A new Rhodamine B-based ‘on–off’ chemical sensor with high selectivity and sensitivity toward Fe3+ and its imaging in living cells

A new fluorescent chemosensor based on a Rhodamine B and pyrrole conjugate (RBPY) has been designed and synthesized. UV–vis absorption and fluorescence spectroscopic studies show that RBPY exhibits a high selectivity and sensitivity toward Fe³⁺ among many other metal cations in a MeOH/H₂O solution (3:2, v/v, pH 7.10, HEPES buffer, 0.1 mM) by forming a 1:1 complex with Fe³⁺. Furthermore, results reveal that the formation of the RBPY–Fe³⁺ complex is fully reversible in the presence of sulfide anions and could also be used as an efficient sensor for S²⁻. Importantly, fluorescence microscopy experiments further demonstrated that RBPY can be utilized as a fluorescent probe for the detection of Fe³⁺ in human liver (L-02) cells.     

Rhodamine-based “turn-on” fluorescent probe with high selectivity for Fe imaging in living cells

A rhodamine-based “turn-on” fluorescent probe 1 was synthesized with high yield. The recognizing behavior displays high selectivity of 1 toward Fe²⁺ with a 2:1 complex, and 1 exhibits a stable response for Fe²⁺ over a concentration range from 2 μM to 24 μM. Most importantly, probe is hardly interfered by other transition metal ions. Their fluorescent enhancement is observed in the presence of Fe²⁺ because of the ring-open interactions of spirocyclic. All measurements are made in PBS buffer environments simulating biological conditions to make them suitable candidates for fluorescent labeling of biological systems. Confocal laser scanning microscopy experiments have proven that probe can be used to monitor Fe²⁺ in living cells.     

A novel colorimetric fluorescence sensor for Fe3+ based on quinoline Schiff base

A novel fluorescent sensor bearing a quinoline and an anisidine moiety has been developed for highly selective detection of Fe³⁺, which shows photo‐induced electron transfer (PET) behavior induced by Fe³⁺. Binding of Fe³⁺ to the sensor induced the electron of C = N group transfer from quinoline to iron, the result exhibits fluorescent enhancement. With the features of easy synthesis, simple structural skeleton and excellent sensing ability, the newly synthesized chemosensor also applied as a highly selective fluorescent probe in complex samples containing various competitive metal ions. The probe could fulfill various needs in biological and environmental fields.     

Dual-rhodamine urea derivative, a novel chemidosimeter for Hg(II) and its application in imaging Hg(II) in living cells

Abstract  The synthesis and spectral properties of a chemidosimeter 1,4-di[2-(6-ethylamino-3-ethylimino-2,7-dimethyl-3H-xanthen-9-yl) benzoic acid (aminomethyl)-3-phenylthiourea] benzene (1) for Hg(II) ions are reported, and it has been demonstrated that 1 can be used as a fluorescent probe for monitoring Hg(II) ions in living cells. Graphical abstract  A highly sensitive fluorescent probe (1) was developed as a fluorescent and colorimetric chemodosimeter in dimethyl sulfoxide/methanol solution with a broad pH range (pH 5–10) and high selectivity toward Hg²⁺ ions but no significant response toward other competitive cations. Furthermore, by means of confocal laser scanning microscopy experiments, it is demonstrated that 1 can be used as a fluorescent probe for monitoring Hg²⁺ in living cells. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.

Highly selective and sensitive ‘on–off’ fluorescent chemosensor for Fe3+ ions crafted by benzofuran moiety in both experimental and theoretical methods

A benzofuran glycinamide-based chemosensor, 3-(2-([4-fluorobenzyl]amino)acetamido)benzofuran-2-carboxamide ( BGA ) was developed and synthesized for the selective and sensitive detection of Fe³⁺ ions. The photophysical properties of the probe BGA were studied using UV–visible light absorption and fluorescence spectrophotometers. The chemosensor BGA showed a marked ‘on–off’ fluorescence response towards Fe³⁺ ions in the presence of other metal ions in DMSO/H₂O solution (9/1, v/v). The very low limits of detection (LOD) were calculated to be 10 nM and 43 nM using UV–visible light absorption and fluorescence spectrophotometers, respectively. Job's plot analysis revealed the formation of a BGA -Fe³⁺ complex with a 1:1 binding stoichiometry ratio using UV–visible light spectroscopy. The sensing mechanism was also demonstrated using density functional theory calculation.     

Quinolinotriazole-β-cyclodextrin and its adamantanecarboxylic acid complex as efficient water-soluble fluorescent Cd2+ sensors

A novel β-cyclodextrin derivative 1 bearing 8-hydroxyquinolino and triazole groups was synthesized in satisfactory yield by ‘click chemistry’. With a good water solubility up to 0.03 mol/L, 1 exhibited an effective switch-on fluorescence response to Cd²⁺ over other common metal ions under physiological conditions. Studies on the recognition mechanism indicated that the cooperative coordination of Cd²⁺ with both the 8-hydroxyquinolino moiety excluded from the β-CD cavity and the triazole moiety was a crucial and basic factor to achieve the fluorescent sensing process. Significantly, spectrophotometric studies also demonstrated that, after inclusion complexation with 1-adamantanecarboxylic acid sodium salt (AdCA), the resultant 1/AdCA system gave a more effective fluorescent sensing to Cd²⁺ through a cyclodextrin/substrate/Cd²⁺ triple binding mode.     

Fluorescence ‘on-off-on’ chemosensor for sequential recognition of Fe3+ and Hg2+ in water based on tetraphenylethylene motif

A novel selective and sensitive fluorescence ‘on-off-on’ probe based on tetraphenylethylene (TPE) motif for sequential recognition of Fe³⁺ and Hg²⁺ in water has been developed. Especially the complex 6-Fe³⁺ could behave as a ‘turn on’ fluorescent sensor over a wide-range pH value for detection of Hg²⁺. The selectivity of this complex for Hg²⁺ over other heavy and transition metal ions is excellent, and its sensitivity for Hg²⁺ is at 2 ppb in water.     

Fluorescent sensors based on quinoline‐containing styrylcyanine: determination of ferric ions,hydrogen peroxide,and glucose,pH‐sensitive properties and bioimaging

A novel styrylcyanine‐based fluorescent probe 1 was designed and synthesized via facile methods. Ferric ions quenched the fluorescence of probe 1, whereas the addition of ferrous ions led to only small changes in the fluorescence signal. When hydrogen peroxide was introduced into the solution containing probe 1 and Fe²⁺, Fe²⁺ was oxidized to Fe³⁺, resulting in the quenching of the fluorescence. The probe 1/Fe²⁺ solution fluorescence could also be quenched by H₂O₂ released from glucose oxidation by glucose oxidase (GOD), which means that probe 1/Fe²⁺ platform could be used to detect glucose. Probe 1 is fluorescent in basic and neutral media but almost non‐fluorescent in strong acidic environments. Such behaviour enables it to work as a fluorescent pH sensor in both the solution and solid states and as a chemosensor for detecting volatile organic compounds with high acidity and basicity. Subsequently, the fluorescence microscopic images of probe 1 in live cells and in zebrafish were achieved successfully, suggesting that the probe has good cell membrane permeability and a potential application for imaging in living cells and living organisms. Copyright © 2014 John Wiley & Sons, Ltd.     

Rhodamine-based ‘turn-on’ fluorescent probe for Cu(II) and its fluorescence imaging in living cells

A novel rhodamine spirolactam derivative 3′,6′-Bis(diethylamino)-2-(2-hydroxyethylamino) spiro[isoindoline-1,9′-xanthen]-3-one (RO1) was synthesized, and characterized by high-resolution mass spectrometry (HRMS), X-ray crystallography, Infrared spectroscopy (IR), and ¹H NMR and ¹³C NMR spectroscopy. RO1 exhibited highly sensitive and exclusively selective fluorescence response toward Cu²⁺ over other metal ions with a detection limit of 0.56 ppb in mixed aqueous solution. The fluorescence was pH-independent in the wide range pH 3.1–11.6. The turn-on fluorescence enhancement of the probe is based on Cu²⁺ induced ring-opening mechanism of the rhodamine spirolactam. Moreover, by means of fluorescence microscopy experiments, it was demonstrated that RO1 could monitor trace Cu²⁺ changes by live cell imaging.     

Three colorimetric and off–on fluorescent chemosensors for Fe3+ in aqueous media

Three Rhodamine B derivatives were synthesized and characterized by ESI‐MS, NMR, HR‐MS and IR. The probes exhibit high selectivity and sensitivity towards Fe³⁺ over other metal ions in CH₃CN–water. Upon the addition of Fe³⁺, the spirocyclic ring of the probe was opened and a significant enhancement of visible color and fluorescence within the range of 540–700 nm was observed. The colorimetric and fluorescent response to Fe³⁺ can be conveniently detected even by the naked eye, which provides a facile method for the visual detection of Fe³⁺. Job's plot, fluorescence titration and MS indicated the formation of 1:2 complexes between the probes and Fe³⁺. The reversibility of the reaction establishes the potential of these probes as chemosensors for Fe³⁺ detection. Copyright © 2013 John Wiley & Sons, Ltd.     

Colorimetric chiral fluorescent sensors for Eu3+ and sequential enantioselective sensing of malate anion

Novel phenanthroline Schiff base fluorescent sensors L1 , L2 , and D1 were designed and synthesized. The sensing abilities of the compounds in the presence of metal cations (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ba²⁺, Ca²⁺, Mn²⁺, Pb²⁺, Hg²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺, Cr³⁺, Fe³⁺, Fe²⁺, Al³⁺, and Eu³⁺) were studied by UV‐vis and fluorescent spectroscopy. The compounds L1 , L2 , and D1 could act as Eu³⁺ ion turn‐off fluorescent sensors based on ligand‐to‐metal binding mechanism in DMSO‐H₂O solution (v/v = 1:1, 10 mM Tris, pH = 7.4). Additionally, the L1 –Eu³⁺ and D1 –Eu³⁺ complexes could be applied as turn‐on enantioselective sensors sensing of malate anion isomers with color changes. Furthermore, biological experiments using living PC‐12 cells demonstrated that L1 and D1 had excellent membrane permeability and could be used as effective fluorescent sensors for detecting Eu³⁺ and malate anion in living cells.     

Facile synthesis of anthracene-appended amino acids as highly selective and sensitive fluorescent Fe3+ ion sensors

We designed new fluorescent chemical sensors for Fe³⁺ ion detection, by conjugating amino acids as receptors into an anthracene fluorophore. The conjugates were synthesized in solid phase by Fmoc-chemistry. Fluorescence sensors containing Asp (1) and Glu (2) both had exclusive selectivity for Fe³⁺ in 100% aqueous solution and in a mixed organic–aqueous solvent system. Other metal ions did not interfere with the detection ability of the sensors for Fe³⁺. The sensors detect Fe³⁺ ions via a chelation-enhanced fluorescent quenching effect. The binding affinity, reversible monitoring, and pH sensitivity of the sensors were investigated. In addition, detection of fluoride ion among halide ions was done by a chemosensing ensemble method with 1–Fe³⁺ and 2–Fe³⁺ complexes.     

Metal ion-induced assembly of dipeptide-attached perylenediimide for fluorometric “turn on” detection of biologically important small molecule

A dipeptide-appended perylenediimide (PDI-CFF) fluorescent molecule was designed, synthesized, and characterized. Though the molecule does not dissolve in any individual solvent, it dissolves well in an organic/water mixed solvent system such as tetrahydrofuran/water. This new fluorescent molecule was self-assembled in a tetrahydrofuran/water mixture to form both nanofibrous network structures and a nano ring structure. It has shown nanofibril morphology by the interactions with ferric ions (PDI-CFF/Fe³⁺ system) with diminishing fluorescent property. Interestingly, L-ascorbic acid (LAA) interacts with the PDI-CFF/Fe³⁺ system, showing turn-on fluorescence. Another interesting feature is that the minimum detection limits for Fe³⁺ ions and LAA are at the submicromolar levels of 6.2 × 10⁻⁸ and 3 × 10⁻⁸ M, respectively. Moreover, the fluorescent (10 μM) signals can be monitored by the naked eye under handheld UV lamp irradiation at 365 nm, and this is very convenient for the real application. In this study, the molecule offers the opportunity for processing these sequential fluorescence responses in order to fabricate a implication logic gate that includes NOT, AND, and OR simple logic gates using chemical stimuli (ferric ions and LAA) as inputs and fluorescence emission at 536 nm as output. The detailed mechanism of interactions of Fe³⁺ with PDI-CFF and LAA with the PDI-CFF/Fe³⁺ system is vividly studied by using Fourier transform infrared (FT-IR) analysis and fluorescence. Moreover, this new molecule was reusable for several times without significant loss of its activity. The construction of logic gates using biologically important molecules/ions holds future promise for the design and development of new bio-logic gates.     

‘Turn‐on’ fluorescent chemosensors based on naphthaldehyde‐2‐pyridinehydrazone compounds for the detection of zinc ion in water at neutral pH

A series of naphthaldehyde‐2‐pyridinehydrazone derivatives were discovered to display interesting ‘turn‐on’ fluorescence response to Zn²⁺ in 99% water/DMSO (v/v) at pH 7.0. Mechanism study indicated that different substituent groups in the naphthaldehyde moiety exhibited significant influence on the detection of Zn²⁺. The electron rich group resulted in longer fluorescence wavelengths but smaller fluorescence enhancement for Zn²⁺. Among these compounds, 1 showed the highest fluorescence enhancement of 19‐fold with the lowest detection limit of 0.17 μmol/L toward Zn²⁺. The corresponding linear range was at least from 0.6 to 6.0 μmol/L. Significantly, 1 showed an excellent selectivity toward Zn²⁺ over other metal ions including Cd²⁺.     

Facile synthesis,cytotoxicity and bioimaging of Fe3+ selective fluorescent chemosensor

The designing and development of fluorescent chemosensors have recently been intensively explored for sensitive and specific detection of environmentally and biologically relevant metal ions in aqueous solution and living cells. Herein, we report the photophysical results of alanine substituted rhodamine B derivative 3 having specific binding affinity toward Fe³⁺ with micro molar concentration level. Through fluorescence titration at 599 nm, we were confirmed that ligand 3 exhibited ratiometric fluorescence response with remarkable enhancement in emission intensity by complexation between 3 and Fe³⁺ while it appeared no emission in case of the competitive ions (Sc³⁺, Yb³⁺, In³⁺, Ce³⁺, Sm³⁺, Cr³⁺, Sn²⁺, Pb²⁺, Ni²⁺, Co²⁺, Cu²⁺, Ba²⁺, Ca²⁺, Mg²⁺, Ag⁺, Cs⁺, Cu⁺, K⁺) in aqueous/methanol (60:40, v/v) at neutral pH. However, the fluorescence as well as colorimetric response of ligand–iron complex solution was quenched by addition of KCN which snatches the Fe³⁺ from complex and turn off the sensor confirming the recognition process was reversible. Furthermore, bioimaging studies against L-929 cells (mouse fibroblast cells) and BHK-21 (hamster kidney fibroblast), through confocal fluorescence microscopic experiment indicated that ligand showed good permeability and minimum toxicity against the tested cell lines.     

A carbonothioate‐based highly selective fluorescent probe with a large Stokes shift for detection of Hg2+

Mercury (Hg) is one of the heavy metal pollutants in the environment. Even a very small amount of mercury can cause serious harm to human beings. Herein, we reported a new carbonothioate‐based fluorescent probe for the detection of Hg²⁺ without interference from other metal ions. This probe possessed a very large Stokes shift (192 nm), which could improve the detection sensitivity by minimizing the interferences resulted from self‐absorption or auto‐fluorescence. With the addition of Hg²⁺ to the probe solution, considerable fluorescence enhancement was observed. Additionally, the Hg²⁺ concentration of 0–16 μM and fluorescence intensity showed a good linear relationship (y = 22106× + 53108, R² = 0.9955). Finally, the proposed probe was used to detect Hg²⁺ in real water samples, and its result was satisfactory. Therefore, our proposed probe would provide a promising method for the determination of Hg²⁺ in the environment.     

A highly efficient and selective turn‐on fluorescent sensor for Hg2+, Ag+ and Ag nanoparticles based on a coumarin dithioate derivative

Based on chelation‐enhanced fluorescence, a new fluorescent coumarin derivative probe 3(1‐(7‐hydroxy‐4‐methylcoumarin)ethylidene)hydrazinecarbodithioate for Hg²⁺, Ag⁺ and Ag nanoparticles is reported. Fluorescent probe acts as a rapid and highly selective “off–on” fluorescent probe and fluorescence enhancement by factors 5 to12 times was observed upon selective complexation with Hg²⁺, Ag⁺ and Ag nanoparticles. The molar ratio plots indicated the formation of 1:1 complexes between Hg²⁺ and Ag⁺ with the probe. The linear response range covers a concentration range 0.1 × 10^–5–1.9 × 10^–5 mol/L, 0.1 × 10^–5–2.3 × 10^–5 mol/L and 0.146 × 10^–12–2.63 × 10^–12 mol/L for Hg²⁺, Ag⁺ and Ag nanoparticles, respectively. The interference effect of some anions and cations was also tested. Copyright © 2013 John Wiley & Sons, Ltd.     

Functionalized pyrene‐based AIEgens: synthesis,photophysical characterization and density functional theory studies

Three new pyrene‐based derivatives P1 , P2 and P3 with a substituted pyrazole were designed, synthesized and characterized using standard spectroscopic techniques. Ultraviolet–visible (UV–vis) spectroscopic studies for P1–P3 uncovered a finite bathochromic shift of the molecules in solvents of varying polarity. Photoluminescence (PL) studies revealed the significant fluorescence emission of all molecules in higher polar solvents such as MeOH and dimethylformamide (DMF). Fluorescence quantum yield studies demonstrated the importance of P3 possessing cyanofunctionality for imparting higher emission with a quantum yield of 0.36%. Ratiometric studies performed in a tetrahydrofuran (THF)/H₂O mixture indicated fluorescence enhancement with increasing overall percentage of water, confirming the aggregation‐induced emission effect. Cyclic voltammetry study of molecules P1–P3 revealed an irreversible oxidation peak and the band gaps were calculated to be 2.26 eV for P1 and 2.31 eV for P2 and P3 respectively. Density functional theory (DFT) studies performed on molecules P1–P3 validate the structure correlation of the molecules. Theoretically estimated highest occupied molecular orbital ( HOMO), lowest unoccupied molecular orbital (LUMO) and bandgap correlated well with the experimental values. Furthermore, time‐dependent (TD)DFT showed that the major contribution for the electronic transitions occurring in the system was governed by HOMO‐1 and LUMO+1 orbitals.     

Fluorescent sensors based on BODIPY derivatives for aluminium ion recognition: an experimental and theoretical study

Two BODIPY derivative sensors for metal ion recognition containing 10-(4-hydroxyphenyl) (L1) and 10-(3,4-dihydroxyphenyl) (L2) were synthesized in a one-pot reaction of benzaldehyde derivative and 2,4-dimethylpyrrole in the presence of trifluoroacetic acid as catalyst. The binding abilities between these sensors and 50 equivalents of Na⁺, K⁺, Ag⁺, Ca²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Al³⁺ and Cr³⁺ ions were studied using UV–vis and fluorescent spectroscopic methods. Of all the metal ions tested, Al³⁺ ion showed the greatest decrease in intensity in the spectra of the sensors, and therefore Al³⁺ ion forms the strongest complex. The binding abilities of BODIPY receptors with Na⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Al³⁺ ions were also investigated using density functional theory (DFT) calculations at B3LYP/LanL2DZ theoretical level. The calculated results point to the same conclusion. DFT calculations also provided the HOMO–LUMO energy levels, which can explain the spectrum change upon complexation.

On–off Bodipy chemosensor for recognition of iron(III) ion based on the inner filter effect and its applications in cellular and bacterial imaging

One strong fluorescent Bodipy‐containing derivative was synthesized and characterized using ¹H NMR, electrospray ionization mass spectrometry and elemental analysis. Its electrochemical and photophysical properties were investigated. In addition, the Bodipy derivative could be used as an on–off fluorescent probe for the detection of Fe³⁺ ions based on the inner filter effect because the absorption band of the Fe³⁺ ion overlaps the excitation band of Bodipy very well upon irradiation with UV light. Furthermore, the Bodipy‐based sensor has obvious advantages including simplicity, rapid response, high selectivity, sensitivity and a detection limit of 1.2 μmol/L, and has been demonstrated in real water samples including tap water, mineral water and water from Lake Tai. Moreover, the fluorescent probe could also be used as a probe for the determination of Fe³⁺ in cellular and bacterial imaging. Copyright © 2016 John Wiley & Sons, Ltd.