Laser Capture Microdissection - A Demonstration of the Isolation of Individual Dopamine Neurons and the Entire Ventral Tegmental Area

Laser capture microdissection (LCM) is used to isolate a concentrated population of individual cells or precise anatomical regions of tissue from tissue sections on a microscope slide. When combined with immunohistochemistry, LCM can be used to isolate individual cells types based on a specific protein marker. Here, the LCM technique is described for collecting a specific population of dopamine neurons directly labeled with tyrosine hydroxylase immunohistochemistry and for isolation of the dopamine neuron containing region of the ventral tegmental area using indirect tyrosine hydroxylase immunohistochemistry on a section adjacent to those used for LCM. An infrared (IR) capture laser is used to both dissect individual neurons as well as the ventral tegmental area off glass slides and onto an LCM cap for analysis. Complete dehydration of the tissue with 100% ethanol and xylene is critical. The combination of the IR capture laser and the ultraviolet (UV) cutting laser is used to isolate individual dopamine neurons or the ventral tegmental area when using PEN membrane slides. A PEN membrane slide has significant advantages over a glass slide as it offers better consistency in capturing and collecting cells, is faster collecting large pieces of tissue, is less reliant on dehydration and results in complete removal of the tissue from the slide. Although removal of large areas of tissue from a glass slide is feasible, it is considerably more time consuming and frequently leaves some residual tissue behind. Data shown here demonstrate that RNA of sufficient quantity and quality can be obtained using these procedures for quantitative PCR measurements. Although RNA and DNA are the most commonly isolated molecules from tissue and cells collected with LCM, isolation and measurement of microRNA, protein and epigenetic changes in DNA can also benefit from the enhanced anatomical and cellular resolution obtained using LCM.     

胶片吸附的激光显微切割技术及其在蛋白质组研究中的应用

组织显微切割在特定细胞亚群的比较研究中起着重要作用.新近发展的胶片吸附激光显微切割技术能从复杂的生物组织中快速准确地分离纯化出特定细胞亚群.在这项技术中,透明的乙烯乙酸乙烯基酯热塑性胶片覆盖于病理组织切片表面,CO₂激光束特异性作用于目的细胞群表面的胶片,胶片对细胞较强的吸附作用使得选择性自动移取目的细胞群成为可能.目前,这项技术已在蛋白质组分析中获得成功应用,并有望对其产生较深远的影响.     

Navigated laser capture microdissection as an alternative to direct histological staining for proteomic analysis of brain samples

Proteomic analysis of the brain is complicated by the need to obtain cells from specific anatomical regions, or nuclei. Laser capture microdissection (LCM) is a technique that is precise enough to dissect single cells within a tissue section, and thus could be useful for isolating specific brain nuclei for analysis. However, we and others have previously demonstrated that histological staining protocols used to guide LCM have detrimental effects on protein separation by two-dimensional electrophoresis (2-DE). Here we describe a new LCM method called navigated LCM. This microdissection method uses fixed but unstained tissue as starting material and thus enables us to avoid artifacts induced by tissue staining. By comparing 2-DE results obtained from fixed, unstained LCM brain tissue samples to those obtained from manually dissected samples, we demonstrated that this microdissection process gave similar protein recovery rates and similar resolution of protein spots on 2-DE gels. Moreover, matrix-assisted laser desorption/ionization-time of flight mass spectrometry analysis of selected spots from gels derived from control and fixed, LCM samples revealed that the fixation-LCM process had no effect on protein identification. Navigated LCM of tissue sections is therefore a practical and powerful method for performing proteomic studies in specifically defined brain regions.     

Optimizing Frozen Sample Preparation for Laser Microdissection: Assessment of CryoJane Tape-Transfer System?

Laser microdissection is an invaluable tool in medical research that facilitates collecting specific cell populations for molecular analysis. Diversity of research targets (e.g., cancerous and precancerous lesions in clinical and animal research, cell pellets, rodent embryos, etc.) and varied scientific objectives, however, present challenges toward establishing standard laser microdissection protocols. Sample preparation is crucial for quality RNA, DNA and protein retrieval, where it often determines the feasibility of a laser microdissection project. The majority of microdissection studies in clinical and animal model research are conducted on frozen tissues containing native nucleic acids, unmodified by fixation. However, the variable morphological quality of frozen sections from tissues containing fat, collagen or delicate cell structures can limit or prevent successful harvest of the desired cell population via laser dissection. The CryoJane Tape-Transfer System®, a commercial device that improves cryosectioning outcomes on glass slides has been reported superior for slide preparation and isolation of high quality osteocyte RNA (frozen bone) during laser dissection. Considering the reported advantages of CryoJane for laser dissection on glass slides, we asked whether the system could also work with the plastic membrane slides used by UV laser based microdissection instruments, as these are better suited for collection of larger target areas. In an attempt to optimize laser microdissection slide preparation for tissues of different RNA stability and cryosectioning difficulty, we evaluated the CryoJane system for use with both glass (laser capture microdissection) and membrane (laser cutting microdissection) slides. We have established a sample preparation protocol for glass and membrane slides including manual coating of membrane slides with CryoJane solutions, cryosectioning, slide staining and dissection procedure, lysis and RNA extraction that facilitated efficient dissection and high quality RNA retrieval from CryoJane preparations. CryoJane technology therefore has the potential to facilitate standardization of laser microdissection slide preparation from frozen tissues.     

2D and 3D Chromosome Painting in Malaria Mosquitoes

Fluorescent in situ hybridization (FISH) of whole arm chromosome probes is a robust technique for mapping genomic regions of interest, detecting chromosomal rearrangements, and studying three-dimensional (3D) organization of chromosomes in the cell nucleus. The advent of laser capture microdissection (LCM) and whole genome amplification (WGA) allows obtaining large quantities of DNA from single cells. The increased sensitivity of WGA kits prompted us to develop chromosome paints and to use them for exploring chromosome organization and evolution in non-model organisms. Here, we present a simple method for isolating and amplifying the euchromatic segments of single polytene chromosome arms from ovarian nurse cells of the African malaria mosquito Anopheles gambiae. This procedure provides an efficient platform for obtaining chromosome paints, while reducing the overall risk of introducing foreign DNA to the sample. The use of WGA allows for several rounds of re-amplification, resulting in high quantities of DNA that can be utilized for multiple experiments, including 2D and 3D FISH. We demonstrated that the developed chromosome paints can be successfully used to establish the correspondence between euchromatic portions of polytene and mitotic chromosome arms in An. gambiae. Overall, the union of LCM and single-chromosome WGA provides an efficient tool for creating significant amounts of target DNA for future cytogenetic and genomic studies.     

Protein Extraction of Formalin-fixed, Paraffin-embedded Tissue Enables Robust Proteomic Profiles by Mass Spectrometry

Global mass spectrometry (MS) profiling and spectral count quantitation are used to identify unique or differentially expressed proteins and can help identify potential biomarkers. MS has rarely been conducted in retrospective studies, because historically, available samples for protein analyses were limited to formalin-fixed, paraffin-embedded (FFPE) archived tissue specimens. Reliable methods for obtaining proteomic profiles from FFPE samples are needed. Proteomic analysis of these samples has been confounded by formalin-induced protein cross-linking. The performance of extracted proteins in a liquid chromatography tandem MS format from FFPE samples and extracts from whole and laser capture microdissected (LCM) FFPE and frozen/optimal cutting temperature (OCT)–embedded matched control rat liver samples were compared. Extracts from FFPE and frozen/OCT–embedded livers from atorvastatin-treated rats were further compared to assess the performance of FFPE samples in identifying atorvastatin-regulated proteins. Comparable molecular mass representation was found in extracts from FFPE and OCT-frozen tissue sections, whereas protein yields were slightly less for the FFPE sample. The numbers of shared proteins identified indicated that robust proteomic representation from FFPE tissue and LCM did not negatively affect the number of identified proteins from either OCT-frozen or FFPE samples. Subcellular representation in FFPE samples was similar to OCT-frozen, with predominantly cytoplasmic proteins identified. Biologically relevant protein changes were detected in atorvastatin-treated FFPE liver samples, and selected atorvastatin-related proteins identified by MS were confirmed by Western blot analysis. These findings demonstrate that formalin fixation, paraffin processing, and LCM do not negatively impact protein quality and quantity as determined by MS and that FFPE samples are amenable to global proteomic analysis. (J Histochem Cytochem 57:849–860, 2009)     

Optimized nLC-MS workflow for laser capture microdissected breast cancer tissue

Reliable sample preparation is of utmost importance for comparative proteome analysis, particularly when investigating minute amounts of clinical specimens, such as laser capture microdissected tumor tissue. In this study, we present an optimized nanoLC-MS workflow specifically for the analysis of laser capture microdissected breast cancer tissue. Analytical performance of different laser capture microdissection (LCM) functions available on the PALM system, time dependent trypsin digestion efficiency, effect of sample preparation and digestion time on peptide modification, semi-tryptic peptides and missed cleavages were evaluated. Our results show that microdissection from uncoated glass slides results in protein degradation; that protease and phosphatase inhibitors do not result in detectable improvement in number of peptides or semi-tryptic peptides; and that digestion time longer than four hours drastically reduces the number of missed cleavages, but also increases the number of unexpectedly modified peptides. Overalkylation was the most dominant side-reaction, which significantly increased overnight (P=0.05). The latter effect could almost completely be reverted by the use of a quenching agent (P=0.001). Taken together, our results show that it is of importance to carefully control sample handling steps so that reliable protein identification and quantitation can be performed within comparative proteomics studies using LCM. This article is part of a Special Issue entitled: Proteomics: The clinical link.     

High-quality RNA from cells isolated by laser capture microdissection

Laser capture microdissection (LCM) provides a rapid and simple method for procuring homogeneous populations of cells. However, reproducible isolation of intact RNAfrom these cells can be problematic; the sample may deteriorate before or during sectioning, RNA may degrade during slide staining and LCM, and inadequate extraction and isolation methods may lead to poor recovery. Our report describes an optimized protocol for preparation of frozen sections for LCM using the HistoGene Frozen Section Staining Kit. This slide preparation method is combined with the PicoPure RNA Isolation Kitfor extraction and isolation of RNA from low numbers of microdissected cells. The procedure is easy to perform, rapid, and reproducible. Our results show that the RNA isolated from the LCM samples prepared according to our protocol is of high quality. The RNA maintains its integrity as shown by RT-PCR detection of genes of different abundance levels and by electrophoretic analysis of ribosomal RNA. RNA obtained by this method has also been used to synthesize probes for interrogating cDNA microarray analyses to study expression levels of thousands of genes from LCM samples.     

激光捕获显微切割技术结合18O标记定量蛋白质组技术在胃癌标志物筛查中的应用研究

建立一种更加精确地分离鉴定胃癌特异肿瘤标志物的定量蛋白质组学技术．首先采用激光捕获显微切割技术(LCM)纯化胃腺癌细胞及胃黏膜良性上皮细胞,将裂解的样本总蛋白经过1D SDS-PAGE预分离,然后采用¹⁸O/¹⁶O分别标记两种样本酶切后的多肽混合物．结合纳升级液相色谱(Nano-HPLC-MS/MS)定量地鉴定胃癌细胞和胃黏膜良性上皮细胞的差异表达蛋白．共筛选出78个差异表达蛋白,其中42个蛋白质在胃癌组织中表达上调,36个蛋白质下调．Western blot 技术验证了其中几个差异蛋白(moesin, periostin, annexin A2, annexin A4)的表达,与蛋白质组学研究的结果一致．LCM技术结合¹⁸O稳定同位素标记的定量蛋白质组学技术,为研究胃癌发生机制、筛选胃癌的分子标志物提供了新的思路,亦为诸如胃癌等复杂体系蛋白质的分离鉴定提供了新的技术选择．     

Intracellular localization of oxidized low-density lipoproteins in atherosclerotic plaque cells revealed by electron microscopy combined with laser capture microdissection.

Recently, laser capture microdissection (LCM) has become a powerful tool for investigating the genome and protein contents of cells populating normal and pathologically altered tissues. The present work reports a technique for the preparation of tissue specimens for further LCM combined with electron microscopy. In this work, atherosclerotic plaque cells containing oxidized low-density lipoproteins (LDL) were microdissected from human carotid arteries and the intracellular distribution of oxidized LDL was examined, providing novel information about the association of microvesicles containing oxidized LDL with "lipid droplets" in macrophage foam cells.     

Molecular analysis of complex tissues is facilitated by laser capture microdissection

Every tissue contains heterogeneous cell populations. Laser capture microdissection (LCM) facilitates cell isolation from complex tissues followed by molecular analysis. LCM entails placing a transparent film over a tissue section or a cytological sample, visualizing the cells microscopically, and selectively adhering the cells of interest to the film with a focused pulse from an infrared laser. The film with the procured cells is then removed from the original sample and placed directly into DNA, RNA, or protein-extraction buffer for processing. LCM has revolutionized molecular analysis of complex tissues because it combines the topographic precision of microscopy with the power of molecular genetics, genomics, and proteomics. However, the success of molecular analysis still depends on the experimental design and requires the understanding of each technical step involved in specimen preparation. This review attempts to rationalize and demystify the choice of various technical options in upstream tissue processing supporting global analytical strategies.     

Preparative laser capture microdissection and single-pot cell wall material preparation: a novel method for tissue-specific analysis

In adaptation to their function the walls of plant cell display tissue-specific variations of composition according to their developmental stage, cell type and stress of various origin. It is therefore important to obtain a precise analytical data describing the cell wall composition with respect to these different factors. In the present work, laser capture microdissection (LCM) was used for isolating different tissues from the stem of Urtica dioica L. at a semi-preparative scale. The technique was associated for the first time to a one-pot sequential cell wall preparation and hydrolysis for the carbohydrate analysis of each cell type. The results demonstrate that the combination of LCM and micro-analytical methods can provide individual cell type composition and should improve our knowledge of the biochemical diversity of cell walls in plants. This approach will be of potential interest for the understanding of the effects of stress or genetic engineering on the composition of the cell walls.     

Application of laser-capture microdissection to analysis of gene expression in the testis

The isolation and molecular analysis of highly purified cell populations from complex, heterogeneous tissues has been a challenge for many years. Spermatogenesis in the testis is a particularly difficult process to study given the unique multiple cellular associations within the seminiferous epithelium, making the isolation of specific cell types difficult. Laser-capture microdissection (LCM) is a recently developed technique that enables the isolation of individual cell populations from complex tissues. This technology has enhanced our ability to directly examine gene expression in enriched testicular cell populations by routine methods of gene expression analysis, such as real-time RT-PCR, differential display, and gene microarrays. The application of LCM has however introduced methodological hurdles that have not been encountered with more conventional molecular analyses of whole tissue. In particular, tissue handling (i.e. fixation, storage, and staining), consumables (e.g. slide choice), staining reagents (conventional H&E vs. fluorescence), extraction methods, and downstream applications have all required re-optimisation to facilitate differential gene expression analysis using the small amounts of material obtained using LCM. This review will discuss three critical issues that are essential for successful procurement of cells from testicular tissue sections; tissue morphology, capture success, and maintenance of molecular integrity. The importance of these issues will be discussed with specific reference to the two most commonly used LCM systems; the Arcturus PixCell IIe and PALM systems. The rat testis will be used as a model, and emphasis will be placed on issues of tissue handling, processing, and staining methods, including the application of fluorescence techniques to assist in the identification of cells of interest for the purposes of mRNA expression analysis.     

Proteomic Sample Preparation from Formalin Fixed and Paraffin Embedded Tissue

Preserved clinical material is a unique source for proteomic investigation of human disorders. Here we describe an optimized protocol allowing large scale quantitative analysis of formalin fixed and paraffin embedded (FFPE) tissue. The procedure comprises four distinct steps. The first one is the preparation of sections from the FFPE material and microdissection of cells of interest. In the second step the isolated cells are lysed and processed using ''filter aided sample preparation'' (FASP) technique. In this step, proteins are depleted from reagents used for the sample lysis and are digested in two-steps using endoproteinase LysC and trypsin. After each digestion, the peptides are collected in separate fractions and their content is determined using a highly sensitive fluorescence measurement. Finally, the peptides are fractionated on ''pipette-tip'' microcolumns. The LysC-peptides are separated into 4 fractions whereas the tryptic peptides are separated into 2 fractions. In this way prepared samples allow analysis of proteomes from minute amounts of material to a depth of 10,000 proteins. Thus, the described workflow is a powerful technique for studying diseases in a system-wide-fashion as well as for identification of potential biomarkers and drug targets.