Dentition and tooth replacement pattern in Chalcides (Squamata; Scincidae)

This study was undertaken as a prerequisite to investigations on tooth differentiation in a squamate, the Canarian scincid Chalcides. Our main goal was to determine whether the pattern of tooth replacement, known to be regular in lizards, could be helpful to predict accurately any stage of tooth development. A growth series of 20 laboratory-reared specimens, aged from 0.5 month after birth to about 6 years, was used. The dentition (functional and replacement teeth) was studied from radiographs of jaw quadrants. The number of tooth positions, the tooth number in relation to age and to seasons, and the size of the replacement teeth were recorded. In Chalcides, a single row of pleurodont functional teeth lies at the labial margin of the dentary, premaxillary, and maxillary. Whatever the age of the specimens, 16 tooth positions were recorded, on average, in each quadrant, suggesting that positions are maintained throughout life. Replacement teeth were numerous whatever the age and season, while the number of functional teeth was subject to variation. Symmetry of tooth development was evaluated by comparing teeth two by two from the opposite side in the four jaw quadrants of several specimens. Although the relative size of some replacement teeth fitted perfectly, the symmetry criterion was not reliable to predict the developmental stage of the opposite tooth, whether the pair of teeth compared was left-right or upper-lower. The best fit was found when comparing the size of successive replacement teeth from the front to the back of the jaw. Every replacement tooth that is 40-80% of its definitive size is followed, in the next position on the arcade, by a tooth that is, on average, 20% less developed. Considering teeth in alternate positions (even and odd series), each replacement tooth was a little more developed than the previous, more anterior, one (0.5-20% when the teeth are from 10-40% of their final size). The latter pattern showed that tooth replacement occurred in alternate positions from back to front, forming more or less regular rows (i.e., "Zahnreihen"). In Chalcides, the developmental stage of a replacement tooth in a position p can be accurately predicted provided the developmental stage of the replacement tooth in position p-1 or, to a lesser degree, in position p-2 is known. This finding will be particularly helpful when starting our structural and ultrastructural studies of tooth differentiation in this lizard.     

郑州汪沟遗址仰韶文化居民的牙齿磨耗及口腔健康状况

对汪沟遗址出土的174例仰韶文化居民的2816枚牙齿进行统计与分析,计算出牙齿的平均磨耗等级和前后部牙齿磨耗差别指数,统计特殊磨耗、龋齿、骨质隆起在样本中的出现率。结果显示,汪沟组牙齿平均磨耗等级为3.403262级,男性牙齿平均磨耗等级为3.63级,女性为3.61级;男女两性牙齿磨耗差异不显著(p>0.05);前后部牙齿磨耗差别指数比达到1:1;出现26例由于深覆■导致的特殊磨耗;臼齿咬合面凹坑式磨耗出现率为2.50%;龋齿患病率68.97%,龋齿率26.56%,龋均4.30;骨质隆起的出现率为5.20%,颌骨粗壮程度不显著。汪沟人群的牙齿磨耗程度总体偏轻,牙齿磨耗程度与河南下王岗组居民接近。基于以上特点,我们认为中原地区仰韶文化人群在饮食结构和用牙习惯上存在一定的共性。     

Tooth morphology and other aspects of the Teso dentition

The teeth of over 5,000 Teso schoolchildren members of a Nilo-Hamitic tribe in East Africa, were examined for morphological traits. There was a significant difference between the sexes in the number of cusps on the lower first and second molars, in the prevalence of the cusp of Carabelli, and in variability and agenesis of the upper lateral incisor. The results showed that females consistently favoured tooth reduction. There was also a tendency among those possessing extra cusps on one molar to have extra cusps or other molars. Records kept of the prevalence of the tribal custom of extracting lower central incisors indicated that this practise is rapidly dying out. On another group of teeth which had been extracted from adults common variations of root morphology were noted, together with the fissure pattern of the lower molars. Measurements were made of those teeth which were unworn and were not broken down by dental decay, and the lower third molar was found to be the largest tooth of the series. Observations on the pattern of molar tooth wear showed that the buccal as well as the occlusal surface was strongly affected.     

Making up the numbers: The molecular control of mammalian dental formula

Teeth develop in the mammalian embryo via a series of interactions between odontogenic epithelium and neural crest-derived ectomesenchyme of the early jaw primordia. The molecular interactions required to generate a tooth are mediated by families of signalling molecules, which often act reiteratively in both a temporal and spatial manner. Whilst considerable information is now available on how these molecules interact to produce an individual tooth, much less is known about the processes that control overall tooth number within the dentition. However, a number of mouse models are now starting to provide some insight into the mechanisms that achieve this. In particular, co-ordinated restriction of signalling molecule activity is important in ensuring appropriate tooth number and there are different requirements for this suppression in epithelial and mesenchymal tissues, both along different axes of individual jaws and between the jaws themselves. There are a number of fundamental mechanisms that facilitate supernumerary tooth formation in these mice. A key process appears to be the early death of vestigial tooth primordia present in the embryo, achieved through the suppression of Shh signalling within these early teeth. However, restriction of WNT signalling is also important in controlling tooth number, with increased transduction being capable of generating multiple tooth buds from the oral epithelium or existing teeth themselves, in both embryonic and adult tissues. Indeed, uncontrolled activity of this pathway can lead to the formation of odontogenic tumours containing multiple odontogenic tissues and poorly formed teeth. Finally, disrupted patterning along the buccal–lingual aspect of the jaws can produce extra teeth directly from the oral epithelium in a duplicated row. Together, all of these findings have relevance for human populations, where supernumerary teeth are seen in association with both the primary and permanent dentitions. Moreover, they are also providing insight into how successional teeth form in both embryonic and post-natal tissues of the jaws.     

A new correction procedure for calibrating dental caries frequency

The incisors and canines and the premolars and molars show differential resistance to cariogenic factors. The anterior teeth have a lower caries frequency than the posterior teeth. However, these tooth classes are lost differentially in postmortem stages due to their anatomical structures. This differential postmortem tooth loss distorts proportions between the anterior and posterior tooth classes. The disproportionality can affect the calculation of total caries prevalence. In this paper, we propose a new calibration procedure which removes this disproportionality and call it the proportional correction factor. For this procedure, the caries rates of anterior and posterior teeth are corrected by multiplying the anterior teeth by three-eighths and the posterior teeth by five-eighths. These fractions are derived from the human dental formula which contains three anterior and five posterior teeth by side. The correction factor is more effective if the proportion of anterior to the posterior teeth is extremely distorted. When this procedure is used with the caries correction factor, it provides a useful way to approach to an almost true caries prevalence. Am J Phys Anthropol 108:237–240, 1999. © 1999 Wiley-Liss, Inc.     

Prevalence and age at development of enamel hypoplasias in Mexican children

Enamel hypoplasias, deficiencies in enamel thickness resulting from disturbances during the secretory phase of enamel development, are generally believed to result from nonspecific metabolic and nutritional disruptions. However, data are scare on the prevalence and chronological distributions. of hypoplasias in populations experiencing mild to moderate malnutrition. The purpose of this article is to present baseline data on the prevalences and chronological distributions of enamel hypoplasias, by sex and for all deciduous and permanent anterior teeth, in 300 5 to 15-year-old rural Mexican children. Identification of hypoplasias was aided by comparison to a published standard (Federation Dentaire Internationale: Int. Dent. J. 32(2):159-167, 1982). The location of defects, by transverse sixths of tooth crowns, was used to construct distributions of defects by age at development. One or more hypoplasias were detected in 46.7% (95% CI = 40.9-52.5%) of children. Among the unworn and completely erupted teeth, the highest prevalence of defects was found on the permanent maxillary central incisors (44.4% with one or more hypoplasias), followed by the permanent maxillary canine (28.0%) and the remaining permanent teeth (26.2 to 22.2%) Only 6.1% of the completely erupted and unworn deciduous teeth were hypoplastic. The prevalence of enamel defects on the permanent teeth was up to tenfold greater than that found in studies of less marginal populations that used the FDI method. The prevalence of defects in transverse zones suggests a peak frequency of hypoplasias during the second and third years for the permanent teeth, corresponding to the age at weaning in this group. In the deciduous teeth, a smaller peak occurs between 30 and 40 weeks post gestation. The frequency of defects after three years of age is slightly higher in females than males, suggesting a sex difference in access to critical resources.     

The mechanics of cutting and the form of shark teeth (Chondrichthyes,Elasmobranchii)

Summary A rich engineering literature exists that is applicable to many aspects of vertebrate jaw mechanics and has been referred to in many studies in this sector. But mechanical engineering technology has provided few theoretical bases that are directly helpful in the study of predator teeth. Hence, analyses of puncturing and slicing functions of these teeth have lacked a firm physical technology as a background. Predator teeth have evolved to pierce and cut animal tissues that are usually compliant in that they readily undergo relatively large deformations under applied stress before they actually yield. The bulk of engineering theory is directed toward such noncompliant materials as wood and metal, the design of tools that cut them, and the mechanics involved in this. The purpose of the present paper is to scan the mechanical implications of different tooth designs, pose hypotheses that relate to primary considerations of the physics of cutting compliant substrates, and offer a preliminary approach that is intended as a useful guide to further studies on sharks and on other vertebrate groups. Thus, in this paper I have attempted to formulate some tentative and preliminary generalizations concerning the mechanics of cutting compliant materials. Then comes a survey of the teeth of a particular group of predators, three families of sharks, in terms of these preliminary formulations. The approach views the shark teeth in isolation from the complex cranial mechanism (presently under study) that functionally integrates with the teeth. Therefore, adaptive conclusions are minimal, because the evolutionary significance of tooth form cannot properly be assessed outside of an integrated study. However, certain correlations do exist between structural tooth characteristics and mechanics. Slender, smooth-edged (or nearly so) teeth can readily pierce prey, but are of less use in slicing it. Such teeth are typical of the lower jaw dentition in many sharks and, in a few species, they are present in both upper and lower jaws. Usually these slender teeth display a reversed curvature at their tips, so that although most of the tooth's crown is curved inward toward the mouth cavity, the tip is turned outward. This outward turning of the tip can enhance the probability of initial prey penetration, without much compromising the prey-retaining properties of the inward curvature of the greater, more proximal portion of the tooth. Many sharks possess upper teeth with serrations along the edges. The serrations vary from one species to another in coarseness and in distribution along tooth edges. Serrated teeth can make greater use of the available biting forces, and they have a greater cutting effect than do smooth-edged teeth. These latter depend upon friction which, because the coefficient friction is always less than 1.0 (often very much less), can make use of only a fraction of the total bite force. However, smooth tooth blades can pierce prey with less resistance and are less prone to binding (becoming immobilized) in the prey tissue. In many shark species serrations are concentrated along the proximal portions of the tooth crown, where the bases of adjacent teeth are in near contact along the jaw margin. In these regions food can be pressed during feeding, resulting in a binding of the teeth in the prey. Release of the binding must be accomplished by cutting the jammed food, to permit clearance of the prey material so it can slip past the tooth rows. The more prominent serrations in such regions may act to puncture and slice the jammed tissue. It is noted that commercial saws are typically designed in various ways to promote clearance between adjacent saw teeth. The pitch or rake of the teeth of sharks is discussed, as is the overall form of the tooth rows along the jaw margins. The relationship between the distribution of teeth along the jaw margins and surface irregularities of the prey surfaces is also considered.     

Leaf Architecture and Systematics of the Hamamelidaceae Sensu Lato

Hamamelids have a long fossil history and an important fossil record. Their interesting biogeographic relationships indicate a great age. There exist good surveys of the pollen and floral organs of this family whereas it is so far poorly known from leaf architecture. The leaf architecture of all 29 genera with more than 60 among the total of 140 species of the family was surveyed in this work using clearified leaves. It is found that leaf architecture analysis may shed light on the relationships within the family and the conclusion of evolution based on leaf architecture basically accords with that based on others. The major categories of leaf architecture of Hamamelids observed in this work are as follows: leaf form, leaf margin, tooth type, venation, marginal ultimate venation, areolation and trichome. It must be emphasized that of all these characters the tooth type is the most stable and useful for systematics. In this work a new tooth type is recognized under the name altingioid. Teeth of this type are obviously asymmetrical, with a persistent transparent gland on the top, and with their lateral veinlets free, not reaching the medial vein. All three genera of the subfamily Liquidambaroideae have this tooth type, whereas most leaves of the rest genera of this family have fothergilloid teeth, which are basically symmetrical, without glands. The venation in the fothergilloid tooth is almost the same as that in the altingioid tooth, the only difference being that the lateral veins on the abaxial side of the altingioid teeth are usually absent or very weak and short if present. The present authors consider that the subfamily Liquidambaroideae has to be separated from the family Hamamelidaceae sensu lato and treated as an independent family, Altingiaceae, on the basis of the special tooth type. different pollen morphology and flower structure. The stability of tooth type may serve classification not only of order and family level, but also of tribe, genus and species level with the help of characters of teeth, such as shape, size, density, distribution, single or double, with or without glands. By comparison of Hamamelidaceae and Altingiaceae with some primitive families of subclass Hamamelidae, namely, Trochodendraceae, Tetracentraceae, Cercidiphyllaceae, Eupteleaceae and Platanaceae, the putative evolutionary trend of tooth types is outlined as follows: ↑ altingioid Chloranthoid → Cercidiphylloid →platanoid → fothergilloid In general evolutionarytrend of teeth within these families is reduction and simplification in structure.     

Morphology and mechanics of the teeth and jaws of white-spotted bamboo sharks (Chiloscyllium plagiosum)

The teeth of white-spotted bamboo sharks (Chiloscyllium plagiosum) are used to clutch soft-bodied prey and crush hard prey; however, the dual function is not evident from tooth morphology alone. Teeth exhibit characteristics that are in agreement with a clutching-type tooth morphology that is well suited for grasping and holding soft-bodied prey, but not for crushing hard prey. The dual role of this single tooth morphology is facilitated by features of the dental ligament and jaw joint. Tooth attachment is flexible and elastic, allowing movement in both sagittal and frontal planes. During prey capture spike-like tooth cusps pierce the flesh of soft prey, thereby preventing escape. When processing prey harder than the teeth can pierce the teeth passively depress, rotating inward towards the oral cavity such that the broader labial faces of the teeth are nearly parallel to the surface of the jaws and form a crushing surface. Movement into the depressed position increases the tooth surface area contacting prey and decreases the total stress applied to the tooth, thereby decreasing the risk of structural failure. This action is aided by a jaw joint that is ventrally offset from the occlusal planes of the jaws. The offset joint position allows many teeth to contact prey simultaneously and orients force vectors at contact points between the jaws and prey in a manner that shears or rolls prey between the jaws during a bite, thus, aiding in processing while reducing forward slip of hard prey from the mouth. Together the teeth, dental ligament, and jaws form an integrated system that may be beneficial to the feeding ecology of C. plagiosum, allowing for a diet that includes prey of varying hardness and elusiveness.     

Development of the dentition in Alligator mississippiensis: upper jaw dental and craniofacial development in embryos, hatchlings, and young juveniles, with a comparison to lower jaw development

Development of the upper dentition in Alligator mississippiensis was investigated using a close series of accurately staged and aged embryos, hatchlings, and young juveniles up to 11 days posthatching, as well as some young and old adult specimens. Studies from scanning electron microscopy, light microscopy, acetate and computer reconstructions, radiography and macroscopy were combined to elucidate the details of embryonic dental development, tooth initiation pattern, dentitional growth, and erupted functional dentition. The results were compared with those from the lower jaw and related to the development of other craniofacial structures. Approximately 17 early teeth in each jaw half develop as surface teeth, of which 13 project for 1 to 12 days before sinking into the mesenchyme. The first three teeth initiate directly from the oral epithelium at Ferguson stages 14-15 (days 15-19 after egg laying), before there is any local trace of dental lamina formation. All other teeth develop from a dental prolamina or lamina; and with progressive lamina development, submerged teeth initiate from the aboral end leading to the formation of replacement teeth. All teeth form dentin matrix, but 12 early teeth do not form enamel. Approximately 20 embryonic teeth are resorbed, 6 are transitional, and 42 function for longer periods after hatching. The embryonic tooth initiation pattern (illustrated by defining a tooth position formula) does not support the previous models of Odontostichi, Zahnreihen, and Tooth Families, each of which postulates perfect regularity. Up to three interstitial tooth positions develop between sites of primary tooth initiation, and families with up to five generations at hatching are at first arbitrarily defined.     

Do all geckos hatch in the same way? Histological and 3D studies of egg tooth morphogenesis in the geckos Eublepharis macularius Blyth 1854 and Lepidodactylus lugubris Duméril & Bibron 1836

The egg tooth of squamates evolved to facilitate hatching from mineralized eggshells. Squamate reptiles can assist their hatching with a single unpaired egg tooth (unidentates) or double egg teeth (geckos and dibamids). Egg tooth ontogeny in two gekkotan species, the leopard gecko Eublepharis macularius and the mourning gecko Lepidodactylus lugubris, was compared using microtomography, scanning electron microscopy, and light microscopy. Investigated species are characterized by different hardnesses of their eggshells. Leopard geckos eggs have a relatively soft and flexible parchment (leathery) shell, while eggshells of mourning geckos are hard and rigid. Embryos of both species, like other Gekkota, have double egg teeth, but the morphology of these structures differs between the investigated species. These differences in shape, localization, and spatial orientation were present from the earliest stages of embryonic development. In mourning gecko, anlagen of differentiating egg teeth change their position on the palate during embryonic development. Initially they are separated by condensed mesenchyme, but later in development, their enamel organs are connected. In leopard geckos, the localization of egg tooth germs does not change, but their spatial orientation does. Egg teeth of this species shift from inward to outward orientation. This is likely related to differences in structure and mechanical properties of eggshells in the studied species. In investigated species, two hatching mechanisms are possible during emergence of young individuals. We speculate that mourning geckos break the eggshell through puncturing action with egg teeth, similar to the pipping phase of chick and turtles embryos. Egg teeth of leopard geckos cut egg membranes similarly to most squamates. Our results also revealed differences in egg tooth implantation between Gekkota and Unidentata: gekkotan egg teeth are subthecodont (in shallow sockets), while those in unidentates are acrodont (attached to the top of the alveolar ridge). © 2020 Wiley Periodicals LLC     

Tooth loss, denture wearing and associated factors among an elderly institutionalised Brazilian population

Objective: This cross‐sectional study assessed the prevalence and extent of tooth loss as well as denture wear and associated factors in institutionalised elderly in Brazil. Background: There is scarcity of research in Brazil concerning geriatric oral health issues. Material and methods: A sample of 335 individuals over 60 years of age, representative of the institutionalised elderly from Belo Horizonte, Brazil, were selected through a stratified sampling strategy. Data were collected from structured questionnaires, reviews of medical records and intra‐oral examinations. Results: Edentulousness was observed in 74.9% of the elderly and was related to age, years of study, income, length of institutionalisation, systemic diseases and mini‐mental score. Among the dentate subjects, 17.9% possessed 20 or more teeth. Approximately half the edentulous elderly (42.6%) and most of the partially dentate subjects (66.7%) did not wear dentures. The multivariate analysis showed that subjects that wear dentures were more likely to be female, possess higher incomes, be more functionally independent and married. Furthermore, the odds of wearing dentures among the elderly who had lost 13–32 teeth were 9.11 times higher than those who had lost up to 12 teeth. Conclusion: Tooth loss is highly prevalent in this institutionalised Brazilian population, and the prevalence of denture wear is low. The extent of tooth loss, income, functional status and marital status are important predictors for denture wear. The development of an oral health programme for these individuals should assist in their rehabilitation needs and promote in‐home care or safe transport for the elderly to a health care location.     

Pattern of tooth loss in an elderly population from Ibadan, Nigeria

Objectives: To determine tooth loss, edentulousness, causes of tooth loss and pattern of tooth loss in the elderly in South East Local Government area (SELGA) in Ibadan. Background data: SELGA is one of the largest in Oyo State, Nigeria and has a population of 225 800. Design: A cross‐sectional survey. Methodology: A total of 690 elderly individuals who were 65 years and above living in various wards in SELGA were interviewed by two interviewers and examined by two trained and calibrated examiners whilst two record clerks recorded all the findings of the examination. Result: Forty‐eight per cent of the subjects in the study had not lost any teeth. The mean tooth loss was 4.5 ± 7.6. Percentage edentulousness was 1.3% and this was higher in males than in females. This difference was not statistically significant (χ² = 0.07 p = 0.7). The total number of teeth lost was 3102, 14% of the total number of teeth examined. The study showed that caries was not a major cause of tooth loss. Only 22 (0.7%) teeth were lost as a result of caries, 19 (0.6%) were lost because of trauma and periodontal disease contributed to loss of 3061 (98.7%) teeth. Mandibular teeth exhibited a higher rate of retention than maxillary teeth. The percentage of elderly individuals with tooth loss increased with age. Conclusion: The study highlights the high life expectancy of a tooth among the elderly in SELGA. Despite the different cause of tooth loss in this area, in comparison with developed countries, the pattern of tooth retention appeared similar.     

The stress model of abutment tooth and periodontal tissues with unilateral mandibular dissociation and loss by precision extracoronal attachment

In order to explore the application of the precision extracoronal attachment based on three-dimensional finite element stress model in the repair of unilateral mandibular dissociation and loss, the stress distribution of the butment and periodontal tissues when the precision extracoronal attachment was used in unilateral mandibular dissociation and loss was analyzed, so as to provide reference for the application of materials in clinical repair. In this study, the biomechanics of oral cavity and its attachment were analyzed to provide theoretical basis for model construction. Because the degree of periodontal tissue absorption and the number of abutment teeth affected the restoration effect of the coronal precision attachment, the models were established from these two perspectives. The results showed that when the periodontal tissue absorption of both abutment teeth exceeded 1/3, the method of double abutment restoration was not recommended. When three abutments were used, there was a significant decrease compared with the absorption of the periodontal tissue of the double abutment. In clinic, the stress distribution of the distal abutment teeth and its periodontal tissues can be improved by increasing the number of abutment tooth. However, since increasing the number of abutments required an increase in the amount of healthy tooth tissue, it couldn’t be blindly selected in the clinic. After comprehensive consideration, it is appropriate to choose two abutment teeth for restoration.     

记甘肃晚侏罗世一蜥蜴新属

本文记述石龙子类 Scincomorpha 蜥蜴的—新属,甘肃拟贝氏蜥 Mimobefklesisaurus gansuensis gen. et sp. nov. 化石发现于甘肃省肃北县马宗山区晚侏罗世的赤金堡群.这是石龙子类化石在我国的第一次发现,也是目前所发现的这类动物在亚洲的最早的代表.     

Logistic analysis of the effects of shovel trait on Carabelli's trait in a mongoloid population

Mongoloid populations differ from Caucasoids by having a high prevalence of shovel trait and a low prevalence of Carabelli's trait. This study was conducted to investigate the effects of the shovel trait on Carabelli's trait in a Mongoloid population. The research design sought a population that resides in an isolated area and exhibits low admixture with neighboring populations. The Mongoloid group selected for study was the Bunun tribe of aborigines who inhabit an alpine area in Taiwan. The effects of sex and age on Carabelli's trait were controlled in this investigation, as was the association between tooth size and Carabelli's trait. Results show that males were more likely to have Carabelli's trait expressed on teeth than females. The buccolingual diameter of Carabelli's trait teeth was larger than that of teeth without the trait. After adjusting for sex, age, and tooth size, the existence of the shovel trait increased the likelihood of having Carabelli's trait by a factor of three, an effect that is significant. © 1996 Wiley-Liss, Inc.     

Simple recessive mutation in ENAM is associated with amelogenesis imperfecta in Italian Greyhounds

We report a familial enamel hypoplasia in Italian Greyhounds resembling non‐syndromic autosomal recessive amelogenesis imperfecta (AI) of humans. The condition uniformly affects deciduous and permanent teeth and is manifested by enamel roughening/thinning and brownish mottling. Affected teeth are often small and pointed with increased gaps. However, basic tooth structure is usually maintained throughout life, and fractures and dental cavities are not a serious problem as in humans. No tissues or organs other than teeth were affected by this mutation, and there was no relationship between enamel hypoplasia and either autoimmunity or periodontal disease, which also are prevalent in the breed. The enamel hypoplasia was associated with a 5‐bp deletion in exon 10 of the enamelin (ENAM) gene. The prevalence of the enamel defect in Italian Greyhounds was 14%, and 30% of dogs with normal teeth were carriers. Genome analyses suggest that the trait is under inadvertent positive selection. Based on the deletion detected in the ENAM gene, a genetic test was developed for identifying mutation carriers, which would enable breeders to manage the trait.     

The activation level of the TNF family receptor, Edar, determines cusp number and tooth number during tooth development

Mutations in members of the ectodysplasin (TNF-related) signalling pathway, EDA, EDAR, and EDARADD in mice and humans produce an ectodermal dysplasia phenotype that includes missing teeth and smaller teeth with reduced cusps. Using the keratin 14 promoter to target expression of an activated form of Edar in transgenic mice, we show that expression of this transgene is able to rescue the tooth phenotype in Tabby (Eda) and Sleek (Edar) mutant mice. High levels of expression of the transgene in wild-type mice result in molar teeth with extra cusps, and in some cases supernumerary teeth, the opposite of the mutant phenotype. The level of activation of Edar thus determines cusp number and tooth number during tooth development.     

Hereditary and environmental dental findings in identification of human remains

The paper presents the results on hereditary and environmental dental findings in identification of human remains exhumed from mass graves in the Republic of Croatia. The total of 17,880 teeth from all the categories (incisors, canines, premolars and molars) was examined. Hereditary findings of the teeth such as shape, size, position, as well as age were used in all of the cases confirming and completing the identification. In only 15% of the cases they were the starting points for the identification that would be later confirmed with another 3-5 traditional identification procedures. Disturbances in tooth eruption were recorded in 22% of the cases, impaction of teeth in 10%, and retarded eruption of teeth in 12%. Disturbances of tooth position were recorded in 65% of the cases. Tooth rotation in 26% and diastema mediana in maxilla or mandible in 39%. Disorders of tooth number in the form of unilateral and bilateral missing of lateral maxillary incisors were recorded only in 2% of the monitored cases. Abnormalities of the tooth shape were found in 11% of the cases. The majority of them were found on the tooth crowns 6%, and less on the tooth roots 5%. Environmental dental findings that were the most significant for the identifications were prosthetic appliances in 30% of cases. Prostheses were helpful in the identification of 3% of the cases, while crowns and bridges were helpful in 27% of the cases. Ante mortem teeth extractions were helpful in 25% of the cases. Teeth restorations were recorded in 20% of the identified cases, amalgams in 19% and aesthetic filings in 1%. Dental caries was helpful in only 10% of the cases, superficial caries in 3% and caries of dentin in 7% of cases.     

Preliminary investigation of variations in tooth replacement in adult Necturus maculosus

Although there are a number of studies on tooth replacement patterns in lower vertebrates, most do not indicate whether this process is continuous throughout the year or is affected by either breeding or seasonal cycles. We have surveyed the replacement patterns found in living and specifically killed Necturus maculosus (Amphibia: Proteidae) to determine the nature of their variation throughout the year prior to investigating possible controlling mechanisms of the formation and eruption of amphibian teeth. Some animals (34), kept in a large outside tank, were killed at monthly intervals and their tooth-bearing bones radiographed using a modification of the technique previously described (Miller and Radnor, '70). Other animals (9), kept at 4°C, were anesthetized with tricaine methanesulphonate (M.S. 222), and wax impressions taken with beading (carding) wax of the functioning teeth at regular intervals. Animals examined in the late spring and summer (25) showed no signs of active tooth replacement. Small replacement teeth visible beneath each functioning tooth enlarged only slightly throughout the summer. In early and late fall some functioning teeth were lost and replacement teeth grew and erupted to replace them. Replacement patterns were very irregular and classical alternate form rarely seen. In a number of animals the replacement series was formed from every third tooth. Animals kept constantly at 4°C showed no replacement phenomena. Patterns varied between the different bones of the jaws and did not support the Zahnreihe concept of Edmund ('60).