Extraction of membrane proteins from a living cell surface using the atomic force microscope and covalent crosslinkers

The force curve mode of the atomic force microscope (AFM) was applied to extract intrinsic membrane proteins from the surface of live cells using AFM tips modified by amino reactive bifunctional covalent crosslinkers. The modified AFM tips were individually brought into brief contact with the living cell surface to form covalent bonds with cell surface molecules. The force curves recorded during the detachment process from the cell surface were often characterized by an extension of a few hundred nanometers followed mostly by a single step jump to the zero force level. Collection and analysis of the final rupture force revealed that the most frequent force values (of the force) were in the range of 0.4–0.6 nN. The observed rupture force most likely represented extraction events of intrinsic membrane proteins from the cell membrane because the rupture force of a covalent crosslinking system was expected to be significantly larger than 1.0 nN, and the separation force of noncovalent ligand-receptor pairs to be less than 0.2 nN, under similar experimental conditions. The transfer of cell surface proteins to the AFM tip was verified by recording characteristic force curves of protein stretching between the AFM tips used on the cell surface and a silicon surface modified with amino reactive bifunctional crosslinkers. This method will be a useful addition to bionanotechnological research for the application of AFM.     

Correlation between surface morphology and surface forces of protein A adsorbed on mica.

We have investigated the morphology and surface forces of protein A adsorbed on mica surface in the protein solutions of various concentrations. The force-distance curves, measured with a surface force apparatus (SFA), were interpreted in terms of two different regimens: a "large-distance" regimen in which an electrostatic double-layer force dominates, and an "adsorbed layer" regimen in which a force of steric origin dominates. To further clarify the forces of steric origin, the surface morphology of the adsorbed protein layer was investigated with an atomic force microscope (AFM) because the steric repulsive forces are strongly affected by the adsorption mode of protein A molecules on mica. At lower protein concentrations (2 ppm, 10 ppm), protein A molecules were adsorbed "side-on" parallel to the mica surfaces, forming a monolayer of approximately 2.5 nm. AFM images at higher concentrations (30 ppm, 100 ppm) showed protruding structures over the monolayer, which revealed that the adsorbed protein A molecules had one end oriented into the solution, with the remainder of each molecule adsorbed side-on to the mica surface. These extending ends of protein A overlapped each other and formed a "quasi-double layer" over the mica surface. These AFM images proved the existence of a monolayer of protein A molecules at low concentrations and a "quasi-double layer" with occasional protrusions at high concentrations, which were consistent with the adsorption mode observed in the force-distance curves.     

Atomic force microscopy and proteins

This review briefly introduces the principles of atomic force microscopy (AFM) applied to protein samples. AFM provides three-dimensional surface images of the proteins with high resolution. The advantage of AFM for protein studies is that AFM can visualize directly the molecule under physiological conditions without previous treatment. AFM operated in the force-spectroscopy mode is now a widespread technique, often used to investigate ligand receptor interactions with the goal of measuring forces at the individual molecule level.     

Substrate chemistry-dependent conformations of single laminin molecules on polymer surfaces are revealed by the phase signal of atomic force microscopy

The conformation of single laminin molecules adsorbed on synthetic substrates is directly observed making use of the phase magnitude in tapping mode atomic force microscopy (AFM). With AFM, it is not possible to differentiate the proteins on the substrate if use is made of the height signal, since the roughness of the material becomes of the same order of magnitude as the adsorbed protein, typically 10 nm height. This work shows how AFM can be exploited to reveal protein conformation on polymer materials. Different laminin morphologies are observed on a series of different copolymers based on ethyl acrylate and hydroxyethyl acrylate as a function of the surface density of -OH groups: from globular to completely extended morphologies of the protein molecules are obtained, and the onset of laminin network formation on some substrates can be clearly identified. The results stress the importance of the underlying synthetic substrate's surface chemistry for the biofunctional conformation of adsorbed proteins.     

Nanobiomechanics of proteins and biomembrane

A review of the work done in the Laboratory of Biodynamics of Tokyo Institute of Technology in the last decade has been summarized in this article in relation to the results reported from other laboratories. The emphasis here is the application of nanomechanics based on the force mode of atomic force microscopy (AFM) to proteins and protein-based biological structures. Globular proteins were stretched in various ways to detect the localized rigidity inside of the molecule. When studied by this method, bovine carbonic anhydrase II (BCA II), calmodulin and OspA protein all showed the presence of localized rigid structures inside the molecules. Protein compression experiments were done on BCA II to obtain an estimate of the Young modulus and its change in the process of denaturation. Then, the AFM probe method was turned on to cell membranes and cytoplasmic components. Force curves accompanying the extraction process of membrane proteins from intact cells were analysed in relation to their interaction with the cytoskeletal components. By pushing the AFM probe further into the cytoplasm, mRNAs were recovered from a live cell with minimal damage, and multiplied using PCR technology for their identification. Altogether, the work introduced here forms the basis of nanomechanics of protein and protein-based biostructures and application of the nanomechanical technology to cell biology.     

原子力显微技术在观测微生物表面形态中的应用

原子力显微技术作为一门新发展起来的显微成像技术,不仅具有在近生理条件下对样本实时、高分辨率三维成像等特点,而且能通过力矩测量探知样本物理性状。即给人们认识微生物的表面结构提供又一平台,也为揭示微生物表面结构与功能之间的关系提供一种新方法。介绍了对微生物表面形态观测中常用测量模式和某些样品固定方法:多孔膜技术、凹陷技术,概括近年来原子力显微技术在微生物学中的应用情况。     

Atomic force microscopy for the study of membrane proteins

Fundamental biological processes such as cell-cell communication, signal transduction, molecular transport and energy conversion are performed by membrane proteins. These important proteins are studied best in their native environment, the lipid bilayer. The atomic force microscope (AFM) is the instrument of choice to determine the native surface structure, supramolecular organization, conformational changes and dynamics of membrane-embedded proteins under near-physiological conditions. In addition, membrane proteins are imaged at subnanometer resolution and at the single molecule level with the AFM. This review highlights the major advances and results achieved on reconstituted membrane proteins and native membranes as well as the recent developments of the AFM for imaging.     

Atomic force bio-analytics

The atomic force microscope (AFM) allows biomolecules to be observed and manipulated under native conditions. It operates in buffer solution, produces molecular images with outstanding signal-to-noise ratio, and addresses single molecules. Progress in sample preparation and instrumentation has led to topographs that reveal sub-nanometer details and surface dynamics of biomolecules. Antibodies or oligonucleotides immobilized on cantilevers induce bending upon binding of the cognate biomolecule, allowing sub-picomolar concentrations to be measured. Biomolecules tethered between support and retracting AFM-tip produce force extension curves that reflect the mechanical stability of secondary structure elements. Furthermore, multifunctional tips may activate single molecules to observe them at work. In all cases, the cantilever is critical: its mechanical properties dictate the force-sensitivity and the scanning speed.     

Single-molecule detection of phosphorylation-induced plasticity changes during ezrin activation

Ezrin-radixin-moesin protein family provides a regulated link between the cortical actin cytoskeleton and the plasma membrane. Phosphorylation of ezrin has been functionally linked to membrane dynamics and plasticity. Our recent study demonstrated that phosphorylation of the conserved T567 residue of ezrin alters the physiology of gastric parietal cells. However, the molecular mechanism of phosphorylation-induced ezrin activation has remained elusive. Here we use atomic force microscopy (AFM) to probe phosphorylation-mediated activation of ezrin in single molecules. The phospho-mimicking and non-phosphorylatable mutant ezrin proteins were generated and purified to homogeneity. Comparative analyses of two ezrin mutants by AFM demonstrate the unfolding of the N- and C-terminal domains upon the phospho-activation. To measure the physical force underlying the inter-domain contact during mechanical unfolding, we probed the defined region of ezrin using the N-terminal ezrin coated onto the AFM tip. Comparative force measurements indicate that T567 phosphorylation-induced unfolding of ezrin favors the inter-molecular association. Taken together, these results provide molecular illustration of phosphorylation elicited functional activation of ERM proteins and indicate that stimulus-induced protein conformational change can be used as a signaling mechanism orchestrating cellular dynamics.     

Electrostatically balanced subnanometer imaging of biological specimens by atomic force microscope.

To achieve high-resolution topographs of native biological macromolecules in aqueous solution with the atomic force microscope (AFM) interactions between AFM tip and sample need to be considered. Short-range forces produce the submolecular information of high-resolution topographs. In contrast, no significant high-resolution information is provided by the long-range electrostatic double-layer force. However, this force can be adjusted by pH and electrolytes to distribute the force applied to the AFM tip over a large sample area. As demonstrated on fragile biological samples, adjustment of the electrolyte solution results in a local reduction of both vertical and lateral forces between the AFM tip and proteinous substructures. Under such electrostatically balanced conditions, the deformation of the native protein is minimized and the sample surface can be reproducibly contoured at a lateral resolution of 0.6 nm.     

Nano-mechanical exploration of the surface and sub-surface of hydrated cells of Staphylococcus epidermidis

The surface of hydrated cells of Staphylococcus epidermidis has been probed using an atomic force microscope. While local force measurements over the surface of bacteria reveal a heterogeneous chemical surface, with heterogeneous mechanical properties, different kinds of force curves appear with high frequency, and are thought to provide information on features contributing strongly to the overall mechanical and surface behaviour of the cell. Force curves often present two different mechanical regimes, being the first one (outer) of about 48 nm thick, and presenting a local relative elasticity of about 0.08 N/m, which is about a third of the relative elasticity of the inner part of the cell wall, harder, with a relative elasticity of about 0.24 N/m, in water. Both regimes appears as straight lines in the force versus distance curves (the ‘corresponding’ stress–strain curves in contact mechanics), but hysteresis is observed between the approach and the retraction line in the inner regime, indicating a degree of viscoelasticity. No viscoelasticity is observed in the outer regime, however, which presents quite linear and juxtaposed approach-retraction lines. These kinds of force curves do not present measurable pull-off forces nor snap-in forces, which indicates an almost null interaction between tip and bacterial surface, which could be in agreement with the measured very high hydrophobicity of this strain. Another kind of force curve has been observed recurrently, showing peaks in the retraction curves. Adhesive pull-off forces were measured giving an average of about 2 nN. Interestingly, however, these force curves appear only when quite irregular and wavy retraction curves are present, from the very beginning of its trace (maximum indentation). This leads us to think that these pull-off forces measured by our AFM do not give information on surface forces-unbinding events at the surface of the bacteria, but could be related to events at the sub-surface of the cell surface. Oscillations seen in the retraction curve in the portion corresponding to the contact with the bacteria surface could be due to rupture phenomena within the multilayered cell wall architecture expected in Gram-positive bacteria as Staphylococcus epidermidis, which could result in local irreversible deformations of the cell surface. Imaging with a sharp tip in contact mode sometimes leads to surface damage. Force curves recorded over damaged parts of the cell surface showed a completely different behaviour, in many cases with two well-defined high-adhesion peaks, and also interestingly, with snap-in forces of about 0–2 nN, which seems to indicate a completely different electrical/hydrophobicity state only a few nanometers down from the surface. Similar indentation effects can occur in the contact of a bacterial cell with a solid surface, even when showing only atomic-molecular-scale roughness, thus interacting not only with the very surface of the cell, especially when soft layers are present in the outer. Our results highlight the importance of the cell surface mechanical properties and their interplay with purely surface properties when analyzing cell–material interaction, and show the AFM as a useful method for investigating this.     

Coarse-grained strategy for modeling protein stability in concentrated solutions. II: phase behavior

We use highly efficient transition-matrix Monte Carlo simulations to determine equilibrium unfolding curves and fluid phase boundaries for solutions of coarse-grained globular proteins. The model we analyze derives the intrinsic stability of the native state and protein-protein interactions from basic information about protein sequence using heteropolymer collapse theory. It predicts that solutions of low hydrophobicity proteins generally exhibit a single liquid phase near their midpoint temperatures for unfolding, while solutions of proteins with high sequence hydrophobicity display the type of temperature-inverted, liquid-liquid transition associated with aggregation processes of proteins and other amphiphilic molecules. The phase transition occurring in solutions of the most hydrophobic protein we study extends below the unfolding curve, creating an immiscibility gap between a dilute, mostly native phase and a concentrated, mostly denatured phase. The results are qualitatively consistent with the solution behavior of hemoglobin (HbA) and its sickle variant (HbS), and they suggest that a liquid-liquid transition resulting in significant protein denaturation should generally be expected on the phase diagram of high-hydrophobicity protein solutions. The concentration fluctuations associated with this transition could be a driving force for the nonnative aggregation that can occur below the midpoint temperature.     

Surface charge density measurement of a single protein molecule with a controlled orientation by AFM

The spatial distribution of functional groups causes a charge distribution that often has a close relationship with its biofunctions. To understand them of the protein molecules, measurements of the charge distribution under physiological conditions are desired. Atomic force microscopy (AFM) has been utilized to measure the surface charge density by measuring the electric double layer (EDL) force caused by the overlap of the EDLs on the surfaces of the AFM tip and the biomolecule. Here, we demonstrated the surface charge density measurement of a single streptavidin (SA) protein molecule by the three-dimensional force mapping method based on frequency modulation AFM (FM-AFM). The SA has a strong affinity to biotin because of the electrostatic interactions between the molecules. Therefore, the surface charge density measurements of the biotin-binding sites and other surface areas of the molecule have been anticipated. However, the surface charge density of the surfaces other than the biotin-binding side has never been measured. We demonstrate the surface charge density measurement of the top surface of the single SA molecule, which is perpendicular to the biotin-binding sides, with a controlled orientation using DNA origami as a template by FM-AFM in an electrolyte solution. The surface charge density of the top surface of the SA molecule was estimated by fitting the experimental force curves to the Derjaguin-Landau-Verwey-Overbeck theory. We found that the surface charge density of the top surface of the SA molecule is comparable to those reported earlier for the biotin-binding sides of the molecule. We expect that, by using the DNA origami technology, one can control the orientation of a biomolecule attached to the substrate and measure the surface charge density of the specific surface areas of the biomolecule to obtain information that will help us to understand the relationship between their structures and functions.     

Automated force volume image processing for biological samples

Atomic force microscopy (AFM) has now become a powerful technique for investigating on a molecular level, surface forces, nanomechanical properties of deformable particles, biomolecular interactions, kinetics, and dynamic processes. This paper specifically focuses on the analysis of AFM force curves collected on biological systems, in particular, bacteria. The goal is to provide fully automated tools to achieve theoretical interpretation of force curves on the basis of adequate, available physical models. In this respect, we propose two algorithms, one for the processing of approach force curves and another for the quantitative analysis of retraction force curves. In the former, electrostatic interactions prior to contact between AFM probe and bacterium are accounted for and mechanical interactions operating after contact are described in terms of Hertz-Hooke formalism. Retraction force curves are analyzed on the basis of the Freely Jointed Chain model. For both algorithms, the quantitative reconstruction of force curves is based on the robust detection of critical points (jumps, changes of slope or changes of curvature) which mark the transitions between the various relevant interactions taking place between the AFM tip and the studied sample during approach and retraction. Once the key regions of separation distance and indentation are detected, the physical parameters describing the relevant interactions operating in these regions are extracted making use of regression procedure for fitting experiments to theory. The flexibility, accuracy and strength of the algorithms are illustrated with the processing of two force-volume images, which collect a large set of approach and retraction curves measured on a single biological surface. For each force-volume image, several maps are generated, representing the spatial distribution of the searched physical parameters as estimated for each pixel of the force-volume image.     

Effect of water on the surface molecular mobility of poly(lactide) thin films: an atomic force microscopy study

Physical properties associated with molecular mobility on the surface of thin films with 300 nm thickness for poly(lactide)s (PLAs) were studied under vacuum conditions as well as under aqueous conditions by using friction force mode atomic force microscopy (AFM). Two types of PLAs were applied for the experimental samples as uncrystallizable PLA (uc-PLA) and crystallizable PLA (c-PLA). The friction force on the surface of thin films was measured as a function of temperature to assess the surface molecular mobility both under vacuum and under aqueous conditions. A lower glass-transition temperature of the uc-PLA surface in water was detected than that under vacuum conditions. In the case of the c-PLA thin film, change in friction force was detected at a lower temperature under aqueous conditions than in vacuo. A morphological change was observed in the c-PLA thin film during heating process from room temperature to 100 degrees C by temperature-controlled AFM. The surface of the c-PLA thin film became rough due to the cold crystallization, and the crystallization of c-PLA molecules in water took place at a lower temperature than in vacuo. These friction force measurements and AFM observations suggest that molecular motion on the surface of the both uc- and c-PLA thin films is enhanced in the presence of water molecules. In addition, in situ AFM observation of the enzymatic degradation process for the c-PLA thin film crystallized at 160 degrees C was carried out in buffer solution containing proteinase K at room temperature. The amorphous region around the hexagonal crystal was eroded within 15 min. It has been suggested that the adsorption of water molecules on the PLA film surface enhances the surface molecular mobility of the glassy amorphous region of PLA and induces the enzymatic hydrolysis by proteinase K.     

THE ATOMIC FORCE MICROSCOPE DETECTS ATP-SENSITIVE PROTEIN CLUSTERS IN THE PLASMA MEMBRANE OF TRANSFORMED MDCK CELLS

Plasma membrane proteins are supposed to form clusters that allow ‘functional cross-talk’ between individual molecules within nanometre distance. However, such hypothetical protein clusters have not yet been shown directly in native plasma membranes. Therefore, we developed a technique to get access to the inner face of the plasma membrane of cultured transformed kidney (MDCK) cells. The authors applied atomic force microscopy (AFM) to visualize clusters of native proteins protruding from the cytoplasmic membrane surface. We used the K⁺channel blocker iberiotoxin (IBTX), a positively charged toxin molecule, that binds with high affinity to plasma membrane potassium channels and to atomically flat mica. Thus, apical plasma membranes could be ‘glued’ with IBTX to the mica surface with the cytosolic side of the membrane accessible to the scanning AFM tip. The topography of these native inside-out membrane patches was imaged with AFM in electrolyte solution mimicking the cytosol. The plasma membrane could be clearly identified as a lipid bilayer with the characteristic height of 4.9±0.02nm. Multiple proteins protruded from the lipid bilayer into the cytosolic space with molecule heights between 1 and 20nm. Large protrusions were most likely protein clusters. Addition of the proteolytic enzyme pronase to the bath solution led to the disappearance of the proteins within minutes. The metabolic substrate ATP induced a shape-change of the protein clusters and smaller subunits became visible. ADP or the non-hydrolysable ATP analogue, ATP-γ-S, could not exert similar effects. It is concluded that plasma membrane proteins (and/or membrane associated proteins) form ‘functional clusters’ in their native environment. The ‘physiological’ arrangement of the protein molecules within a cluster requires ATP.     

Application of atomic force microscopy in cancer research

Atomic force microscopy (AFM) allows for nanometer-scale investigation of cells and molecules. Recent advances have enabled its application in cancer research and diagnosis. The physicochemical properties of live cells undergo changes when their physiological conditions are altered. These physicochemical properties can therefore reflect complex physiological processes occurring in cells. When cells are in the process of carcinogenesis and stimulated by external stimuli, their morphology, elasticity, and adhesion properties may change. AFM can perform surface imaging and ultrastructural observation of live cells with atomic resolution under near-physiological conditions, collecting force spectroscopy information which allows for the study of the mechanical properties of cells. For this reason, AFM has potential to be used as a tool for high resolution research into the ultrastructure and mechanical properties of tumor cells. This review describes the working principle, working mode, and technical points of atomic force microscopy, and reviews the applications and prospects of atomic force microscopy in cancer research.     

Biospecific irreversible fishing coupled with atomic force microscopy for detection of extremely low‐abundant proteins

In the absence of an analog of PCR for proteins, the concentration detection limit (DL) becomes a real challenge. The problem may be solved by means of a combination of biospecific irreversible fishing with atomic force microscopy (AFM). AFM offers the ability to register individual molecules and their complexes, while biospecific fishing takes advantage of an affine interaction between analyte molecules spread over a large volume of biomaterial and ligand molecules immobilized on the chip surface. Fishing may be conducted in Kd‐dependent reversible mode and in Kd‐independent irreversible mode. In this study, the DLs of two previously applied proteomic approaches were determined and compared to the DL of a newly developed analytical method. The first approach, based on MS analysis of biomaterial after 2‐DE or LC separation of proteins, attained a DL at the level of 10^?8–10^?10 M. The second approach, based on the optical biosensor analysis of molecular interactions in the format of proteomic microarrays, had a DL of 10^?9–10^?10 M. Our proposed method which combines biospecific fishing with AFM allowed us to attain DL values of 10^?11 M under reversible binding conditions and 10^?16 M under irreversible binding conditions.     

Real-Time Dynamic Adsorption Processes of Cytochrome c on an Electrode Observed through Electrochemical High-Speed Atomic Force Microscopy

An understanding of dynamic processes of proteins on the electrode surface could enhance the efficiency of bioelectronics development and therefore it is crucial to gain information regarding both physical adsorption of proteins onto the electrode and its electrochemical property in real-time. We combined high-speed atomic force microscopy (HS-AFM) with electrochemical device for simultaneous observation of the surface topography and electron transfer of redox proteins on an electrode. Direct electron transfer of cytochrome c (cyt c) adsorbed on a self-assembled monolayers (SAMs) formed electrode is very attractive subject in bioelectrochemistry. This paper reports a real-time visualization of cyt c adsorption processes on an 11-mercaptoundecanoic acid-modified Au electrode together with simultaneous electrochemical measurements. Adsorbing cyt c molecules were observed on a subsecond time resolution simultaneously with increasing redox currents from cyt c using EC-HS-AFM. The root mean square roughness (R_RMS) from the AFM images and the number of the electrochemically active cyt c molecules adsorbed onto the electrode (Γ) simultaneously increased in positive cooperativity. Cyt c molecules were fully adsorbed on the electrode in the AFM images when the peak currents were steady. This use of electrochemical HS-AFM significantly facilitates understanding of dynamic behavior of biomolecules on the electrode interface and contributes to the further development of bioelectronics.     

Nanomechanical recognition of sphingomyelin-rich membrane domains by atomic force microscopy

Sphingomyelin (SM) is a reservoir of signaling lipids and forms specific lipid domains in biomembranes together with cholesterol. In this study, atomic force microscopy (AFM) and force measurement were applied to investigate the interaction of SM-binding protein toxin, lysenin, with N-palmitoyl-D-erythro-sphingosylphosphorylcholine (palmitoyl sphingomyelin, PSM) bilayer spread over a mica substrate, in an aqueous buffer solution. Lysenin molecules were grafted on a silicon nitride tip for AFM by siloxane-thiol-amide coupling. The bilayers were prepared by the Langmuir-Blodgett (LB)/Langmuir-Schaefer (LS) method. By repeating cycles of tip approach/retraction motion, single-molecular adhesion motions were observed on the force curve, characterized as "fishing curves". The addition of cholesterol and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) did not alter the peak force but increased the peak extension. Mixtures of PSM/DOPC/cholesterol exhibited 2-dimensional two-phase domain separation. The characteristic fishing curves were observed exclusively in one of the phases, indicating the selective interaction of the lysenin tip to PSM-rich membrane domains. Our results indicate that the AFM tips conjugated with lysenin are useful to detect the surface distribution of SM-rich membrane domains as well as the nanomechanical properties of the domains.