Ticlopidine augments luminol-dependent chemiluminescence in human neutrophils

Neutrophils contribute to the pathophysiology of various ischaemic states. Since many agents thought to be antiplatelet have also been shown to affect neutrophil function, it was of interest to examine the effect of ticlopidine (250 mg, p.o., b.i.d. for three doses), an antiplatelet agent, on fMLP (formyl-methionyl-leucyl-phenylalanine) stimulated neutrophil aggregation and luminol-dependent chemiluminescence in whole blood. Neutrophil aggregation did not significantly change from baseline values during ticlopidine administration. However, luminol-dependent chemiluminescence, an index of respiratory burst metabolism, was noted to be markedly increased during ticlopidine administration. Two hours following the final dose of ticlopidine, the chemiluminescent response (mean ± SEM, n = 5) was significantly increased from 6.27 ± 1.88 to 12.66 ± 2.19 units (p < 0.05). A return to baseline (6.68 ± 2.24 units) five days following the administration of ticlopidine was noted. It is concluded from this study that the acute oral administration of ticlopidine may affect neutrophil function as demonstrated by the significant increase in stimulated luminol-dependent chemiluminescence.     

Effect of sulphite on the oxidative metabolism of human neutrophils: Studies with lucigenin- and luminol-dependent chemiluminescence

To assess the effect of sulphite on the oxidative metabolism of human neutrophils, chemiluminescence (CL) measurements were performed using lucigenin and luminol as chemiluminigenic probes. Lucigenin-dependent CL was used for measuring superoxide anion (O) production, and luminol-dependent CL was used for determination of myeloperoxidase (MPO)-connected processes. With sulphite concentrations of 0.01 to 1 mmol/L, resting neutrophils showed an up to sixfold increase of lucigenin-dependent CL, but only a 1.9-fold increase of luminol-dependent CL. Subsequent stimulation of sulphite-treated neutrophils with phorbol myristate acetate (PMA) (soluble stimulant) or zymosan (particulate stimulant) resulted in an additional significant increase of lucigenin-dependent CL compared to stimulated control cells, whereas luminol-dependent CL increased slightly by 0.01 mmol/L sulphite and decreased then continuously. Sulphite concentrations above 1 mmol/L decreased both lucigenin- and luminol-dependent CL of resting and PMA- or zymosan-stimulated neutrophils. Lucigenin-dependent CL of sulphite-treated and subsequently stimulated neutrophils was strongly inhibited by extracellularly added superoxide dismutase, whereas luminol-dependent CL was markedly reduced by the MPO inhibitor azide. The intracellular activity of MPO in neutrophils stimulated with PMA in the presence of sulphite (2 mmol/L) was reduced by 55%. Sulphite (0.1 mmol/L) also inhibited strongly the activity of MPO in a cell-free system. These results indicate that micromolar concentrations of sulphite exert a stimulating effect on the O production of neutrophils extracellularly, but have an inhibitory effect on MPO-catalysed reactions intracellularly.     

Morpho‐functional modifications of human neutrophils induced by aqueous cigarette smoke extract: comparison with chemiluminescence activity

Cigarette smoking plays an important role as a cause of morbidity and mortality in humans, involving respiratory, cardiovascular, digestive and reproductive systems. Tobacco smoke contains a large number of molecules, some of which are proven carcinogens. Although not fully understood, polymorphonuclear leukocytes seem to play a crucial role in the mechanisms by which tobacco smoke compounds are implicated in smoke‐related diseases. In this paper the effects of an aqueous cigarette smoke extract on the expression of adhesion molecules of polymorphonuclear leukocytes together with the changes in the cell morphology have been related to the chemiluminescence activity. The results obtained show that polymorphonuclear leukocytes treated with aqueous cigarette smoke extract are significantly impaired, as suggested by the changes of chemiluminescence activity, of membrane receptors (CD18, CD62), myeloperoxidase expression and of cell morphology. Altogether the present data indicate that treated polymorphonuclear leukocytes are ineffectively activated and therefore unable to phagocytize zymosan particles. Copyright © 2010 John Wiley & Sons, Ltd.     

Different effects of exogenous horseradish peroxidase on luminol-amplified chemiluminescence induced by soluble and particulate stimuli in human neutrophils

The chemiluminescence (CL) technique with scavengers for superoxide anion (superoxide dismutase) and hydrogen peroxide (catalase) was used to characterize the generation of reactive oxygen species (ROS) inside and outside the human neutrophil after stimulation with both soluble (formyl-methionyl-leucyl-phenylalanine, FMLP) and particulate (urate crystals, zymosan, oxidized LDL) stimuli. Depending on the stimulus used, ROS generation differed in composition and absolute amounts. The ratio between extracellularly and intracellularly produced ROS ranged from 0.3 (zymosan) to 4.2 (FMLP). While enhancing substantially FMLP-stimulated CL, horseradish peroxidase inhibited CL induced by particulate stimuli by 40–80%. Furthermore, an azide-insensitive and therefore peroxidase-independent part of CL was found in FMLP-, LDL- and zymosan-stimulated cells. The results indicate that different agonists may lead through distinct chemical pathways to neutrophil luminol-amplified light generation. © 1998 John Wiley & Sons, Ltd.     

Influence of different luminols on the characteristics of the chemiluminescence reaction in human neutrophils

In search for a luminol with very high output of light, 20 different luminol samples were tested for their ability to enhance the chemiluminescence reaction in phorbol myristate acetate activated human neutrophils. We found that the majority of luminols tested (17 samples) gave almost the same light output from neutrophils, and that the major part of the activity was from an intracellular origin. Owing to the fact that three isoluminol samples were unable to monitor respiratory burst activity taking place intracellularly, a very low level of chemiluminescence was obtained with these samples. Their light output was, however, greatly increased when horseradish peroxidase or myeloperoxidase was added, showing that the light-generating reaction with isoluminol as well as with luminol is peroxidase-dependent. The fact that isoluminol could also use myeloperoxidase as amplifying peroxidase, suggests that the lack of measurable intracellular activity in the presence of isoluminol is somehow related to a limited or restricted diffusion of the molecule to intracellular sites. The isoluminol system constitutes a sensitive system for measuring release of oxygen metabolites from phagocytic cells.     

Luminol-dependent chemiluminescence in bovine eosinophils and neutrophils: Differential increase of intracellular and extracellular chemiluminescence induced by soluble stimulants

Luminol chemiluminescence was used to detect activation of the respiratory burst oxidase in bovine eosinophils and neutrophils. Extracellular and intracellular chemiluminescence were measured by supplementing the medium with horseradish peroxidase and catalase, respectively. Pure bovine eosinophils (> 90%), maximally stimulated with 1 nmol/l phorbol 12-myristate-13-acetate (PMA) showed ten times more extracellular luminol-dependent chemiluminescence (CL) than maximally stimulated pure bovine neutrophils (> 96%). Extracellular CL from eosinophils was preferably induced over intracellular CL by both PMA (27-fold difference) and platelet-activating factor (PAF) at 2 μmol/l (9-fold difference), but not by calcium ionophore A23187 (15 μmol/l). Time course information was used in the following experiments to distinguish between the mode of action of various stimulants. A progressively longer lag period was observed in eosinophil suspensions treated with decreasing doses of PMA, whereas platelet-activating factor induced a dose-dependent increase in the maximum response with no change in time to peak CL. The time course of extracellular CL was almost identical to intracellular CL for all stimulants tested, providing no evidence to suggest that extracellular CL stems from a different enzyme system than intracellular CL. Eosinophils generated most extracellular CL when stimulated with PMA, whereas neutrophils were most efficiently stimulated with A23187, which induced intracellular CL in eosinophils as well as in neutrophils. This accords with the greater tendency of neutrophils to ingest and kill microorganisms, whereas eosinophils are armed to destroy large extracellular targets.     

Determination of estradiol valerate in pharmaceutical preparations and human serum by flow injection chemiluminescence

A novel method for the detection of trace estradiol valerate (EV) in pharmaceutical preparations and human serum was developed by inhibition of luminol chemiluminescence (CL) by estradiol valerate on the zinc deuteroporphyrin (ZnDP)‐enhanced luminol‐K₃Fe(CN)₆ chemiluminescence system. Under optimized experimental conditions, CL intensity and concentration of estradiol valerate had a good linear relationship in the ranges of 8.0 × 10^‐8 to 1.0 × 10^‐5 g/mL. Detection limit (3σ) was estimated to be 3.5 × 10^‐8 g/mL. The proposed method was applied successfully for the determination of estradiol valerate in pharmaceutical preparations and human serum and recoveries were 97.0‐105.0% and 95.5‐106.0%, respectively. The possible mechanism of the CL system is discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Improvement of mimetic peroxidase activity of gold nanoclusters on the luminol chemiluminescence reaction by surface modification with ethanediamine

Peroxidase is a commonly used catalyst in luminol–H₂O₂ chemiluminescence (CL) reactions. Natural peroxidase has a sophisticated separation process, short shelf life and unstable activity, therefore it is important to develop peroxidases that have both high catalytic activity and good stability as alternatives to the natural enzyme. Gold nanoclusters (Au NCs) are an alternative peroxidase with catalytic activity in the luminol–H₂O₂ CL reaction. In the present study, ethanediamine was modified on the surface of Au NCs forming cationic Au NCs. The zeta potential of the cationic Au NCs maintained its positive charge when the pH of the solution was between 4 and 9. The cationic Au NCs showed higher catalytic activity in the luminol–H₂O₂ CL reaction than did unmodified Au NCs. A mechanism study showed that the better performance of cationic Au NCs may be attributed to the generation of ¹O₂ on the surface of cationic Au NCs and a positive surface charge, for better affinity to luminol. Cationic Au NC, acting as a peroxidase mimic, has much better stability than horseradish peroxidase over a wide range of temperatures. We believe that cationic Au NCs may be useful as an artificial peroxidase for a wide range of potential applications in CL and bioanalysis.     

Mathematical model for the luminol chemiluminescence reaction catalyzed by peroxidase

A kinetic model that accurately describes intensity vs. time reaction profiles for the chemiluminescence reaction between luminol and hydrogen peroxide, as catalyzed by horseradish perioxdase, is derived and evaluated. A set of three differential equations is derived and solved to provide intensity time information for the first 200 seconds of the reaction. The model accurately predicts intensity-time profiles when literature values are used for all but one of the reaction rate constants. Furthermore, the model predicts a nonlinear curve for plots of light intensity versus the initial hydrogen peroxide concentration. Experimental data confirm that such plots are nonlinear. Finally, a linear double-reciprocal plot is predicted by the model and the experimental data verify this relationship. (c) 1993 Wiley & Sons, Inc.     

Enhanced chemiluminescence in the peroxidase-luminol-H2O2 system: Anomalous reactivity of enhancer phenols with enzyme intermediates

Phenols which markedly enhance chemiluminescence in the horseradish peroxidase catalysed oxidation of luminol by hydrogen peroxide show anomalously high reactivity (by factors of ～10² compared with published Hammett correlations) in the reduction of the enzyme intermediates, Compound I and Compound II. The results support the hypothesis that efficient production of phenoxy radicals from phenols is a necessary criterion for chemiluminescence enhancer action.     

One‐step synthesis of cationic gold nanoclusters with high catalytic activity on luminol chemiluminescence reaction

The present study reports a one‐step synthesis method for the preparation of cationic gold nanoclusters (Au NCs). Polyethyleneimine (PEI), a positively charged hyperbranched polyamine, was selected as the capping reagent. Glutathione showed a synergistic effect on the formation of the small size of cationic Au NCs. The prepared cationic Au NCs have a size less than 2 nm and carry a positive charge in solution with pH less than 11. The cationic PEI–Au NCs‐triggered luminol chemiluminescence (CL) reactions showed slow and intense CL profiles. The maximum CL intensity can be obtained within 10 min and the CL signal maintained almost the same within 30 min. A linear increase of CL intensity was observed in the presence of an increasing concentration of cationic Au NCs ranging from 0.030 μM to 15 μM. The linear response of the cationic Au NCs in the CL reaction and the glow‐type CL profile make the proposed CL reaction have broad application prospects in the field of biological analysis and CL imaging.     

Dissolved oxygen determination by electrocatalysed chemiluminescence with in-line solid phase media

Dissolved elemental oxygen is determined in a flowing aqueous stream using glucose oxidase to catalyse the reaction between D -glucose and O₂ to produce hydrogen peroxide. The levels of the resulting H₂O₂ are detected and quantified by luminol chemiluminescence using in-line solid phase media for pH adjustment of the reagent stream and for controlled release of the luminophore. The reaction is initiated by electrochemical catalysis. By the use of excess D -glucose in the reagent flow stream, the intensity of chemiluminescence is rendered proportional only to fluctuations in the dissolved O₂ concentration. The methodology provides a means for the detection of aqueous O₂ in the range 0–10 mg/L. © 1998 John Wiley & Sons, Ltd.     

Determination of bisphenol A using a flow injection inhibitory chemiluminescence method.

A new flow injection chemiluminescence (CL) method has been developed for the determination of bisphenol A (BPA), based on the inhibitory effect of BPA on the chemiluminescence reaction between luminol and potassium hexacyanoferrate. Under optimum conditions, the decrease in CL emission intensity was linear with BPA concentration in the range 8.0 x 10(-7)-1.2 x 10(-5) mol/L, and the detection limit was 3.1 x 10(-7) mol/L. The relative standard deviation (RSD) of 11 replicate measurements was 2.6% for 2.0 x 10(-6) mol/L BPA (n = 11). The sampling frequency was calculated to be ca. 120/h. This method has been successfully used to determine the content of BPA in aqueous solution of polycarbonate materials. A brief discussion on the possible chemiluminescence reaction mechanism is presented.     

A validated silver‐nanoparticle‐enhanced chemiluminescence method for the determination of citalopram in pharmaceutical preparations and human plasma

A simple and sensitive chemiluminescence (CL) method was developed for the determination of citalopram in pharmaceutical preparations and human plasma. The method is based on the enhancement of the weak CL signal of the luminol–H₂O₂ system. It was found that the CL signal arising from the reaction between alkaline luminol and H₂O₂ was greatly increased by the addition of silver nanoparticles in the presence of citalopram. Prepared silver nanoparticles (AgNPs) were characterized by UV–visible spectroscopy and transmission electron microscopy (TEM). Various experimental parameters affecting CL intensity were studied and optimized for the determination of citalopram. Under optimized experimental conditions, CL intensity was found to be proportional to the concentration of citalopram in the range 40–2500 ng/mL, with a correlation coefficient of 0.9997. The limit of detection (LOD) and limit of quantification (LOQ) of the devised method were 3.78 and 12.62 ng/mL, respectively. Furthermore, the developed method was found to have excellent reproducibility with a relative standard deviation (RSD) of 3.65% (n = 7). Potential interference by common excipients was also studied. The method was validated statistically using recovery studies and was successfully applied to the determination of citalopram in the pure form, in pharmaceutical preparations and in spiked human plasma samples. Percentage recoveries were found to range from 97.71 to 101.99% for the pure form, from 97.84 to 102.78% for pharmaceutical preparations and from 95.65 to 100.35% for spiked human plasma. Copyright © 2013 John Wiley & Sons, Ltd.     

Enhancer effect of fluorescein on the luminol–H2O2–horseradish peroxidase chemiluminescence: energy transfer process

The chemiluminescence of the luminol–H₂O₂–horseradish peroxidase system is increased by fluorescein. Fluorescein produces an enhancement of the luminol chemiluminescence similar to that of phenolphthalein, by an energy transfer process from luminol to fluorescein. The maximum intesity and the total chemiluminescence emission (between 380 and 580 nm) of luminol with fluorescein was more than three times greater than without fluorescein; however, the emission duration was shorter. The emission spectra in the presence of fluorescein had two maxima (425 and 535 nm) and the enhancement was dependent on pH and fluorescein concentration. A mechanism is proposed to explain these effects. © 1997 John Wiley & Sons, Ltd.     

New luminol chemiluminescence reaction using diperiodatoargentate as oxidate for the determination of amikacin sulfate

A new chemiluminescence (CL) reaction between luminol and diperiodatoargentate {K₂ [Ag (H₂IO₆) (OH) ₂]} was observed in alkaline medium. The CL intensity could be greatly enhanced by amikacin sulfate. Therefore a new CL method for the determination of amikacin sulfate was built by combining with flow injection technology. A possible mechanism of the CL reaction was proposed via the investigation of the CL kinetic characteristics, the CL spectrum and the UV absorption spectra of some related substance. The concentration range of linear response was 5.1 × 10^?8 to 5.1 × 10^?6 mol L^?1 with a detection limit of 1.9 × 10^?8 mol L^?1 (3σ). The proposed method had good reproducibility with a relative standard deviation of 2.8% (n = 7) for 5.1 × 10^?7 mol L^?1 of amikacin sulfate. It was successfully applied to determine amikacin sulfate in serum. Copyright © 2009 John Wiley & Sons, Ltd.     

Nickel oxide hollow microsphere for the chemiluminescence determination of tuberculostatic drug isoniazid

In this article, nickel(II) oxide (NiO) hollow microspheres (HMSs) were fabricated and used to catalyze chemiluminescence (CL) reaction. The studied CL reaction is the luminol-oxygen reaction that was used as a sensitive analytical tool for measuring tuberculostatic drug isoniazid (IND) in pharmaceutical formulations and water samples. The CL method was established based on the suppression impact of IND on the CL reaction. The NiO HMSs were produced by a simple hydrothermal method and characterized by several spectroscopic techniques. The result of essential parameters on the analytical performance of the CL method, including concentrations of sodium hydroxide (NaOH), luminol, and NiO HMSs were investigated. At the optimum conditions, the calibration curve for IND was linear in the range of 8.00 × 10⁻⁷ to 1.00 × 10⁻⁴ mol L⁻¹ (R² = 0.99). A detection limit (3S) of 2.00 × 10⁻⁷ mol L⁻¹ was obtained for this method. The acceptable relative standard deviation (RSD) was obtained for the proposed CL method (2.63%, n = 10) for a 5.00 × 10⁻⁶ mol L⁻¹ IND solution. The mechanism of the CL reaction was also discussed.     

Revisiting flow‐chemiluminescence techniques: pharmaceutical analysis

The state of the art in flow‐chemiluminescence (flow‐CL) technique for automated pharmaceutical analysis is reviewed. Flow‐CL approaches have become powerful and promising tools for pharmaceutical screening in recent years due to their simplicity, low cost and high sensitivity. Because of these advantages, these methods have been widely used for pharmaceutical analysis in recent years. The literature reviewed covers papers of analytical interest that appeared between 2007 and mid‐2012 and have been divided into several sections based on fundamental types of CL systems employed. Furthermore, entries have been summarized alphabetically in tabular form giving details of analytical figures of merit of the methods. Copyright © 2012 John Wiley & Sons, Ltd.     

Interaction of metals with peroxidase--mediated luminol-enhanced, chemiluminescence (PLmCL).

The peroxidase-mediated luminol-enhanced chemiluminescence (PLmCL) method has been used to study the in vitro effect of contaminants such as heavy metals on the reactive oxygen species production by immunocytes. We were interested to know whether metals could directly affect peroxidase-mediated luminescence, taking horseradish peroxidase (HRP) as a model enzyme, since this could contribute to the inhibition of immunocyte LmCL. Copper inhibited PLmCL in a dose-dependent manner, while cadmium, iron, silver and lead only partly decreased the signal in the concentration range tested. In contrast, zinc enhanced the signal at high concentrations. Eventually, chromium, mercury and aluminium did not affect PLmCL. It is suggested that these effects reflect the ability of the metals to interact with the active site of the peroxidase. These results demonstrate that such interactions have to be considered when interpreting the effects of metals on immunocytes using the LmCL method.     

Time-resolved chemiluminescence study of the TiO2 photocatalytic reaction and its induced active oxygen species.

The time-resolved chemiluminescence (CL) method has been applied to study the TiO(2) photocatalytic reaction on a micros-ms timescale. The experimental set-up for time-resolved CL was improved for confirmation of the unique luminol CL induced by the photocatalytic reaction. The third harmonic light (355 nm) from an Nd:YAG laser was used for the light source of the TiO(2) photocatalytic reaction. Luminol CL induced by this reaction was detected by a photomultiplier tube (PMT) and a preamplifier was used for amplifying the CL signal. Experimental conditions affecting the photocatalytically induced CL were discussed in detail. The involvement of active oxygen species such as .OH, O(2) (.-) and H(2)O(2) in the CL was examined by adding their scavengers. It is concluded that .OH was greatly involved in the CL on a micros-ms timescale, especially in time periods <100 micros after illumination of the pulse laser. On the other hand, CL generated by O(2) (.-) began to increase after 100 micros and became dominant after 2.5 ms. A small part of the CL might be generated by H(2)O(2) on the whole micros-ms timescale. A CL reaction mechanism related with .OH and dissolved oxygen was proposed to explain the photocatalytically induced luminol CL on a micros-ms timescale, especially in periods <100 micros.