Preparation of novel mercury-doped silver nanoparticles film glassy carbon electrode and its application for electrochemical biosensor

A novel mercury-doped silver nanoparticles film glassy carbon (Ag/MFGC) electrode was prepared in this study. Electrochemical behaviors of cysteine on the Ag/MFGC electrode were investigated by electrochemical impedance spectroscopy and cyclic voltammetry (CV). The results indicated that cysteine could be strongly adsorbed on the surface of the Ag/MFGC electrode to form a thin layer. The doped electrode could catalyze the electrode reaction process of cysteine, and the cysteine displayed a pair of well-defined and nearly reversible CV peaks at the electrode in an acetate buffer solution (pH 5.0). The Ag/MFGC electrode was used for determination of cysteine by differential pulse voltammetry. The linear range was between 4.0x10(-7) and 1.3x10(-5) mol/L, with a detection limit of 1.0x10(-7) mol/L and a signal-to-noise ratio of 3. The relative standard deviation was 2.4% for seven successive determinations of 1.0x10(-5) mol/L cysteine. The determinations of cysteine in synthetic samples and urinal samples were carried out and satisfactory results were obtained. Amperometric application of the Ag/MFGC electrode as biosensors is proposed.     

Determination by fluorescence quenching of the environment of DNA crosslinks made by malondialdehyde

DNA crosslinks made by malondialdehyde are fluorescent. The fluorescence is quenched by collision or intercalation. A 3.3-fold higher concentration of the external (collision) quencher KI was required to cause 50% quenching of the fluorescence of the interstrand-DNA crosslinks than to cause 50% quenching of the fluorescence of the model compounds Val2MDA and the malondialdehyde-crosslinked heterodimer of GMP and CMP. Thus, the crosslinked nucleotide dimers in the DNA were shown to be 70% shielded from the solvent. Similarly, DNA-protein crosslinks made by malondialdehyde were shown to be 55% shielded. The internal (intercalation) quencher Ag+ enhanced the fluorescence of the DNA crosslinks at concentrations below 0.3 mM; higher concentrations quenched the fluorescence. Concentrations of Ag+ below 10 mM did not affect the fluorescence of the model compounds. The calculated dissociation constant for Ag+ was much less at pH 5 than at pH 7 or 9. The observed binding of Ag+ and its pH dependence suggest that pi-stacking of adjacent bases strengthens the binding of Ag+ to the crosslinks. These results indicate that the crosslinks are in the interior of the DNA, so they may not easily be recognized by a repair system.     

Oligonucleotide-stabilized fluorescent silver nanoclusters for sensitive detection of biothiols in biological fluids

In this work, we reported a simple and sensitive method to detect biothiols, such as cysteine (Cys), homocysteine (Hcy) and glutathione (GSH), using fluorescent silver nanoclusters (Ag NCs) stabilized by single-stranded DNA (DNA-Ag NCs) as probes. The photoluminescence intensity of DNA-Ag NCs was found to be quenched effectively with the increase of biothiols concentration due to the formed nonfluorescent coordination complex between DNA-Ag NCs and biothiols, resulting in the shift-to-red of emission wavelength. But the fluorescence of DNA-Ag NCs was not changed in the presence of other amino acids at 10-fold higher concentration. Satisfactory detection limits and linear relationships of Cys, GSH and Hcy were obtained, respectively. The resulted plots exhibited good linear relationships in the range from 8.0×10(-9) to 1.0×10(-7) mol L(-1) (R(2)=0.984) for Cys, 8.0×10(-9) to 1.0×10(-7) mol L(-1) (R(2)=0.983) for GSH, and 2.0×10(-6) to 6.0×10(-7) mol L(-1) (R(2)=0.999) for Hcy, respectively; the detection limits of Cys, GSH and Hcy were 4.0 nmol L(-1), 4.0 nmol L(-1), and 0.2 μmol L(-1), respectively. The method was successfully used for the detection of biothiols in human plasma samples.     

Quantitative characterization of the binding of fluorescently labeled colchicine to tubulin in vitro using fluorescence correlation spectroscopy

Fluorescence correlation spectroscopy (FCS) is a new technique that allows the determination of the diffusion constant of a fluorescent molecule in solution. Also, the binding of the fluorescent molecule to a target can be analyzed, if the difference in the diffusion coefficients of the free and bound ligand is sufficiently large. With FCS, the interaction between fluorescein-colchicine (FC) and tubulin has been studied in vitro. A fast and reversible binding is observed with an association constant at room temperature of (3.9 +/- 0.1) x 10(4) M-1. No competition with colchicine is seen, indicating that FCS reveals the existence of a new binding site on tubulin. FCS is not able to show the binding of FC to the original colchicine binding site, even though it exists, because the fluorescence of FC is strongly quenched upon binding to this site. This quenching is evident in spectrofluorometry experiments, revealing a slow binding of FC to tubulin that is subject to competition with colchicine. FCS allows the determination of the diffusion coefficients of both free and bound fluorescent colchicine which were found to be (2.6 +/- 0.2) x 10(-)10 and (2.0 +/- 0.2) x 10(-)11 m2 s-1, respectively. It can be concluded that fluorescent labeling, especially of small molecules, can interfere considerably with the binding behavior that is being studied. Although general qualitative effects in vivo are similar for colchicine and its fluorescein derivative, this quantitative study of the binding to tubulin presents a nuanced view, and the existence of a second binding site for FC can even explain some conflicting indications in the literature.     

Signal-on fluorescent sensor based on N-CQDs for the detection of glutathione in human serum and pharmaceutic preparation

Nitrogen-doped carbon quantum dots (N-CQDs) with citric acid and ethylenediamine as raw materials were synthesized by an efficient one-step strategy. The N-CQDs showed a special property that the fluorescence was quenched by Fe³⁺. The quenched fluorescence of N-CQDs could be recovered by glutathione (GSH). Therefore, a “signal-on” fluorescent sensor was developed to detect GSH. The fluorescent sensor could favorably avoid the interference of ascorbic acid, dopamine, glucose, oxidized glutathione, and other amino acids in the detecting process of GSH. The proposed sensor showed a great feature that GSH can be accurately detected in the range from 0.001 to 0.1?mol/L and can be applied to detect GSH in the human serum. Therefore, the proposed method has a promising application for monitoring the blood drug concentration of GSH in clinical studies.     

Flow cytometric analysis of bromodeoxyuridine-substituted cells stained with 33258 Hoechst.

This paper describes a flow-cytometric application of the quenching of fluorescence from 33258 Hoechst stained Chinese hamster ovary-line cells due to the incorporation of 5-bromo-deoxyuridine (BrdU) into the cellular deoxyribonucleic acid. Cells were grown for 24 hr in medium containing BrdU in concentrations ranging from 1 x 10(-8) to 1 x 10(-4) M. For each concentration we measured the average fluorescence as determined by flow cytometry, the extent of BrdU substitution and the effect of the BrdU on cell growth. We determined that a BrdU concentration of 1 x 10(-5) M resulted in sufficient substitution to quench the fluorescence from 33258 Hoechst by a factor of 4, allowing discrimination between cycling and noncycling cells. The extent of BrdU substitution after growth for 24 hr in this concentration of BrdU was 64%. These data indicate the feasibility of detecting deoxyribonucleic acid synthesis in whole cells using the 33258 Hoechst-BrdU methodology.     

Biomolecule-stabilized Au nanoclusters as a fluorescence probe for sensitive detection of glucose

In this work, biomolecule-stabilized Au nanoclusters were demonstrated as a novel fluorescence probe for sensitive and selective detection of glucose. The fluorescence of Au nanoclusters was found to be quenched effectively by the enzymatically generated hydrogen peroxide (H(2)O(2)). By virtue of the specific response, the present assay allowed for the selective determination of glucose in the range of 1.0×10(-5) M to 0.5×10(-3) M with a detection limit of 5.0×10(-6) M. The absorption spectroscopy, X-ray photoelectron spectroscopy (XPS) and fluorescence decay studies were then performed to discuss the quenching mechanism. In addition, we demonstrated the application of the present approach in real serum samples, which suggested its great potential for diagnostic purposes.     

Detection of silver(I) ions based on the controlled self-assembly of a perylene fluorescence probe

In the current work, we report a label-free fluorescence turn-on approach for the sensitive and selective sensing of Ag(+). A cationic perylene derivative, compound A, was used as the fluorescence probe. Compound A monomer is strongly fluorescent, and the fluorescence can be efficiently quenched through self-aggregation (self-assembly). A cytosine (C)-rich oligonucleotide, oligo-C, was employed. In the absence of Ag(+), oligo-C induced strong compound A aggregation due to electrostatic interactions in aqueous media, and very weak fluorescence signal was detected. However, in the presence of Ag(+), the specific interactions between oligo-C and Ag(+) induced hairpin structure formation of oligo-C through C-Ag(+)-C bonding interactions. Oligo-C binding to compound A aggregates was weakened; therefore, compound A monomer could be released and detected. The intensity of the fluorescence signal was directly related to the amount of Ag(+) added to the assay solution. Our method is highly sensitive-a limit of detection of 5nM was obtained-and also very selective. Ag(+) detection in complex sample mixtures was also demonstrated.     

综述——基于纳米材料的生物检测与医学诊断技术：贵金属团簇探针用于细胞成像及体外检测

贵金属团簇(noble metal clusters)是近年来新兴的一类荧光标记材料．由于具有物理尺寸小、荧光可调及生物相容性等优异的性能使得其在生物成像及检测领域都有着广泛的应用前景．本文讨论了贵金属团簇的制备和荧光特性,重点论述了其作为标记材料在细胞成像方面及体外检测应用中的研究进展．     

Caffeine clusters as transmitters of actinomycin antibiotics to DNA in solutions

Using the screening model of hypochromism, we showed that caffeine forms regular clusters consisting of 8-12 molecules. Addition of 7-aminoactinomycin D (7AAMD, a fluorescent analogue of actinomycin D) to the clusters leads to its sorption on the cluster surface. Photoexcitation of 7AAMD leads to its desorption from the surface into the aqueous phase and emission of a quantum. Fluorescence of 7AAMD in the presence of caffeine clusters is quenched by dinitrophenol more weakly than without clusters (the quenching constants are approximately 85 and approximately 280 M(-1), respectively) due to decreased steric availability of the antibiotic to the quencher. Addition of 7AAMD-caffeine complexes to DNA leads to a long-wavelength shift in the excitation spectrum and an increase in the fluorescence intensity along with a shift of the fluorescence spectrum to the short-wavelength area. This fact reflects redistribution of the antibiotic from the caffeine surface to the hydrophobic areas inside DNA. The English version of the paper: Russian Journal of Bioorganic Chemistry, 2008, vol. 34, no. 2; see also http://www.maik.ru.     

Silver‐doped graphite carbon nitride nanosheets as fluorescent probe for the detection of curcumin

Green fluorescent silver (Ag)‐doped graphite carbon nitride (Ag‐g‐C₃N₄) nanosheets have been fabricated by an ultrasonic exfoliating method. The fluorescence of the Ag‐g‐C₃N₄ nanosheets is quenched by curcumin. The fluorescence intensity decreases with the increase in the concentration of curcumin, indicating that the Ag‐g‐C₃N₄ nanosheets can function as a non‐toxic and facile fluorescence probe to detect curcumin. The fluorescence intensity of Ag‐g‐C₃N₄ nanosheets shows a linear relationship to curcumin in the concentration range 0.01–2.00 μM with a low detection limit of 38 nM. The fluorescence quenching process between curcumin and Ag‐g‐C₃N₄ nanosheets mainly is based on static quenching. The fluorescent probe has been successfully applied to analyse curcumin in human urine and serum samples with satisfactory results.     

A novel fluorescence competitive assay for glucose determinations by using a thermostable glucokinase from the thermophilic microorganism Bacillus stearothermophilus

We describe the use of a thermostable glucokinase in a novel competitive fluorescence assay for glucose. Glucokinase from Bacillus stearothermophilus (BSGK) was found to retain enzymatic activity in solution for over 20 days. The single cysteine residue in BSGK, which is near the active site, was labeled with a fluorescent probe, 2-(4-iodoacetamidoanilino)naphthalene-6-sulfonic acid. The ANS-labeled BSGK displayed a modest 25% decrease in the emission intensity upon binding glucose but no change in lifetime. To obtain a larger spectral change we developed a competitive assay for glucose using the intrinsic tryptophan fluorescence from BSGK and a resonance energy transfer (RET) acceptor-labeled sugar. The sugar-labeled acceptor quenched the BSGK tryptophan emission, and the quenching was reversed upon addition of glucose. The use of RET as the sensing mechanism can be easily extended to longer wavelengths for a more practical glucose sensor.     

Interaction of a protein, BSA, and a fluorescent probe, Mag-Indo-1, influence of EDTA and calcium on the equilibrium.

Recent findings indicate that ion-chelator probes with tetracarboxylate structure bind proteins. It was suggested that these fluorescent probes are valuable tools to gain information on protein structure through the energy transfer from tryptophans to the bound probe. Here, the binding of the fluorescent probe Mag-Indo-1 to bovine serum albumin (BSA) was investigated. Mag-Indo-1 was reported previously to serve as a probe for magnesium cations (Kd = 2.8 x 10(-4) M for zero ionic strength) which can also interact with calcium cations (Kd = 7.5 x 10(-7) M). Probe complexation with protein results in a shift of the emission fluorescence spectrum of the probe from 480 to 457 nm. We used emission fluorescence techniques to monitor this interaction. Computational resolution of the complex fluorescence spectra and a new software to test the theoretical model were developed in our laboratory. This enabled us to calculate the number of interacting sites and the dissociation constants. The fluorescent probe Mag-Indo-1 binds at a singular site with high affinity (Kd = 1.8 x 10(-7) M) to bovine serum albumin (BSA). Since proteins are known to bind several compounds unspecifically, we have studied the influence of EDTA as a competitor of the probe. Our findings suggest that the BSA binding site is identical for both Mag-Indo-1 and EDTA. We found that EDTA binds the protein with Kd = 0.4 x 10(-3) M. We studied the influence of calcium and found that Mag-Indo-1 does not bind the calcium free Apo-protein anymore.     

The sensitive determination of nucleic acids using a fluorescence-quenching method.

Experiments indicated that nucleic acids can quench the fluorescence of the Eu3+ -2-thenoyltrifluoroacetone (TTA)-1,10-phenanthroline (Phen) system. Based on this, a sensitive method for the determination of nucleic acids was proposed. The experiments indicated that under the optimum conditions, the quenched fluorescence intensity was in proportion to the concentration of nucleic acids in the range 1.0 x 10(-11)-1.0 x 10(-6) g/mL for yeast RNA (yRNA), 5.0 x 10(-11)-5.0 x 10(-7) g/mL for fish sperm (fsDNA) and 1.0 x 10(-10)-1.5 x 10(-6) g/mL for calf thymus DNA (ctDNA). Their detection limits were 3.0 x 10(-12), 4.0 x 10(-12) and 5.0 x 10(-11) g/mL, respectively. Therefore, the proposed method is one of the most sensitive methods available. The interaction between nucleic acids and Eu3+ -TTA-Phen is also discussed.     

Single-Molecule Imaging and Spectroscopy Using Fluorescence and Surface-Enhanced Raman Scattering

We extended single molecule fluorescence imaging and time-resolved fluorometry from the green to the violet-excitation regime to find feasibility of detecting and identifying fluorescent analogs of nucleic-acid bases at the single-molecule level. Using violet excitation, we observed fluorescent spotsfrom single complexes composed of a nucleotide analogue and the Klenow fragmentof DNA polymerase I. Also, we implemented Raman imaging and spectroscopy of adenine molecules adsorbed on Ag colloidal nanoparticles to find feasibility of identifying nucleic-acid bases at the single-molecule level. Surface enhanced Raman scattering (SERS) of adenine molecules showed an intermittent on-and-off behavior called blinking. The observation of blinking provides substantial evidence for detecting single adenine molecules.     

Inhibition of firefly luciferase by alkane analogues

We reported that anesthetics increased the partial molal volume of firefly luciferase (FFL), while long-chain fatty acids (LCFA) decreased it. The present study measured the actions of dodecanol (neutral), dodecanoic acid (negatively charged), and dodecylamine (positively charged) hydrophobic molecules on FFL. The interaction modes are measured by (1) ATP-induced bioluminescence of FFL and (2) fluorescence of 2-(p-toluidino)naphthalene-6-sulfonate (TNS). TNS fluoresces brightly in hydrophobic media. It competes with the substrate luciferin on the FFL binding. From the Scatchard plot of TNS titration, the maximum binding number of TNS was 0.83, and its binding constant was 8.27 x 10(5) M(-1). Job's plot also showed that the binding number is 0.89. From the TNS titration of FFL, the binding constant was estimated to be 8.8 x 10(5) M(-1). Dodecanoic acid quenched the TNS fluorescence entirely. Dodecanol quenched about 25% of the fluorescence, whereas dodecylamine increased it. By comparing the fluorescence of TNS and bioluminescence of FFL, the binding modes and the inhibition mechanisms of these dodecane analogues are classified in three different modes: competitive (dodecanoic acid), noncompetitive (dodecylamine), and mixed (dodecanol).     

Fluorescent sensors based on quinoline‐containing styrylcyanine: determination of ferric ions,hydrogen peroxide,and glucose,pH‐sensitive properties and bioimaging

A novel styrylcyanine‐based fluorescent probe 1 was designed and synthesized via facile methods. Ferric ions quenched the fluorescence of probe 1, whereas the addition of ferrous ions led to only small changes in the fluorescence signal. When hydrogen peroxide was introduced into the solution containing probe 1 and Fe²⁺, Fe²⁺ was oxidized to Fe³⁺, resulting in the quenching of the fluorescence. The probe 1/Fe²⁺ solution fluorescence could also be quenched by H₂O₂ released from glucose oxidation by glucose oxidase (GOD), which means that probe 1/Fe²⁺ platform could be used to detect glucose. Probe 1 is fluorescent in basic and neutral media but almost non‐fluorescent in strong acidic environments. Such behaviour enables it to work as a fluorescent pH sensor in both the solution and solid states and as a chemosensor for detecting volatile organic compounds with high acidity and basicity. Subsequently, the fluorescence microscopic images of probe 1 in live cells and in zebrafish were achieved successfully, suggesting that the probe has good cell membrane permeability and a potential application for imaging in living cells and living organisms. Copyright © 2014 John Wiley & Sons, Ltd.     

Spectrofluorimetric determination of dopamine using 1,5-bis(4,6-dicholro-1,3,5-triazinylamino) naphthalene.

A new fluorescent reagent, 1,5-bis(4,6-dichloro-1,3,5-triazinylamino)naphthalene, containing two active chlorines, was synthesized by a one-step reaction. Under the optimum conditions for the determination of dopamine, the enhanced fluorescence intensity is proportional to the dopamine concentration. The fluorescence intensity was measured at lambda(ex/em) = 400/460 nm, with and without dopamine. The linear range and detection limit for the determination of dopamine were 1.0 x 10(-7) mol/L-5.0 x 10(-5) mol/L and 4.0 x 10(-8) mol/L. This method is simple, practical, can afford good precision and accuracy and can be successfully applied to assess dopamine in injections and human serum samples.     

Superquenching as a detector for microsphere-based flow cytometric assays.

BACKGROUND: Fluorescent conjugated polymers display high fluorescence quantum yields and enhanced sensitivity to quenching (superquenching) by oppositely charged quenchers through energy or electron transfer. Fluorescent polymers and their quenchers are used in bead-based biosensor applications where the polymers are coated on particles. In this work, we investigate a detection method that utilizes superquenching on microspheres, which can be used for flow cytometric assays. METHODS: Microspheres were coated with the fluorescent cationic polyelectrolyte poly(p-phenylene-ethynylene) (PPE), and its superquenching by 9,10-anthraquinone-2,6-disulfonic acid (AQS) was examined by fluorometric methods in presence and in absence of a barrier to superquenching in the form of an anionic lipid bilayer. RESULTS: Flow cytometry detected superquenching of PPE on microspheres (MS-PPE) by AQS where high levels of reduction in fluorescence were observed. Adding different concentrations of AQS to MS-PPE yielded a Stern-Volmer quenching constant of 0.8x10(6) M-1. While forming an anionic lipid bilayer around the MS-PPE acted as a barrier to superquenching by AQS, disrupting the lipid bilayer allowed superquenching to take place. CONCLUSIONS: The sensitivity of flow cytometry in detecting fluorescence of microspheres and the amplified quenching sensitivity of fluorescent conjugated polymers both offer advantages over other fluorometric methods and conventional quenching detection. This study used superquenching of fluorescent polymers as a new tool in flow cytometry, thus combining the advantages offered by both method and detector. In addition, we employed the formation and the disruption of a supported lipid bilayer in mediating superquenching to offer new biosensing applications.     

Caffeine clusters as transmitters of actinomycin antibiotics to DNA in solution

Using the screening model of hypochromism, we showed that caffeine forms regular clusters consisting of 8–12 molecules. Addition of 7-aminoactinomycin D (7AAMD, a fluorescent analogue of actinomycin D) to the clusters leads to its sorption on the cluster surface. Photoexcitation of 7AAMD leads to its desorption from the surface into the aqueous phase and emission of a quantum. Fluorescence of 7AAMD in the presence of caffeine clusters is quenched by dinitrophenol more weakly than without clusters (the quenching constants are ～ 85 and ～280 M^?1, respectively) due to decreased steric availability of the antibiotic to the quencher. Addition of 7AAMD-caffeine complexes to DNA leads to a long-wavelength shift in the excitation spectrum and an increase in the fluorescence intensity along with a shift of the fluorescence spectrum to the short-wavelength area. This fact reflects redistribution of the antibiotic from the caffeine surface to the hydrophobic areas inside DNA.