Oxidation of gallium sulfides by Thiobacillus ferrooxidans.

The bacterial oxidation of naturally occurring gallium-bearing chalcopyrite concentrate and a pure synthetic gallium (III) sulfide has been investigated at pH 1.8 and 35 degree C, using an active culture of Thiobacillus ferrooxidans. This oxidation process may proceed by direct or by indirect bacterial action. The highest dissolved gallium and copper concentrations were about 2.2 and 40.2 g/l, respectively. The order of the specific rate of oxygen uptake by T. ferrooxidans in approximately CuFES2 greater than or equal to gallium-bearing CuFeS2 greater than FeS2 greater than Cu2S greater than Cu2S greater than Ga2S3.     

Sulfide oxidation by spheroplasts of Thiobacillus ferrooxidans.

Thiobacillus ferrooxidans is an acidophilic organism important to metal leaching of low-grade ores. The aforementioned importance is related to the ability of the bacterium to oxidize reduced iron and sulfur, principally found in nature as pyrite (FeS2). The present study dealt with sulfide oxidation at low pH values and the involvement of the cell envelope in the process of the inorganic oxidations. Sulfide oxidation was noted in spheroplasts of T. ferrooxidans prepared by enzymatic and chemical treatments and partially purified by differential centrifugation. No enzyme activities were noted in membrane fractions containing enrichments of lipopolysaccharide symbolic of outer membrane material or in membrane vesicles containing (or associated with) higher levels of proteins. Results to date indicate that in an acid milieu the envelope structure containing both the outer membrane and the intact inner cytoplasmic membrane is required for sulfide oxidation.     

Molybdenum Oxidation by Thiobacillus ferrooxidans

Thiobacillus ferrooxidans AP19-3 oxidized molybdenum blue (Mo⁵⁺) enzymatically. Molybdenum oxidase in the plasma membrane of this bacterium was purified ca. 77-fold compared with molybdenum oxidase in cell extract. A purified molybdenum oxidase showed characteristic absorption maxima due to reduced-type cytochrome oxidase at 438 and 595 nm but did not show absorption peaks specific for c-type cytochrome. The optimum pH of molybdenum oxidase was 5.5. The activity of molybdenum oxidase was completely inhibited by sodium cyanide (5 mM) or carbon monoxide, and an oxidized type of cytochrome oxidase in a purified molybdenum oxidase was reduced by molybdenum blue, indicating that cytochrome oxidase in the enzyme plays a crucial role in molybdenum blue oxidation.     

A trickle bed reactor for ferrous sulphate oxidation using Thiobacillus ferrooxidans

Summary A trickle bed reactor was used to improve ferrous sulphate oxidation rate with Thiobacillus ferrooxidans immobilised in BSPs (Biomass Support Particles). A maximum iron(II) oxidation rate of 4.4 gL^–1h^–1 was observed at a dilution rate D = 0.9 h^–1. The ability of the reactor to operate under non-aseptic conditions due to the chemoautotrophy and acidophilia of the bacterium makes industrial application promising.     

Sulfide oxidation by spheroplasts of Thiobacillus ferrooxidans.

Thiobacillus ferrooxidans is an acidophilic organism important to metal leaching of low-grade ores. The aforementioned importance is related to the ability of the bacterium to oxidize reduced iron and sulfur, principally found in nature as pyrite (FeS2). The present study dealt with sulfide oxidation at low pH values and the involvement of the cell envelope in the process of the inorganic oxidations. Sulfide oxidation was noted in spheroplasts of T. ferrooxidans prepared by enzymatic and chemical treatments and partially purified by differential centrifugation. No enzyme activities were noted in membrane fractions containing enrichments of lipopolysaccharide symbolic of outer membrane material or in membrane vesicles containing (or associated with) higher levels of proteins. Results to date indicate that in an acid milieu the envelope structure containing both the outer membrane and the intact inner cytoplasmic membrane is required for sulfide oxidation.     

Stannous and cuprous ion oxidation by Thiobacillus ferrooxidans.

Oxidation of stannous chloride by Thiobacillus ferrooxidans was studied manometrically. At low stannous ion concentrations, initial oxidation rate was proportional to concentration. Optimum pH for oxidation was 2.3 optimum temperature was 37-40 degrees C. Spectrophotometry showed reduction of cytochromes in suspensions of whole cells on addition of ferrous, stannous, or cuprous salts. Cytochrome c reductase activity in cell-free extracts was assayed with ferrous, stannous, or cuprous ions as electron donors. It appears unlikely that an essential non-biological reaction, the reduction of ferric ions by stannous or cuprous ions, is involved. Growth of T. ferrooxidans was not obtained with either stannous chloride or stannous sulphate as sole energy source.     

氧化亚铁硫杆菌的形态及对Fe2+的氧化研究

在纯培养的条件下,对江西德兴铜矿酸性矿坑水中分离出的一株氧化亚铁硫杆菌(Thiobacillus ferrooxidans)的细胞形态、生长条件以及对Fe2 的氧化进行了初步研究。透射电子显微镜检查的结果表明,其成熟菌体大小均一,有较好的运动性;采用光学显微镜对微生物进行菌群观测和利用血小板计数器法对细菌计数的结果表明,在摇床转速为160r/min的条件下,T.f.菌在9K液体培养基中最适生长条件为温度30℃左右,最佳初始pH 2.0;用重铬酸钾滴定法测定铁的结果表明,在摇床转速为160r/min的条件下,pH值1.7,温度30℃时T.f.菌对Fe2 的氧化速率最大,约为0.58g/L·h。     

Combined degradation of covellite by Thiobacillus thiooxidans and Thiobacillus ferrooxidans

Summary In the presence of iron, which is always associated with natural sulphide ores, the percentages of copper dissolution in the bioleaching of covellite were 34 and 45 % when Thiobacillus thiooxidans and Thiobacillus ferrooxidans were used together and when an indirect bioleaching with attached bacteria was performed respectively. In the latter, the percentage of copper dissolution was still higher than the percentages obtained with pure cultures (36 % with a T. thiooxidans culture and 40 % with a T. ferrooxidans culture).     

Molecular genetics of Thiobacillus ferrooxidans.

Thiobacillus ferrooxidans is a gram-negative, highly acidophilic (pH 1.5 to 2.0), autotrophic bacterium that obtains its energy through the oxidation of ferrous iron or reduced inorganic sulfur compounds. It is usually dominant in the mixed bacterial populations that are used industrially for the extraction of metals such as copper and uranium from their ores. More recently, these bacterial consortia have been used for the biooxidation of refractory gold-bearing arsenopyrite ores prior to the recovery of gold by cyanidation. The commercial use of T. ferrooxidans has led to an increasing interest in the genetics and molecular biology of the bacterium. Initial investigations were aimed at determining whether the unique physiology and specialized habitat of T. ferrooxidans had been accompanied by a high degree of genetic drift from other gram-negative bacteria. Early genetic studies were comparative in nature and concerned the isolation of genes such as nifHDK, glnA, and recA, which are widespread among bacteria. From a molecular biology viewpoint, T. ferrooxidans appears to be a typical member of the proteobacteria. In most instances, cloned gene promoters and protein products have been functional in Escherichia coli. Although T. ferrooxidans has proved difficult to transform with DNA, research on indigenous plasmids and the isolation of the T. ferrooxidans merA gene have resulted in the development of a low-efficiency electroporation system for one strain of T. ferrooxidans. The most recent studies have focused on the molecular genetics of the pathways associated with nitrogen metabolism, carbon dioxide fixation, and components of the energy-producing mechanisms.     

Direct zinc sulphide bioleaching by Thiobacillus ferrooxidans and Thiobacillus thiooxidans

Summary Direct bioleaching (no iron(II) present) by Thiobacillus ferrooxidans mainly occurs on the surface of the very insoluble sulphides but is more important in solution when the sulphides are more soluble. In this case, Thiobacillus thiooxidans, normally not able to leach directly insoluble sulphides, has an effective leaching action.     

The soluble adenosine triphosphatase of Thiobacillus ferrooxidans.

Adenosine triphosphatase (ATPase) from Thiobacillus ferrooxidans was purified 55-fold. Polyacrylamide gel electrophoresis of the most purified fraction showed only one major band; histochemical analysis showed that the ATPase activity was associated with this band. The pH optimum is 9-10. The enzyme hydrolyzed ATP stoichiometrically to ADP and inorganic phosphate, the Km for this substrate being 7.75 times 10-3 M. GTP and ITP are alternate substrates, the Km values for these being 6.71 times 10-3 M and 3.12 times 10-3 M, respectively. ADP is slightly hydrolyzed. Magnesium, manganese, and calcium can serve as cofactors; Km values for these are 2.0 times 10-3 M, 9.4 times 10-4 M, and 8.0 times 10-4 M, respectively. The enzyme activity was not activated by either sodium or potassium, but a combination of the two ions were inhibitory. Azide and p-hydroxymercuribenzoate strongly inhibited the enzyme activity, whereas cyanide, dinitrophenol, and N,N'-dicyclohexylcarbodiimide (DCCD) were without effect. The enzyme was cold labile at 0 degrees-C, but was more stable at 18-24 degrees-C.     

Biosorption of Cu by Thiobacillus ferrooxidans

Current technologies for removal and recovery of both toxic and industrial interest metals usually produce wastes with high concentrations of those substances. They are an important source of environmental pollution, specially when they contain heavy metals. This is one of the most important environmental problems, and of the most difficult to solve. So far, there have been a number of studies considering the possibility of removing and recovering heavy metals from diluted solutions. These are due, principally, because of the commercial value of some metals as well as the environmental impact caused by them. The traditional methods for removing have several disadvantages when metals are present in concentrations lower than 100?mg/l. Biosorption, which uses biological materials as adsorbents, has been considered as an alternative method. In this work, several variables that affect the capacity for copper biosorption by T. ferrooxidans have been studied. Particularly, the effect of pH, chemical pretreatment, biomass concentration and temperature have been considered. Results indicate that a capacity as high as 119?mg of Cu/g of dry biomass can be obtained at a temperature of 25?°C.     

The chemolithotrophic bacterium Thiobacillus ferrooxidans

Abstract: The iron-oxidizing bacterium ThiobaciUus ferrooxidans is the most important microorganism in mineral leaching. It plays the dominant role in bioextractive processes because of its ability to oxidize both iron and reduced sulfur compounds. T. ferrooxidans is also an important microorganism in acid rock/mine drainage, a serious environmental problem. In this article, the current status of this bacterium is described with particular emphasis on the biomining industry.     

Reduction of dichromate by Thiobacillus ferrooxidans

Chromium(VI) was reduced by Thiobacillus ferrooxidans grown with elemental sulphur as the sole energy source. Chromium(VI) reduction (as high as 2000 M), was due to the presence of sulphite and thiosulphate, among others with high reducing power which was generated during the sulphur oxidation by the bacteria. Therefore, Thiobacillus ferrooxidans could be used to treat chromium(VI)-containing industrial effluents.     

Biochemical rust removal by Thiobacillus ferrooxidans

Summary Biochemical removal of rust from iron surfaces has been investigated. By immersing a rusted iron plate in the culture medium of an iron-oxidizing bacterium, Thiobacillus ferrooxidans, iron adjacent to the rust was dissolved and the rust was peeled off. Since the amount of dissolved iron per unit iron plate surface area correlated with the concentration of ferric iron in the culture medium, the formation of ferric iron is probably involved in dissolving the iron as is the case for bacterial leaching. In the present study, rust removal in a “continuous” system in which the culture medium was circulated from the fermentor to the rust removal vessel and back again to the fermentor, has also been investigated. Although growth inhibition was observed with the formation of ferric iron precipitates during the operation in this system, it was possible to prevent this precipitation by lowering the pH of the medium during the mixed cultivation of T. ferrooxidans and a sulfur-oxidizing bacterium, T. thiooxidans.     

Bacterial dissolution of pyrite by Thiobacillus ferrooxidans

The kinetics of the dissolution of pure pyrite (FeS₂) particles by Thiobacillus ferrooxidans were studied both theoretically and experimentally. Adsorption and dissolution experiments were carried out at 30 °C and pH=2, by using a batch reactor. The adsorption process of T. ferrooxidans to pyrite surface was rapid in comparison with the bacterial dissolution process. The experimental results for the adsorption equilibrium were well correlated by the Langmuir type isotherm. The growth rate of adsorbed bacteria was found to be proportional to the product of the number of adsorbed cells and the fraction of solid surface unoccupied by cells. A new kinetic model for the bacterial dissolution was presented, and shown to correlate well with the experimental data for the rate of bacterial dissolution and for the time variation in the number of cells in the liquid phase. The specific growth rate of adsorbed bacteria was also evaluated.List of Symbols f weight fraction of iron in pyrite - K _A m³/cells equilibrium constant for cell adsorption - R _A cells/d m³-mixture growth rate of bacteria adsorbed on solid surface - R _L cells/d m³-mixture growth rate of free bacteria in the liquid phase - t d time - V m³ volume of solid-liquid mixture - W kg weight of pyrite - W ₀ kg initial weight of pyrite - X _A cells/kg-solid number of adsorbed cells on solid surface - X _Am cells/kg-solid maximum adsorption capacity - X _L cells/m³-liquid number of free cells existing in the liquid phase - X _T cells/m³-mixture total number of cells - X _TO cells/m³ initial total number of cells - Y _A cells/kg-FeS₂ growth yield of adsorbed bacteria - Y _L cells/kg-Fe²⁺ growth yield of free bacteria - [Fe] _T kg/m³-liquid concentration of total iron in the liquid phase - fraction of pyrite dissolved - _V fraction of adsorption sites unoccupied by cells - _A d^–1 specific growth rate of adsorbed bacteria - _L d^–1 specific growth rate of free bacteria - volume fraction of solid particles in solid-liquid mixture     

Kinetics of Iron Oxidation by Thiobacillus ferrooxidans

A statistical relationship between the rate of ferric ion production by a strain of Thiobacillus ferrooxidans and various levels of cell concentration, Fe²⁺ concentration, Na⁺ concentration, and temperature was studied by a direct colorimetric method at 304 nm. The relationship was linear (90 to 93%), cross-product (3 to 4%), and quadratic (1 to 2%). The levels of cell concentration and Fe²⁺ concentration and their respective interactions with one another and the other factors had the most significant effects on the regression models. The solution of the quadratic response surface for optimum oxidation was a saddle point, and the predicted critical levels of temperature, cell concentration, Fe²⁺ concentration, and Na⁺ concentration ranged between −6 and 2°C, 0.43 and 0.62 mg/ml, 72 and 233 mM, and 29.6 mM, respectively.