Production of lactic acid using a new homofermentative Enterococcus faecalis isolate

Lactic acid is an intermediate-volume specialty chemical for a wide range of food and industrial applications such as pharmaceuticals, cosmetics and chemical syntheses. Although lactic acid production has been well documented, improved production parameters that lead to reduced production costs are always of interest in industrial developments. In this study, we describe the production of lactic acid at high concentration, yield and volumetric productivity utilizing a novel homofermentative, facultative anaerobe Enterococcus faecalis CBRD01. The highest concentration of 182 g lactic acid l⁻¹ was achieved after 38 h of fed-batch fermentation on glucose. The bacterial isolate utilized only 2–13% of carbon for its growth and energy metabolism, while 87–98% of carbon was converted to lactic acid at an overall volumetric productivity of 5 g l⁻¹ h⁻¹. At 13 h of fermentation, the volumetric productivity of lactate production reached 10.3 g l⁻¹ h⁻¹, which is the highest ever reported for microbial production of lactic acid. The lactic acid produced was of high purity as formation of other metabolites was less than 0.1%. The present investigation demonstrates a new opportunity for enhanced production of lactic acid with potential for reduced purification costs.     

Development of bioelectrocatalytic activity stimulates mixed‐culture reduction of glycerol in a bioelectrochemical system

In a microbial bioelectrochemical system (BES), organic substrate such as glycerol can be reductively converted to 1,3-propanediol (1,3-PDO) by a mixed population biofilm growing on the cathode. Here, we show that 1,3-PDO yields positively correlated to the electrons supplied, increasing from 0.27 ± 0.13 to 0.57 ± 0.09 mol PDO mol⁻¹ glycerol when the cathodic current switched from 1 A m⁻² to 10 A m⁻². Electrochemical measurements with linear sweep voltammetry (LSV) demonstrated that the biofilm was bioelectrocatalytically active and that the cathodic current was greatly enhanced only in the presence of both biofilm and glycerol, with an onset potential of −0.46 V. This indicates that glycerol or its degradation products effectively served as cathodic electron acceptor. During long-term operation (> 150 days), however, the yield decreased gradually to 0.13 ± 0.02 mol PDO mol⁻¹ glycerol, and the current–product correlation disappeared. The onset potentials for cathodic current decreased to −0.58 V in the LSV tests at this stage, irrespective of the presence or absence of glycerol, with electrons from the cathode almost exclusively used for hydrogen evolution (accounted for 99.9% and 89.5% of the electrons transferred at glycerol and glycerol-free conditions respectively). Community analysis evidenced a decreasing relative abundance of Citrobacter in the biofilm, indicating a community succession leading to cathode independent processes relative to the glycerol. It is thus shown here that in processes where substrate conversion can occur independently of the electrode, electroactive microorganisms can be outcompeted and effectively disconnected from the substrate.     

Predicting translational diffusion of evolutionary conserved RNA structures by the nucleotide number

Ribonucleic acids are highly conserved essential parts of cellular life. RNA function is determined to a large extent by its hydrodynamic behaviour. The presented study proposes a strategy to predict the hydrodynamic behaviour of RNA single strands on the basis of the polymer size. By atom-level shell-modelling of high-resolution structures, hydrodynamic radius and diffusion coefficient of evolutionary conserved RNA single strands (ssRNA) were calculated. The diffusion coefficients D of 17–174 nucleotides (nt) containing ssRNA depended on the number of nucleotides N with D = 4.56 × 10⁻¹⁰ N^−0.39 m² s⁻¹. The hydrodynamic radius R_H depended on N with R_H = 5.00 × 10⁻¹⁰ N^0.38 m. An average ratio of the radius of gyration and the hydrodynamic radius of 0.98 ± 0.08 was calculated in solution. The empirical law was tested by in solution measured hydrodynamic radii and radii of gyration and was found to be highly consistent with experimental data of evolutionary conserved ssRNA. Furthermore, the hydrodynamic behaviour of several evolutionary unevolved ribonucleic acids could be predicted. Based on atom-level shell-modelling of high-resolution structures and experimental hydrodynamic data, empirical models are proposed, which enable to predict the translational diffusion coefficient and molecular size of short RNA single strands solely on the basis of the polymer size.     

In vitro propagation of female Ephedra foliata Boiss. & Kotschy ex Boiss.: an endemic and threatened Gymnosperm of the Thar Desert

Ephedra foliata Boiss. & Kotschy ex Boiss., (family – Ephedraceae), is an ecologically and economically important threatened Gymnosperm of the Indian Thar Desert. A method for micropropagation of E. foliata using nodal explant of mature female plant has been developed. Maximum bud-break (90 %) of the explant was obtained on MS medium supplemented with 1.5 mg l⁻¹ of benzyl adenine (BA) + additives. Explant produces 5.3 ± 0.40 shoots from single node with 3.25 ± 0.29 cm length. The multiplication of shoots in culture was affected by salt composition of media, types and concentrations of plant growth regulators (PGR’s) and their interactions, time of transfer of the cultures. Maximum number of shoots (26.3 ± 0.82 per culture vessel) were regenerated on MS medium modified by reducing the concentration of nitrates to half supplemented with 200 mg l⁻¹ ammonium sulphate {(NH₄) ₂SO₄} (MMS3) + BA (0.25 mg l⁻¹), Kinetin (Kin; 0.25 mg l⁻¹), Indole-3-acetic acid (IAA; 0.1 mg l⁻¹) and additives. The in vitro produced shoots rooted under ex vitro on soilrite moistened with one-fourth strength of MS macro salts in screw cap bottles by treating the shoot base (s) with 500 mg l⁻¹ of Indole-3-butyric acid (IBA) for 5 min. The micropropagated plants were hardened in the green house. The described protocol can be applicable for (i) large scale plant production (ii) establishment of plants in natural habitat and (iii) germplasm conservation of this endemic Gymnosperm of arid regions.     

Effect of Ascorbic Acid on the Degradation of Cyanocobalamin and Hydroxocobalamin in Aqueous Solution: A Kinetic Study

The degradation kinetics of 5 × 10⁻⁵ M cyanocobalamin (B₁₂) and hydroxocobalamin (B_12b) in the presence of ascorbic acid (AH₂) was studied in the pH range of 1.0–8.0. B₁₂ is degraded to B_12b which undergoes oxidation to corrin ring cleavage products. B_12b alone is directly oxidized to the ring cleavage products. B₁₂ and B_12b in degraded solutions were simultaneously assayed by a two-component spectrometric method at 525 and 550 nm without interference from AH₂. Both degrade by first-order kinetics and the values of the rate constants at pH 1.0–8.0 range from 0.08 to 1.05 × 10⁻⁵ s⁻¹ and 0.22–7.62 × 10⁻⁵ s⁻¹, respectively, in the presence of 0.25 × 10⁻³ M AH₂. The t_1/2 values of B₁₂ and B_12b range from 13.7 to 137.5 h and 2.5–87.5 h, respectively. The second-order rate constants for the interaction of AH₂ with B₁₂ and B_12b are 0.05–0.28 × 10⁻² and 1.10–30.08 × 10⁻² M⁻¹ s⁻¹, respectively, indicating a greater effect of AH₂ on B_12b compared to that of B₁₂. The k_obs–pH profiles for both B₁₂ and B_12b show the highest rates of degradation around pH 5. The degradation of B₁₂ and B_12b by AH₂ is affected by the catalytic effect of phosphate ions on the oxidation of AH₂ in the pH range 6.0–8.0.KEY WORDS: ascorbic acid, cyanocobalamin, degradation, hydroxocobalamin, kinetics, two-component spectrometry     

Butyric acid fermentation from pretreated and hydrolysed wheat straw by an adapted Clostridium tyrobutyricum strain

Butyric acid is a valuable building-block for the production of chemicals and materials and nowadays it is produced exclusively from petroleum. The aim of this study was to develop a suitable and robust strain of Clostridium tyrobutyricum that produces butyric acid at a high yield and selectivity from lignocellulosic biomasses. Pretreated (by wet explosion) and enzymatically hydrolysed wheat straw (PHWS), rich in C6 and C5 sugars (71.6 and 55.4 g l⁻¹ of glucose and xylose respectively), was used as substrate. After one year of serial selections, an adapted strain of C. tyrobutyricum was developed. The adapted strain was able to grow in 80% (v v⁻¹) PHWS without addition of yeast extract compared with an initial tolerance to less than 10% PHWS and was able to ferment both glucose and xylose. It is noticeable that the adapted C. tyrobutyricum strain was characterized by a high yield and selectivity to butyric acid. Specifically, the butyric acid yield at 60–80% PHWS lie between 0.37 and 0.46 g g⁻¹ of sugar, while the selectivity for butyric acid was as high as 0.9–1.0 g g⁻¹ of acid. Moreover, the strain exhibited a robust response in regards to growth and product profile at pH 6 and 7.     

Photodegradation and Stabilization of Betamethasone-17 Valerate in Aqueous/Organic Solvents and Topical Formulations

The effects of solvent [acetonitrile, methanol, and acetonitrile/water mixture (20:80, v/v)], buffer concentration (phosphate buffer, pH 7.5), ionic strength and commonly employed adjuvants on the photodegradation of betamethasone-17 valerate in cream and gel formulations have been studied on exposure to UV light (300–400 nm). A validated high-performance liquid chromatography method has been used to determine the parent compound and its photodegraded products. The photodegradation data in the studied solvents showed greater decomposition of the drug in solvents with a lower dielectric constant. A comparatively higher rate of photodegradation was observed in the cream formulation compared to that for the gel formulation. The kinetic treatment of the photodegradation data revealed that the degradation of the drug follows first-order kinetics and the apparent first-order rate constants for the photodegradation reactions, in the media studied, range from 1.62 to 11.30 × 10⁻³ min⁻¹. The values of the rate constants decrease with increasing phosphate concentration and ionic strength which could be due to the deactivation of the excited state and radical quenching. The second-order rate constant (k′) for the phosphate ion-inhibited reactions at pH 7.5 has been found to be 5.22 × 10⁻² M⁻¹ s⁻¹. An effective photostabilization of the drug has been achieved in cream and gel formulations with titanium dioxide (33.5–42.5%), vanillin (21.6–28.7%), and butyl hydroxytoluene (18.2–21.6%).Key words: betamethasone-17 valerate, creams and gels, kinetics, photodegradation, photostabilization     

Effect of Acetate and Carbonate Buffers on the Photolysis of Riboflavin in Aqueous Solution: A Kinetic Study

The photolysis of riboflavin (RF) in the presence of acetate buffer (pH 3.8–5.6) and carbonate buffer (pH 9.2–10.8) has been studied using a multicomponent spectrophotometric method for the simultaneous assay of RF and its photoproducts. Acetate and carbonate buffers have been found to catalyze the photolysis reaction of RF. The apparent first-order rate constants for the acetate-catalyzed reaction range from 0.20 to 2.86 × 10⁻⁴ s⁻¹ and for the carbonate-catalyzed reaction from 3.33 to 15.89 × 10⁻⁴ s⁻¹. The second-order rate constants for the interaction of RF with the acetate and the carbonate ions range from 2.04 to 4.33 × 10⁻⁴ M⁻¹ s⁻¹ and from 3.71 to 11.80 × 10⁻⁴ M⁻¹ s⁻¹, respectively. The k-pH profile for the acetate-catalyzed reaction is bell shaped and for the carbonate-catalyzed reaction a steep curve. Both HCO₃⁻ and CO₃^2 − ions are involved in the catalysis of the photolysis reaction in alkaline solution. The rate constants for the HCO₃⁻ and CO₃^2 − ions catalyzed reactions are 0.72 and 1.38 × 10⁻³ M⁻¹ s⁻¹, respectively, indicating a major role of CO₃^2 − ions in the catalysis reaction. The loss of RF fluorescence in acetate buffer suggests an interaction between RF and acetate ions to promote the photolysis reaction. The optimum stability of RF solutions is observed in the pH range 5–6, which is suitable for pharmaceutical preparations.KEY WORDS: acetate effect, carbonate effect, photolysis, riboflavin, spectrophotometric assay     

Biosynthesis and Thermal Properties of PHBV Produced from Levulinic Acid by Ralstonia eutropha

Levulinic acid (LA) can be cost-effectively produced from a vast array of renewable carbohydrate-containing biomaterials. LA could facilitate the commercialization of the polymer poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and PHBV-based products as carbon substrates. Therefore, this paper focused on the production of PHBV by Ralstonia eutropha with LA for hydroxyvalerate (HV) production, which plays an important role in enhancing the thermal properties of PHBV. Accordingly, the HV content of PHBV varied from 0–40.9% at different concentrations of LA. Stimulation of cell growth and PHBV accumulation were observed when 2–6 g L⁻¹ LA was supplied to the culture. The optimal nitrogen sources were determined to be 0.5 g L⁻¹ ammonium chloride and 2 g L⁻¹ casein peptone. It was determined that the optimal pH for cell growth and PHBV accumulation was 7.0. When the cultivation was performed in large scale (2 L fermenter) with a low DO concentration of 30% and a pH of 7.0, a high maximum dry cell weight of 15.53 g L⁻¹ with a PHBV concentration of 12.61 g L⁻¹ (53.9% HV), up to 81.2% of the dry cell weight, was obtained. The melting point of PHBV found to be decreased as the fraction of HV present in the polymer increased, which resulted in an improvement in the ductility and flexibility of the polymer. The results of this study will improve the understanding of the PHBV accumulation and production by R. eutropha and will be valuable for the industrial production of biosynthesized polymers.     

Characterization of the kinetic and thermodynamic landscape of RNA folding using a novel application of isothermal titration calorimetry

A novel isothermal titration calorimetry (ITC) method was applied to investigate RNA helical packing driven by the GAAA tetraloop–receptor interaction in magnesium and potassium solutions. Both the kinetics and thermodynamics were obtained in individual ITC experiments, and analysis of the kinetic data over a range of temperatures provided Arrhenius activation energies (ΔH^‡) and Eyring transition state entropies (ΔS^‡). The resulting rich dataset reveals strongly contrasting kinetic and thermodynamic profiles for this RNA folding system when stabilized by potassium versus magnesium. In potassium, association is highly exothermic (ΔH_25°C = −41.6 ± 1.2 kcal/mol in 150 mM KCl) and the transition state is enthalpically barrierless (ΔH^‡ = −0.6 ± 0.5). These parameters are sigificantly positively shifted in magnesium (ΔH_25°C = −20.5 ± 2.1 kcal/mol, ΔH^‡ = 7.3 ± 2.2 kcal/mol in 0.5 mM MgCl₂). Mixed salt solutions approximating physiological conditions exhibit an intermediate thermodynamic character. The cation-dependent thermodynamic landscape may reflect either a salt-dependent unbound receptor conformation, or alternatively and more generally, it may reflect a small per-cation enthalpic penalty associated with folding-coupled magnesium uptake.     

Formulation and Optimization of Nonionic Surfactants Emulsified Nimesulide-Loaded PLGA-Based Nanoparticles by Design of Experiments

This investigation aimed to develop nimesulide (NMS)-loaded poly(lactic-co-glycolic acid) (PLGA)-based nanoparticulate formulations as a biodegradable polymeric drug carrier to treat rheumatoid arthritis. Polymeric nanoparticles (NPs) were prepared with two different nonionic surfactants, vitamin E d-α-tocopheryl polyethylene glycol 1000 succinate (vitamin E TPGS) and poly(vinyl alcohol) (PVA), using an ultrasonication solvent evaporation technique. Nine batches were formulated for each surfactant using a 3² factorial design for optimal concentration of the emulsifying agents, 0.03–0.09% for vitamin E TPGS and 2–4% for PVA. The surfactant percentage and the drug/polymer ratio (1:10, 1:15, 1:20) of the NMS-loaded NPs were investigated based on four responses: encapsulation efficiency, particle size, the polydispersity index, and the surface charge. The response surface plots and linearity curves indicated a relationship between the experiment’s responses and a set of independent variables. The NPs produced with both surfactants exhibited a negative surface charge, and scanning electron micrographs revealed that all of the NPs were spherical in shape. A narrower size distribution and higher drug loadings were achieved in PVA-emulsified PLGA NPs than in the vitamin E TPGS emulsified. Decreasing amounts of both nonionic surfactants resulted in a reduction in the emulsion’s viscosity, which led to a decrease in the particle size of NPs. According to the ANOVA results obtained in this present research, vitamin E TPGS exhibited the best correlation between the independent variables, namely drug/polymer ratio and the surfactant percentage, and the dependent variables (encapsulation efficiency R² = 0.9603, particle size R² = 0.9965, size distribution R² = 0.9899, and surface charge R² = 0.8969) compared with PVA.KEY WORDS: ANOVA, factorial design, nanoparticles, nimesulide, PLGA, PVA, vitamin E TPGS     

Design and In Vitro Evaluation of Finasteride-Loaded Liquid Crystalline Nanoparticles for Topical Delivery

In this study, liquid crystalline nanoparticles (LCN) have been proposed as new carrier for topical delivery of finasteride (FNS) in the treatment of androgenetic alopecia. To evaluate the potential of this nanocarrier, FNS-loaded LCN was prepared by ultrasonication method and characterized for size, shape, in vitro release, and skin permeation–retention properties. The particle size ranged from 153.8 to 170.2 nm with a cubical shape and exhibited controlled release profile with less than 20% of the drug released in the first 24 h. The release profile was significantly altered with addition of different additives. Formulation with lower monoolein exhibited higher skin permeation with a flux rate of 0.061 ± 0.005 μg cm⁻² h⁻¹ in 24 h. The permeation however, significantly increased with glycerol, propylene glycol, and polyethylene glycol 400, while it declined for the addition of oleic acid. A similar trend was observed with skin retention study. In conclusion, FNS-loaded LCN could be advocated as a viable alternative for oral administration of the drug.Key words: androgenetic alopecia, finasteride, liquid crystalline nanoparticles, release, skin permeation–retention     

Evolutionary engineering of a glycerol‐3‐phosphate dehydrogenase‐negative,acetate‐reducing Saccharomyces cerevisiae strain enables anaerobic growth at high glucose concentrations

Glycerol production by Saccharomyces cerevisiae, which is required for redox-cofactor balancing in anaerobic cultures, causes yield reduction in industrial bioethanol production. Recently, glycerol formation in anaerobic S. cerevisiae cultures was eliminated by expressing Escherichia coli (acetylating) acetaldehyde dehydrogenase (encoded by mhpF) and simultaneously deleting the GPD1 and GPD2 genes encoding glycerol-3-phosphate dehydrogenase, thus coupling NADH reoxidation to reduction of acetate to ethanol. Gpd^– strains are, however, sensitive to high sugar concentrations, which complicates industrial implementation of this metabolic engineering concept. In this study, laboratory evolution was used to improve osmotolerance of a Gpd^– mhpF-expressing S. cerevisiae strain. Serial batch cultivation at increasing osmotic pressure enabled isolation of an evolved strain that grew anaerobically at 1 M glucose, at a specific growth rate of 0.12 h⁻¹. The evolved strain produced glycerol at low concentrations (0.64 ± 0.33 g l⁻¹). However, these glycerol concentrations were below 10% of those observed with a Gpd⁺ reference strain. Consequently, the ethanol yield on sugar increased from 79% of the theoretical maximum in the reference strain to 92% for the evolved strains. Genetic analysis indicated that osmotolerance under aerobic conditions required a single dominant chromosomal mutation, and one further mutation in the plasmid-borne mhpF gene for anaerobic growth.     

Antioxidants and ROS scavenging ability in ten Darjeeling tea clones may serve as markers for selection of potentially adapted clones against abiotic stress

Ten Darjeeling tea clones (BT15/263, RR17/144, B777, T253, B157, Sundaram, HV39, AV2, K1/1 and TTV1) were collected from the experimental garden of Darjeeling Tea Research and Development Centre, Kurseong. Total phenol, flavonoids and two antioxidating enzymes (peroxidase and superoxide dismutase) were estimated. The total phenol ranged between 241 and 28 GAE mg g⁻¹ of leaf dry weight. The highest amount obtained in four clones, B15/263 (241.47), RR17/144 (221.2), B777 (154.54) and B157 (140.23 mg g⁻¹). Flavonoids were estimated as Catechin equivalent (CE) and ranged between 56.88 and 20.81 CE mg g⁻¹ leaf dry weight. Higher amounts occurred in BT15/263 (56.88 mg g⁻¹), B777 (56.69) and RR17/144 (48.63). Antioxidant activities were measured following DPPH and ABTS free radicle scavenging procedures and the results were well according to total polyphenol content among the clones (in total phenols, ranges of correlation in DPPH assay were r² = 0.990–0.989, p ≤ 0.05; in flavonoids r² = 0.954, p ≤ 0.01–0.987, p ≤ 0.05). Similarly, ABTS percent scavenging results were quiet significant. The IC₅₀ values were determined for both DPPH and ABTS assay. PAGE expressions of isoforms in two antioxidative enzymes and quantification of them also varied much among the investigated clones. The incidence of total phenols, flavonoids, PRX and SOD and ROS scavenging assay in in-situ condition, might be used as biochemical markers towards the superior adaptability against abiotic stress. In the present work, four clones (B15/263, B777, RR17/144 and B157) would be designated as comparatively better suited to the predicted abiotic stress.     

Gradients in microbial methanol uptake: productive coastal upwelling waters to oligotrophic gyres in the Atlantic Ocean

Methanol biogeochemistry and its importance as a carbon source in seawater is relatively unexplored. We report the first microbial methanol carbon assimilation rates (k) in productive coastal upwelling waters of up to 0.117±0.002 d⁻¹ (∼10 nmol l⁻¹d⁻¹). On average, coastal upwelling waters were 11 times greater than open ocean northern temperate (NT) waters, eight times greater than gyre waters and four times greater than equatorial upwelling (EU) waters; suggesting that all upwelling waters upon reaching the surface (⩽20 m), contain a microbial population that uses a relatively high amount of carbon (0.3–10 nmol l⁻¹d⁻¹), derived from methanol, to support their growth. In open ocean Atlantic regions, microbial uptake of methanol into biomass was significantly lower, ranging between 0.04–0.68 nmol l⁻¹d⁻¹. Microbes in the Mauritanian coastal upwelling used up to 57% of the total methanol for assimilation of the carbon into cells, compared with an average of 12% in the EU, and 1% in NT and gyre waters. Several methylotrophic bacterial species were identified from open ocean Atlantic waters using PCR amplification of mxaF encoding methanol dehydrogenase, the key enzyme in bacterial methanol oxidation. These included Methylophaga sp., Burkholderiales sp., Methylococcaceae sp., Ancylobacter aquaticus, Paracoccus denitrificans, Methylophilus methylotrophus, Methylobacterium oryzae, Hyphomicrobium sp. and Methylosulfonomonas methylovora. Statistically significant correlations for upwelling waters between methanol uptake into cells and both chlorophyll a concentrations and methanol oxidation rates suggest that remotely sensed chlorophyll a images, in these productive areas, could be used to derive total methanol biological loss rates, a useful tool for atmospheric and marine climatically active gas modellers, and air–sea exchange scientists.     

CFH, VEGF, and PEDF genotypes and the response to intravitreous injection of bevacizumab for the treatment of age-related macular degeneration

We determined whether there is an association between complement factor H (CFH), high-temperature requirement A-1 (HTRA1), vascular endothelial growth factor (VEGF), and pigment epithelium-derived factor (PEDF) genotypes and the response to treatment with a single intravitreous injection of bevacizumab for age-related macular degeneration (AMD). Eighty-three patients with exudative AMD treated by bevacizumab injection were genotyped for three single nucleotide polymorphisms (SNPs; rs800292, rs1061170, rs1410996) in the CFH gene, a rs11200638-SNP in the HTRA1 gene, three SNPs (rs699947, rs1570360, rs2010963) in the VEGF gene, and four SNPs (rs12150053, rs12948385, rs9913583, rs1136287) in the PEDF gene using a TaqMan assay. The CT genotype (heterozygous) of CFH-rs1061170 was more frequently represented in nonresponders in vision than TT genotypes (nonrisk allele homozygous) at the time points of 1 and 3 months, while there was no CC genotype (risk allele homozygous) in our study cohort (p = 7.66 × 10⁻³, 7.83 × 10⁻³, respectively). VEGF-rs699947 was also associated with vision changes at 1 month and PEDF-rs1136287 at 3 months (p = 5.11 × 10⁻³, 2.05 × 10⁻², respectively). These variants may be utilized for genetic biomarkers to estimate visual outcomes in the response to intravitreal bevacizumab treatment for AMD.     

Cloning of ε‐poly‐L‐lysine (ε‐PL) synthetase gene from a newly isolated ε‐PL‐producing Streptomyces albulus NK660 and its heterologous expression in Streptomyces lividans

ε-Poly-L-lysine (ε-PL), showing a wide range of antimicrobial activity, is now industrially produced as a food additive by a fermentation process. A new strain capable of producing ε-PL was isolated from a soil sample collected from Gutian, Fujian Province, China. Based on its morphological and biochemical features and phylogenetic similarity with 16S rRNA gene, the strain was identified as Streptomyces albulus and named NK660. The yield of ε-PL in 30 l fed-batch fermentation with pH control was 4.2 g l⁻¹ when using glycerol as the carbon source. The structure of ε-PL was determined by nuclear magnetic resonance (NMR) and matrix-assisted laser desorption/ionization–time of flight mass spectrometry (MALDI-TOF MS). Previous studies have shown that the antimicrobial activity of ε-PL is dependent on its molecular size. In this study, the polymerization degree of the ε-PL produced by strain NK660 ranged from 19 to 33 L-lysine monomers, with the main component consisting of 24–30 L-lysine monomers, which implied that the ε-PL might have higher antimicrobial activity. Furthermore, the ε-PL synthetase gene (pls) was cloned from strain NK660 by genome walking. The pls gene with its native promoter was heterologously expressed in Streptomyces lividans ZX7, and the recombinant strain was capable of synthesizing ε-PL. Here, we demonstrated for the first time heterologous expression of the pls gene in S. lividans. The heterologous expression of pls gene in S. lividans will open new avenues for elucidating the molecular mechanisms of ε-PL synthesis.     

Role of nitrogen and magnesium for growth,yield and nutritional quality of radish

Nitrogen (N) affects all levels of plant function from metabolism to resource allocation, growth, and development and Magnesium (Mg) is a macronutrient that is necessary to both plant growth and health. Radish (Raphanus sativus L.) occupies an important position in the production and consumption of vegetables globally, but there are still many problems and challenges in its nutrient management. A pot trial was conducted to investigate the effects of nitrogen and magnesium fertilizers on radish during the year 2018–2019. Nitrogen and magnesium was applied at three rates (0, 0.200, and 0.300 g N kg⁻¹ soil) and (0, 0.050, and 0.100 g Mg kg⁻¹ soil) respectively. The experiment was laid out in a completely randomized design (CRD) and each treatment was replicated three times. Growth, yield and quality indicators of radish (plant height, root length, shoot length, plant weight, total soluble sugar, ascorbic acid, total soluble protein, crude fiber, etc.) were studied. The results indicated that different rates of nitrogen and magnesium fertilizer not only influence the growth dynamics and yields but also enhances radish quality. The results revealed that the growth, yield and nutrient contents of radish were increased at a range of 0.00 g N. kg⁻¹ soil to 0.300 g N. kg⁻¹ soil and 0.00 g Mg. kg⁻¹ soil to 0.050 g Mg. kg⁻¹ soil and then decreased gradually at a level of 0.100 g Mg. kg⁻¹ soil. In contrast, the crude fiber contents in radish decreased significantly with increasing nitrogen and magnesium level but increased significantly at Mg₂ level (0.050 g Mg. kg⁻¹ soil). The current study produced helpful results for increasing radish quality, decreasing production costs, and diminishing underground water contamination.     

Enhanced Topical Delivery of Finasteride Using Glyceryl Monooleate-Based Liquid Crystalline Nanoparticles Stabilized by Cremophor Surfactants

The aim of this study was to investigate the capability of two surfactants, Cremophor RH 40 (RH) and Cremophor EL (EL), to prepare liquid crystalline nanoparticles (LCN) and to study its influence on the topical delivery of finasteride (FNS). FNS-loaded LCN was formulated with the two surfactants and characterized for size distribution, morphology, entrapment efficiency, in vitro drug release, and skin permeation/retention. Influence of FNS-loaded LCN on the conformational changes on porcine skin was also studied using attenuated total reflectance Fourier-transform infrared spectroscopy. Transmission electron microscopical image confirmed the formation of LCN. The average particle size of formulations was in the range of 165.1–208.6 and 153.7–243.0 nm, respectively. The formulations prepared with higher surfactant concentrations showed faster release and significantly increased skin permeation. Specifically, LCN prepared with RH 2.5% presented higher permeation flux (0.100 ± 0.005 μgcm⁻²h⁻¹) compared with lower concentration (0.029 ± 0.007 μgcm⁻²h⁻¹). Typical spectral bands of lipid matrix of porcine skin were shifted to higher wavenumber, indicating increased degree of disorder of the lipid acyl chains which might cause fluidity increase of stratum corneum. Taken together, Cremophor surfactants exhibited a promising potential to stabilize the LCN and significantly augmented the skin permeation of FNS.KEY WORDS: Cremophor, finasteride, liquid crystalline nanoparticles, skin permeation–retention