phage. The recombinant DNA thus obtained (MC18) is efficiently packaged into lambda proteins in vitro. The BamHI-HindIII fragment of pGP588 (a pBR322 derivatives containing fragment of human DNA) is subcloned into MC18. Although this pGP588 fragment contains numerous Alu repeats, no essential rearrangements of the insert were revealed. The efficiency infection by recombinant DNA packaged with lambda proteins is about 1 X 10(5) pfu/microgram DNA, whereas in the similar conditions the efficiency of lambda EMBL3A was 1 X 10(6) pfu/microgram. It is assumed that the MC vectors might be suitable for cloning and sequencing large fragments either with cohesive or blunt ends. It opens also the way to construct genomic libraries in single-stranded phages.     

RNA-primed initiation sites of DNA replication in the origin region of bacteriophage lambda genome.

Using DNA molecules synthesized in the early stage of lambda phage infection, deoxynucleotides at the transition sites from primer RNA to DNA synthesis have been mapped in the 1.5 kbase area of the lambda phage genome containing the genetically defined replication origin (ori lambda). Sites in the 1-strand (the polarity of the 1-strand is 5' to 3' from the left to the right direction of the lambda phage genetic map) were distributed both inside and outside of the ori lambda, whereas the sites in the r-strand (the strand in the opposite polarity) were mainly distributed more than three hundred nucleotides apart from the ori lambda to the right. A CPuPu sequence was found at -12 to -10 region of transition sites of the r- and the 1-strands in the frequency of 80% and 70%, respectively, and over 60% of the CPuPu sequences were CAG. Properties of the transition sites are discussed in relation to the primer synthesis.     

霍乱弧菌噬菌体VP2基因组序列的测定与分析

测定并分析了霍乱弧菌噬菌体VP2基因组序列,为VP2生物学特性和功能研究提供分子遗传学基础。为此构建了VP2DNA随机文库,鸟枪法(shot-gun)测定其全基因组序列。测序结果用软件Phrad-Prap拼接成最小重叠群(contig),引物步移法测定contigs问的缝隙(gap)序列,拼接后获得VP2全基因组序列。利用生物信息学技术分析’VP2基因组,最后对VP2和相关噬菌体做DNA聚合酶(DNA pol)基因的进化树分析。结果：VP2属短尾噬菌体科,基因组全长39853bp,为环状双链DNA,G C含量为50．56％,较高于霍乱弧菌测序菌株N16961基因组G C含量;VP2的基因组有碱基使用偏性;预测和注释了45个开放读码框(ORF),分析了DNA复制基因、衣壳蛋白和DNA包装基因、侵染相关基因。DNA pol进化树比较结果,VP2与链球菌噬菌体Cp-1和芽孢杆菌噬菌体GA-1分为一群。根据对VP2基因组序列的测定和分析预测了VP2的ORF,并分析了其中的功能基因,推测VP2在进化关系上属于噬菌体phi29样噬菌体。     

Molecular cloning of bovine leukemia virus DNA integrated into the bovine tumor cell genome

The bovine leukemia virus (BLV) DNA harbored in the bovine tumor cell genome was cloned in lambda Charon 4A phage. Using either representative or 3' half-enriched BLV cDNA as a blot hybridization probe, clone lambda BLV-1 was shown to carry 9 kb of the BLV genome, flanked by cellular sequences at both ends. Restriction mapping with twelve endonucleases and hybridization of the DNA fragments to BLV cDNA representing a 3'-end portion of the viral genome revealed the presence and precise location of two long terminal repeats (LTRs) and virus-cell junctions. Thus, lambda BLV-1 appears to contain the complete BLV genome and flanking tumor cellular sequences. The restriction map of the cloned BLV proviral DNA closely resembles that previously reported for unintegrated linear proviral DNA, but differs significantly from that of the integrated provirus of another BLV isolate, the difference occurring preferentially in the putative gag and pol genes.     

Transforming DNA sequences in rat cells transformed by DNA fragments of highly oncogenic human adenovirus type 12.

Rat cell lines tranformed by viral DNA fragments, EcoRI-C and HindIII-G, of adenovirus type 12 DNA were analyzed for the viral transforming DNA sequences present in cell DNAs. Cell lines transformed by the EcoRI-C fragment of adenovirus type 12 DNA (leftmost 16.5% of the viral genome) contain most of the HindIII-G sequences of the HindIII-G fragment, but at a different frequency depending on the portions of the fragment. The sequence of the AccI-H fragment of adenovirus type 12 DNA (the left part of the HindIII-G; leftmost 4.5% of the viral genome) was detected dominantly in cells transformed by the HindIII-G fragment Southern blot analysis showed that viral DNA sequences are present at multiple integration sites in high-molecular-weight cell DNA from cells transformed by the EcoRI-C or HindIII-G fragment of adenovirus type 12 DNA. These results suggest that most of the HindIII-G sequences in cells transformed by the HindIII-G fragment are present as fragmented forms.     

A plasmid cloning system utilizing replication and packaging functions of the filamentous bacteriophage fd

DNA cloning vectors were developed which utilize the replication origin (ori) of bacteriophage fd for their propagation. These vectors depend on the expression of viral gene 2 that was inserted into phage lambda, which in turn was integrated into the host genome. The constitutive expression of gene 2 in the host cells is sufficient for the propagation of at least 100 pfd plasmids per cell. In addition to the fd ori, the pfd vectors carry various antibiotic-resistance genes and unique restriction sites. Some of these vectors have no homologies to commonly used pBR plasmids or to lambda DNA. The nucleotide sequence of the vectors can be deduced from published sequences. Large DNA inserts can be stably propagated in pfd vectors; these are more stable than similar DNA fragments cloned in intact genomes of filamentous bacteriophage. Inclusion of phage sequences required for efficient phage packaging and infection with a helper phage resulted in formation of phage particles containing single-stranded plasmid genomes. Growth at 42 degrees C without selective pressure results in loss of pfd plasmids.     

Direct transfer of coliphage lambda DNA from Escherichia coli to cellular slime mold Dictyostelium discoideum

Dictyostelium discoideum myxamoebae were cultured with Escherichia coli cells infected with lambda phage in the presence of chloramphenicol. After eliminating the uningested bacteria by repeated centrifugation in a Percoll gradient, we examined the myxamoeba cytoplasm (not the food vacuole) for the presence of phage DNA. A significant amount of DNA extracted from the myxamoebae was hybridizable with purified phage lambda DNA, and capable of forming phage particles when packaged in vitro with phage lambda proteins. The EcoRI restriction maps of the phages recovered from the plaques were identical to that of the infecting phage. These results strongly suggest that phage DNA molecules were taken up by the cellular slime mold cells and that at least some fraction existed in intact form.     

The identification of the bacteriophage HP1c1 and S2 integration sites in Haemophilus influenzae Rd by field-inversion gel electrophoresis of large DNA fragments.

The resolution of high molecular weight DNA fragments by field-inversion gel electrophoresis (FIGE) demonstrate the presence of two phage (S2 and HP1c1) integration sites (attB) in the Haemophilus influenzae Rd chromosome. In a population of wild-type cells either prophage site appears to be occupied in a single cell by one to at least three, tandemly repeated, amplified phage DNA molecules. The attL of the second bacterial attachment site present in the host SmaI fragment 7 and the leftmost part of phage S2 type B DNA of its genome organization (Piekarowicz et. al., 1986) have been sequenced. A comparison of the two bacterial att sites demonstrated that their homology is limited to the core region. A comparison of the DNA sequences of phage S2 type B and HP1c1 type C revealed a 530-bp insertion in the HP1c1 type C (not present in S2 type B) in addition to DNA variants due mostly to single-base mismatches. We postulate that phage S2 and HP1c1 genome variants (A, B, and C) evolved from a single phage origin and might stem from passage history arisen through accumulation of mutations.