Detection of Microbial Growth on Polycyclic Aromatic Hydrocarbons in Microtiter Plates by Using the Respiration Indicator WST-1

We have developed a microtiter plate method for screening a large number of bacterial isolates for the ability to grow on different crystalline polycyclic aromatic hydrocarbons (PAHs). Growth on PAHs cannot easily be determined with standard growth assays because of the very low aqueous solubility and bioavailability of the PAHs. Our microtiter plate assay utilizes a new water-soluble respiration indicator, WST-1 {4-[3-(4-iodophenyl)-2-(4-nitrophenyl)-2H-5-tetrazolio]-1,3-benzene disulfonate}, in combination with easily degradable carbon sources. PAH-mineralizing strains were grown on PAHs in microtiter plates for 7 to 10 days. The tetrazolium dye WST-1 was added after incubation. Dehydrogenases in growing cells reduced WST-1 to a water-soluble colored formazan, and the intensity of the color was a measure of the respiration rate. Addition of easily degradable carbon to the wells along with WST-1 resulted in a 3- to 40-fold increase in the absorbance of positive wells within 90 min, which made it possible to detect growth on fluorene, phenanthrene, anthracene, fluoranthene, and pyrene. Addition of the electron transport blocker sodium azide unexpectedly decreased formazan formation. The method was adapted for most-probable-number enumeration of PAH degraders in soil.     

Development of a synchronous enzyme-reaction system for a highly sensitive enzyme immunoassay.

A synchronous enzyme-reaction system using water-soluble formazan and a non-enzymatic electron mediator was developed and applied to an enzyme immunoassay (EIA). The reaction system consists of four steps: (I) dephosphorylation of NADP(+) to produce NAD(+) by alkaline phosphatase (ALP), (II) reduction of NAD(+) to produce NADH with oxidation of ethanol to yield acetaldehyde by alcohol dehydrogenase (ADH), (III) reduction of water-soluble tetrazolium salt (WST-1) to produce formazan by NADH via 1-methoxy-5-methyl-phenazinium methyl sulfate (PMS), and (IV) re-reduction of NAD(+) to produce NADH by ADH. During each cycle, one molecule of tetrazolium is converted to one molecule of formazan. The concentration of formazan during the reaction was given by second-order polynomials of the reaction time. Kinetic studies strongly suggested that the synchronous enzyme-reaction system had the potential to detect an analyte at the attomole level in EIA. On the basis of the kinetic studies, optimal conditions for EIA incorporating the synchronous system were examined. NADP(+) was purified thoroughly to remove minor traces of NAD(+) in the preparation, and an ADH preparation contaminated with the lowest level of ALP activity was used. When the synchronous system was applied to a sandwich-type EIA for human C-reactive protein, the protein was detected with a sensitivity of 50 attomole per well of a micro-titer plate (0.1 ml) in a 1-h reaction. In addition, EIA with water-soluble formazan showed a more quantitative and sensitive result than that with insoluble formazan. These findings indicated that the (WST-1)-PMS system introduced in this study has a great potential for highly sensitive enzyme immunoassay.     

Colorimetric cell proliferation assay for microorganisms in microtiter plate using water-soluble tetrazolium salts

A colorimetric method to assay cell proliferation of microorganisms in 96-well microtiter plates using water-soluble tetrazolium salts and electron mediators was developed. Combinations of 6 kinds of water-soluble tetrazolium salts and 27 kinds of electron mediators that considered the metabolic efficiency of microorganisms and the influence with medium components were investigated. 2-Methyl-1,4-naphthoquinone (NQ) was reduced most effectively by various species of microorganisms, and a combination of WST-8 as a water-soluble tetrazolium salt with 2-methyl-1,4-NQ repressed the increase in background due to medium components. In the presence of 2-methyl-1,4-NQ, WST-8 was reduced by microbial cells to formazan, which exhibited maximum absorbance at 460 nm. The proposed tetrazolium method could be applied to measure proliferations of various microbial cells including 3 kinds of yeast, 9 kinds of Gram-positive bacteria, and 10 kinds of Gram-negative bacteria. Linear relationships between the absorbance and viable microbial cell density were obtained in all microorganisms, suggesting that the absorbance change reflected the microbial cell proliferation.     

An enzymatic colorimetric assay for glucose-6-phosphate

A specific colorimetric assay for the determination of glucose-6-phosphate (G6P) was developed. This assay is based on the oxidation of G6P in the presence of glucose-6-phosphate dehydrogenase (G6PD) and nicotinamide adenine dinucleotide phosphate (NADP⁺); the NADPH thereby generated reduces the tetrazolium salt WST-1 [2-(4-indophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H tetrazolium, monosodium salt] to water-soluble yellow-colored formazan with 1-methoxy-5-methylphenazium methylsulfate (1-mPMS) as an electron carrier. The assay is optimized for reaction buffer pH, enzyme/dye concentration, and reaction time course. The limit of detection of the assay is 0.15 μM (15 pmol/well). The usefulness of the assay is demonstrated by the accurate measurement of the G6P concentration in fetal bovine serum (FBS).     

Application of a Tetrazolium Salt with a Water-Soluble Formazan as an Indicator of Viability in Respiring Bacteria

The tetrazolium salt sodium 3′-{1-[(phenylamino)-carbonyl]-3,4-tetrazolium}-bis (4-methoxy-6-nitro)benzene-sulfonic acid hydrate (XTT) was examined for use as a colorimetric indicator of viability in respiring bacteria. XTT was reduced to an orange, water-soluble formazan product by Methylosinus trichosporium OB3b, Pseudomonas putida, Escherichia coli, and Bacillus subtilis. Formazan production was proportional to live cell biomass, and XTT was reduced by all cultures in the absence of added electron-coupling agents. XTT reduction by M. trichosporium OB3b was linear over several hours and was stimulated by the presence of an exogenous substrate (methanol). Addition of cyanide to cultures incubated under oxic conditions gave an initial 10-fold increase in XTT reduction. Viability of bacteria incubated in the absence of exogenous carbon substrates was measured as XTT reduction and compared with viability estimates from plate counts. Results obtained with the two methods were generally comparable, but the XTT assay was superior when cell recovery on plates was low. Incubation of E. coli for 7 days in the absence of exogenous carbon substrates decreased viability by 90%, whereas the corresponding decreases for cultures of M. trichosporium OB3b, P. putida, and B. subtilis were less than 40%.     

Evaluation of bacterial strategies to promote the bioavailability of polycyclic aromatic hydrocarbons

Polycyclic aromatic hydrocarbon (PAHs)-degrading bacteria may enhance the bioavailability of PAHs by excreting biosurfactants, by production of extracellular polymeric substances, or by forming biofilms. We tested these hypotheses in pure cultures of PAHs-degrading bacterial strains. Most of the strains did not substantially reduce the surface tension when grown on PAHs in liquid shaken cultures. Thus, pseudo-solubilization of PAHs in biosurfactant micelles seems not to be a general strategy for these isolates to enhance PAHs-bioavailability. Three semi-colloid Sphingomonas polysaccharides all increased the solubility of PAHs (Gellan 1.3- to 5.4-fold, Welan 1.8- to 6.0-fold and Rhamsan 2.4- to 9.0-fold). The increases were most pronounced for the more hydrophobic PAHs. The polysaccharide-sorbed PAHs were bioavailable. Mineralization rates of 9-[14C]-phenanthrene and 3-[14C]-fluoranthene by Sphingobium EPA505, were similar with and without sphingans, indicating that mass-transfer rates from PAHs crystals to the bulk liquid were unaffected by the polysaccharides. Biofilm formation on PAHs crystals may favor the diffusive mass transfer of PAHs from crystals to the bacterial cells. A majority of the PAHs-degraders tested formed biofilms in microtiter wells coated with PAHs crystals. For strains capable of growing on different PAHs; the more soluble the PAHs, the lower the percentage of cells attached. Biofilm formation on PAHs-sources was the predominant mechanism among the tested bacteria to overcome mass transfer limitations when growing on poorly soluble PAHs.     

Enzymatic microtiter plate-based nitrate detection in environmental and medical analysis

Our microtiter plate assay is based on the enzymatic reduction of nitrate by dissimilatory nitrate reductase from Pseudomonas stutzeri [EC 1.7.99.4]. Exogenous redox mediators like methyl viologen, methylene blue, and cibachron blue were applied to reduce nitrate reductase. Concentrations of 0.02-0.9 mM nitrate can be detected with +/-6% standard deviation, by using a photometric Griess reaction for the formed nitrite. Nitrate reductase is stable in the pH range 6.5-9.0 and works in the temperature range 4-76 degrees C. The assay shows no interferences with salt content up to 1 M chloride or 11 mM chlorate, and serum albumin content up to 50 mg/ml. The time demand of our two-step procedure is 20 min/100 samples. Nitrate reductase could be conserved on site of the wells of microtiter plates for at least 6 months at room temperature. The nitrate assay was applied in environmental and consumer goods analysis, and for medical diagnostics in human plasma samples.     

Micromolar colorimetric detection of 2-hydroxy ketones with the water-soluble tetrazolium WST-1

The archetypal triphenyl tetrazolium chloride (tetrazolium red) has been used in spectrophotometric microplate assays for 2-hydroxy ketones and, by extension, for the activity of enzymes including aminotransferase, transketolase, and pyruvate decarboxylase. Better sensitivity, dynamic range, and reproducibility of this method may be achieved by (i) in situ solubilization of the colored formazan with Cremophor EL and (ii) use of the newer-generation tetrazolium salts tetrazolium violet, iodonitrotetrazolium, or WST-1 (water-soluble tetrazolium). Two to 125 μM hydroxy pyruvate, dihydroxy acetone, and indole pyruvate produced by serine:pyruvate, β-alanine (ω-amino acid):pyruvate, and aromatic amino acid aminotransferase, respectively, could be detected with WST-1.     

A microtiter plate assay for protein kinase C

We report the development of a microtiter plate assay for protein kinase C. Reaction components and enzyme samples (protein kinase C purified by phosphatidylserine/cholesterol affinity or DEAE-Sephacel ion-exchange chromatography) were added to wells of a 96-well microtiter plate. The assay was started by the addition of [gamma-32P]ATP with a repeating pipet. After a 3-min incubation at 30 degrees C the wells were sampled six at a time with a 12-channel pipet and spotted onto phosphocellulose filter paper rectangles which were washed with tap water and acetone and counted for radioactivity. The microtiter plate method was more rapid than but gave results similar to those of a standard assay performed in plastic test tubes individually incubated in a 30 degrees C water bath. The microtiter plate procedure gave an intraassay (within one plate) variation of less than 9% and an interassay (between plates) variation of less than 5%. It was linear with time of incubation for 20 min and with amount of enzyme. This method can be used to expedite the assaying of column chromatography fractions for protein kinase C (and other kinase) activity.     

Production of superoxide ions by leukocytes of the American alligator (Alligator mississippiensis)

This study was conducted to characterize the production of superoxide ions by leukocytes in whole blood of the American alligator (Alligator mississippiensis). We used WST-1, a tetrazolium salt which can be reduced to a water-soluble formazan compound with high molar absorptivity at 438 nm, to probe the production of superoxide by alligator leukocytes. Incubation of alligator whole blood with WST-1 resulted in a time- and concentration-dependent increase in absorbance of the plasma at 438 nm. The reduction of WST-1 was inhibited in a concentration-dependent manner by superoxide dismutase, an enzyme that catalyzes the reduction of superoxide to peroxide, confirming that the reduction of WST-1 was due to the presence of superoxide. Treatment of whole blood with nitrotetrazolium blue (NBT) resulted in the staining of heterophils and monocytes, enforcing the idea that that the production of superoxide is due to the presence of leukocytes, and not other blood cell components. It is interesting to note that the production of superoxide by the alligator leukocytes required no external stimulation while human leukocytes must be stimulated with an immunological challenge before producing superoxide. This is the first report of the production of superoxide as an innate immune mechanism in crocodilians.     

The role of quality control in a skin bank: tissue viability determination.

New surgical procedures requiring viable skin have increased rapidly over the last few years. The cell viability assessment in allograft skin is a major step forward in burn treatment, since it is well-known that taking is correlated with grafted tissue viability. Various methods, both qualitative and quantitative, are currently used. Although qualitative assays (histomorphology, immunocytochemistry) are routinely performed in our laboratory, there arose a need to set up a standardised quantitative assay in an attempt to obtain a cut-off value so that the skin sample could be determined valid or not for grafting. Therefore, two different tetrazolium salt compounds MTT and WST-1, were compared in order to determine their efficacy in the evaluation of tissue viability. Several experimental conditions were analysed: 1- cellular cultures of keratinocytes and fibroblasts, 2- fresh skin tissue samples, 3- the same specimen tested daily for at least 2 weeks, 4- after cryopreservation and thawing. Viable cells were analysed by the cleavage of tetrazolium salts to formazan by cellular enzymes. The formazan dye produced by metabolically active cells was then quantified by measuring the absorbance of the dye solution at the appropriate wavelength. It was seen that WST-1 is easier to handle, more stable, has a wider line arrange, accelerated colour development and is more sensitive than MTT on fresh specimens and cell suspension. However, after 72 hours of storage at 4°C, most of the WST-1 tested specimens no longer gave any absorbance signal, whilst MTT specimens were seen to give a signal for more than two weeks. Moreover, after thawing WST-1 tested samples were almost negative,whilst MTT samples continued to give strong signals. In conclusion, WST-1 assay offers rapid and precise results as to the cell viability of fresh allografts and cell cultures, whilst the MTT method is much more useful in establishing viability after long conservation and cryopreservation. In our clinical experience, allografts transplanted at 72 hr post-harvesting or after cryopreservation showed a mean of take more than of 80%, demonstrating that the MTT system is more reliable for the determination of allograft viability. Studies are ongoing with larger clinical cohorts to establish the precise cut-off value for skin graft validation. This revised version was published online in July 2006 with corrections to the Cover Date.     

An automated filtration assay for protein kinase C ligands

[3H]Phorbol dibutyrate ([3H]PDBu) binding to soluble mouse brain protein kinase C (PKC) was established in a 96-well microtiter plate assay. [3H]PDBu-PKC receptor complexes were rapidly aspirated from wells, filtered, and washed onto glass fiber filter mats using an automated cell harvester. Results were compared to a modification of a previously described assay in which components were incubated in tubes, and manually delivered and washed onto filters with a manifold filtration apparatus. Both 96-well plate and tube assays gave qualitatively and quantitatively similar results since: (i) [3H]PDBu binding to PKC was phosphatidylserine (PS) dependent and calcium stimulatable; (ii) the amounts of [3H]PDBu bound by filters with each technique at receptors excess were similar, 3.2 +/- 0.3 and 3.1 +/- 0.4 pmol respectively; and (iii) the affinities of [3H]PDBu for PKC were comparable; Kd's were 1.95 +/- 0.3 and 2.2 +/- 0.55 nM, respectively. The 96-well plate assay was more accurate and rapid than the tube assay. The microtiter plate assay was adapted for use with [N,N-dimethyl-3H]N,N-dimethylstaurosporine ([3H]DMS). With [3H]PDBu and [3H]DMS as ligands, the 96-well plate method was used for the rapid discrimination of agents which bound selectively at the regulatory and/or catalytic domains of PKC.     

Measurement of hydrocarbon-degrading microbial populations by a 96-well plate most-probable-number procedure

A 96-well microtiter plate most-probable-number (MPN) procedure was developed to enumerate hydrocarbondegrading microorganisms. The performance of this method, which uses number 2 fuel oil (F2) as the selective growth substrate and reduction of iodonitrotetrazolium violet (INT) to detect positive wells, was evaluated by comparison with an established 24-well microtiter plate MPN procedure (the Sheen Screen), which uses weathered North Slope crude oil as the selective substrate and detects positive wells by emulsification or dispersion of the oil. Both procedures gave similar estimates of the hydrocarbon-degrader population densities in several oil-degrading enrichment cultures and sand samples from a variety of coastal sites. Although several oils were effective substrates for the 96-well procedure, the combination of F2 with INT was best, because the color change associated with INT reduction was more easily detected in the small wells than was disruption of the crude oil slick. The method's accuracy was evaluated by comparing hydrocarbon-degrader MPNs with heterotrophic plate counts for several pure and mixed cultures. For some organisms, it seems likely that a single cell cannot initiate sufficient growth to produce a positive result. Thus, this and other hydrocarbon-degrader MPN procedures might underestimate the hydrocarbon-degrading population, even for culturable organisms.     

A microassay-based procedure for measuring low levels of toxic organophosphorus compounds through acetylcholinesterase inhibition

Using a microtiter plate spectrophotometric system, an assay procedure was developed for the following toxic organophosphorus compounds: 1,2,2-trimethylpropyl ester of methylphosphonofluoridic acid (1, soman); ethyl N,N-dimethylphosphoramidocyanidate (3, tabun); O-ethyl S-[2-[bis(1-methylethyl)amino]ethyl]- methylphosphonothiolate (4, VX); the diethyl 4-nitrophenyl ester of phosphoric acid (5, paraoxon); and bis(1-methylethyl) phosphorofluoridate (6, DFP). The procedure, based on the Ellman assay method, uses inhibition of eel acetylcholinesterase (0.01 unit per well) to carry out the determination of inhibitor concentrations for both a standard curve and the unknown samples on a single 96-well microtiter plate. On a typical plate, samples of both unknowns and standards (a minimum of six concentrations were used per standard curve) were assayed five times per sample, with three control (uninhibited) enzyme activity points included for each sample. The time required for carrying out a single plate was approx 30 min. Sensitivity for the most potent acetylcholinesterase inhibitor tested was 0.4 nM under the conditions used for a typical assay. It should be noted, however, that no attempt was made to optimize the assay procedure for sensitivity.     

Synthesis of biotinylated glycoconjugates and their use in a novel ELISA for direct comparison of HIV-1 Gp120 recognition of GalCer and related carbohydrate analogues

As part of our program directed toward the design and synthesis of high-affinity ligands for the GalCer-binding site on the HIV cell surface glycoprotein, gp120, we required a reliable method for qualitatively assessing relative binding affinities for related analogues. Due to the hydrophilic nature of these synthetic conjugates, difficulties were encountered with typical ELISA methods, which rely upon hydrophobic interactions to anchor the ligand to a microtiter plate. Other types of assays were also problematic due to nonspecific binding of gp120. Therefore, we developed a general method for plating water-soluble ligands on microtiter plates using biotin/NeutrAvidin recognition for adhesion. A water-soluble GalCer analogue was prepared by conjugating psychosine to biotin using a novel tetraethylene glycol linker. In a similar manner, LacCer and GlcCer analogues were prepared and these conjugates were plated into microtiter wells containing NeutrAvidin. Unoccupied sites were blocked using biotin functionalized as a primary amide. Gp120 binding to galactosyl sphingosine, GalSph (19), GlcSph (22), and LacSph (23) conjugates was assessed through incubation with recombinant HRP-gp120. It was determined that LacSph has the strongest interaction with gp120. The binding affinities of GalSph and GlcSph were similar to each other and less strong than LacSph. These data contradict earlier studies where HPTLC showed that LacCer and GlcCer do not significantly bind gp120. They also contradict liposome-based assays that reported psychosine is not recognized by gp120. The extent of plating for each biotinylated molecule was quantified using HRP-biotin, allowing direct comparison of ligand plating efficiencies for the first time. Several other synthetic biotin conjugates were prepared and tested, demonstrating the feasibility of performing ELISA on water-soluble ligands.     

Colorimetric microtiter plate assay of glucose and fructose by enzyme-linked formazan production: applicability to the measurement of fructosyl transferase activity in higher plants

A rapid, enzyme-linked colorimetric assay, for the sequential determination of nanomole quantities of glucose and fructose in the same sample, has been developed for the measurement of fructosyl transferase activity in plant extracts. The assay extends the conventional dehydrogenase-linked assay for these sugars by utilizing the intermediary electron carrier, phenazine methosulfate, to couple NADP reduction to the production of a formazan dye from the tetrazolium salt, thiazolyl blue, in a form suitable for measurement using a microtiter plate reader. When the microtiter plate assay was used to measure the activities of yeast invertase and sucrose:sucrose fructosyl transferase from Lolium temulentum, results obtained were very similar to results obtained using the conventional procedure. The rapidity, small scale, and ease of execution of the method offers considerable advantages over the conventional hexose assay and is particularly suitable for screening of large numbers of small samples, exploiting both the speed of the microtiter plate reader and the facility of for microcomputer processing of data. The potential of this method for use with other enzyme systems and other metabolites is discussed.     

Effect of rhamnolipid on the aerobic removal of polyaromatic hydrocarbons (PAHs) and COD components from petrochemical wastewater

The removal efficiencies of 15 PAHs and some COD components (inert, readily degradable, slowly degradable and metabolic products) from a wastewater taken from a petrochemical industry treatment plant (İzmir, Turkey) have been determined using an aerobic completely stirred tank reactor (CSTR). Addition of rhamnolipid surfactant (15 mg l⁻¹) increased the removal efficiencies of PAHs and soluble COD from 72% and 90% to 80% and 99%, respectively. The rhamnolipid treatment caused a significant increase of 5- and 6-ring PAH degradation. The soluble COD removal efficiency was 93%, in CSTR reactors with rhamnolipid added. The inert COD removal efficiency was 60% in a CSTR reactor containing rhamnolipid. Batch tests showed that removal arising from the adsorption of the PAHs was low (between 1.88% and 4.84%) while the removal of PAHs from the petrochemical industry wastewater via volatilization varied between 0.69% and 5.92%. Low sorption capacity (K_p) values for refinery activated sludge (approximately 2.98 l g⁻¹) confirmed that bio-sorption was not an important mechanism controlling the fate of PAHs in aerobic CSTR reactors. Models proposed to simulate the PAH removal indicated that 94% of the PAHs were removed via biodegradation.     

Temperature regulation of microtiter plates for enzyme assays

To facilitate the use of microtiter plates as vessels for enzyme assays, an incubator has been designed to maintain the wells of the microtiter plates at the appropriate temperature. The temperature variation within a single well was +/- 0.02 degrees (standard error of the mean) at 25 degrees C and +/- 0.02 degrees at 37 degrees C. The temperature variation was the same for internal and peripheral wells within the plates, although the internal wells were approximately 0.14 degrees C warmer than the outer wells at 25 degrees C and 0.68 degrees C cooler at 37 degrees C. The overall uncertainty (95% confidence interval) of the well temperature in a typical plate was +/- 0.4 degrees C at 25 degrees C and +/- 0.7 degrees C at 37 degrees C. This uncertainty is realistic for routine enzyme determinations, as opposed to precise studies. The incubator was designed to allow access to the plates from above so that additions could be made during the incubation. To demonstrate the suitability of microtiter plates and the incubator for enzyme determinations, this method was used to measure the activity of myeloperoxidase and alpha-naphthylbutyryl esterase.     

Biofilm development by potentially pathogenic non-pigmented rapidly growing mycobacteria

Background  

A study to evaluate the biofilm-development ability in three different media (Middlebrook 7H9, sterile tap water and PBS-5% glucose) was performed with 19 collection strains from 15 different species on non-pigmented rapidly growing mycobacteria (NPRGM). A microtiter plate assay was developed to evaluate the percentage of covered surface of the microtiter plate wells in different days from day 1 to day 69.     

Microtiter plate assay for assessment of Listeria monocytogenes biofilm formation

Listeria monocytogenes has the ability to form biofilms on food-processing surfaces, potentially leading to food product contamination. The objective of this research was to standardize a polyvinyl chloride (PVC) microtiter plate assay to compare the ability of L. monocytogenes strains to form biofilms. A total of 31 coded L. monocytogenes strains were grown in defined medium (modified Welshimer's broth) at 32 degrees C for 20 and 40 h in PVC microtiter plate wells. Biofilm formation was indirectly assessed by staining with 1% crystal violet and measuring crystal violet absorbance, using destaining solution. Cellular growth rates and final cell densities did not correlate with biofilm formation, indicating that differences in biofilm formation under the same environmental conditions were not due to growth rate differences. The mean biofilm production of lineage I strains was significantly greater than that observed for lineage II and lineage III strains. The results from the standardized microtiter plate biofilm assay were also compared to biofilm formation on PVC and stainless steel as assayed by quantitative epifluorescence microscopy. Results showed similar trends for the microscopic and microtiter plate assays, indicating that the PVC microtiter plate assay can be used as a rapid, simple method to screen for differences in biofilm production between strains or growth conditions prior to performing labor-intensive microscopic analyses.