Sorption of chromium(VI) from aqueous solution by cassava (Manihot sculenta Cranz.) waste biomass

The sorption of highly toxic Cr(VI) ions by cassava waste biomass was quantitatively investigated. The sorption was found to be influenced by several physico-chemical factors such as agitation speed, temperature, contact time, pH, and sorbent/sorbate ratio. The adsorption data at equilibrium were fitted to Freundlich and Langmuir isotherms. The monolayer sorption capacity was found to be 61.79 mg of Cr(VI) per gram of biomass. The kinetics of Cr(VI) adsorption to pure cassava-tuber-bark wastes were determined based on a pseudo-second-order-rate model using the batch-sorption technique at a temperature of 30 degrees. The kinetics data suggest that the adsorption process is exothermic, and that the rate-limiting step is physisorption. Negative DeltaG(ads) values indicate that the adsorption is spontaneous and exothermic in nature. Also, under optimal conditions (in agitated 1M H(2)SO(4) at 30 degrees), the cassava waste biomass appears to be recyclable.     

pH effects on the removal of Cu2+, Cd2+ and Pb2+ from aqueous solution by waste brewery biomass

An industrial strain of Saccharomyces cerevisiae collected from the waste of a brewing industry was used to remove lead, cadmium and copper from aqueous solutions (1?mm). Metal removal efficiency by using either biomass suspension directly diluted into the metal solutions or biomass previously incubated and washed in distilled water was compared. In all experiments with unwashed biomass a shift in the medium pH from 4.5 to a final value in the 7.0–8.0 range occurred. This pH increase was responsible for a metal precipitation effect associated to the metal biosorption. A very different pH profile was observed when washed biomass was used leading to different removal profiles for Cd²⁺ and Pb²⁺ and a similar one for Cu²⁺. In the absence of biomass, medium components and/or the excreted intracellular products proved to interfere in the metal removal and to be responsible for 80% Pb²⁺ precipitation, in the pH 4.5–5.0 range. To initial metal solution pH, leading to the lowest residual ion concentrations, after 96?h of contact with unwashed biomass and in the absence of pH adjustment, was 4.5–5.0. Continuous or stepwise adjustment of medium pH to this range during the process was unfavourable for metal removal, being the continuous adjustment the worst procedure. In this case, Cd²⁺ was not biosorbed and Cu²⁺ removal decreased from 76 to 33%. However, Pb²⁺ was always extensively removed (89%) and only slightly affected by pH control. The global results suggest different removal mechanisms for each cation. Cu²⁺ was removed by both metal sorption and precipitation, due to the pH shift that occurred during the process, while Cd²⁺ removal showed to be completely dependent of this pH shift. Pb²⁺ was totally and quickly removed, by precipitation, in the presence of the biomass suspension and at pH 4.5. Moreover, the biosorbent changes occurring during the process played an important role in the metal removal when non-viable microbial biomass is used.     

The use of chemically modified and unmodified cassava waste for the removal of Cd, Cu and Zn ions from aqueous solution

The use of different chemically modified cassava waste biomass for the enhancement of the adsorption of three metal ions Cd, Cu and Zn from aqueous solution is reported in this paper. Treating with different concentrations of thioglycollic acid modified the cassava waste biomass.

The sorption rates of the three metals were 0.2303 min⁻¹ (Cd²⁺), 0.0051 min⁻¹ (Cu²⁺), 0.0040 min⁻¹ (Zn²⁺) and 0.109 min⁻¹ (Cd²⁺), 0.0069 min⁻¹ (Cu²⁺), 0.0367 min⁻¹ (Zn²⁺) for 0.5 and 1.00 M chemically modified levels, respectively. The adsorption rates were quite rapid and within 20–30 min of mixing, about 60–80% of these ions were removed from the solutions by the biomass and that chemically modifying the binding groups in the biomass enhanced its adsorption capacity towards the three metals. The results further showed that increased concentration of modifying reagent led to increased incorporation, or availability of more binding groups, in the biomass matrix, resulting in improved adsorptivity of the cassava waste biomass. The binding capacity study showed that the cassava waste, which is a serious environmental nuisance, due to foul odour released during decomposition, has the ability to adsorb trace metals from solutions.     

Adsorption of Hg2+, Cu2+ and Zn2+ ions from aqueous solution using formaldehyde cross-linked modified chitosan-thioglyceraldehyde Schiff's base

A chitosan-thioglyceraldehyde Schiff's base cross-linked magnetic resin (CSTG) was prepared and characterized using various instrumental methods. Then, the prepared resin was used for comparative studies on the removal of toxic metal ions like: Hg(2+), Cu(2+) and Zn(2+) from aqueous solutions. The effects of the initial pH value of the solution, contact time, the initial metal ion concentration and temperature on the adsorption capacity of the composite were investigated. The kinetics data were analyzed by pseudo-first order and pseudo-second order equations. The adsorption kinetics was well described by the pseudo-second order equation, and the adsorption isotherms were better fitted by the Langmuir equation. The maximum theoretical adsorption capacities of the CSTG resin for Hg(2+), Cu(2+) and Zn(2+) were found to be 98±2, 76±1 and 52±1 mg g(-1), respectively. The negative values of Gibbs free energy of adsorption (ΔG(ads°) indicated the spontaneity of the adsorption of all metal ions on the novel resin.     

Studies of biosorption of Pb2+, Cd2+ and Cu2+ from aqueous solutions using Adansonia digitata root powders

The potentials of Adansonia digitata root powders (ADRP) for adsorption of Pb²⁺, Cd²⁺ and Cu²⁺ from aqueous solutions was investigated. Physico-chemical analysis of the adsorbent (ADRP) shows that hydroxyl, carbonyl and amino groups were predominant on the surface of the adsorbent. Scanning Electron Microscope (SEM) image revealed its high porosity and irregular pores in the adsorbent while the Energy Dispersive X-ray Spectrum showed the major element with 53.0% Nitrogen, 23.8% carbon, 9.1% calcium, 7.5% potassium and 6.6% magnesium present. The found optimal conditions were: initial concentration of the metal ions = 0.5 mg/L, pH = 5, contact time = 90 min, adsorbent dose = 0.4 g and particle size = 32 µm. Freundlich isotherm showed good fit for the adsorption of Pb²⁺, Cd²⁺ and Cu²⁺. Dubinin-Radushkevich isotherm revealed that the adsorption processes were physisorption Cd(II) and Cu(II) but chemisorption with respect to Pb(II) ions. The kinetics and thermodynamic studies showed that Pseudo-second order and chemisorptions provided the best fit to the experimental data of Pb (II) ions only. Batch desorption result show that desorption in the acidic media for the metal ions were more rapid and over 90% of the metal ions were recovered from the biomass.     

A general model for biosorption of Cd2+, Cu2+ and Zn2+ by aerobic granules

Aerobic granules are microbial aggregates with a strong and compact structure. This study looked into the feasibility of aerobic granules as a novel type of biosorbent for the removal of individual Cd(2+), Cu(2+) and Zn(2+) from aqueous solution. Based on the thermodynamics of biosorption reaction, a general model was developed to describe the equilibrium biosorption of individual Cd(2+), Cu(2+) and Zn(2+) by aerobic granules. This model provides good insights into the thermodynamic mechanisms of biosorption of heavy metals. The model prediction was in good agreement with the experimental data obtained. It was further demonstrated that the Langmuir, Freundlich and Sips or Hill equations were particular cases of the proposed model. The biosorption capacity of individual Cd(2+), Cu(2+) and Zn(2+) on aerobic granules was 172.7, 59.6 and 164.5 mgg(-1), respectively. These values may imply that aerobic granules are effective biosorbent for the removal of Cd(2+), Cu(2+) and Zn(2+) from industrial wastewater.     

Disturbances on delta aminolevulinate dehydratase (ALA-D) enzyme activity by Pb2+, Cd2+, Cu2+, Mg2+, Zn2+, Na+, K+ and Li+: analysis based on coordination geometry and acid-base Lewis capacity

ALA-D (EC 4.2.1.24) is the first cytosolic enzyme in the haem metabolic pathway. Some metals compete with its major cofactor Zn(2+), modifying both enzyme structure and function. Our purpose was to contribute to the understanding of the biochemical role of metals such as Pb(2+), Cd(2+), Cu(2+), Mg(2+), Zn(2+), Na(+), K(+) and Li(+) on ALA-D, using chicken embryos as experimental model. Mg(2+) and Zn(2+) showed enzyme activation in yolk sac membrane (YSM) (113% at 10(-5) M Mg(2+) and from 10(-4) M Zn(2+)), and slight inactivation in liver. Cd(2+) and Cu(2+) caused a non allosteric inhibition in both tissues (100% from 10(-4) M). Surprisingly Pb(2+) was not such a strong inhibitor. Interference of cations during the Schiff base formation in enzymatic catalysis process is explained considering their Lewis acid-base capacity, coordination geometry and electron configuration of valence. Interactions among monovalent cations and biochemical substances are governed chiefly by its electrostatic potential. 0.1 M K(+) and 0.4 M Na(+) produced 30% of enzymatic inhibition by the interference on interactions among the functional subunits. Li(+) activated the YSM enzyme (130% at 10(-5) M) due to a more specific interaction. This study may contribute to elucidate for the first time the possible structural differences between the YSM and liver enzymes from chicken embryo.     

Biosorption of Cu2+, Cd2+, Pb2+, and Zn2+ using dried marine green macroalga Caulerpa lentillifera

The sorption of Cu2+, Cd2+, Pb2+, and Zn2+ by a dried green macroalga Caulerpa lentillifera was investigated. The removal efficiency increased with pH. The analysis with FT-IR indicated that possible functional groups involved in metal sorption by this alga were O-H bending, N-H bending, N-H stretching, C-N stretching, C-O, SO stretching, and S-O stretching. The sorption of all metal ions rapidly reached equilibrium within 20min. The sorption kinetics of these metals were governed by external mass transfer and intraparticle diffusion processes. The sorption isotherm followed the Langmuir isotherm where the maximum sorption capacities was Pb2+>Cu2+>Cd2+>Zn2+.     

Probing the coordination properties of glutathione with transition metal ions (Cr2+,Mn2+,Fe2+,Co2+, Ni2+,Cu2+,Zn2+,Cd2+,Hg2+) by density functional theory

Complexes formed by reduced glutathione (GSH) with metal cations (Cr²⁺, Mn²⁺,Fe²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺,Cd²⁺,Hg²⁺) were systematically investigated by the density functional theory (DFT). The results showed that the interactions of the metal cations with GSH resulted in nine different stable complexes and many factors had an effect on the binding energy. Generally, for the same period of metal ions, the binding energies ranked in the order of Cu²⁺>Ni²⁺>Co²⁺>Fe²⁺>Cr²⁺>Zn²⁺>Mn²⁺; and for the same group of metal ions, the general trend of binding energies was Zn²⁺>Hg²⁺>Cd²⁺. Moreover, the amounts of charge transferred from S or N to transition metal cations are greater than that of O atoms. For Fe²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺,Cd²⁺ and Hg²⁺ complexes, the values of the Wiberg bond indices (WBIs) of M-S (M denotes metal cations) were larger than that of M-N and M-O; for Cr²⁺ complexes, most of the WBIs of M-O in complexes were higher than that of M-S and M-N. Furthermore, the changes in the electron configuration of the metal cations before and after chelate reaction revealed that Cu²⁺, Ni²⁺,Co²⁺ and Hg²⁺ had obvious tendencies to be reduced to Cu⁺,Ni⁺,Co⁺ and Hg⁺ during the coordination process.     

Cu2+、Zn2+、Cd2+对黑水虻幼虫生长的影响及在虫体和虫粪的积累

为研究不同金属离子对黑水虻幼虫生长的影响及在虫体和虫粪中的积累分布规律,通过在黑水虻幼虫饲料中加入不同浓度的Cu~(2+)、Zn~(2+)、Cd~(2+),分析观测了幼虫增重、虫体和虫粪中金属含量等情况。结果表明,适量的Cu~(2+)、Zn~(2+)、Cd~(2+)可以促进黑水虻幼虫的生长,Zn~(2+)浓度在400 mg/kg时黑水虻幼虫的体重最高。Cu~(2+)、Zn~(2+)、Cd~(2+)在黑水虻幼虫体内和虫粪中的残留随着饲料中Cu~(2+)、Zn~(2+)、Cd~(2+)浓度的升高而增加。Cu~(2+)、Zn~(2+)在虫体中的残留比例都小于50%,大部分残留在虫粪中,Cd~(2+)在10、20、40 mg/kg处理中虫体的残留比例大于50%,最高达到了91.3%,而在80、160 mg/kg处理中虫体残留量比例小于50%。各重金属在虫粪中的残留主要以残渣态存在,且各形态的含量顺序在高浓度处理中都为残渣态酸溶态水溶态碱溶态。说明饲料中适量金属离子的添加有利于黑水虻幼虫生长,但过量的添加会抑制黑水虻幼虫生长,并造成金属离子的积累。     

Removal of Cd2+, Pb2+, and Zn2+ from contaminated water using dolomite powder

Dolomite collected from Surat Thani Province in Thailand was investigated for use as a sorbent for the removal of divalent heavy metal cations from an aqueous solution. The sorbent had a surface area of 2.46 m²/g and a pH of zero point charge (pHzpc) of 9.2. Batch sorption was used to examine the effect of the pH (pH 3–7) on the sorption capacity of Cd²⁺, Pb²⁺ and Zn²⁺, alone or together as an equimolar mixture at various concentrations. Alone, each heavy metal cation was adsorbed faster at a higher pH, where the sorption of Cd²⁺ and Pb²⁺ fitted a Langmuir isotherm, but Zn²⁺ sorption best fitted a Freundlich isotherm. Under equimolar competitive sorption, the sorption capacity of each cation was decreased by 75.8% (0.29–0.07 mM/g), 82.8% (0.53–0.09 mM/g), and 95.7% (0.84–0.04 mM/g) for Cd²⁺, Pb²⁺ and Zn²⁺, respectively, compared to that with the respective single cation. Desorption of these heavy metal cations from dolomite was low, with an average desorption level of 0.06–17.4%. Furthermore, since dolomite is readily available and rather cheap, it is potentially suitable for use as an efficient sorbent to sorb Cd²⁺ and Pb²⁺, and perhaps Zn²⁺, from contaminated water.     

A molecular and biochemical analysis of the structure of the cyanogenic beta-glucosidase (linamarase) from cassava (Manihot esculenta Cranz).

The cyanogenic beta-glucosidase (linamarase) of cassava is responsible for the first step in the sequential break-down of two related cyanoglucosides. Hydrolysis of these cyanoglucosides occurs following tissue damage and leads to the production of hydrocyanic acid. This mechanism is widely regarded as a defense mechanism against predation. A linamarase cDNA clone (pCAS5) was isolated from a cotyledon cDNA library using a white clover beta-glucosidase heterologous probe. The nucleotide and derived amino acid sequence is reported and five putative N-asparagine glycosylation sites are identified. Concanavalin A affinity chromatography and endoglycosidase H digestion demonstrate that linamarase from cassava is glycosylated, having high-mannose-type N-asparagine-linked oligosaccharides. Consistent with this structure and the extracellular location of the active enzyme is the identification of an N-terminal signal peptide on the deduced amino acid sequence of pCAS5.     

Response of catalase activity to Ag+, Cd2+, Cr6+, Cu2+ and Zn2+ in five tissues of freshwater fish Oreochromis niloticus

Catalase (CAT, EC 1.11.1.6) is an important enzyme in antioxidant defense system protecting animals from oxidative stress. Freshwater fish Oreochromis niloticus were exposed for 96 h to different concentrations of Ag(+), Cd(2+), Cr(6+), Cu(2+) and Zn(2+), known to cause oxidative stress, and subsequently CAT activities in liver, kidney, gill, intestine and brain were measured. In vivo, CAT was stimulated by all metals except Ag(+) in the liver and the highest increase in CAT activity (183%) resulted from 1.0 mg Cd(2+)/L exposure, whereas 0.5 mg Ag(+)/L exposure resulted in a sharp decrease (44%). In tilapia kidney, cadmium and zinc had no significant effects on CAT activity, whereas 0.1 mg Cr(6+)/L exposure caused a decrease (44%). Cadmium and zinc did not significantly affect the CAT activity in gill; however, 0.5 mg Ag(+)/L exposure caused an increase (66%) and 1.5 mg Cr(6+)/L exposure caused a decrease (97%) in CAT activity. All metals, except Cu(2+)(41% increase), caused significant decreases in CAT activity in the intestine. In brain, 1.0 mg Zn(2+)/L resulted in an increase in CAT activity (126%), while 1.5 mg Ag(+)/L exposure caused a 54% decrease. In vitro, all metals -- except Ag(+) and Cu(2+) in kidney -- significantly inhibited the CAT activity in all tissues. Results emphasized that CAT may be considered as a sensitive bioindicator of the antioxidant defense system.     

Adsorption of Cd(II) ions from aqueous solutions using activated carbon prepared from olive stone by ZnCl2 activation

This study is aimed to remove Cd(II) ions from aqueous solutions by adsorption. As adsorbent, activated carbon prepared from olive stone, an agricultural solid by-product was used. Different activating agent (ZnCl(2)) amounts and adsorbent particle size were studied to optimize adsorbent surface area. The adsorption experiments were conducted at different parameters such as, adsorbent dose, temperature, equilibrium time and pH. According to the experiments results, the equilibrium time, optimum pH, adsorbent dosage were found 60 min, pH > 6 and 1.0 g/50 ml respectively. The kinetic data supports pseudo-second order model and intra-particle model but shows very poor fit for pseudo-first order model. Adsorption isotherms were obtained from three different temperatures. These adsorption data were fitted with the Langmuir and Freundlich isotherms. In addition, the thermodynamic parameters, standard free energy (DeltaG(0)), standard enthalpy (DeltaH(0)), standard entropy (DeltaS(0)) of the adsorption process were calculated. To reveal the adsorptive characteristics of the produced active carbon, BET surface area measurements were made. Structural analysis was performed using SEM-EDS. The resulting activated carbons with 20% ZnCl(2) solution was the best sample of the produced activated carbons from olive stone with the specific surface area of 790.25 m(2)g(-1). The results show that the produced activated carbon from olive stone is an alternative low-cost adsorbent for removing Cd(II).     

Folding pathway of apo-metallothionein induced by Zn2+, Cd2+ and Co2+.

Metal ion binding to the sulfhydryl groups of apometallothionein (apo-MT) causes both the formation of native metal-thiolate clusters and the folding of the polypeptide chain of each domain. Cd2+ and Zn2+ react with apo-MT to form metal-thiolate bonds in reactions that are complete within milliseconds and which are pH-dependent. Dual mixing experiments were conducted that involve the initial reaction of metal ion and apo-MT followed by mixing with 5,5'-N-dithio-bis(2-nitrobenzoate) or EDTA after 26 ms. They showed that structures had formed within the brief reaction period which were resistant to rapid reaction with reagents that interact with sulfhydryl groups or metal ions, respectively. It was concluded that native metallothionein domains had been constituted within this brief period. Apo-MT was also titrated with Co2+ to yield Co(n)-MT (n=1-7). Initially, Co2+ bound to independent, tetrahedral thiolate sites. Spectrophotometric analysis of the titration suggested that the independent Co(II) sites began to coalesce into clusters at n=4 (pH 7.2) or n=5 (pH 8.4). Back titration of free sulfhydryl groups (S) in Co(n)-MT (n=1-7) with iodoacetamide at pH 7.2 confirmed that clustering began at n=4. Upon conversion of these alkylated structures to the corresponding 113Cd2+ species 113Cd NMR spectroscopy established that the location of Co(II) in Co(n)-MT (n=1-3) was non-specific and that at n=4, the only observable structure was Co(II)4S11. The results suggest possible kinetic pathways of folding that are conceptually similar to those hypothesized for other small proteins.     

Inhibition kinetics of human serum butyrylcholinesterase by Cd2+, Zn2+ and Al3+: comparison of the effects of metal ions on cholinesterases

Butyrylcholinesterase (BChE, EC 3.1.1.8) has been purified about 6600-fold from human serum with a procedure including ammonium sulfate fractionation (55–70%) with acid step at pH 4.5 and procainamide–Sepharose 4B affinity chromatography. The purified enzyme exhibited negative cooperativity with respect to butyrylthiocholine (BTCh) binding at pH 7.5. K_S was found to be 0.128±0.012 mM. Inhibition kinetics of the enzyme by Cd²⁺, Zn²⁺ and Al³⁺ were studied in detail. The 1/v vs 1/[BTCh] plots in the absence (control plot) and in the presence of different concentrations of cations intersected above 1/[BTCh]-axis. The data were analyzed by means of a nonlinear curve fitting program. The results demonstrated that all of the three cations are the linear mixed-type inhibitors of BChE. Ca²⁺ and Mg²⁺ had no effect on the enzyme activity in the experimental conditions. But when the enzyme was inhibited by 0.5 mM Cd²⁺ or Zn²⁺, Ca²⁺ and Mg²⁺ partially reactivated the inhibited allosteric form of BChE. Results were compared with data obtained from brain BChE purified from sheep.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+ and Zn2+) and water coordination on the structure and properties of l-histidine and zwitterionic l-histidine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. The effect of metal ions and water on the structure of l-histidine is examined. The effect of metal ions (Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) and water on structures of His·M(H₂O)m, m = 0.1 complexes have been determined theoretically employing density functional theories using extended basis sets. Of the five stable complexes investigated the relative stability of the gas-phase complexes computed with DFT methods (with one exception of K⁺ systems) suggest metallic complexes of the neutral l-histidine to be the most stable species. The calculations of monohydrated systems show that even one water molecule has a profound effect on the relative stability of individual complexes. Proton dissociation enthalpies and Gibbs energies of l-histidine in the presence of the metal cations Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ were also computed. Its gas-phase acidity considerably increases upon chelation. Of the Lewis acids investigated, the strongest affinity to l-histidine is exhibited by the Cu²⁺ cation. The computed Gibbs energies ΔG are negative, span a rather broad energy interval (from ?130 to ?1,300 kJ/mol), and upon hydration are appreciably lowered.     

Competitive adsorption of Cu(II) and Cd(II) ions by chitosan crosslinked with epichlorohydrin-triphosphate

In this study, chitosan (CTS) was crosslinked with both epichlorohydrin (ECH) and triphosphate (TPP), by covalent and ionic crosslinking reactions, respectively. The resulting adsorbent (CTS-ECH-TPP) was characterized by SEM, CHN, EDS, FT-IR and TGA analyses, and tested for metal adsorption. The adsorbent was used in batch experiments to evaluate the adsorption of Cu(II) and Cd(II) ions in single and binary metal solutions. In single metal solutions the maximum adsorption capacities for Cu(II) and Cd(II) ions, obtained by Langmuir model, were 130.72 and 83.75 mg g?1, respectively. Adsorption isotherms for binary solutions showed that the presence of Cu(II) decreased Cd(II) adsorption due to a significant competition effect, that is, the adsorbent was selective towards Cu(II) rather than Cd(II).     

Raman spectroscopic study of the effects of Ca2+, Mg2+, Zn2+, and Cd2+ ions on calf thymus DNA: binding sites and conformational changes

The interaction of Mg2+, Ca2+, Zn2+, and Cd2+ with calf thymus DNA has been investigated by Raman spectroscopy. These spectra reveal that all of these ions, and particularly Zn2+, bind to phosphate groups of DNA, causing a slight structural change in the polynucleotide at very small metal: DNA (P) concentration ratio (ca. 1:30). This results in increased base-stacking interactions, with negligible change of the B conformation of DNA. Contrary to Zn2+ and Cd2+, which interact extensively with the nucleic bases (particularly at the N7 position of guanine), the alkaline-earth metal ions are bound almost exclusively to the phosphate groups. The affinity of both the Zn2+ and Cd2+ ions for G.C base pairs is comparable, but the Cd2+ ions interact more extensively with A.T pairs than Zn2+ ions. Interstrand cross-linking through the N3 atom of cytosine is suggested in the presence of Zn2+, but not Cd2+.     

Thermodynamics of Ni2+, Cu2+, and Zn2+ binding to the urease metallochaperone UreE

The two Ni2+ ions in the urease active site are delivered by the metallochaperone UreE, whose metal binding properties are central to the assembly of this metallocenter. Isothermal titration calorimetry (ITC) has been used to quantify the stoichiometry, affinity, and thermodynamics of Ni2+, Cu2+, and Zn2+ binding to the well-studied C-terminal truncated H144*UreE from Klebsiella aerogenes, Ni2+ binding to the wild-type K. aerogenes UreE protein, and Ni2+ and Zn2+ binding to the wild-type UreE protein from Bacillus pasteurii. The stoichiometries and affinities obtained by ITC are in good agreement with previous equilibrium dialysis results, after differences in pH and buffer competition are considered, but the concentration of H144*UreE was found to have a significant effect on metal binding stoichiometry. While two metal ions bind to the H144*UreE dimer at concentrations <10 microM, three Ni2+ or Cu2+ ions bind to 25 microM dimeric protein with ITC data indicating sequential formation of Ni/Cu(H144*UreE)4 and then (Ni/Cu)2(H144*UreE)4, or Ni/Cu(H144*UreE)2, followed by the binding of four additional metal ions per tetramer, or two per dimer. The thermodynamics indicate that the latter two metal ions bind at sites corresponding to the two binding sites observed at lower protein concentrations. Ni2+ binding to UreE from K. aerogenes is an enthalpically favored process but an entropically driven process for the B. pasteurii protein, indicating chemically different Ni2+ coordination to the two proteins. A relatively small negative value of DeltaCp is associated with Ni2+ and Cu2+ binding to H144*UreE at low protein concentrations, consistent with binding to surface sites and small changes in the protein structure.