Nucleotide sequence and physical map of kanamycin-resistant plasmid pUB110 from Staphylococcus aureus

The complete nucleotide sequence of Staphylococcus aureus plasmid pUB10 was determined. The sequence consists of 4545 b.p. and contains 64% A-T and 36% G-C pairs. pUB110 was found to contain four open reading frames, capable of coding for polypeptides having more than 80 amino acids. All the putative polypeptides are coded for by one DNA strand. The molecular weights of four putative polypeptides are (in kilodaltons): A-49.5; B-38.8; C-28.8 and D-9.5. Polypeptide C is involved in kanamycin resistance. Polypeptide B is, possibly, involved in pUB110 replication. No role has yet been established for polypeptides A and D, since deletions in their coding sequences have no detectable effect on any properties of pUB110 plasmid.     

The importance of homologous recombination in the generation of large deletions in hybrid plasmids in Amycolatopsis mediterranei

The whole nucleotide sequence of pT3.2I, the smallest plasmid of the acidophilic bacterium Thiobacillus T3.2, has been determined. pT3.2I is 15,390 bp long with a 53.7% GC content. Different regions can be defined in it: one 2569-bp putative insertion sequence similar to other insertion sequences of some Agrobacterium Ti plasmids; and a longer sequence, which occurs in two almost identical copies, differing only in a 1-bp deletion (6406 and 6405 bp). Several open reading frames and some smaller sequences were found in this duplicated region: ORFA and ORFG, encoding a putative polyol dehydrogenase and a putative RepA replication protein, respectively, an 83-bp sequence which could code for an antisense RNA, and a 36-bp region highly homologous to ori sequences of ColE2- and ColE3-related plasmids. Another putative gene, ORFH, is only present in the longer copy of this region (it is deleted in the short copy) and might encode a 90-amino-acid polypeptide which could act as a second replication protein, RepB. Based on sequence comparisons, pT3. 2I can be related to plasmids in the pColE2-CA42 incB incompatibility group.     

The use of synthetic oligonucleotides with universal templates for rapid DNA sequencing: results with staphylococcal replicon pC221.

A rapid sequencing strategy has been devised and applied to determine the complete nucleotide sequence (4555 bp) of Staphylococcus aureus plasmid pC221. The entire replicon was cloned into phage M13mp8 in both orientations to provide 'universal templates' for primed DNA synthesis from internally-sited oligonucleotide primers. The latter were synthesized by a modification of a recently described paper disc method which employs phosphotriester chemistry. Less than 4 weeks was required for the synthesis of the required primers and for the sequencing experiments. Plasmid pC221 bears a substrate-inducible chloramphenicol acetyltransferase (CAT) gene that shares much homology with its counterparts in pC194 (S. aureus) and the chromosomal cat-86 gene of Bacillus pumilus, both in coding regions and upstream sequences believed to be involved in the induction phenomenon. A second plasmid-specified protein, REP D, has an 81% identity in the REP C polypeptide that has been shown to be essential for the replication of staphylococcal plasmid pT181. The 5' flanking region of rep D shows striking similarities with its counterpart in rep C that determines copy number and incompatibility. The nucleotide sequence reveals two additional and overlapping open reading frames that may specify proteins that play roles in plasmid relaxation and transfer.     

Control of pT181 replication I. The pT181 copy control function acts by inhibiting the synthesis of a replication protein

pT181 is a fully sequenced 4.4-kb 20 copy Tcr plasmid from Staphylococcus aureus. Its replication system involves a unique unidirectional origin embedded in the coding sequence for a plasmid-determined protein, RepC, that is required for initiation. When joined to a 55 copy carrier plasmid, pE194, pT181 excludes autonomous isologous replicons by inhibiting their replication. Two types of spontaneous pT181 copy mutants have been isolated, one that eliminates sensitivity to this inhibition and another that does not. A spontaneous 180-bp deletion, delta 144, eliminates both the inhibitory activity and sensitivity to it. This deletion increases copy number by 50-fold and RepC production by at least 10-fold. It is located directly upstream from the repC coding sequence and the deletion-bearing plasmid supports the replication of inhibitor-sensitive plasmids in cells containing active inhibitor. This effect is probably due to the overproduction of RepC by the delta 144 plasmid. On the basis of these results, it is suggested that RepC synthesis is negatively controlled by an inhibitor that is encoded directly upstream from the repC coding sequence and acts as a tareget set in the same region. It is likely, therefore, that pT181 replication rate is determined by the level of RepC.     

RepC is rate limiting for pT181 plasmid replication

The effect on pT181 plasmid replication of the concentration of the plasmid-coded initiator protein, RepC, has been analyzed. In one type of experiment, plasmid replication was found to stop immediately after the addition of an inhibitory concentration of chloramphenicol (Cm) to growing cultures. Chromosomal replication showed the slow turnoff that is usual for Cm inhibition. Because plasmid replication rate is determined autogenously, no host factor can be rate limiting, suggesting that the specific factor affected is Rep C. In another type of experiment, we constructed a translational fusion between the repC coding sequence and a translationally inducible Cm-acetylase gene, cat-86, using pUB110 as the carrier replicon. The fusion plasmid showed an eightfold amplification of its own copy number and a similar amplification of a co-resident pT181 plasmid upon Cm induction. The amplified plasmids did not show autocatalytic runaway replication but rather established stable elevated copy numbers, indicating the existence of a secondary level of regulation. These results suggest that RepC is rate limiting for pT181 replication and support the hypothesis that pT181 replication is regulated at the level of RepC synthesis. The nature of the secondary regulation is unknown.     

The nucleotide sequence of Staphylococcus aureus plasmid pT48 conferring inducible macrolide-lincosamide-streptogramin B resistance and comparison with similar plasmids expressing constitutive resistance

The complete nucleotide sequence of a naturally occurring Staphylococcus aureus plasmid, pT48 (from S. aureus strain T48), has been determined. The 2475 bp plasmid confers inducible resistance to macrolide-lincosamide-streptogramin B (MLS) type antibiotics. It is similar to the constitutive MLS resistance plasmid, pNE131, from Staphylococcus epidermidis and shows homology with S. aureus plasmids pSN2 and pE194. It contains a palA structure homologous to that on S. aureus plasmid pT181. The open reading frame, ORF B, within the pSN2 homologous region has a frameshifted C-terminus, relative to pNE131, resulting in a smaller, 158 amino acid putative polypeptide. The pE194 homologous region has the ermC resistance determinant and retains the leader region, deleted in pNE131, required for inducible expression of an adenine methylase. Another naturally occurring S. aureus strain, J74, shows constitutive resistance to erythromycin and contains a small plasmid, pJ74, which is similar to pNE131 but with a different deletion in the leader sequence. The results are consistent with the translational attenuation model for ermC expression.     

Characterization and sequence analysis of a small plasmid from Bacillus thuringiensis var. kurstaki strain HD1-DIPEL

The complete nucleotide sequence of a small (2.055 kb) plasmid pHD2 from Bacillus thuringiensis var. kurstaki strain HD1-DIPEL was obtained. The sequence encoded two open reading frames (ORFs) which corresponded to polypeptides of Mr 26,447 and 9122. Comparison of the sequence with those obtained for other plasmids from Gram-positive organisms suggested that pHD2 may belong to the extensive and highly interrelated family of plasmids exhibiting replication via a ssDNA intermediate: a putative nick site was proposed on the basis of sequence homology and one ORF exhibited distant homology with the site-specific topoisomerases encoded by the pT181 family of staphylococcal plasmids, while the other ORF exhibited considerable similarity to a small polypeptide (RepA) encoded by plasmid pLS1. Constructs consisting of pHD2, pBR322, and the chloramphenicol resistance gene from pC194 were capable of stable maintenance in B. thuringiensis var. israelensis, but were subject to apparently specific deletions in the heterologous host. The same constructs could not be established in Bacillus subtilis.     

Nucleotide sequence and functional map of pE194, a plasmid that specifies inducible resistance to macrolide, lincosamide, and streptogramin type B antibodies.

pE194 is a small plasmid (isolated originally in Staphylococcus aureus) which confers erythromycin-inducible resistance to macrolide, lincosamide, and streptogramin type B (MLS) antibiotics. The nucleotide sequence of pE194 contains 3,728 base pairs (bp), corresponding to a molecular mass of 2.4 million daltons. By means of site-specific cleavage with restriction endonucleases and cloning resultant fragments, determinants of the two major biological functions of p E194, i.e., inducible MLS resistance and replication, could be localized and assigned to specific sequences in the plasmid. Restriction endonuclease TaqI cut pE194 at three sites. TaqI fragment A (1,443 bp) contained the determinant for inducible MLS resistance, whereas TaqI fragment B (1,354 bp) contained a determinant necessary for plasmid replication. Regulatory mutations resulting in constitutive expression of MLS resistance mapped in TaqI fragment A, whereas a mutation associated with elevated plasmid copy number was mapped in TaqI fragment B. Also mapping in TaqI fragment B was a plasmid replication determinant comprising two sets of inverted complementary repeat sequences, one of which spanned 124 bp and was adjacent to a second smaller set which was rich in guanine and cytosine residues. pE194 contained six open reading frames which were theoretically capable of coding for proteins with maximum molecular masses as follows (in daltons): A, 48,300; B, 29,200; C, 14,000; D, 13,900; E, 12,600; and F, 2,700. Insertion of plasmid pBR322 into the single PstI site located in frame A of pE194 resulted in a composite plasmid which could replicate in both Bacillus subtilis and Escherichia coli, suggesting that an intact polypeptide A is dispensable for both replication of pE194 and for MLS resistance. Frame B specified inducible MLS resistance, whereas frame F specified the putative peptide associated with the proposed B determinant translational attenuator. The extent to which frames C, D, and E, all contained in TaqI fragment B, were translated into polypeptide products is not known; however, a base change in frame E was found in a comparison between the high-copy-number mutant, cop-6, and the wild-type strains.     

Identification of replication and stability functions in the complete nucleotide sequence of plasmid pUH24 from the cyanobacterium Synechococcus sp. PCC 7942

The complete nucleotide sequence is presented for pUH24, the small plasmid of Synechococcus sp. PCC 7942. pUH24 consists of 7835bp and has a G+C content of 59%. The distribution of translation start and stop codons in the sequence allows 36 open reading frames that potentially encode polypeptides of 50 or more amino acids. We postulate that eight of these open reading frames are actual coding sequences. A region has been identified, by experiment, that contains two functions, designated pmaA and pmaB, involved in the segregational stability of the plasmid. The minimal region of pUH24 fully capable of supporting autonomous replication consists of a 3.6kb DNA fragment, which is almost entirely occupied by two overlapping genes most likely coding for essential replication proteins (repA and repB).     

Characterization of the gene products produced in minicells by pSM1, a derivative of R100

Summary At least ten polypeptides larger than 6 kilodaltons (K) are produced in minicells from the miniplasmid pSM1 in vivo. pSM1 (5804 bp) is a small derivative of the drug resistance plasmid R100 (ca. 90 kb) and carries the R100 essential replication region as well as some non-essential functions. Cloned restriction fragments of pSM1 and plasmids with deletions within pSM1 sequences were used to assign eight of the ten oberserved polypeptides to specific coding regions of pSM1. Two of these polypeptides were identified as RepA1 and RepA2, proteins encoded by the essential replication region of pSM1/R100. The nucleotide sequence consisting of 885 bp outside the essential replication region is presented here. This sequence contains an open reading frame,orf4, for a protein 22.9 K in size, and one of the pSM1-encoded polypeptides was identified as theorf4 gene product. Five additional polypeptides were shown to be the products of other open reading frames mapping outside the essential replication region. Specific functions have been assigned to four of these polypeptides and tentatively to the fifth.     

An enhancer of DNA replication.

cmp, a nucleotide sequence element in the plasmid pT181 of Staphylococcus aureus, acts as an enhancer of DNA replication. When cmp is present on an unrelated vector along with the pT181 origin of replication, it increases the ability of the linked pT181 origin to compete with a coresident pT181 plasmid for the initiator protein RepC. cmp is contained within a 156-base-pair segment, and its deletion from pT181 reduces by twofold the frequency of plasmid replication under derepressed conditions. The enhancer sequence contains a locus of DNA bending, and enhancer activity decreases with distance from the replication origin.     

Detection of an integrated tetracycline resistance plasmid in the chromosome of methicillin-resistant Staphylococcus aureus

The majority of multiresistant Staphylococcus aureus strains isolated in Australian hospitals since 1970 carry a chromosomally-encoded minocycline and tetracycline resistance determinant. By using DNA-DNA hybridization, some of these multiresistant strains were shown to possess also a tetracycline resistance plasmid, equivalent to pT181, integrated into a unique site in the chromosome. By relating the hybridization data to the map of pT181, the site of integration on this plasmid was established to be between the genes for replication and tetracycline resistance.     

Purification of pT181-encoded repC protein required for the initiation of plasmid replication

The plasmid pT181 of Staphylococcus aureus consists of 4437 base pairs and encodes resistance to tetracycline. Initiation of pT181 replication specifically requires the plasmid-encoded repC protein. An in vitro system has been shown to carry out semiconservative replication of pT181 and its derivative plasmids (Khan, S A., Carleton, S. M., and Novick, R. P. (1981) Proc. Natl. Acad. Sci. U. S. A. 78, 4902-4906). We have used this replication assay to isolate repC protein, which was purified to near homogeneity. The repC gene was cloned into the pKJB825 plasmid that contains the phage lambda temperature-sensitive repressor gene, cI857, and the rightward promoter, PR. Upon temperature induction, Escherichia coli clones containing the recombinant plasmid overproduced repC protein, which was purified in significant quantities. The molecular weight of repC protein under denaturing conditions is 38,000, which is consistent with the size predicted from the DNA sequence data. Presence of repC protein was absolutely essential for the initiation of replication of pT181 and its derivatives in vitro.     

Complete nucleotide sequence of pTZ12, a chloramphenicol-resistance plasmid of Bacillus subtilis

The complete nucleotide sequence of pTZ12, a chloramphenicol-resistance (CmR) plasmid (2517 bp) derived from Corynebacterium xerosis plasmid pTZ10, has been determined after propagation in Bacillus subtilis. The nucleotide sequence of pTZ12 suggests that a recombination event may have occurred naturally within the open reading frames for the Rep protein of pT181 (or a pT181-like plasmid) and pC221 (or a pC221-like plasmid).     

Effect of the deletion of a fragment dispensable for the autonomous maintenance of plasmid pT181 on the competition between incompatible plasmids

The deletion of the 560-bp HindIII C fragment from pT181 derivatives does not change the stability or copy number of the plasmid but affects its ability to compete with undeleted, incompatible plasmids for maintenance in the host cell. The disadvantage of the deleted plasmids seems to be manifested at the level of replication. It results that for plasmid pT181 a sequence dispensable for autonomous maintenance and replication control could affect the outcome of the competition between autonomous, incompatible plasmids.     

Sequence analysis of a cryptic plasmid from Flavobacterium sp. KP1, a psychrophilic bacterium

A cryptic plasmid found at high copy number was isolated from Flavobacterium sp. KP1, a psychrophilic Gram-negative bacterium, cloned, and sequenced. The sequence will appear in the DDBJ/EMBL/GenBank databases under the accession number AB007196. The pFL1 plasmid is 2311 nucleotides in length with 32.7% GC content, and shows a distinctive nucleotide sequence without homology to other plasmids of similar length. The plasmid contains two open reading frames of significant length, ORFI and ORFII. ORFI encodes a protein similar to the replication proteins found in Gram-negative bacterial plasmids, Bacteroides fragilis plasmid pBI143 and Zymomonas mobilis plasmid pZM2. The putative translation product of ORFII shows homologies with plasmid recombination proteins found mainly in Gram-positive bacterial plasmids such as Staphylococcus aureus plasmid pT181.     

Specificity of RepC protein in plasmid pT181 DNA replication

The plasmid pT181 of Staphylococcus aureus consists of 4437 base pairs and encodes resistance to tetracycline. Initiation of pT181 DNA replication specifically requires the plasmid-encoded initiator protein, RepC. The initiator protein binds specifically to a 32-base pair sequence within the pT181 origin of replication. RepC protein also has a nicking-closing activity that is specific for the pT181 origin. Replication of pT181 initiates by covalent extension of the nick and proceeds by a rolling circle mechanism. Two other small, multicopy plasmids pC221 and pS194 belong to the pT181 family and have common structural organization and replication properties. The replication proteins and replication origins of these plasmids have extensive sequence homologies, although they belong to different incompatibility groups. In spite of this homology, the replication proteins and replication origins of these three plasmids do not show any cross-reactivity in vivo. We have carried out a series of in vitro experiments to determine the specificity of pT181-encoded initiator protein, RepC. DNA binding experiments showed that although the binding of RepC to the pT181 origin was very efficient, little or no binding was seen with pC221 and pS194 origins. The nicking-closing activity of RepC was found to be equally efficient with the pC221 and pS194 plasmids. The plasmids pC221 and pS194 replicated efficiently in a RepC-dependent in vitro system. However, replication of these plasmids was greatly reduced in the presence of a competing pT181 origin. The results presented here suggest that nicking-closing by RepC at the origin is not sufficient for maximal replication and that tight binding of RepC to the origin plays an important role in the initiation of DNA replication.     

Plasmid pGA1 from Corynebacterium glutamicum codes for a gene product that positively influences plasmid copy number.

The complete nucleotide sequence (4,826 bp) of the cryptic plasmid pGA1 from Corynebacterium glutamicum was determined. DNA sequence analysis revealed four putative coding regions (open reading frame A [ORFA], ORFA2, ORFB, and ORFC). ORFC was identified as a rep gene coding for an initiator of plasmid replication (Rep) according to the high level of homology of its deduced amino acid sequence with the Rep proteins of plasmids pSR1 (from C. glutamicum) and pNG2 (from Corynebacterium diphtheriae). This function was confirmed by deletion mapping of the minimal replicon of pGA1 (1.7 kb) which contains only ORFC. Deletion derivatives of pGA1 devoid of ORFA exhibited significant decreases in the copy number in C. glutamicum cells and displayed segregational instability. Introduction of ORFA in trans into the cells harboring these deletion plasmids dramatically increased their copy number and segregational stability. The ORFA gene product thus positively influences plasmid copy number. This is the first report on such activity associated with a nonintegrating bacterial plasmid. The related plasmids pGA1, pSR1, and pNG2 lacking significant homology with any other plasmid seem to be representatives of a new group of plasmids replicating in the rolling-circle mode.