Direct observation of poly(3-hydroxybutyrate) depolymerase adsorbed on polyester thin film by atomic force microscopy

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerases adsorbed on poly(L-lactide) (PLLA) thin film were directly observed by atomic force microscopy (AFM). A PLLA thin film of 100 nm thickness was prepared on a silicon wafer by spin-cast method. The PLLA thin film was treated at 220 degrees C and quenched to room temperature, resulting in the formation of a completely amorphous film with a smooth surface. Then, the PHB depolymerases from Pseudomonas stutzeri YM1006 and Ralstonia pickettii T1 were dispersed on the amorphous PLLA thin film. Direct AFM observation has revealed that the PHB depolymerases bind in an elliptic shape on the surface of the PLLA thin film and that a small ridge is created around each enzyme molecule. After removal of the enzymes with 40% ethanol aqueous solution, small hollows were found on the PLLA thin film. These results suggest that a PHB depolymerase interacts with polyester molecules during their adsorption to make a hollow on the substrate surface.     

A thin film nitinol heart valve

In order to create a less thrombogenic heart valve with improved longevity, a prosthetic heart valve was developed using thin film nitinol (NiTi). A "butterfly" valve was constructed using a single, elliptical piece of thin film NiTi and a scaffold made from Teflon tubing and NiTi wire. Flow tests and pressure readings across the valve were performed in vitro in a pulsatile flow loop. Bio-corrosion experiments were conducted on untreated and passivated thin film nitinol. To determine the material's in vivo biocompatibility, thin film nitinol was implanted in pigs using stents covered with thin film NiTi. Flow rates and pressure tracings across the valve were comparable to those through a commercially available 19 mm Perimount Edwards tissue valve. No signs of corrosion were present on thin film nitinol samples after immersion in Hank's solution for one month. Finally, organ and tissue samples explanted from four pigs at 2, 3, 4, and 6 weeks after thin film NiTi implantation appeared without disease, and the thin film nitinol itself was without thrombus formation. Although long term testing is still necessary, thin film NiTi may be very well suited for use in artificial heart valves.     

Ca2+- and S1-induced conformational changes of reconstituted skeletal muscle thin filaments observed by fluorescence energy transfer spectroscopy: structural evidence for three States of thin filament

Rabbit skeletal muscle alpha-tropomyosin (Tm) and the deletion mutant (D234Tm) in which internal actin-binding pseudo-repeats 2, 3, and 4 are missing [Landis et al. (1997) J. Biol. Chem. 272, 14051-14056] were used to investigate the interaction between actin and tropomyosin or actin and troponin (Tn) by means of fluorescence resonance energy transfer (FRET). FRET between Cys-190 of D234Tm and Gln-41 or Cys-374 of actin did not cause any significant Ca2+-induced movement of D234Tm, as reported previously for native Tm [Miki et al. (1998) J. Biochem. 123, 1104-1111]. FRET did not show any significant S1-induced movement of Tm and D234Tm on thin filaments either. The distances between Cys-133 of TnI, and Gln-41 and Cys-374 of actin on thin filaments reconstituted with D234Tm (mutant thin filaments) were almost the same as those on thin filaments with native Tm (wild-type thin filaments) in the absence of Ca2+. Upon binding of Ca2+ to TnC, these distances on mutant thin filaments increased by approximately 10 A in the same way as on wild-type thin filaments, which corresponds to a Ca2+-induced conformational change of thin filaments [Miki et al. (1998) J. Biochem. 123, 324-331]. The rigor binding of myosin subfragment 1 (S1) further increased these distances by approximately 7 A on both wild-type and mutant thin filaments when the thin filaments were fully decorated with S1. This indicates that a further conformational change on thin filaments was induced by S1 rigor-binding (S1-induced or open state). Plots of the extent of S1-induced conformational change vs. molar ratio of S1 to actin showed that the curve for wild-type thin filaments is hyperbolic, whereas that for mutant thin filaments is sigmoidal. This suggests that the transition to the S1-induced state on mutant thin filaments is depressed with a low population of rigor S1. In the absence of Ca2+, the distance also increased on both wild-type and mutant thin filaments close to the level in the presence of Ca2+ as the molar ratio of S1 to actin increased up to 1. The curves are sigmoidal for both wild-type and mutant thin filaments. The addition of ATP completely reversed the changes in FRET induced by rigor S1 binding. For mutant thin filaments, the transition from the closed state to the open state in the presence of ATP is strongly depressed, which results in the inhibition of acto-myosin ATPase even in the presence of Ca2+. The present FRET measurements provide structural evidence for three states of thin filaments (relaxed, Ca2+-induced or closed, and S1-induced or open states) for the regulation mechanism of skeletal muscle contraction.     

Tropomodulin is associated with the free (pointed) ends of the thin filaments in rat skeletal muscle

The length and spatial organization of thin filaments in skeletal muscle sarcomeres are precisely maintained and are essential for efficient muscle contraction. While the major structural components of skeletal muscle sarcomeres have been well characterized, the mechanisms that regulate thin filament length and spatial organization are not well understood. Tropomodulin is a new, 40.6-kD tropomyosin-binding protein from the human erythrocyte membrane skeleton that binds to one end of erythrocyte tropomyosin and blocks head-to-tail association of tropomyosin molecules along actin filaments. Here we show that rat psoas skeletal muscle contains tropomodulin based on immunoreactivity, identical apparent mobility on SDS gels, and ability to bind muscle tropomyosin. Results from immunofluorescence labeling of isolated myofibrils at resting and stretched lengths using anti-erythrocyte tropomodulin antibodies indicate that tropomodulin is localized at or near the free (pointed) ends of the thin filaments; this localization is not dependent on the presence of myosin thick filaments. Immunoblotting of supernatants and pellets obtained after extraction of myosin from myofibrils also indicates that tropomodulin remains associated with the thin filaments. 1.2-1.6 copies of muscle tropomodulin are present per thin filament in myofibrils, supporting the possibility that one or two tropomodulin molecules may be associated with the two terminal tropomyosin molecules at the pointed end of each thin filament. Although a number of proteins are associated with the barbed ends of the thin filaments at the Z disc, tropomodulin is the first protein to be specifically located at or near the pointed ends of the thin filaments. We propose that tropomodulin may cap the tropomyosin polymers at the pointed end of the thin filament and play a role in regulating thin filament length.     

Determinants of Dwell Time in Visual Search: Similarity or Perceptual Difficulty?

The present study examined the factors that determine the dwell times in a visual search task, that is, the duration the gaze remains fixated on an object. It has been suggested that an item's similarity to the search target should be an important determiner of dwell times, because dwell times are taken to reflect the time needed to reject the item as a distractor, and such discriminations are supposed to be harder the more similar an item is to the search target. In line with this similarity view, a previous study shows that, in search for a target ring of thin line-width, dwell times on thin linewidth Landolt C's distractors were longer than dwell times on Landolt C's with thick or medium linewidth. However, dwell times may have been longer on thin Landolt C's because the thin line-width made it harder to detect whether the stimuli had a gap or not. Thus, it is an open question whether dwell times on thin line-width distractors were longer because they were similar to the target or because the perceptual decision was more difficult. The present study de-coupled similarity from perceptual difficulty, by measuring dwell times on thin, medium and thick line-width distractors when the target had thin, medium or thick line-width. The results showed that dwell times were longer on target-similar than target-dissimilar stimuli across all target conditions and regardless of the line-width. It is concluded that prior findings of longer dwell times on thin linewidth-distractors can clearly be attributed to target similarity. As will be discussed towards the end, the finding of similarity effects on dwell times has important implications for current theories of visual search and eye movement control.     

Mode of caldesmon binding to smooth muscle thin filament: possible projection of the amino-terminal of caldesmon from native thin filament.

The structure of smooth muscle thin filament was examined by various electron microscopy techniques, with special attention to the mode of caldesmon binding. Chemical cross-linking was positively used to avoid the dissociation of accessory proteins upon dilution. Caldesmon in reconstituted thin filament was observed as fine filamentous projections from thin filament. Native thin filament isolated from smooth muscle showed similarly numerous fine whisker-like projections by all the techniques employed here. Antibody against the amino-terminus of caldesmon labeled the end of such projections indicating the possibility that the amino-terminal myosin binding moiety might stick out from the shaft of the thin filament. Such whiskers are often projected out as a cluster to the same side of native thin filament. Further, we could visualize the assembly of dephosphorylated heavy meromyosin (HMM) with native or reconstituted thin filament forming "nonproductive" complex in the presence of ATP. The association of HMM to the shaft of thin filament was through subfragment-2 moiety, in accordance with biochemical studies. Some HMM particles bound closer to the thin filament shaft, possibly suggesting the presence of the second myosin-binding site on caldesmon. Occasionally two kinds of HMM association as such coexisted at a single site on this filament in tandem. Thus, we constructed a structural model of thin filament. The proposed molecular arrangement is not only compatible with all the biochemical results but also provides additional support for our recent findings (E. Katayoma, G. C. Scott-Woo, and M. Ikebe (1995) J. Biol. Chem. 270, 3919-3925) regarding the capability of caldesmon to induce dephosphorylated myosin filament, which explains the existence of thick filaments in relaxed smooth muscle cells.     

Protein osmotic pressure and cross-bridge attachment determine the stiffness of thin filaments in muscle ex vivo

The properties of some models of the actin filament are compared with those of the thin filament in muscle. The greater stiffness of thin filaments ex vivo with respect to F-actin in vitro is attributed to the effect of both protein osmotic pressure and the attached cross-bridges. By comparing the stiffness of thin filaments in vitro and in isometric and rigor muscles the stiffness of thin filaments in relaxed muscle is computed. The upper limit of thin filament stretching is deduced to approach approximately 10 nm microm(-1). It is also calculated that, on stretching by 2.02 nm of the fully non-overlapped thin filament or by 1.59 nm of the thin filament on isometric contraction, the energy released on the hydrolysis of one molecule of ATP is fully used up.     

Ca(2+)- and s1-induced movement of troponin T on mutant thin filaments reconstituted with functionally deficient mutant tropomyosin

The deletion mutant (D234Tm) of rabbit skeletal muscle alpha-tropomyosin, in which internal actin-binding pseudo-repeats 2, 3, and 4 are missing, inhibits the thin filament activated myosin-ATPase activity whether Ca(2+) ion is present or not [Landis et al. (1997) J. Biol. Chem. 272, 14051-14056]. Fluorescence resonance energy transfer (FRET) showed substantial changes in distances between Cys-60 or 250 of troponin T (TnT) and Gln-41 or Cys-374 of actin on wild-type thin filaments corresponding to three states of thin filaments [Kimura et al. (2002) J. Biochem. 132, 93-102]. Troponin T movement on mutant thin filaments reconstituted with D234Tm was compared with that on wild-type thin filaments to understand from which the functional deficiency of mutant thin filaments derives. The Ca(2+)-induced changes in distances between Cys-250 of TnT and Gln-41 or Cys-374 of F-actin were smaller on mutant thin filaments than on wild-type thin filaments. On the other hand, the distances between Cys-60 of TnT and Gln-41 or Cys-374 of F-actin on mutant thin filaments did not change at all regardless of whether Ca(2+) was present. Thus, FRET showed that the Ca(2+)-induced movement of TnT was severely impaired on mutant thin filaments. The rigor binding of myosin subfragment 1 (S1) increased the distances when the thin filaments were fully decorated with S1 in the presence and absence of Ca(2+). However, plots of the extent of S1-incuced movement of TnT against molar ratio of S1 to actin in the presence and absence of Ca(2+) showed that the S1-induced movement of TnT was also impaired on mutant thin filaments. The deficiency of TnT movement on mutant thin filaments causes the altered S1-induced movement of TnI, and mutant thin filaments consequently fail to activate the myosin-ATPase activity even in the presence of Ca(2+).     

Calcium binds cooperatively to the regulatory sites of the cardiac thin filament

To investigate the relationship between thin filament Ca2+ binding and activation of the MgATPase rate of myosin subfragment 1, native cardiac thin filaments were isolated and characterized. Direct measurements of 45Ca binding to the thin filament were consistent with non-cooperative binding to two high affinity sites (Ka 7.3 +/- 0.8 x 10(6) M-1) and either cooperative or non-cooperative binding to one low affinity site (Ka 4 +/- 2 x 10(5) M-1) per troponin at 25 degrees C, 30 mM ionic strength, pH 7.06. Addition of a low concentration of myosin subfragment 1 to the native thin filaments produced a Ca2+-regulated MgATPase activity with Kapp (2.5 +/- 1.3 x 10(5) M-1), matching the low affinity Ca2+ site. The MgATPase rate was cooperatively activated by Ca2+ (Hill coefficient 1.8). To determine whether Ca2+ binding to the low affinity sites was cooperative, native thin filament troponin was exchanged with troponin labeled on troponin C with 2-(4'-iodoacetamidanilo)naphthalene-6-sulfonic acid. From the Ca2+-sensitive fluorescence of this complex, Ca2+ binding was cooperative with a Hill coefficient of 1.7-2.0. Using the troponin-exchanged thin filaments, myosin subfragment 1 MgATPase rate activation was also cooperative and closely proportional to Ca2+ thin filament binding. Reconstitution of the thin filament from its components raised the Ca2+ affinity by a factor of 2 (compared with native thin filaments) and incorporation of fluorescently modified troponin raised the Ca2+ affinity by another factor of 2. Stoichiometrically reconstituted thin filaments produced non-cooperative MgATPase rate activation, contrasting with cooperative activation with native thin filaments, troponin-exchanged thin filaments and thin filaments reconstituted with a stoichiometric excess of troponin. The Ca2+-induced fluorescence transition of stoichiometrically reconstituted thin filaments was non-cooperative. These results suggest that Ca2+ binds cooperatively to the regulatory sites of the cardiac thin filament, even in the absence of myosin, and even though cardiac troponin C has only one Ca2+-specific binding site. A theoretical model for these observations is described and related to the experimental data. Well-known interactions between neighboring troponin-tropomyosin complexes are the proposed source of cooperativity and also influence the overall Ka. The data indicate that Ca2+ is four times more likely to elongate a sequence of troponin-tropomyosin units already binding Ca2+ than to bind to a site interior to a sequence of units without Ca2+.     

Drying Dynamics of Solution‐Processed Perovskite Thin‐Film Photovoltaics: In Situ Characterization,Modeling, and Process Control

A key challenge for the commercialization of perovskite photovoltaics is the transfer of high‐quality spin coated perovskite thin‐films toward applying industry‐scale thin‐film deposition techniques, such as slot‐die coating, spray coating, screen printing, or inkjet printing. Due to the complexity of the formation of polycrystalline perovskite thin‐films from the precursor solution, efficient strategies for process transfer require advancing the understanding of the involved dynamic processes. This work investigates the fundamental interrelation between the drying dynamics of the precursor solution thin‐film and the quality of the blade coated polycrystalline perovskite thin‐films. Precisely defined drying conditions are established using a temperature‐stabilized drying channel purged with a laminar flow of dry air. The dedicated channel is equipped with laser reflectometry at multiple probing positions, allowing for in situ monitoring of the perovskite solution thin‐film thickness during the drying process. Based on the drying dynamics as measured at varying drying parameters, namely at varying temperature and laminar air flow velocity, a quantitative model on the drying of perovskite thin‐films is derived. This model enables process transfer to industry‐scale deposition systems beyond brute force optimization. Via this approach, homogeneous and pinhole‐free blade coated perovskite thin‐films are fabricated, demonstrating high power conversion efficiencies of up to 19.5% (17.3% stabilized) in perovskite solar cells.     

Carbon nanotubes-polymer-redox mediator hybrid thin film for electrocatalytic sensing

Electrocatalytic sensing of NADH using a hybrid thin film derived from multi-wall carbon nanotubes (CNTs), Nafion (Nf) polymer and electrogenerated redox mediator is described. The redox mediator was electrochemically generated by the oxidation of serotonin on the hybrid thin film modified glassy carbon electrode (GC/Nf-CNT). Controlled potential electrolysis of serotonin at 0.1 V in neutral solution results in the generation of the redox mediator 5,5'-dihydroxy-4,4'-bitryptamine (DHB) on the hybrid thin film. The electrogenerated DHB has redox active quinone-imine structure and was electrochemically characterized by studying the pH dependent redox response. DHB on the hybrid thin film exhibits reversible redox peak at -0.05 V and the formal potential shifts by -55 mV while increasing the solution pH by 1 unit. The quinone-imine structure of DHB efficiently catalyzes the oxidation of NADH with a decrease in the overpotential of about 500 mV compared to the unmodified electrode. The CNTs of the hybrid thin film facilitates the mediated electrocatalytic oxidation of NADH. The hybrid thin film modified electrode exhibits stable amperometric response and it linearly responds to NADH (0.5-400 microM). This hybrid thin film modified electrode could detect NADH as low as 0.1 microM at -0.05 V with a sensitivity of 11.1 nA/microM in physiological pH.     

凝溶蛋白对骨骼肌天然细肌丝的作用

凝溶蛋白是Ｆ－肌动蛋白丝的钙依赖性切割性蛋白质．经过焦磷酸溶液选择性抽提和微酸性介质的有效分离,可以得到纯度较高的天然细肌丝．在Ｃａ２＋存在时,凝溶蛋白可以切割天然细肌丝．但是,凝溶蛋白对天然细肌丝的作用时程与其对Ｆ－肌动蛋白丝的作用有着显著差异,提示细肌丝中的非肌动蛋白蛋白质可能影响了凝溶蛋白对天然细肌丝的结合或者切割速率．     

Application of in vitro motility assay to studying the calcium-mechanical relationship in skeletal and cardiac muscles

In a set of experiments on regulated contractile systems (i.e., in vitro motility assay with a reconstructed thin filament), the velocity of a thin filament on the surface coated with rabbit skeletal or rat cardiac myosin was estimated at various calcium ion concentrations in solution (pCa 4–8). The velocity versus pCa curve proved to be sigmoid. The velocity of a regulated thin filament at a saturating calcium concentration (pCa 4) exceeded that of a nonregulated thin filament by 65 and 87% for skeletal and cardiac myosin, respectively. The Hill coefficient was 1.95 and 2.5 for skeletal and cardiac muscles, respectively; this difference was discussed in terms of the different contributions of cooperativity mechanisms of contractile and regulatory proteins to the regulation of contraction in these types of muscle.     

Mechanism of Regulation of Native Cardiac Muscle Thin Filaments by Rigor Cardiac Myosin-S1 and Calcium

We have studied the mechanism of activation of native cardiac thin filaments by calcium and rigor myosin. The acceleration of the rate of 2′-deoxy-3′-O-(N-methylanthraniloyl)ADP (mdADP) dissociation from cardiac myosin-S1-mdADP-P_i and cardiac myosin-S1-mdADP by native cardiac muscle thin filaments was measured using double mixing stopped-flow fluorescence. Relative to inhibited thin filaments (no bound calcium or rigor S1), fully activated thin filaments (with both calcium and rigor-S1 bound) increase the rate of product dissociation from the physiologically important pre-power stroke myosin-mdADP-P_i by a factor of ∼75. This can be compared with only an ∼6-fold increase in the rate of nucleotide diphosphate dissociation from nonphysiological myosin-mdADP by the fully activated thin filaments relative to the fully inhibited thin filaments. These results show that physiological levels of regulation are not only dependent on the state of the thin filament but also on the conformation of the myosin. Less than 2-fold regulation is due to a change in affinity of myosin-ADP-P_i for thin filaments such as would be expected by a simple “steric blocking” of the myosin-binding site of the thin filament by tropomyosin. Although maximal activation requires both calcium and rigor myosin-S1 bound to the cardiac filament, association with a single ligand produces ∼70% maximal activation. This can be contrasted with skeletal thin filaments in which calcium alone only activated the rate of product dissociation ∼20% of maximum, and rigor myosin produces ∼30% maximal activation.     

Surface arrays on the cell wall of Spirillum metamorphum.

A complex and easily disrupted arrangement of macromolecules was present on the outer (lipopolysaccharide) membrane of the cell wall of Spirillum metamorphum. Separation of the arrays from the cell and spontaneous reassembly into regularly structured complexes usually occurred during preparation for electron microscopy. Freeze etchings, thin sections, and optical diffraction analysis of negatively stained fragments indicated that they consisted of two sets of a thin layer which was studied with 3-nm particles arranged in a loose (OL). The OSL consisted of a hexagonal arrangement of 8-nm disks and the OL of a thin layer which was studied with 3-nm particles arranged in a loose rectangular manner. The OSL of reassembled fragments displayed numerous broken delta-linkers between units and a center-to-center spacing of half the expected distance, which suggests that an interdigitation of two OSL arrays had occurred. The observations combined with freeze etchings and thin sections of whole cells suggested a possible reassembly mechanism. The normal surface arrangement of these layers on cells was thought to consist of the OL overlying one set of OSL which was loosely adherent to a thin amorphous backing layer.     

Increased ethylene and decreased phenolic compounds stimulate somatic embryo regeneration in leaf thin section cultures ofDoritaenopsis hybrid

The effects of endogenous levels of ethylene and phenolic compounds on somatic embryogenesis, medium-browning, and peroxidase activity were evaluated in thin section cultures ofDoritaenopsis. Cultures were maintained for 8 weeks with four different treatments: i) thick leaf segment culture, ii) thin leaf section culture, iii) thin leaf section culture with ventilation, or iv) thin leaf section culture after expiants were first washed. Expiants cultured in closed vessels produced a larger number of somatic embryos than those reared in the ventilated vessels. This enhanced formation confirmed the greater involvement of accumulated ethylene under non-ventilated conditions, because wound-induced tissues from thin leaf sections normally release high level of ethylene. When expiants were washed in the liquid medium and inoculated on the same solid medium, somatic embryo production was 1.7 and 18.5 times higher than in the thin section cultures and thick segment cultures, respectively. Reducing the level of phenolics in expiants at the initial stage of culturing apparently stimulated this embryo regeneration.     

An assessment of the models of thin filament of the sarcomere using small-angle X-ray data on rabbit relaxed muscle

Models of a thin filament based on various G-actin atomic structures and modes of their packing into helical structures were considered. The calculated intensities of actin layer lines were compared with the X-ray data for thin fiber bundles of a relaxed rabbit skeletal muscle. The effect of the main components of thin filament on the intensity of actin layer lines was also analyzed. The F-actin PDB 3BYH model gave the best fit to the experimental data.     

The N-terminal end of nebulin interacts with tropomodulin at the pointed ends of the thin filaments

Strict regulation of actin thin filament length is critical for the proper functioning of sarcomeres, the basic contractile units of myofibrils. It has been hypothesized that a molecular template works with actin filament capping proteins to regulate thin filament lengths. Nebulin is a giant protein ( approximately 800 kDa) in skeletal muscle that has been proposed to act as a molecular ruler to specify the thin filament lengths characteristic of different muscles. Tropomodulin (Tmod), a pointed end thin filament capping protein, has been shown to maintain the final length of the thin filaments. Immunofluorescence microscopy revealed that the N-terminal end of nebulin colocalizes with Tmod at the pointed ends of thin filaments. The three extreme N-terminal modules (M1-M2-M3) of nebulin bind specifically to Tmod as demonstrated by blot overlay, bead binding, and solid phase binding assays. These data demonstrate that the N terminus of the nebulin molecule extends to the extreme end of the thin filament and also establish a novel biochemical function for this end. Two Tmod isoforms, erythrocyte Tmod (E-Tmod), expressed in embryonic and slow skeletal muscle, and skeletal Tmod (Sk-Tmod), expressed late in fast skeletal muscle differentiation, bind on overlapping sites to recombinant N-terminal nebulin fragments. Sk-Tmod binds nebulin with higher affinity than E-Tmod does, suggesting that the Tmod/nebulin interaction exhibits isoform specificity. These data provide evidence that Tmod and nebulin may work together as a linked mechanism to control thin filament lengths in skeletal muscle.     

Preembedding labeling with biotinylated antibodies and subsequent visualization of the biotin groups exposed on thin sections

The feasibility of labeling cell membranes with biotinylated ligands and detecting the biotin groups on thin sections was investigated. Fixed retinal tissue was incubated with biotinyl- antiopsin . Half of the biotinyl-antibody labeled retinal tissue was incubated with avidin-ferritin (AvF) and embedded in Epon (preembedding reaction). The second half was embedded in glutaraldehyde cross-linked bovine serum albumin (BSA). Thin sections of this preparation were incubated with AvF to detect biotinyl-antibodies exposed by the sectioning (postembedding reaction). Biotin groups on the thin section surface could be readily visualized with AvF. Stereoscopic images demonstrated that the ferritin particles were localized only on the exposed surface of the thin section. The labeling was highly specific, with a very low background. Quantitative analysis was employed in order to determine the optimal reaction conditions for maximizing the labeling density with minimizing nonspecific binding. The possibility of using biotinylated molecules in the study of dynamic cellular events and for the subsequent intracellular localization of biotin on thin sections is suggested.     

Age-associated thin hair displays molecular,structural and mechanical characteristic changes

Hair thinning occurs during normal chronological aging in women and in men leading to an increased level of thinner hair shafts alongside original thicker shafts. However, the characteristics of age-associated thin hairs remain largely unknown. Here we analyzed these characteristics by comparing at multiscale thin and thick hairs originated from Caucasian women older than 50 years. We observed that the cortex of thick hair contains many K35(+)/K38(?) keratinocytes that decrease in number with decreasing hair diameter. Accordingly, X-ray diffraction revealed differences supporting that thin and thick hairs are different with regards to the nature of the intermediate filaments making up their cortices. In addition, we observed a direct correlation between hair ellipticity and diameter with thin hairs having an unexpected round shape compared to the elliptic shape of thick hairs. We also observed fewer cuticle layers and a reduced frequency of a medullae in thin hairs. Regarding mechanical properties, thin hairs exhibited a surprising increased rigidity, a decrease of the viscosity and a decrease of the water diffusion coefficient. Hence, aged-associated thin hairs exhibit numerous modifications likely due to changes of hair differentiation program as evidenced by the modulations in the expression of hair keratins and keratin-associated proteins and by the X-ray diffraction specters. Hence, hair thinning with age does not consist simply of the production of a smaller hair. It is rather a more profound process likely relying on the implementation of an “aged hair program” that takes place within the hair follicle.