Cloning of replication, incompatibility, and stability functions of R plasmid NR1.

The region of R plasmid NR1 that is capable of mediating autonomous replication was cloned by using EcoRI, SalI, and PstI restriction endonucleases. The only EcoRI fragment capable of mediating autonomous replication in either a pol+ or a polA host was fragment B. SalI fragment E joined in native orientation with the part of SalI fragment C that overlapped with EcoRI fragment B, and also two contiguous PstI fragments of sizes 1.6 and 1.1 kilobases from EcoRI fragment B-mediated autonomous replication. When these individual SalI fragments were cloned onto plasmid pBR313 or the individual PstI fragments were cloned onto plasmid pBR322, none of these single fragments could rescue the replication of the ColE1-like vectors in a polA host, even in the presence of a compatible "helper" plasmid derived from a copy mutant of NR1. In contrast to the results reported for closely related R plasmid R6, EcoRI fragment A of NR1 could not rescue the replication of ColE1 derivative RSF2124 in a polA(Am) mutant or in a polA(Ts) mutant at the restrictive temperature. Although capable of autonomous replication, EcoRI fragment B of NR1 (or smaller replicator fragments cloned from it by using other restriction enzymes) was not stably inherited in the absence of selection for the recombinant plasmid. When EcoRI fragment B was ligated to EcoRI fragment A of NR1, the recombinant plasmid was stable. Thus, EcoRI fragment A contained a stability (stb) function. The stb function did not act in trans since EcoRI fragment B was not stably inherited when a ColE1 derivative (RSF2124) ligated to EcoRI fragment A was present in the same cell. A cointegrate plasmid consisting of EcoRI fragment B of NR1 ligated to RSF2124 was also not stably inherited, whereas only EcoRI fragment B was unstable when both RSF2124 and EcoRI fragment B coexisted as autonomous plasmids in the same cell. The incompatibility gene of NR1 was shown to be located within the region of overlap between SalI fragment E and the PstI 1.1-kilobase fragment. A copy mutant of NR1 (called pRR12) was found to have greatly reduced incompatibility with NR1; this Inc- phenotype is cis dominant.     

DnaA protein is not essential for replication of IncFII plasmid NR1.

By transformation of dnaA null mutant host cells that are suppressed either by an rnh mutation or by chromosomal integration of a mini-R1 plasmid, it was shown that replication of miniplasmids composed of the NR1 minimal replicon had no absolute dependence upon DnaA protein. In addition, the suppression of the dnaA null mutation by the integrated mini-R1, which is an IncFII relative of NR1, was found to be sensitive to the expression of IncFII-specific plasmid incompatibility. This suggests that the integrative suppression by mini-R1 is under the control of the normal IncFII plasmid replication circuitry. Although NR1 replication had no absolute requirement for DnaA, the copy numbers of NR1-derived miniplasmids were lower in dnaA null mutants, and the plasmids exhibited a much reduced stability of inheritance during subculture in the absence of selection. This suggests that DnaA protein may participate in IncFII plasmid replication in some auxiliary way, such as by increasing the efficiency of formation of an open initiation complex at the plasmid replication origin. Such an auxiliary role for DnaA in IncFII replication would be different from that for replication of most other plasmids examined, for which DnaA has been found to be either essential or unimportant.     

Incompatibility mutants of IncFII plasmid NR1 and their effect on replication control

DNA from the replication control region of plasmid NR1 or of the Inc- copy mutant pRR12 was cloned into a pBR322 vector plasmid. These pBR322 derivatives were mutagenized in vitro with hydroxylamine and transformed into Escherichia coli cells that harbored either NR1 or pRR12. After selection for the newly introduced pBR322 derivatives only, those cells which retained the unselected resident NR1 or pRR12 plasmids were examined further. By this process, 134 plasmids with Inc- mutations in the cloned NR1 or pRR12 DNA were obtained. These mutants fell into 11 classes. Two of the classes had plasmids with deletions or insertions in the NR1 DNA and were not examined further. Plasmids with apparent point mutations were classified by examining (i) their ability to reconstitute a functional NR1-derived replicon (Rep+ or Rep-), (ii) the copy numbers of the Rep+ reconstituted replicons, (iii) the cross-reactivity of incompatability among the various mutant classes and parental plasmids, and (iv) the trans effects of the mutants on the copy number and stable inheritance of a coresident plasmid.     

Insertion and deletion mutations in the repA4 region of the IncFII plasmid NR1 cause unstable inheritance.

Mutants of IncFII plasmid NR1 that have transposons inserted in the repA4 open reading frame (ORF) are not inherited stably. The repA4 ORF is located immediately downstream from the replication origin (ori). The repA4 coding region contains inverted-repeat sequences that are homologous to the terC inverted repeats located in the replication terminus of the Escherichia coli chromosome. The site of initiation of leading-strand synthesis for replication of NR1 is also located in repA4 near its 3' end. Transposon insertions between ori and the right-hand terC repeat resulted in plasmid instability, whereas transposon insertions farther downstream did not. Derivatives that contained a 35-bp frameshift insertion in the repA4 ORF were all stable, even when the frameshift was located very near the 5' end of the coding region. This finding indicates that repA4 does not specify a protein product that is essential for plasmid stability. Examination of mutants having a nest of deletions with endpoints in or near repA4 indicated that the 3' end of the repA4 coding region and the site of leading-strand initiation could be deleted without appreciable effect on plasmid stability. Deletion of the pemI and pemK genes, located farther downstream from repA4 and reported to affect plasmid stability, also had no detectable effect. In contrast, mutants from which the right-hand terC repeat, or both right- and left-hand repeats, had been deleted were unstable. None of the insertion or deletion mutations in or near repA4 affected plasmid copy number. Alteration of the terC repeats by site-directed mutagenesis had little effect on plasmid stability. Plasmid stability was not affected by a fus mutation known to inactivate the termination function. Therefore, it appears that the overall integrity of the repA4 region is more important for stable maintenance of plasmid NR1 than are any of the individual known features found in this region.     

The incompatibility product of IncFII R plasmid NR1 controls gene expression in the plasmid replication region.

The incompatibility properties of IncFII R plasmid NR1 were compared with those of two of its copy number mutants, pRR12 and pRR21. pRR12 produced an altered incompatibility product and also had an altered incompatibility target site. The target site appeared to be located within the incompatibility gene, which is located more than 1,200 base pairs from the plasmid origin of replication. The incompatibility properties of pRR21 were indistinguishable from those of NR1. Lambda phages have been constructed which contain the incompatibility region of NR1 or of one of its copy mutants fused to the lacZ gene. In lysogens constructed with these phages, beta-galactosidase was produced under the control of a promoter located within the plasmid incompatibility region. Lysogens containing prophages with the incompatibility regions from pRR12 and pRR21 produced higher levels of beta-galactosidase than did lysogens containing prophages with the incompatibility region from the wild-type NR1. The introduction into these inc-lac lysogens of pBR322 plasmids carrying the incompatibility regions of the wild-type or mutant plasmids resulted in decreased levels of beta-galactosidase production. For a given lysogen, the decrease was greater when the pBR322 derivative expressed a stronger incompatibility toward the plasmid from which the fragment in the prophage was derived. This suggested that the incompatibility product acts on its target to repress gene expression in the plasmid replication region.     

Analysis of elements involved in pseudoknot-dependent expression and regulation of the repA gene of an IncL/M plasmid

Replication of the IncL/M plasmid pMU604 is controlled by a small antisense RNA molecule (RNAI), which, by inhibiting the formation of an RNA pseudoknot, regulates translation of the replication initiator protein, RepA. Efficient translation of the repA mRNA was shown to require the translation and correct termination of the leader peptide, RepB, and the formation of the pseudoknot. Although the pseudoknot was essential for the expression of repA, its presence was shown to interfere with the translation of repB. The requirement for pseudoknot formation could in large part be obviated by improving the ribosome binding region of repA, either by replacing the GUG start codon by AUG or by increasing the spacing between the start codon and the Shine-Dalgarno sequence (SD). The spacing between the distal pseudoknot sequence and the repA SD was shown to be suboptimal for maximal expression of repA.     

Importance of the C terminus of plasmid Rts1 RepA protein for replication and incompatibility of the plasmid.

RepA protein, essential for replication of plasmid Rts1, was found to bind in vivo immediately upstream of the repA promoter in studies with mini-Rts1 derivatives with deletions in the upstream region of repA. We constructed another series of repA mutants that would encode RepA derivatives containing oligopeptide substitutions in place of the carboxyl-terminal six amino acids. These modified RepA proteins could not activate ori (Rts1) at all and showed various degrees of incompatibility, or no incompatibility, toward a mini-Rts1 plasmid. These results suggest that the carboxyl-terminal six (or fewer) amino acids of RepA are important for exerting replication and incompatibility functions. One of the RepA derivatives, which showed an evident incompatibility without initiating replication, was examined for its ability to repress the repA gene.     

Control of replication in I-complex plasmids

The closely related plasmids that make up the I-complex group and the more distantly related IncL/M plasmids regulate the frequency of initiation of their replication by controlling the efficiency of translation of the rate limiting replication initiator protein, RepA. Translation initiation of repA is dependent on the formation of a pseudoknot immediately upstream of its Shine-Dalgarno sequence. Formation of this pseudoknot involves base pairing between two complementary sequences in the repA mRNA and requires that the secondary structure sequestering the distal sequence be disrupted by movement of the ribosome translating and terminating a leader peptide, whose coding sequence precedes and overlaps that of repA. Expression of repA is controlled by a small antisense RNA, RNAI, which on binding to its complementary target in the repA mRNA not only pre-empts formation of the pseudoknot, but also inhibits translation of the leader peptide. The requirement that translation of the leader peptide be completed for the pseudoknot to form increases the time available for the inhibitory interaction of RNAI with its target, so that at high copy number the frequency of pseudoknot formation is lowered, reducing the proportion of repA mRNA that are translated. At low copy number, when concentration of RNAI is low, repA is translated with increased frequency, leading to increased frequency of plasmid replication.     

Control of replication of plasmid R1: the intergenic region between copA and repA modulates the level of expression of repA

The RepA protein of plasmid R1 is rate-limiting for initiation of R1 replication. Its synthesis is mainly regulated by interactions of the antisense RNA, CopA, with the leader region of the RepA mRNA, CopT. This work describes the characterization of several mutants with sequence alterations in the intergenic region between the copA gene and the repA reading frame. The analysis showed that most of the mutations led both to a decrease in stability of maintenance of mini-R1 derivatives and to lowered repA expression assayed in translational repA-lacZ fusion constructs. Destruction of the copA gene and replacement of the upstream region by the tac promoter in the latter constructs indicated that these mutations per se alter the expression of repA. In addition, we show that particular mutations in this region can directly affect CopA-mediated control, either by changing the kinetics of interaction of CopA RNA with the RepA mRNA and/or by modifying the activity of the copA promoter. These data indicate the importance of the region analysed in the process that controls R1 replication.     

Pseudoknot-dependent translational coupling in repBA genes of the IncB plasmid pMU720 involves reinitiation

Replication of the IncB miniplasmid pMU720 requires synthesis of the replication initiator protein, RepA, whose translation is coupled to that of a leader peptide, RepB. The unusual feature of this system is that translational coupling in repBA has to be activated by the formation of a pseudoknot immediately upstream of the repA Shine-Dalgarno sequence. A small antisense RNA, RNAI, controls replication of pMU720 by interacting with repBA mRNA to inhibit expression of repA both directly, by preventing formation of the pseudoknot, and indirectly, by inhibiting translation of repB. The mechanism of translational coupling in repBA was investigated using the specialized ribosome system, which directs a subpopulation of ribosomes that carry an altered anti-Shine-Dalgarno sequence to translate mRNA molecules whose Shine-Dalgarno sequences have been altered to be complementary to the mutant anti-Shine-Dalgarno sequence. Our data indicate that translation of repA involves reinitiation by the ribosome that has terminated translation of repB. The role of the pseudoknot in this process and its effect on the control of copy number in pMU720 are discussed.     

Structural analysis of late intermediate complex formed between plasmid ColIb-P9 Inc RNA and its target RNA. How does a single antisense RNA repress translation of two genes at different rates?

The antisense Inc RNA encoded by the IncIalpha ColIb-P9 plasmid replicon controls the translation of repZ encoding the replication initiator and its leader peptide repY at different rates with different mechanisms. The initial loop-loop base pairing between Inc RNA and the target in the repZ mRNA leader inhibits formation of a pseudoknot required for repZ translation. A subsequent base pairing at the 5' leader of Inc RNA blocks repY translation. To delineate the molecular basis for the differential control, we analyzed the intermediate complexes formed between RepZ mRNA and Inc RNA(54), a 5'-truncated Inc RNA derivative. We found that the initial base pairing at the loops transforms into a more stable intermediate complex by its propagation in both directions. The resulting extensive base pairing indicates that the inhibition of the pseudoknot formation is established at this stage. Furthermore, the region of extensive base pairing includes bases different in related plasmids showing different incompatibility. Thus, the observed extensive base pairing is important for determining the incompatibility of the low-copy-number plasmids. We discuss the evolution of replication control systems found in IncIalpha, IncB, and IncFII group plasmids.     

Mutations affecting translational coupling between the rep genes of an IncB miniplasmid.

The nature of translational coupling between repB and repA, the overlapping rep genes of the IncB plasmid pMU720, was examined. Mutations in the start codon of the promoter proximal gene, repB, reduced the efficiency of translation of both rep genes. Moreover, there was no independent initiation of repA translation in the absence of repB translation. The position of the repB stop codon was crucial for the efficient expression of repA, with the wild-type positioning being optimal. Translational coupling was found to be totally dependent on the formation of a pseudoknot structure. A model which invokes formation of a pseudoknot to facilitate initiation of repA is proposed.