Biotransformation of 5‐Hydroxymethylfurfural to 2,5‐Furandicarboxylic Acid by a Syntrophic Consortium of Engineered Synechococcus elongatus and Pseudomonas putida

2,5‐furandicarboxylic acid (FDCA) is one of the top platform chemicals that can be produced from biomass feedstock. To make the cost of industrial FDCA production compatible with plastics made from fossils, the price of substrates and process complexity should be reduced. The aim of this research is to create a CO₂‐driven syntrophic consortium for the catalytic conversion of renewable biomass‐derived 5‐hydroxymethylfurfural (HMF) to FDCA. Sucrose produced from carbon fixation by the engineered Synechococcus elongatus serves as the sole carbon source for the engineered Pseudomonas putida to catalyze the reaction of HMF to FDCA. The yield of FDCA by the consortium reaches around 70% while the conversion of HMF is close to 100%. With further surface engineering to clump the two strains, the FDCA yield is elevated to almost 100% via the specific association between an Src homology 3 (SH3) domain and its ligand. The syntrophic consortium successfully demonstrates its green and cost‐effective characteristics for the conversion of CO₂ and biomass into platform chemicals.     

Streamlining of a synthetic co-culture towards an individually controllable one-pot process for polyhydroxyalkanoate production from light and CO2

Rationally designed synthetic microbial consortia carry a vast potential for biotechnological applications. The application of such a consortium in a bioprocess, however, requires tight and individual controllability of the involved microbes. Here, we present the streamlining of a co-cultivation process consisting of Synechococcus elongatus cscB and Pseudomonas putida for the production of polyhydroxyalkanoates (PHA) from light and CO₂. First, the process was improved by employing P. putida cscRABY, a strain with a higher metabolic activity towards sucrose. Next, the individual controllability of the co-culture partners was addressed by providing different nitrogen sources, each exclusively available for one strain. By this, the growth rate of the co-culture partners could be regulated individually, and defined conditions could be set. The molC/molN ratio, a key value for PHA accumulation, was estimated from the experimental data, and the necessary feeding rates to obtain a specific ratio could be predicted. This information was then implemented in the co-cultivation process, following the concept of a DBTL-cycle. In total, the streamlining of the process resulted in an increased maximal PHA titer of 393 mg/L and a PHA production rate of 42.1 mg/(L•day).     

Metabolic rewiring of synthetic pyruvate dehydrogenase bypasses for acetone production in cyanobacteria

Designing synthetic pathways for efficient CO₂ fixation and conversion is essential for sustainable chemical production. Here we have designed a synthetic acetate‐acetyl‐CoA/malonyl‐CoA (AAM) bypass to overcome an enzymatic activity of pyruvate dehydrogenase complex. This synthetic pathway utilizes acetate assimilation and carbon rearrangements using a methyl malonyl‐CoA carboxyltransferase. We demonstrated direct conversion of CO₂ into acetyl‐CoA‐derived acetone as an example in photosynthetic Synechococcus elongatus PCC 7942 by increasing the acetyl‐CoA pools. The engineered cyanobacterial strain with the AAM‐bypass produced 0.41 g/L of acetone at 0.71 m/day of molar productivity. This work clearly shows that the synthetic pyruvate dehydrogenase bypass (AAM‐bypass) is a key factor for the high‐level production of an acetyl‐CoA‐derived chemical in photosynthetic organisms.     

Integrated rational and evolutionary engineering of genome-reduced Pseudomonas putida strains promotes synthetic formate assimilation

Formate is a promising, water-soluble C1 feedstock for biotechnology that can be efficiently produced from CO₂—but formatotrophy has been engineered in only a few industrially-relevant microbial hosts. We addressed the challenge of expanding the feedstock range of bacterial hosts by adopting Pseudomonas putida as a robust platform for synthetic formate assimilation. Here, the metabolism of a genome-reduced variant of P. putida was radically rewired to establish synthetic auxotrophies that could be functionally complemented by expressing components of the reductive glycine (rGly) pathway. We adopted a modular engineering approach, dividing C1 assimilation in segments composed of both heterologous activities (sourced from Methylobacterium extorquens) and native biochemical reactions. Modular expression of rGly pathway elements enabled growth on formate as carbon source and acetate (predominantly for energy supply), and adaptive laboratory evolution of two lineages of engineered P. putida formatotrophs lead to doubling times of ca. 15 h. We likewise identified emergent metabolic features for assimilation of C1 units in these evolved P. putida populations. Taken together, our results consolidate the landscape of useful microbial platforms that can be implemented for C1-based biotechnological production towards a formate bioeconomy.     

Microbial consortia that degrade 2,4-DNT by interspecies metabolism: isolation and characterisation

Two consortia, isolated by selective enrichment from a soil sample of anitroaromatic-contaminated site, degraded 2,4-DNT as their sole nitrogensource without accumulating one or more detectable intermediates. Thoughoriginating from the same sample, the optimised consortia had no commonmembers, indicating that selective enrichment resulted in different end points.Consortium 1 and consortium 2 contained four and six bacterial speciesrespectively, but both had two members that were able to collectivelydegrade 2,4-DNT. Variovorax paradoxus VM685 (consortium 1)and Pseudomonas sp. VM908 (consortium 2) initiate the catabolismof 2,4-DNT by an oxidation step, thereby releasing nitrite and forming4-methyl-5-nitrocatechol (4M5NC). Both strains contained a gene similarto the dntAa gene encoding 2,4-DNT dioxygenase. They subsequentlymetabolised 4M5NC to 2-hydroxy-5-methylquinone (2H5MQ) and nitrite,indicative of DntB or 4M5NC monooxygenase activity. A second consortiummember, Pseudomonas marginalis VM683 (consortium 1) and P.aeruginosa VM903, Sphingomonas sp. VM904, Stenotrophomonasmaltophilia VM905 or P. viridiflava VM907 (consortium 2), was foundto be indispensable for efficient growth of the consortia on 2,4-DNT and forefficient metabolisation of the intermediates 4M5NC and 2H5MQ. Knowledgeabout the interactions in this step of the degradation pathway is rather limited.In addition, both consortia can use 2,4-DNT as sole nitrogen and carbon source.A gene similar to the dntD gene of Burkholderia sp. strain DNT that catalyses ring fission was demonstrated by DNA hybridisation in the secondmember strains. To our knowledge, this is the first time that consortia are shownto be necessary for 2,4-DNT degradation.     

Engineering of a modular and synthetic phosphoketolase pathway for photosynthetic production of acetone from CO2 in Synechococcus elongatus PCC 7942 under light and aerobic condition

Capture and conversion of CO₂ to valuable chemicals is intended to answer global challenges on environmental issues, climate change and energy security. Engineered cyanobacteria have been enabled to produce industry‐relevant chemicals from CO₂. However, the final products from cyanobacteria have often been mixed with fermented metabolites during dark fermentation. In this study, our engineering of Synechococcus elongatus PCC 7942 enabled continuous conversion of CO₂ to volatile acetone as sole product. This process occurred during lighted, aerobic culture via both ATP‐driven malonyl‐CoA synthesis pathway and heterologous phosphoketolase (PHK)‐phosphotransacetylase (Pta) pathway. Because of strong correlations between the metabolic pathways of acetate and acetone, supplying the acetyl‐CoA directly from CO₂ in the engineered strain, led to sole production of acetone (22.48 mg/L ± 1.00) without changing nutritional constraints, and without an anaerobic shift. Our engineered S. elongatus strains, designed for acetone production, could be modified to create biosolar cell factories for sustainable photosynthetic production of acetyl‐CoA‐derived biochemicals.     

Modelling the interactions between Pseudomonas putida and Escherichia coli O157:H7 in fish‐burgers: use of the lag‐exponential model and of a combined interaction index

Aims: The objective of the current study was to examine the interactions between Pseudomonas putida and Escherichia coli O157:H7 in coculture studies on fish‐burgers packed in air and under different modified atmospheres (30 : 40 : 30 O₂ : CO₂ : N₂, 5 : 95 O₂ : CO₂ and 50 : 50 O₂ : CO₂), throughout the storage at 8°C. Methods and Results: The lag‐exponential model was applied to describe the microbial growth. To give a quantitative measure of the occurring microbial interactions, two simple parameters were developed: the combined interaction index (CII) and the partial interaction index (PII). Under air, the interaction was significant (P < 0·05) only within the exponential growth phase (CII, 1·72), whereas under the modified atmospheres, the interactions were highly significant (P < 0·001) and occurred both in the exponential and in the stationary phase (CII ranged from 0·33 to 1·18). PII values for E.  coli O157:H7 were lower than those calculated for Ps. putida. Conclusions: The interactions occurring into the system affected both E. coli O157:H7 and pseudomonads subpopulations. The packaging atmosphere resulted in a key element. Significance and Impact of the Study: The article provides some useful information on the interactions occurring between E. coli O157:H7 and Ps. putida on fish‐burgers. The proposed index describes successfully the competitive growth of both micro‐organisms, giving also a quantitative measure of a qualitative phenomenon.     

Engineering alternative butanol production platforms in heterologous bacteria

Alternative microbial hosts have been engineered as biocatalysts for butanol biosynthesis. The butanol synthetic pathway of Clostridium acetobutylicum was first re-constructed in Escherichia coli to establish a baseline for comparison to other hosts. Whereas polycistronic expression of the pathway genes resulted in the production of 34 mg/L butanol, individual expression of pathway genes elevated titers to 200 mg/L. Improved titers were achieved by co-expression of Saccharomyces cerevisiae formate dehydrogenase while overexpression of E. coli glyceraldehyde 3-phosphate dehydrogenase to elevate glycolytic flux improved titers to 580 mg/L. Pseudomonas putida and Bacillus subtilis were also explored as alternative production hosts. Polycistronic expression of butanol biosynthetic genes yielded butanol titers of 120 and 24 mg/L from P. putida and B. subtilis, respectively. Production in the obligate aerobe P. putida was dependent upon expression of bcd-etfAB. These results demonstrate the potential of engineering butanol biosynthesis in a variety of heterologous microorganisms, including those cultivated aerobically.     

Microbial Transformation of Nitroaromatics in Surface Soils and Aquifer Materials

Microorganisms indigenous to surface soils and aquifer materials collected at a munitions-contaminated site transformed 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (2,4-DNT), and 2,6-dinitrotoluene (2,6-DNT) to amino-nitro intermediates within 20 to 70 days. Carbon mineralization studies with both unlabeled (TNT, 2,4-DNT, and 2,6-DNT) and radiolabeled ([¹⁴C]TNT) substrates indicated that a significant fraction of these source compounds was degraded to CO₂.     

Metabolism of 2,4-dinitrotoluene (2,4-DNT) by Alcaligenes sp. JS867 under oxygen limited conditions

Transformation of 2,4-dinitrotoluene (2,4-DNT) by Alcaligenes JS867 undervarying degrees of oxygen limitation was examined. Complete 2,4-DNT removalwas observed under oxygen excess with near stoichiometric release (83%) of nitrite.Average kinetic parameters were estimated based on a dual-Monod biokinetic modelwith 2,4-DNT and O₂ as growth limiting substrates. The negative impact of nitrite accumulation on the reaction rate was adequately described by inclusion of a noncompetitive inhibition term for NO₂ ^-. Under aerobic conditions, _max, K_sDNT, andK_iNO were 0.058(0.004) hr^-1, 3.3(±1.3) mg 2,4-DNT/L, and 1.2(±pm0.2) hr^-1, respectively. At increasing oxygen limitation, rates of 2,4-DNT disappearance and nitrite production decreased and incomplete removal of 2,4-DNT commenced. JS867 was able to use NO₂ ^- as a terminal electron acceptor whengrown on glucose or succinate under anaerobic conditions. However, during growthon 2,4-DNT and under O₂-limited conditions, JS867 did not use released nitrite as electron acceptor. The nearly constant molar ratios of DNT removed over NO₂ ^- released under various degrees of oxygen limitation suggested that oxygenolytic denitration pathways continued. No evidence of nitroreduction was obtained under the examined oligotrophic conditions. JS867 displayed a high affinity for oxygen consumption with K_SO2 value of 0.285(±0.198) mg O₂/L. Our results indicate thatunder oligotrophic conditions with 2,4-DNT as dominant carbon source, oxygen availability and nitrite accumulation may limit 2,4-DNT biomineralization, but the accumulation of reduced 2,4-DNT transformation products will be small.     

Metabolic resistance of a psychrotolerant VFA-oxidizing microbial community from an anaerobic bioreactor to changes in the cultivation temperature

A psychrotolerant microbial consortium from a low-temperature anaerobic EGSB bioreactor was grown separately on acetate, propionate, butyrate, and H₂/CO₂ at 30 and 10°C in glass flasks. In the course of the experiments, the cultivation temperature was changed at different time intervals. The initial rates of substrate utilization were higher at 30 than at 10°C. However, the microbial consortium was found to be well adapted to low temperatures; when grown at 10°C for 1.5–5 months, the rates of butyrate, propionate, and H₂/CO₂ utilization increased steadily. When grown at 30°C for 1.5–2.5 months, this consortium retained its ability to degrade VFA and H₂/CO₂ at 10°C. However, after long-term (150 days) cultivation at 10°C, its ability to utilize the substrates at 30°C decreased. In the consortium grown in the acetate-containing medium, a Methanosaeta-like methanogen was predominant; in media with propionate and butyrate, besides VFA-degrading bacteria, acetoclastic Methanosaeta-like and hydrogenotrophic Methanospirillum-like methanogenic archaea prevailed. A Methanospirillum-like strain predominated in the H₂/CO₂-containing medium. The Methanospirillum strain of this microbial community was presumably psychrotolerant. A method based on changes in the cultivation temperature is of practical interest and can be used to start up new bioreactors.     

Biodegradation of 2,4-dichlorophenol by a <Emphasis Type="Italic">Bacillus</Emphasis> consortium

As part of our effort at establishing microbial consortia of relevance for the bioremediation of xenobiotics polluted environments in Mexico, we assessed the aerobic biodegradation of 2,4-dichlorophenol (2,4-DCP) by a consortium of four Bacillus species that were isolated from a polluted soil by enrichment using a mixture of chlorophenols. The bacterial consortium effectively biodegraded 2-chlorophenol, 3-chlorophenol and 2,4-dichlorophenol at degradation rates of between 1.7 and 6.7 μmoles l⁻¹ h⁻¹. In the presence of NH₄Cl or KNO₂ as nitrogen sources_, 2,4-DCP was variously degraded. Under both conditions, cell biomass attained highest values of 350 and 450 mg l⁻¹ respectively, while the amounts of 2,4-DCP metabolized in 21 days reached peak values of 2.1 and 2.5 mM representing between 70 and 85% degradation respectively. Chloride releases during the same period were highest at 4.7 mM and 5.3 mM in the presence of the two nitrogen sources. The presence of free-chloride in the culture medium had a significant impact on the catabolism of 2,4-dichlorophenol.     

Growth of engineered Pseudomonas putida KT2440 on glucose,xylose, and arabinose: Hemicellulose hydrolysates and their major sugars as sustainable carbon sources

Lignocellulosic biomass is the most abundant bioresource on earth containing polymers mainly consisting of d ‐glucose, d ‐xylose, l ‐arabinose, and further sugars. In order to establish this alternative feedstock apart from applications in food, we engineered Pseudomonas putida KT2440 as microbial biocatalyst for the utilization of xylose and arabinose in addition to glucose as sole carbon sources. The d ‐xylose‐metabolizing strain P. putida KT2440_xylAB and l ‐arabinose‐metabolizing strain P. putida KT2440_araBAD were constructed by introducing respective operons from Escherichia coli. Surprisingly, we found out that both recombinant strains were able to grow on xylose as well as arabinose with high cell densities and growth rates comparable to glucose. In addition, the growth characteristics on various mixtures of glucose, xylose, and arabinose were investigated, which demonstrated the efficient co‐utilization of hexose and pentose sugars. Finally, the possibility of using lignocellulose hydrolysate as substrate for the two recombinant strains was verified. The recombinant P. putida KT2440 strains presented here as flexible microbial biocatalysts to convert lignocellulosic sugars will undoubtedly contribute to the economic feasibility of the production of valuable compounds derived from renewable feedstock.     

Synthetic mutualism in engineered E. coli mutant strains as functional basis for microbial production consortia

In nature, microorganisms often reside in symbiotic co-existence providing nutrition, stability, and protection for each partner by applying “division of labor.” This principle may also be used for the overproduction of targeted compounds in bioprocesses. It requires the engineering of a synthetic co-culture with distributed tasks for each partner. Thereby, the competition on precursors, redox cofactors, and energy—which occurs in a single host—is prevented. Current applications often focus on unidirectional interactions, that is, the product of partner A is used for the completion of biosynthesis by partner B. Here, we present a synthetically engineered Escherichia coli co-culture of two engineered mutant strains marked by the essential interaction of the partners which is achieved by implemented auxotrophies. The tryptophan auxotrophic strain E. coli ANT-3, only requiring small amounts of the aromatic amino acid, provides the auxotrophic anthranilate for the tryptophan producer E. coli TRP-3. The latter produces a surplus of tryptophan which is used to showcase the suitability of the co-culture to access related products in future applications. Co-culture characterization revealed that the microbial consortium is remarkably functionally stable for a broad range of inoculation ratios. The range of robust and functional interaction may even be extended by proper glucose feeding which was shown in a two-compartment bioreactor setting with filtrate exchange. This system even enables the use of the co-culture in a parallel two-level temperature setting which opens the door to access temperature sensitive products via heterologous production in E. coli in a continuous manner.     

Transgenic tobacco plants overexpressing a cold-adaptive nitroreductase gene exhibited enhanced 2,4-dinitrotoluene detoxification rate at low temperature

Abstract

Plants encounter many environmental factors such as low and high temperatures during phytoremediation processes. In this study, our aim was to produce the transgenic tobacco plants by using a newly characterized bacterial nitroreductase, Ntr, which was active at a broad range temperature in order to detoxify 2,4-dinitrotoluene (2,4-DNT) at lower temperature. The presence of Ntr and its heterologous expression was verified in T1 transgenic plants and their growing ability were determined under toxic amount of 2,4-DNT (35?µM). Fresh weight and dry weight of transgenic plants were significantly higher than wild type (WT) under toxic 2,4-DNT at 22?°C, indicating higher growth capacity of the transgenics. Transgenic plants also showed a higher tolerance than WT when exposed to 2,4-DNT at 15?°C. Moreover, transformation rate of 2,4-DNT was gradually decreased through decreasing temperatures in WT media, however, it was increased through decreasing temperatures in transgenic plant TR3-25 media and it had the highest transformation rate (54%) of 2,4-DNT at 4?°C. Correlatively, 2,4-DNT treatment at 4?°C led to a significant decrease in H₂O₂ level in transgenic plants. Thus, transgenic plants overexpressing nitroreductase might have an important advantage for phytoremediation of toxic nitroaromatic compounds in field applications at low temperatures.     

Tailoring cyanobacteria as a new platform for highly efficient synthesis of astaxanthin

With the ability to recycle CO₂ into value-added chemicals, cyanobacteria have been considered as renewable microbial cell factories. Astaxanthin, a highly valued carotenoid with potent antioxidant activity, could be beneficial to human health. Astaxanthin biosynthesis in engineered chassis has been achieved previously, but it generated a relatively low yield. Here, we successfully constructed a highly efficient astaxanthin biosynthetic pathway in cyanobacterium Synechocystis sp. PCC 6803, and achieved more than a 500-fold increase in astaxanthin production via stepwise reconstruction of the biosynthetic pathway and rational rewiring of the endogenous metabolism. The engineered strain produced up to 29.6 mg/g of astaxanthin (dry cell weight), which is the highest yield reported in the engineered chassis to date. Moreover, multi-omics analyses revealed that establishing a high astaxanthin flux may enhance photosynthesis and central metabolism in the engineered strain to compensate for the depleted pigments, which could be valuable for astaxanthin overproduction. This study presents a novel alternative for high-efficiency biosynthesis of astaxanthin directly from CO₂.     

Introduction of a Synthetic CO2-fixing Photorespiratory Bypass into a Cyanobacterium

Global photosynthetic productivity is limited by the enzymatic assimilation of CO₂ into organic carbon compounds. Ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO), the carboxylating enzyme of the Calvin-Benson cycle, poorly discriminates between CO₂ and O₂, leading to photorespiration and the loss of fixed carbon and nitrogen. With the advent of synthetic biology, it is now feasible to design, synthesize, and introduce biochemical pathways in vivo. We engineered a synthetic photorespiratory bypass based on the 3-hydroxypropionate bi-cycle into the model cyanobacterium, Synechococcus elongatus sp. PCC 7942. The heterologously expressed cycle is designed to function as both a photorespiratory bypass and an additional CO₂-fixing pathway, supplementing the Calvin-Benson cycle. We demonstrate the function of all six introduced enzymes and identify bottlenecks to be targeted in subsequent bioengineering. These results have implications for efforts to improve photosynthesis and for the “green” production of high value products of biotechnological interest.     

Engineering sucrose metabolism in Pseudomonas putida highlights the importance of porins

Using agricultural wastes as a substrate for biotechnological processes is of great interest in industrial biotechnology. A prerequisite for using these wastes is the ability of the industrially relevant microorganisms to metabolize the sugars present therein. Therefore, many metabolic engineering approaches are directed towards widening the substrate spectrum of the workhorses of industrial biotechnology like Escherichia coli, yeast or Pseudomonas putida. For instance, neither xylose or arabinose from cellulosic residues, nor sucrose, the main sugar in waste molasses, can be metabolized by most E. coli and P. putida wild types. We evaluated a new, so far uncharacterized gene cluster for sucrose metabolism from Pseudomonas protegens Pf-5 and showed that it enables P. putida to grow on sucrose as the sole carbon and energy source. Even when integrated into the genome of P. putida, the resulting strain grew on sucrose at rates similar to the rate of the wild type on glucose – making it the fastest growing, plasmid-free P. putida strain known so far using sucrose as substrate. Next, we elucidated the role of the porin, an orthologue of the sucrose porin ScrY, in the gene cluster and found that in P. putida, a porin is needed for sucrose transport across the outer membrane. Consequently, native porins were not sufficient to allow unlimited growth on sucrose. Therefore, we concluded that the outer membrane can be a considerable barrier for substrate transport, depending on strain, genotype and culture conditions, all of which should be taken into account in metabolic engineering approaches. We additionally showed the potential of the engineered P. putida strains by growing them on molasses with efficiencies twice as high as obtained with the wild-type P. putida. This can be seen as a further step towards the production of low-value chemicals and biofuels with P. putida from alternative and more affordable substrates in the future.