Following the formation of supported lipid bilayers on mica: a study combining AFM, QCM-D, and ellipsometry

Supported lipid bilayers (SLBs) are popular models of cell membranes with potential biotechnological applications and an understanding of the mechanisms of SLB formation is now emerging. Here we characterize, by combining atomic force microscopy, quartz crystal microbalance with dissipation monitoring, and ellipsometry, the formation of SLBs on mica from sonicated unilamellar vesicles using mixtures of zwitterionic, negatively and positively charged lipids. The results are compared with those we reported previously on silica. As on silica, electrostatic interactions were found to determine the pathway of lipid deposition. However, fundamental differences in the stability of surface-bound vesicles and the mobility of SLB patches were observed, and point out the determining role of the solid support in the SLB-formation process. The presence of calcium was found to have a much more pronounced influence on the lipid deposition process on mica than on silica. Our results indicate a specific calcium-mediated interaction between dioleoylphosphatidylserine molecules and mica. In addition, we show that the use of PLL-g-PEG modified tips considerably improves the AFM imaging of surface-bound vesicles and bilayer patches and evaluate the effects of the AFM tip on the apparent size and shape of these soft structures.     

A simple and effective sample preparation method for atomic force microscopy visualization of individual DNA molecules in situ

A simple, controllable and effective sample preparation method was established for atomic force microscopy (AFM) imaging of individual DNA molecules in aqueous solution. Firstly, magnesium ion (Mg²⁺) at a concentration of 5.0–10.0 mM as a positively charged bridge was transferred onto mica to immobilize DNA molecules. Then Mg²⁺-modified mica was used to investigate DNA molecules in any buffer without magnesium ion by AFM. AFM images demonstrated that DNA molecules can be successfully observed in solution with good resolution, reproducibility, and stability. Further, this DNA sample preparation method makes AFM successful to investigate DNA molecular interaction in situ and DNA/chitosan complex in gene delivery.     

DNA binding to mica correlates with cationic radius: assay by atomic force microscopy.

In buffers containing selected transition metal salts, DNA binds to mica tightly enough to be directly imaged in the buffer in the atomic force microscope (AFM, also known as scanning force microscope). The binding of DNA to mica, as measured by AFM-imaging, is correlated with the radius of the transition metal cation. The transition metal cations that effectively bind DNA to mica are Ni(II), Co(II), and Zn(II), which have ionic radii from 0.69 to 0.74 A. In Mn(II), ionic radius 0.82 A, DNA binds weakly to mica. In Cd(II) and Hg(II), respective ionic radii of 0.97 and 1.1 A, DNA does not bind to mica well enough to be imaged with the AFM. These results may to relate to how large a cation can fit into the cavities above the recessed hydroxyl groups in the mica lattice, although hypotheses based on hydrated ionic radii cannot be ruled out. The dependence of DNA binding on the concentrations of the cations Ni(II), Co(II), or Zn(II) shows maximal DNA binding at approximately 1-mM cation. Mg(II) does not bind DNA tightly enough to mica for AFM imaging. Mg(II) is a Group 2 cation with an ionic radius similar to that of Ni(II). Ni(II), Co(II), and Zn(II) have anomalously high enthalpies of hydration that may relate to their ability to bind DNA to mica. This AFM assay for DNA binding to mica has potential applications for assaying the binding of other polymers to mica and other flat surfaces.     

Atomic force microscopy imaging of double stranded DNA and RNA.

A procedure for imaging long DNA and double stranded RNA (dsRNA) molecules using Atomic Force Microscopy (AFM) is described. Stable binding of double stranded DNA molecules to the flat mica surface is achieved by chemical modification of freshly cleaved mica under mild conditions with 3-aminopropyltriethoxy silane. We have obtained striking images of intact lambda DNA, Hind III restriction fragments of lambda DNA and dsRNA from reovirus. These images are stable under repeated scanning and measured contour lengths are accurate to within a few percent. This procedure leads to strong DNA attachment, allowing imaging under water. The widths of the DNA images lie in the range of 20 to 80nm for data obtained in air with commercially available probes. The work demonstrates that AFM is now a routine tool for simple measurements such as a length distribution. Improvement of substrate and sample preparation methods are needed to achieve yet higher resolution.     

Atomic Force Microscopy Imaging of Double Stranded DNA and RNA

Abstract

A procedure for imaging long DNA and double stranded RNA (dsRNA) molecules using Atomic Force Microscopy (AFM) is described. Stable binding of double stranded DNA molecules to the flat mica surface is achieved by chemical modification of freshly cleaved mica under mild conditions with 3-aminopropyltriethoxy silane. We have obtained striking images of intact lambda DNA, Hind III restriction fragments of lambda DNA and dsRNA from reovirus. These images are stable under repeated scanning and measured contour lengths are accurate to within a few percent. This procedure leads to strong DNA attachment, allowing imaging under water. The widths of the DNA images lie in the range of 20 to 80nm for data obtained in air with commercially available probes. The work demonstrates that AFM is now a routine tool for simple measurements such as a length distribution. Improvement of substrate and sample preparation methods are needed to achieve yet higher resolution.     

Conformational dynamics of individual antibodies using computational docking and AFM

Molecular recognition between a receptor and a ligand requires a certain level of flexibility in macromolecules. In this study, we aimed at analyzing the conformational variability of receptors portrayed by monoclonal antibodies that have been individually imaged using atomic force microscopy (AFM). Individual antibodies were chemically coupled to activated mica surface, and they have been imaged using AFM in ambient conditions. The resulting topographical surface of antibodies was used to assemble the three subunits constituting antibodies: two antigen‐binding fragments and one crystallizable fragment using a surface‐constrained computational docking approach. Reconstructed structures based on 10 individual topographical surfaces of antibodies are presented for which separation and relative orientation of the subunits were measured. When compared with three X‐ray structures of antibodies present in the protein data bank database, results indicate that several arrangements of the reconstructed subunits are comparable with those of known structures. Nevertheless, no reconstructed structure superimposes adequately to any particular X‐ray structure consequence of the antibody flexibility. We conclude that high‐resolution AFM imaging with appropriate computational reconstruction tools is adapted to study the conformational dynamics of large individual macromolecules deposited on mica. Copyright © 2013 John Wiley & Sons, Ltd.     

THE ATOMIC FORCE MICROSCOPE DETECTS ATP-SENSITIVE PROTEIN CLUSTERS IN THE PLASMA MEMBRANE OF TRANSFORMED MDCK CELLS

Plasma membrane proteins are supposed to form clusters that allow ‘functional cross-talk’ between individual molecules within nanometre distance. However, such hypothetical protein clusters have not yet been shown directly in native plasma membranes. Therefore, we developed a technique to get access to the inner face of the plasma membrane of cultured transformed kidney (MDCK) cells. The authors applied atomic force microscopy (AFM) to visualize clusters of native proteins protruding from the cytoplasmic membrane surface. We used the K⁺channel blocker iberiotoxin (IBTX), a positively charged toxin molecule, that binds with high affinity to plasma membrane potassium channels and to atomically flat mica. Thus, apical plasma membranes could be ‘glued’ with IBTX to the mica surface with the cytosolic side of the membrane accessible to the scanning AFM tip. The topography of these native inside-out membrane patches was imaged with AFM in electrolyte solution mimicking the cytosol. The plasma membrane could be clearly identified as a lipid bilayer with the characteristic height of 4.9±0.02nm. Multiple proteins protruded from the lipid bilayer into the cytosolic space with molecule heights between 1 and 20nm. Large protrusions were most likely protein clusters. Addition of the proteolytic enzyme pronase to the bath solution led to the disappearance of the proteins within minutes. The metabolic substrate ATP induced a shape-change of the protein clusters and smaller subunits became visible. ADP or the non-hydrolysable ATP analogue, ATP-γ-S, could not exert similar effects. It is concluded that plasma membrane proteins (and/or membrane associated proteins) form ‘functional clusters’ in their native environment. The ‘physiological’ arrangement of the protein molecules within a cluster requires ATP.     

Atomic force microscopy of supported lipid bilayers

Supported lipid bilayers (SLBs) are widely used in biophysical research to investigate the properties of biological membranes and offer exciting prospects in nanobiotechnology. Atomic force microscopy (AFM) has become a well-established technique for imaging SLBs at nanometer resolution. A unique feature of AFM is its ability to monitor dynamic processes, such as the interaction of bilayers with proteins and drugs. Here, we present protocols for preparing dioleoylphosphatidylcholine/dipalmitoylphosphatidylcholine (DOPC/DPPC) bilayers supported on mica using small unilamellar vesicles and for imaging their nanoscale interaction with the antibiotic azithromycin using AFM. The entire protocol can be completed in 10 h.     

Sample Preparation for Single Virion Atomic Force Microscopy and Super-resolution Fluorescence Imaging

Immobilization of virions to glass surfaces is a critical step in single virion imaging. Here we present a technique adopted from single molecule imaging assays which allows adhesion of single virions to glass surfaces with specificity. This preparation is based on grafting the surface of the glass with a mixture of PLL-g-PEG and PLL-g-PEG-Biotin, adding a layer of avidin, and finally creating virion anchors through attachment of biotinylated virus specific antibodies. We have applied this technique across a range of experiments including atomic force microscopy (AFM) and super-resolution fluorescence imaging. This sample preparation method results in a control adhesion of the virions to the surface.     

The measurement of Bacillus mycoides spore adhesion using atomic force microscopy,simple counting methods,and a spinning disk technique

An atomic force microscope has been used to study the adhesion of Bacillus mycoides spores to a hydrophilic glass surface and a hydrophobic-coated glass surface. AFM images of spores attached to the hydrophobic-coated mica surface allowed the measurement of spore dimensions in an aqueous environment without desiccation. The spore exosporium was observed to be flexible and to promote the adhesion of the spore by increasing the area of spore contact with the surface. Results from counting procedures using light microscopy matched the density of spores observed on the hydrophobic-coated glass surface with AFM. However, no spores were observed on the hydrophilic glass surface with AFM, a consequence of the weaker adhesion of the spores at this surface. AFM was also used to quantify directly the interactions of B. mycoides spores at the two surfaces in an aqueous environment. The measurements used "spore probes" constructed by immobilizing a single spore at the apex of a tipless AFM cantilever. The data showed that stretching and sequential bond breaking occurred as the spores were retracted from the hydrophilic glass surface. The greatest spore adhesion was measured at the hydrophobic-coated glass surface. An attractive force on the spores was measured as the spores approached the hydrophobic-coated surface. At the hydrophilic glass surface, only repulsive forces were measured during the approach of the spores. The AFM force measurements were in qualitative agreement with the results of a hydrodynamic shear adhesion assay that used a spinning disk technique. Quantitatively, AFM measurements of adhesive force were up to 4 x 10(3) times larger than the estimates made using the spinning disk data. This is a consequence of the different types of forces applied to the spore in the different adhesion assays. AFM has provided some unique insights into the interactions of spores with surfaces. No other instrument can make such direct measurements for single microbiological cells.     

Atomic force microscopy of supported planar membrane bilayers.

Membrane bilayers of dipalmitoyl phosphatidylcholine (DPPC) and dipalmitoyl phosphatidylethanolamine (DPPE) adsorbed to a freshly cleaved mica substrate have been imaged by Atomic Force Microscopy (AFM). The membranes were mounted for imaging by two methods: (a) by dialysis of a detergent solution of the lipid in the presence of the substrate material, and (b) by adsorption of lipid vesicles onto the substrate surface from a vesicle suspension. The images were taken in air, and show lipid bilayers adhering to the surface either in isolated patches or in continuous sheets, depending on the deposition conditions. Epifluorescence light-microscopy shows that the lipid is distributed on the substrate surfaces as seen in the AFM images. In some instances, when DPPE was used, whole, unfused vesicles, which were bound to the substrate, could be imaged by the AFM. Such membranes should be capable of acting as natural anchors for imaging membrane proteins by AFM.     

Method for orienting DNA molecules on mica surfaces in one direction for atomic force microscopy imaging.

An efficient method was developed to stretch DNA molecules on an atomically flat surface for AFM imaging. This method involves anchoring DNA molecules from their 5' ends to amino silanized mica surfaces. N-Succinimidyl6-[3'-(2-pyridyldithio) propionamido]hexanoate (LC-SPDP), a heterobifunctional cross-linker with a flexible spacer arm was used for this purpose. Immobilization was carried out by introducing a thiol group to the 5' end of DNA by PCR. Thiolated molecules were then reacted with the cross linker to conjugate with its 2-pyridyl disulphide group via sulfhydryl exchange. The resulting complex was deposited on amino silanized mica where NHS-ester moiety of the cross linker reacted with the primary amino group on the surface. Samples were washed by a current of water and dried by an air jet in one direction parallel to the surface. DNA molecules were fully stretched in one direction on imaging them by AFM.     

Hyaluronan conformations on surfaces: effect of surface charge and hydrophobicity

Extended, relaxed, condensed, and interacting forms of the polysaccharide hyaluronan have been observed by atomic force microscopy (AFM). The types of images obtained depend on the properties of the surfaces used. We have investigated several different surface conditions for HA imaging, including unmodified mica, mica chemically modified with two different kinds of amino-terminated silanes (3-aminopropyltriethoxysilane and N-trimethoxysilylpropyl-N,N,N-trimethylammonium chloride), and highly oriented pyrolytic graphite. We found the degree of HA molecular extension or condensation to be variable, and the number of bound chains per unit area was low, for all of the mica-based surfaces. HA was more easily imaged on graphite, a hydrophobic surface. Chains were frequently observed in high degrees of extension, maintained by favorable interaction with the surface after molecular combing. This observation suggests that the HA macromolecule interacts with graphite through hydrophobic patches along its surface. AFM studies of HA behavior on differing surfaces under well-controlled environmental conditions provides useful insight into the variety of conformations and interactions likely to be found under differing physiological conditions.     

Method for stretching DNA molecules on mica surface in one direction for AFM imaging.

An efficient method was developed to stretch DNA molecules on an atomically flat surface for AFM imaging. This method involves anchoring DNA molecules from their 5' ends to amino silanized mica surfaces. N-Succinimidyl6-[3'-(2-pyridyldithio) propionamido]hexanoate (LC-SPDP), a heterobifunctional cross-linker with a flexible spacer arm was used for this purpose. The immobilization process was carried out by introducing a thiol group to the 5' end of DNA by PCR. Thiolated molecules were then reacted with the cross linker to conjugate with its 2-pyridyl disulphide group via sulfhydryl exchange. The resulting complex was deposited on amino silanized mica where NHS-ester moiety of the cross linker reacted with the primary amino group on the surface. Samples were washed by a current of water and dried by an air jet in one direction parallel to the surface. DNA molecules were shown to be fully stretched in one direction on imaging them by AFM.     

Imaging of nucleic acids with atomic force microscopy

Atomic force microscopy (AFM) is a key tool of nanotechnology with great importance in applications to DNA nanotechnology and to the recently emerging field of RNA nanotechnology. Advances in the methodology of AFM now enable reliable and reproducible imaging of DNA of various structures, topologies, and DNA and RNA nanostructures. These advances are reviewed here with emphasis on methods utilizing modification of mica to prepare the surfaces enabling reliable and reproducible imaging of DNA and RNA nanostructures. Since the AFM technology for DNA is more mature, AFM imaging of DNA is introduced in this review to provide experience and background for the improvement of AFM imaging of RNA. Examples of imaging different structures of RNA and DNA are discussed and illustrated. Special attention is given to the potential use of AFM to image the dynamics of nucleic acids at the nanometer scale. As such, we review recent advances with the use of time-lapse AFM.     

AFM for structure and dynamics of biomembranes

We review structure and dynamic measurements of biomembranes by atomic force microscopy (AFM). We focus mainly on studies involving supported lipid bilayers (SLBs), particularly formation by vesicle rupture on flat and corrugated surfaces, nucleation and growth of domains in phase-separated systems, anesthetic-lipid interactions, and protein/peptide interactions in multicomponent systems. We show that carefully designed experiments along with real-time AFM imaging with superior lateral and z resolution (0.1 nm) have revealed quantitative details of the mechanisms and factors controlling vesicle rupture, domain shape and size, phase transformations, and some model biological interactions. The AFM tip can also be used as a mechanical transducer and incorporated in electrochemical measurements of membrane components; therefore, we touch on these important applications in both model and cell membranes.     

The EcoRI-DNA complex as a model for investigating protein-DNA interactions by atomic force microscopy

Atomic force microscopy (AFM) is a technique widely used to image protein-DNA complexes, and its application has now been extended to the measurements of protein-DNA binding constants and specificities. However, the spreading of the protein-DNA complexes on a flat substrate, generally mica, is required prior to AFM imaging. The influence of the surface on protein-DNA interactions is therefore an issue which needs to be addressed. For that purpose, the extensively studied EcoRI-DNA complex was investigated with the aim of providing quantitative information about the surface influence. The equilibrium binding constant of the complex was determined by AFM at both low and high ionic strengths and compared to electrophoretic mobility shift assay measurements (EMSA). In addition, the effect of the DNA length on dissociation of the protein from its specific site was analyzed. It turned out that the AFM measurements are similar to those obtained by EMSA at high ionic strengths. We then advance the idea that this effect is due to the high counterion concentration near the highly negatively charged mica surface. In addition, a dissociation of the complexes once they are adsorbed onto the surface was observed, which is weakly dependent on the ionic strength contrary to what occurs in solution. Finally, a two-step mechanism, which describes the adsorption of the EcoRI-DNA complexes on the surface, is proposed. This model could also be extended to other protein-DNA complexes.     

AFM for structure and dynamics of biomembranes

We review structure and dynamic measurements of biomembranes by atomic force microscopy (AFM). We focus mainly on studies involving supported lipid bilayers (SLBs), particularly formation by vesicle rupture on flat and corrugated surfaces, nucleation and growth of domains in phase-separated systems, anesthetic-lipid interactions, and protein/peptide interactions in multicomponent systems. We show that carefully designed experiments along with real-time AFM imaging with superior lateral and z resolution (0.1 nm) have revealed quantitative details of the mechanisms and factors controlling vesicle rupture, domain shape and size, phase transformations, and some model biological interactions. The AFM tip can also be used as a mechanical transducer and incorporated in electrochemical measurements of membrane components; therefore, we touch on these important applications in both model and cell membranes.     

Gold labeling of cell monolayers grown on dextran beads

Gold labeling of antigenic sites has become an increasingly useful tool in the study of cultured cell monolayers. If these monolayers are grown on flat substrates, major difficulties in both scanning (SEM) and transmission electron microscopy (TEM) specimen preparation and imaging may result. An alternate surface, that of dextran microcarrier beads, eliminates a majority of these difficulties and facilitates correlative TEM and SEM. The SEM procedure for using backscattered electron imaging requires the use of carbon planchets as the cell growth matrix to eliminate background signals. These planchets are expensive and are not an optimal cell-attachment matrix in that they result in loose and abnormally shaped cells. In contrast, the dextran beads were produced specifically for cell culture and, therefore, provide an excellent surface for growth. The beads have an average diameter of 100 microns, allowing attachment directly to aluminum stubs without signal generation from the aluminum to interfere with the gold signal. With TEM preparation, the monolayer poses the major disadvantage. Specimen preparation for thin sectioning is often preceded by extensive manipulation. In the microcarrier bead system, the beads are directly sectionable, and it is possible to cut five to eight full beads per thin section. This increase in cell surface makes quantification of gold labeling easier and also provides a more representative sampling of the monolayer. The ease of preparation, the decrease in reagents used (via cell pooling), and the ability to use one cell preparation for TEM and SEM make this procedure an ideal technique for gold labeling.