Biodegradation kinetics of poly(3-hydroxybutyrate)-based biopolymer systems

The aim of this study was to evaluate and to compare the long-term kinetics curves of biodegradation of poly(3-hydroxybutyrate) (PHB), its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and a PHB/polylactic acid composite. The total weight loss and the change of average viscosity molecular weight were used as the parameters reflecting the biodegradation degree. The rate of biodegradation was analyzed in vitro in the presence of lipase and in vivo after film implantation in animal tissues. The morphology of the PHB film surface was studied by the atomic force microscopy technique. It was shown that PHB biodegradation involves both polymer hydrolysis and its enzymatic biodegradation. The results obtained in this study can be used for the development of various PHB-based medical devices.     

Evaluation of amylose used as a drug delivery carrier

The enzyme-dependent conjugates of indomethacin and amylose (Am-IND) were synthesized at room temperature using N,N′-dicyclohexylcarbodiimide (DCC) as a coupling agent and 4-(N,N′-dimethylamino) pyridine (DMAP) as a catalyst. Their structures were characterized by FTIR and ¹H NMR analyses, and the results indicated that the IND residues were conjugated with amylose backbones through ester bonds. For the conjugate with a lower IND content, the better water absorption property was advantageous for enzymes diffusing into the swollen conjugate, resulting in biodegradation of the conjugates and release of IND. In vitro biodegradation evaluation indicated that the Am-IND conjugates were biodegraded in the simulated media of the intestines. In vitro drug release experiments showed that the Am-IND conjugates exhibited a sustained release behavior in the simulated media of the intestines, while IND was hardly released in the simulated gastric fluid. These features provide a great opportunity to use the conjugates as a prodrug for intestinally targeted and controlled release of IND through oral administration. This study may lead to the development of effective methods for utilizing amylose as a new drug delivery carrier.     

In vivo degradation of oxidized, regenerated cellulose

Oxidized, regenerated cellulose (ORC) was surgically implanted on the uterine horns of rabbits, and its biodegradation was studied in vivo. Samples of peritoneal lavages, serum, and urine were collected during the degradation process and analyzed for carbohydrate components utilizing high-performance liquid chromatography with pulsed amperometric detection (h.p.l.c.-p.a.d.). Degradation was rapid, and oligomeric products were evident primarily in the peritoneal fluid from the implantation site, with no apparent accumulation in either the serum or the urine. The size distribution and the amount of the oligomeric products decreased after day one, and by day four peritoneal lavages were essentially free of oligomers. The structure of the products formed was consistent with the lability of the polymer in solution, and the kinetics of degradation paralleled the results of the previously reported in vitro studies. Rabbit peritoneal macrophages, when incubated with ORC in vitro were observed to readily ingest and hydrolyze the polymeric material. A mechanism of degradation consisting of chemical depolymerization, followed by enzymatic hydrolysis mediated by glycosidases endogenous to peritoneal macrophages, is proposed.     

The proboscis of eye-frequenting and piercing Lepidoptera (Insecta)

The external structures of the proboscis are investigated in eye-frequenting species of Noctuidae, Geometridae and Pyralidae by means of scanning electron microscopy. They are compared with non-eye-frequenting representatives of these families. In Noctuidae, highly specialized fruit-piercing, skin-piercing blood-sucking, and sweat-feeding representatives have been included. All hemi- and eulachryphagous species have a soft proboscis tip which is characterized by few sensilla and strongly elongated, dentate plates of the dorsal galeal linkage. The latter structures leave broad gaps between them that lead into the food canal at the tip. This arrangement permits the uptake of fluid suspensions such as lachrymal fluid, wound exudates and pus. The modified dorsal galeal linkage is regarded as an adaptation for this highly derived feeding habit. The rough surface of the proboscis is likely to cause irritation and possible mechanical damage to the conjunctiva and cornea which results in an increased lachrymal flow and production of pus. In contrast to fruit-piercing and skin-piercing Noctuidae, there are no erectile structures on the proboscis of eye-frequenting species.—The comparison with related non-eye-frequenting species demonstrates that the particular morphology of the proboscis tip in lachryphagous moths evolved convergently in different families of Leipdoptera.     

Biodegradation of PCBs in two-phase partitioning bioreactors following solid extraction from soil

This article demonstrates the feasibility of a novel process concept for the remediation of PCB contaminated soil. The proposed process consists of PCB extraction from soil using solid polymer beads, followed by biodegradation of the extracted PCBs in a solid-liquid two-phase partitioning bioreactor (TPPB), where PCBs are delivered from the polymer beads to the degrading organisms. The commercially available thermoplastic polymer Hytrel was used to extract Aroclor 1242 from contaminated artificial soil in bench scale experiments. Initial PCB contamination levels of 100 and 1,000 mg kg(-1) could be reduced to 32% +/- 1 to 41% +/- 7 of the initial value after 48 h mixing in the presence of a mobilizing agent at polymer-to-soil ratios of 1% (w/w) and 10% (w/w). The decrease of detectable PCBs in the soil was consistent with an increase of PCBs in the polymer beads. It was further shown that Aroclor 1242 could be delivered to the PCB degrading organism Burkholderia xenovorans LB400 in a solid-liquid TPPB via Hytrel beads. A total of 70 mg Aroclor 1242 could be degraded in a 1 L solid-liquid TPPB within 80 h of operation.     

Evenly tritium-labeled peptides and their in vivo and in vitro biodegradation

Biologically active peptides evenly labeled with tritium were used for studying the in vitro and in vivo biodegradation of the peptides. Tritium-labeled peptides with a specific radioactivity of 50-150 Ci/mmol were obtained by high temperature solid phase catalytic isotope exchange (HSCIE) with spillover tritium. The distribution of the isotope label among all amino acid residues of these peptides allows the simultaneous determination of practically all possible products of their enzymatic hydrolysis. The developed analytical method includes extraction of tritium-labeled peptides from organism tissues and chromatographic isolation of individual labeled peptides from the mixture of degradation products. The concentrations of a peptide under study and the products of its biodegradation were calculated from the results of liquid scintillation counting. This approach was used for studying the pathways of biodegradation of the heptapeptide TKPRPGP (Selank) and the tripeptide PGP in blood plasma. The pharmacokinetics of Selank, an anxiolytic peptide, was also studied in brain tissues using the intranasal in vivo administration of this peptide. The concentrations of labeled peptides were determined, and the pentapeptide TKPRP, tripeptide TKP, and dipeptides RP and GP were shown to be the major products of Selank biodegradation. The study of the biodegradation of the heptapeptide MEHFPGP (Semax) in the presence of nerve cells showed that the major products of its biodegradation are the pentapeptide HFPGP and tripeptide PGP. The enkephalinase activity of blood plasma was studied with the use of evenly tritium-labeled [Leu]enkephalin. A high inhibitory effect of Semax on blood plasma enkephalinases was shown to arise from its action on aminopeptidases. The method, based on the use of evenly tritium-labeled peptides, allows the determination of peptide concentrations and the activity of enzymes involved in their degradation on a tg scale of biological samples both in vitro and in vivo.     

Evenly tritium labeled peptides in study of peptide in vivo and in vitro biodegradation

Biologically active peptides evenly labeled with tritium were used for studying the in vitro and in vivo biodegradation of the peptides. Tritium-labeled peptides with a specific radioactivity of 50–150 Ci/mmol were obtained by high temperature solid phase catalytic isotope exchange (HSCIE) with spillover tritium. The distribution of the isotope label among all amino acid residues of these peptides allows the simultaneous determination of practically all possible products of their enzymatic hydrolysis. The developed analytical method includes extraction of tritium-labeled peptides from organism tissues and chromatographic isolation of individual labeled peptides from the mixture of degradation products. The concentrations of a peptide under study and the products of its biodegradation were calculated from the results of liquid scintillation counting. This approach was used for studying the pathways of biodegradation of the heptapeptide TKPRPGP (Selank) and the tripeptide PGP in blood plasma. The pharmacokinetics of Selank, an anxiolytic peptide, was also studied in brain tissues using the intranasal in vivo administration of this peptide. The concentrations of labeled peptides were determined, and the pentapeptide TKPRP, tripeptide TKP, and dipeptides RP and GP were shown to be the major products of Selank biodegradation. The study of the biodegradation of the heptapeptide MEHFPGP (Semax) in the presence of nerve cells showed that the major products of its biodegradation are the pentapeptide HFPGP and tripeptide PGP. The enkephalinase activity of blood plasma was studied with the use of evenly tritium labeled [Leu]enkephalin. A high inhibitory effect of Semax on blood plasma enkephalinases was shown to arise from its action on aminopeptidases. The method, based on the use of evenly tritium-labeled peptides, allows the determination of peptide concentrations and the activity of enzymes involved in their degradation on a μg scale of biological samples both in vitro and in vivo.     

Synergistic effect of calcium stearate and photo treatment on the rate of biodegradation of low density polyethylene spent saline vials

The biodegradation of spent saline bottles, a low density polyethylene product (LDPE) by two selected Arthrobacter sp. under in vitro conditions is reported. Chemical and UV pretreatment play a vital role in enhancing the rate of biodegradation. Treated LDPE film exhibits a higher weight loss and density when compared to untreated films. Arthrobacter oxydans and Arthrobacter globiformis grew better in medium containing pretreated film than in medium containing untreated film. The decrease in density and weight loss of LDPE was also more for pretreated film when compared to untreated film indicating the affect of abiotic treatment on mechanical properties of LDPE. The decrease in the absorbance corresponding to carbonyl groups and double bonds that were generated during pretreatment suggest that some of the double bonds were cut by Arthrobacter species. Since Arthrobacter sp. are capable of degrading urea, splitting of urea group were also seen in FTIR spectrum indicating the evidence of biodegradation after microbial incubation. The results indicated that biodegradation rate could be enhanced by exposing LDPE to calcium stearate (a pro-oxidant) which acts as an initiator for the oxidation of the polymers leading to a decrease of molecular weight and formation of hydrophilic group. Therefore, the initial step for biodegradation of many inert polymers depends on a photo-oxidation of those polymers. The application in sufficient details with improved procedures utilizing recombinant microorganism with polymer degradation capacity can lead to a better plastic waste management in biomedical field. The present plastic disposal trend of waste accumulation can be minimized with this promising eco-friendly technique.     

Mechanical degradation of polyacrylamide solutions as a model for flow induced blood damage in artificial organs

Human or animal blood is normally used as a test fluid for the in vitro evaluation of hemolysis by artificial organs. However, blood has some disadvantages (large biological variability and problems with cleaning the devices). For that reason, we searched for a reproducible technical fluid with blood-like flow characteristics that exhibits similar shear depending destruction. In this study, a direct comparison between erythrocyte damage of bovine blood and shear-induced degradation of polyacrylamide solution is given. A uniform shear field was applied to the fluids using a shear device with a plate-plate geometry. It was shown that similarities exist between erythrocytes disaggregation and breakdown of super molecular structures in polymer solutions, caused by mechanical stress. In both cases steady low shear viscositity was diminished and the elastic component of complex viscosity of blood and polymer solutions has been reduced. There is a correlation between shear-induced hemolysis of bovine blood and mechanical polymer-degradation, which depends on the applied shear stresses.     

Biodegradation of chemically modified flax fibers in soil and in vitro with selected bacteria

The extent and rate of degradation of flax (Linum usitatissimum) fibers, both in the native state and after surface chemical modification (acetylation or poly(ethylene glycol), PEG, grafting), was investigated under laboratory conditions in two different biodegrading environments. Degradation of the fibers under aerobic conditions by the action of the microorganisms present in soil is assessed with the ASTM 5988-96 method by monitoring carbon dioxide evolution. In vitro biodegradation experiments were carried out by exposing the fibers to a pure culture of Cellvibrio fibrovorans bacteria and measuring the mass loss as a function of time. Despite the complexity of the system, the results of degradation in soil were satisfactorily reproducible, although the absolute rates were found to change in different experiments using the same soil. The degradation rate of acetylated fibers in soil nearly equals that of unmodified fibers, whereas in the pure culture, acetylated fibers biodegrade slower than native fibers. The opposite happens with the PEG-grafted fibers, which degrade slower than unmodified flax in soil and at a comparable rate upon in vitro exposure to the bacterial culture. The different biodegradation kinetics observed in the two biodegrading environments were attributed to differences of biocenoses, abiotic factors, and biodegradation assessing methods. Nevertheless, the final extent of biodegradation was the same for modified and unmodified fibers both in soil and in the pure culture, showing that the surface chemical modifications applied do not significantly affect biodegradability of the flax fibers.     

Poly-(cyclo)dextrins as ethoxzolamide carriers in ophthalmic solutions and in contact lenses

Efficient ophthalmic therapy requires the development of strategies that can provide sufficiently high drug levels in the ocular structures for a prolonged time. This work focuses on the suitability of poly-(cyclo)dextrins as carriers able to solubilize the carbonic anhydrase inhibitor (CAI) ethoxzolamide (ETOX), which is so far used for oral treatment of glaucoma. Topical ocular treatment should notably enhance the efficiency/safety profile of the drug. Natural α-, β- and γ-cyclodextrins and a maltodextrin were separately polymerized using citric acid as cross-linker agent under mild conditions. The resultant hydrophilic polymers exhibited larger capability to solubilize ETOX than the pristine (cyclo)dextrins. Moreover, they provided sustained drug diffusion in artificial lachrymal fluid. Interestingly the poly-(cyclo)dextrins solutions facilitate the loading of remarkably high doses of ETOX in poly(2-hydroxyethyl methacrylate)-based contact lenses. Exploiting ionic interactions between functional groups in the contact lenses and remnant free carboxylic acids in the citric acid linkers of poly-(cyclo)dextrins led to the retention of the drug-loaded poly-(cyclo)dextrins and, in turn, to sustained release for several weeks.     

一株替代粪肠球菌的生产用芽胞杆菌筛选及其性质

目的 筛选1株能够产业化、替代粪肠球菌的芽胞杆菌。方法 从健康鸡、鸭、仔猪的粪便与肠道内容物中筛选,采用选择性培养基和耐酸耐胆盐发酵,通过耐人工肠液和人工胃液试验与粪肠球菌比较得到1株产酸能力较好的替代粪肠球菌的芽胞杆菌,并对其性质进行研究。结果 所筛选的芽胞杆菌（GY0520）对人工胃液、人工肠液有很好耐受性,90 ℃水浴15 min存活率为97%,能够产生大量有机酸,有利于提高动物机体的抗病能力及改善其生理性能,但对抗生素有一定的敏感性,不能配伍使用。结论 所筛选的芽胞杆菌能够替代粪肠球菌用于生产,为养殖业的微生态产品提高稳定性提供参考。     

A hybrid genetic--neural algorithm for modeling the biodegradation process of DnBP in AAO system

A hybrid artificial neural network - genetic algorithm numerical technique was successfully developed to model, and to simulate the biodegradation process of di-n-butyl phthalate in an anaerobic/anoxic/oxic (AAO) system. The fate of DnBP was investigated, and a removal kinetic model including sorption and biodegradation was formulated. To correlate the experimental data with available models or some modified empirical equations, the steady state model equations describing the biodegradation process have been solved using genetic algorithm (GA) and artificial neural network (ANN) from the water quality characteristic parameters. Compared with the kinetic model, the performance of the GA-ANN for modeling the DnBP was found to be more impressive. The results show that the predicted values well fit measured concentrations, which was also supported by the relatively low RMSE (0.2724), MAPE (3.6137) and MSE (0.0742)and very high R (0.9859) values, and which illustrates the GA-ANN model predicting effluent DnBP more accurately than the mechanism model forecasting.     

一株高效丙烯腈降解细菌Rhodococus rhodochrous BX2的丙烯腈降解条件优化

【目的】以丙烯腈为目标污染物,利用实验室已筛选获得的一株高效腈降解菌Rhodococus rhodochrous BX2,研究其对丙烯腈的降解特性,优化降解条件以提高菌株对丙烯腈的降解能力。【方法】通过单因素试验和响应面分析相结合的方法优化Rhodococus rhodochrous BX2对丙烯腈的降解条件。考察外加碳、氮源对BX2的生长及丙烯腈降解的影响,并确定其在丙烯腈合成废水中对丙烯腈的处理效果。【结果】菌株BX2优化后的最佳降解条件为:底物浓度403.51 mg/L、p H 7.44、温度34.46°C,在此条件下丙烯腈的降解率为95.1%。外加碳源为葡萄糖,或外加氮源为氯化铵对菌株生长及丙烯腈降解有明显的促进作用。菌株Rhodococus rhodochrous BX2能够高效降解合成废水中的丙烯腈,在30 h时其丙烯腈降解率可达89.4%。【结论】降解条件优化以及外源物质的添加强化了菌株对丙烯腈合成废水的处理效果,为生物法处理丙烯腈废水新方法的开发提供技术支持。     

除草剂二甲戊灵的真菌降解及其特性研究

富集分离了除草剂二甲戊灵降解真菌,并研究了其降解特性,结果表明,真菌可以降解二甲戊灵,利用富集培养的方法从环境中分离到16株能降解二甲戊灵的真菌。其中10株真菌5d内对100mg·L^-1二甲戊灵的降解率大于60％,以其中3株生理耐受能力强、降解能力高的真菌为例,研究了外加碳源浓度、初始pH值、二甲戊灵浓度和培养温度对真菌生长量和降解能力的影响,此3株真菌经鉴定分别属于土生曲霉组(Aspergillus terreus)、长梗串孢霉属(Monilochaetes)和烟色曲霉组(Aspergillus furnigatus),在外加碳源浓度为0．5％～1．0％的范围内,真菌生长量和降解率达到最大;在中性培养液中,3株真菌的生长量大,降解能力强;在浓度为100mg·L^-1时降解率和生长量都比较大,而绝对去除量随二甲戊灵浓度的提高而增加,在500mg·L^-1时达到最大;真菌的生长和降解需要适宜的温度,20～30℃培养时,降解率和生长量最大,可为农药污染治理及生产污水处理提供理论依据。     

Indirect bioremediation: biodegradation of hydrocarbons on a commercial sorbent

Urea-formaldehyde polymer is currently used as asorbent for containment and clean up of hydrocarbons. The aerobic biodegradability of this polymer andhydrocarbons sorbed to the polymer were tested. Soilmicroorganisms readily grew on the polymer, and twoorganisms, a bacterium and a fungus, capable of growthon the polymer were isolated. However, biodegradationof the polymer was very slow and possibly incomplete. Biodegradation of the polymer was evident as a changein appearance of the polymer, but disappearance of thepolymer was not detectable in liquid culturesincubated for six months or soil cultures incubatedfor one month. Destruction of the polymer by soilmicroorganisms at ambient temperature does not appearto be practical. Degradation of ¹⁴C-labeledhexadecane and phenanthrene mixed with crude oil inliquid cultures inoculated with soil microorganismswas used as an estimate of general hydrocarbondegradation. When nitrogen was not limiting, therates of hexadecane and phenanthrene degradation werethe same, whether those hydrocarbons were sorbed tothe polymer or not sorbed. When nitrogen waslimiting, the polymer stimulated the rate ofhexadecane degradation but not the rate ofphenanthrene degradation. The polymer may stimulatehexadecane degradation by serving as a source ofnitrogen. However, optimal degradation of sorbedhydrocarbons requires nitrogen addition. The resultssuggest that it may be feasible to decontaminate spentpolymer by biodegradation of sorbed hydrocarbons.     

Modeling of crude oil biodegradation using two phase partitioning bioreactor

In this work, crude oil biodegradation has been optimized in a solid‐liquid two phase partitioning bioreactor (TPPB) by applying a response surface methodology based d ‐optimal design. Three key factors including phase ratio, substrate concentration in solid organic phase, and sodium chloride concentration in aqueous phase were taken as independent variables, while the efficiency of the biodegradation of absorbed crude oil on polymer beads was considered to be the dependent variable. Commercial thermoplastic polyurethane (Desmopan®) was used as the solid phase in the TPPB. The designed experiments were carried out batch wise using a mixed acclimatized bacterial consortium. Optimum combinations of key factors with a statistically significant cubic model were used to maximize biodegradation in the TPPB. The validity of the model was successfully verified by the good agreement between the model‐predicted and experimental results. When applying the optimum parameters, gas chromatography‐mass spectrometry showed a significant reduction in n‐alkanes and low molecular weight polycyclic aromatic hydrocarbons. This consequently highlights the practical applicability of TPPB in crude oil biodegradation. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:797–805, 2014     

Morphological observations and the effects of artificial digestive fluids on the survival of Diploscapter coronata from a Japanese patient

Unusual non-human parasitic nematodes and eggs were detected in the faeces of an 8-year-old Japanese female suffering from Henoch-Sch?nlein purpura. The worms were adult female rhabditiform nematodes measuring 325.6-441.2 micro m in length and 18.3-26.5 micro m in width. One pair of the labia oris was notched with many spiny projections, while the other pair was strongly curved outwards. The worms were identified using light and scanning electron microscopy as the free-living nematode Diploscapter coronata (Cobb) based on their characteristic morphology. The patient's faeces containing worms and eggs were cultured using a filter-paper culture technique and after 7 days of culture, male as well as female worms were recovered. Worm survival time and hatchability of the eggs were examined in vitro after treatment with an artificial gastric or intestinal fluid. Although adult worms survived for less than one minute, eggs hatched after treatment with artificial gastric fluid. This suggests that eggs accidentally ingested or produced by adult D. coronata could develop in the human gastro-intestinal tract. Some morphological features of male D. coronata are also described.     

The physiology of sperm recovered from the human cervix: acrosomal status and response to inducers of the acrosome reaction

Cervical mucus was collected from 35 women after artificial insemination. Mucus collections were performed at 1 h, 1 day, 2 days, or 3 days following insemination. Sperm viability was greater than 80% at all recovery times as assessed by exclusion of the supravital dye Hoechst 33258. Virtually 100% of the viable sperm were acrosome-intact at all times as assessed with a fluorescein isothiocyanate-conjugated pea lectin. Sperm were recovered from the mucus after migration into the Biggers, Whittin, and Whittingham medium in vitro. Sperm did not undergo the acrosome reaction in response to human follicular fluid immediately after migration from the mucus but did respond to this agonist after 6 h of incubation in vitro. Sperm recovered at all times after insemination had the same pattern of response to follicular fluid. Sperm that penetrated a column of cervical mucus in vitro also responded to follicular fluid with an increase in acrosome reactions after migration from the mucus and incubation for 6 h in vitro. Unlike the sperm that migrated from cervical mucus, sperm that were separated from semen by Percoll density centrifugation did not undergo the acrosome reaction when challenged with follicular fluid after 6 h but did respond after 24 h incubation. Sperm that migrated from cervical mucus had a similar increase in acrosome reactions after 6 h incubation, regardless of whether the acrosome reaction agonist was follicular fluid or disaggregated human zona pellucida.(ABSTRACT TRUNCATED AT 250 WORDS)     

Biodegradation study by Pseudomonas sp. of flexible polyurethane foams derived from castor oil

The synthesis and biodegradation of polyurethane foams obtained from environmentally benign processes were studied.Flexible polyurethane foams based on castor oil modified with maleic anhydride (MACO) were synthesized. The synthesis involved a single-stage process by mixing castor oil/MACO (weight ratios 75:25 and 25:75) and 2-4 toluene diisocyanate (TDI) in stoichiometric amount of OH:NCO. The biodegradability studies with cultures of a Pseudomonas sp. strain (DBFIQ-P36) involved incubation periods of 2 months at 37 °C. Polymers were characterized before and after biodegradation by Fourier Transform Infrared Spectroscopy (FT-IR), INSTRON mechanical tester, and Scanning Electron Microscopy (SEM). The results showed that the addition of MACO produces a considerable increase in the rate of degradation and an important change in the chemical and morphological structures. This is due to the presence of ester groups that are vulnerable to chemical hydrolysis and enzymatic attack. The eco-toxicity after the biodegradation was evaluated. Toxic compounds such as primary amines were identified by Gas Chromatography–Mass Spectrometry (GC–MS) in combination with Nuclear Magnetic Resonance (NMR) as degradation products.