DNA binding by the KP repressor protein inhibits P-element transposase activity in vitro.

P elements are a family of mobile DNA elements found in Drosophila. P-element transposition is tightly regulated, and P-element-encoded repressor proteins are responsible for inhibiting transposition in vivo. To investigate the molecular mechanisms by which one of these repressors, the KP protein, inhibits transposition, a variety of mutant KP proteins were prepared and tested for their biochemical activities. The repressor activities of the wild-type and mutant KP proteins were tested in vitro using several different assays for P-element transposase activity. These studies indicate that the site-specific DNA-binding activity of the KP protein is essential for repressing transposase activity. The DNA-binding domain of the KP repressor protein is also shared with the transposase protein and resides in the N-terminal 88 amino acids. Within this region, there is a C2HC putative metal-binding motif that is required for site-specific DNA binding. In vitro the KP protein inhibits transposition by competing with the transposase enzyme for DNA-binding sites near the P-element termini.     

The human SETMAR protein preserves most of the activities of the ancestral Hsmar1 transposase

Transposons have contributed protein coding sequences to a unexpectedly large number of human genes. Except for the V(D)J recombinase and telomerase, all remain of unknown function. Here we investigate the activity of the human SETMAR protein, a highly expressed fusion between a histone H3 methylase and a mariner family transposase. Although SETMAR has demonstrated methylase activity and a DNA repair phenotype, its mode of action and the role of the transposase domain remain obscure. As a starting point to address this problem, we have dissected the activity of the transposase domain in the context of the full-length protein and the isolated transposase domain. Complete transposition of an engineered Hsmar1 transposon by the transposase domain was detected, although the extent of the reaction was limited by a severe defect for cleavage at the 3' ends of the element. Despite this problem, SETMAR retains robust activity for the other stages of the Hsmar1 transposition reaction, namely, site-specific DNA binding to the transposon ends, assembly of a paired-ends complex, cleavage of the 5' end of the element in Mn(2+), and integration at a TA dinucleotide target site. SETMAR is unlikely to catalyze transposition in the human genome, although the nicking activity may have a role in the DNA repair phenotype. The key activity for the mariner domain is therefore the robust DNA-binding and looping activity which has a high potential for targeting the histone methylase domain to the many thousands of specific binding sites in the human genome provided by copies of the Hsmar1 transposon.     

A rice Tc1/mariner-like element transposes in yeast

The Tc1/mariner transposable element superfamily is widely distributed in animal and plant genomes. However, no active plant element has been previously identified. Nearly identical copies of a rice (Oryza sativa) Tc1/mariner element called Osmar5 in the genome suggested potential activity. Previous studies revealed that Osmar5 encoded a protein that bound specifically to its own ends. In this report, we show that Osmar5 is an active transposable element by demonstrating that expression of its coding sequence in yeast promotes the excision of a nonautonomous Osmar5 element located in a reporter construct. Element excision produces transposon footprints, whereas element reinsertion occurs at TA dinucleotides that were either tightly linked or unlinked to the excision site. Several site-directed mutations in the transposase abolished activity, whereas mutations in the transposase binding site prevented transposition of the nonautonomous element from the reporter construct. This report of an active plant Tc1/mariner in yeast will provide a foundation for future comparative analyses of animal and plant elements in addition to making a new wide host range transposable element available for plant gene tagging.     

The Drosophila P-element KP repressor protein dimerizes and interacts with multiple sites on P-element DNA.

Drosophila P elements are mobile DNA elements that encode an 87-kDa transposase enzyme and transpositional repressor proteins. One of these repressor proteins is the 207-amino-acid KP protein which is encoded by a naturally occurring P element with an internal deletion. To study the molecular mechanisms by which KP represses transposition, the protein was expressed, purified, and characterized. We show that the KP protein binds to multiple sites on the ends of P-element DNA, unlike the full-length transposase protein. These sites include the high-affinity transposase binding site, an 11-bp transpositional enhancer, and, at the highest concentrations tested, the terminal 31-hp inverted repeats. The DNA binding domain was localized to the N-terminal 98 amino acids and contains a CCHC sequence, a potential metal binding motif. We also demonstrate that the KP repressor protein can dimerize and contains two protein-protein interaction regions and that this dimerization is essential for high-affinity DNA binding.     

Alternative conformations of a nucleic acid four-way junction

Sleeping Beauty (SB), a member of the Tc1/mariner superfamily of transposable elements, is the only active DNA-based transposon system of vertebrate origin that is available for experimental manipulation. We have been using the SB element as a research tool to investigate some of the cis and trans-requirements of element mobilization, and mechanisms that regulate transposition in vertebrate species. In contrast to mariner transposons, which are regulated by overexpression inhibition, the frequency of SB transposition was found to be roughly proportional to the amount of transposase present in cells. Unlike Tc1 and mariner elements, SB contains two binding sites within each of its terminal inverted repeats, and we found that the presence of both of these sites is a strict requirement for mobilization. In addition to the size of the transposon itself, the length as well as sequence of the DNA outside the transposon have significant effects on transposition. As a general rule, the closer the transposon ends are, the more efficient transposition is from a donor molecule. We have found that SB can transform a wide range of vertebrate cells from fish to human. However, the efficiency and precision of transposition varied significantly among cell lines, suggesting potential involvement of host factors in SB transposition. A positive-negative selection assay was devised to enrich populations of cells harboring inserted transposons in their chromosomes. Using this assay, of the order of 10,000 independent transposon insertions can be generated in human cells in a single transfection experiment. Sleeping Beauty can be a powerful alternative to other vectors that are currently used for the production of transgenic animals and for human gene therapy.     

What is the impact of transposable elements on host genome variability?

The spread of a transposable element family through a wild population may be of astonishing rapidity. At least three families of transposable genetic elements have recently invaded Drosophila melanogaster worldwide, including the P element. The mechanism has been a process of effectively replicative transposition, and, for the P element, has occurred notwithstanding the sterility induced by unrestricted movement. This element's invasion into D. melanogaster has been accompanied by the development of heterogeneity between P sequences, most of which now have internal deletions. Increasing evidence suggests that some deleted elements can repress P transposition, thereby protecting the host from the harmful effects of complete elements. Such repressing elements may rise to high frequencies in populations as a result of selection at the level of the host. We here investigate selective sweeps invoked by the spread of P sequences in D. melanogaster populations. Numerous high-frequency sites have been identified on the X chromosome, which differ in frequency between populations, and which are associated with repression of P-element transposition. Unexpectedly, sequences adjacent to high-frequency P-element sites do not show reduced levels of genetic diversity, and DNA variability is in linkage equilibrium with the presence or absence of a P element at the adjacent selected site. This might be explained by multiple insertions or through a selection for recombination analogous to that seen in 'hitchhiking'.     

Regulation of the transposable element mariner

The mariner/ Tc1 superfamily of transposable elements is widely distributed in animal genomes and is especially prevalent in insects. Their wide distribution results from their ability to be disseminated among hosts by horizontal transmission and also by their ability to persist in genomes through multiple speciation events. Although a great deal is known about the molecular mechanisms of transposition and excision, very little is known about the mechanisms by which transposition is controlled within genomes. The issue of mariner/Tc1 regulation is critical in view of the great interest in these elements as vectors for germline transformation of insect pests and vectors of human disease. Several potentially important regulatory mechanisms have been identified in studies of genetically engineered mariner elements. One mechanism is overproduction inhibition, in which excessive wild-type transposase reduces the rate of excision of a target element. A second mechanism is mediated by certain mutant transposase proteins, which antagonize the activity of the wild-type transposase. The latter process may help explain why the vast majority of MLEs in nature undergo ‘vertical inactivation’ by multiple mutations and, eventually, stochastic loss. Another potential mechanism of regulation may result from transposase titration by defective elements that retain their DNA binding sites and ability to transpose. There is also evidence that some mariner/Tc1 elements can be mobilized in a type of hybrid dysgenesis. This revised version was published online in August 2006 with corrections to the Cover Date.     

Does the proposed DSE motif form the active center in the Hermes transposase?

Donor cleavage and strand transfer are two functions performed by transposases during transposition of class II transposable elements. Within transposable elements, the only active center described, to date, facilitating both functions, is the so-called DDE motif. A second motif, R-K-H/K-R-H/W-Y, is found in the site-specific recombinases of the tyrosine recombinase family. While present in many bacterial insertion sequences as well as in the eukaryotic family of mariner/Tc1 elements, the DDE motif was considered absent in other classes of eukaryotic class II elements such as P, and hAT and piggyBac. Based on sequence alignments of a hobo-like element from the nematode Caenorhabditis elegans, to a variety of other hAT transposases and several members of the mariner/Tc1 group, Bigot et al. [Gene 174 (1996) 265] proposed the presence of a DSE motif in hAT transposases. In the present study we tested if each of these three residues is required for transposition of the Hermes element, a member of the hAT family commonly used for insect transformation. While D402N and E572Q mutations lead to knock-out of Hermes function, mutations S535A and S535D did not affect transposition frequency or the choice of integration sites. These data give the first experimental support that D402 and E572 are indeed required for transposition of Hermes. Furthermore, this study indicates that the active center of the Hermes transposase differs from the proposed DSE motif. It remains to be shown if other residues also form the active site of this transposase.     

Recent horizontal transfer of mellifera subfamily mariner transposons into insect lineages representing four different orders shows that selection acts only during horizontal transfer

We report the isolation and sequencing of genomic copies of mariner transposons involved in recent horizontal transfers into the genomes of the European earwig, Forficula auricularia; the European honey bee, Apis mellifera; the Mediterranean fruit fly, Ceratitis capitata; and a blister beetle, Epicauta funebris, insects from four different orders. These elements are in the mellifera subfamily and are the second documented example of full-length mariner elements involved in this kind of phenomenon. We applied maximum likelihood methods to the coding sequences and determined that the copies in each genome were evolving neutrally, whereas reconstructed ancestral coding sequences appeared to be under selection, which strengthens our previous hypothesis that the primary selective constraint on mariner sequence evolution is the act of horizontal transfer between genomes.     

Identification of two mariner-like elements in the genome of the mosquito Ochlerotatus atropalpus

Two distinct mariner-like elements, Atmar-1 and Atmar-2, were isolated from the genome of the mosquito Ochlerotatus atropalpus. Full-sized Atmar-1 elements, obtained by screening a genomic library, have a 1293-bp consensus sequence with 27-bp inverted terminal repeats and a 1047-bp open reading frame (ORF) encoding the transposase. The Atmar-2 elements were amplified by polymerase chain reaction from genomic DNA and contain the central part of the transposase ORF. Individual clones of both mariner elements contain deletions, frameshifts, and stop codons. The Atmar-1 elements are present in 370-1200 copies, while the Atmar-2 elements are present in approximately 100-300 copies per haploid genome. One of the Atmar-1 elements, Atmar-1.33, could be mobilized, suggesting the presence of functional Atmar-1 elements elsewhere in the genome. Phylogenetic analysis demonstrated that Atmar-1 elements belong to the irritans subfamily and Atmar-2 elements to the cecropia subfamily of mariner elements.     

Loss of transposase-DNA interaction may underlie the divergence of mariner family transposable elements and the ability of more than one mariner to occupy the same genome

Mariners are a large family of eukaryotic DNA-mediated transposable elements that move via a cut-and-paste mechanism. Several features of the evolutionary history of mariners are unusual. First, they appear to undergo horizontal transfer commonly between species on an evolutionary timescale. They can do this because they are able to transpose using only their own self-encoded transposase and not host-specific factors. One consequence of this phenomenon is that more than one kind of mariner can be present in the same genome. We hypothesized that two mariners occupying the same genome would not interact. We tested the limits of mariner interactions using an in vitro transposition system, purified mariner transposases, and DNAse I footprinting. Only mariner elements that were very closely related to each other (ca. 84% identity) cross-mobilized, and then inefficiently. Because of the dramatic suppression of transposition between closely related elements, we propose that to isolate elements functionally, only minor changes might be necessary between elements, in both inverted terminal repeat and amino acid sequence. We further propose a mechanism to explain mariner diversification based on this phenomenon.     

A bacterial genetic screen identifies functional coding sequences of the insect mariner transposable element Famar1 amplified from the genome of the earwig, Forficula auricularia

Transposons of the mariner family are widespread in animal genomes and have apparently infected them by horizontal transfer. Most species carry only old defective copies of particular mariner transposons that have diverged greatly from their active horizontally transferred ancestor, while a few contain young, very similar, and active copies. We report here the use of a whole-genome screen in bacteria to isolate somewhat diverged Famar1 copies from the European earwig, Forficula auricularia, that encode functional transposases. Functional and nonfunctional coding sequences of Famar1 and nonfunctional copies of Ammar1 from the European honey bee, Apis mellifera, were sequenced to examine their molecular evolution. No selection for sequence conservation was detected in any clade of a tree derived from these sequences, not even on branches leading to functional copies. This agrees with the current model for mariner transposon evolution that expects neutral evolution within particular hosts, with selection for function occurring only upon horizontal transfer to a new host. Our results further suggest that mariners are not finely tuned genetic entities and that a greater amount of sequence diversification than had previously been appreciated can occur in functional copies in a single host lineage. Finally, this method of isolating active copies can be used to isolate other novel active transposons without resorting to reconstruction of ancestral sequences.     

Self-inflicted wounds, template-directed gap repair and a recombination hotspot. Effects of the mariner transposase

Aberrant repair products of mariner transposition occur at a frequency of approximately 1/500 per target element per generation. Among 100 such mutations in the nonautonomous element peach, most had aberrations in the 5' end of peach (40 alleles), in the 3' end of peach (11 alleles), or a deletion of peach with or without deletion of flanking genomic DNA (29 alleles). Most mariner mutations can be explained by exonuclease "nibble" and host-mediated repair of the double-stranded gap created by the transposase, in contrast to analogous mutations in the P element. In mariner, mutations in the 5' inverted repeat are smaller and more frequent than those in the 3' inverted repeat, but secondary mutations in target elements with a 5' lesion usually had 3' lesions resembling those normally found at the 5' end. We suggest that the mariner transposase distinguishes between the 5' and 3' ends of the element, and that the 5' end is relatively more protected after strand scission. We also find: (1) that homolog-dependent gap repair is a frequent accompaniment to mariner excision, estimated as 30% of all excision events; and (2) that mariner is a hotspot of recombination in Drosophila females, but only in the presence of functional transposase.     

Molecular characterization of a mariner-like element in the Atta sexdens rubropilosa genome

Mobile elements are widely present in eukaryotic genomes. They are repeated DNA segments that are able to move from one locus to another within the genome. They are divided into two main categories, depending on their mechanism of transposition, involving RNA (class I) or DNA (class II) molecules. The mariner-like elements are class II transposons. They encode their own transposase, which is necessary and sufficient for transposition in the absence of host factors. They are flanked by a short inverted terminal repeat and a TA dinucleotide target site, which is duplicated upon insertion. The transposase consists of two domains, an N-terminal inverted terminal repeat binding domain and a C-terminal catalytic domain. We identified a transposable element with molecular characteristics of a mariner-like element in Atta sexdens rubropilosa genome. Identification started from a PCR with degenerate primers and queen genomic DNA templates, with which it was possible to amplify a fragment with mariner transposable-element homology. Phylogenetic analysis demonstrated that this element belongs to the mauritiana subfamily of mariner-like elements and it was named Asmar1. We found that Asmar1 is homologous to a transposon described from another ant, Messor bouvieri. The predicted transposase sequence demonstrated that Asmar1 has a truncated transposase ORF. This study is part of a molecular characterization of mobile elements in the Atta spp genome. Our finding of mariner-like elements in all castes of this ant could be useful to help understand the dynamics of mariner-like element distribution in the Hymenoptera.     

maT--a clade of transposons intermediate between mariner and Tc1

A group of transposons, named maT, with characteristics intermediate between mariner and Tc1 transposons, is described. Two defective genomic copies of MdmaT from the housefly Musca domestica, with 85% identity, were found flanking and imbedded in the MdalphaE7 esterase gene involved in organophosphate insecticide resistance. Two cDNA clones, with 99% identity to each other and 72%-89% identity to the genomic copies were also obtained, but both represented truncated versions of the putative open reading frame. A third incomplete genomic copy of MdmaT was also identified upstream of the putative M. domestica period gene. The MdmaT sequences showed high identity to the transposable element Bmmar1 from the silkworm moth, Bombyx mori, and to previously unidentified sequences in the genome of Caenorhabditis elegans. A total of 16 copies of full-length maT sequences were identified in the C. elegans genome, representing three variants of the transposon, with 34%-100% identity amongst them. Twelve of the copies, named CemaT1, were virtually identical, with eight of them encoding a putative full length, intact transposase. Secondary structure predictions and phylogenetic analyses confirm that maT elements belong to the mariner-Tc1 superfamily of transposons, but their intermediate sequence and predicted structural characteristics suggest that they belong to a unique clade, distinct from either mariner-like or Tc1-like elements.