Molecular cloning and characterization of the dpy-20 gene of Caenorhabditis elegans

We describe the molecular analysis of the dpy20 gene in Caenorhabditis elegans. Isolation of genomic sequences was facilitated by the availability of a mutation that resulted from insertion of a Tc1 transposable element into the dpy-20 gene. The Tc1 insertion site in the m474:: Tc1 allele was identified and was found to lie within the coding region of dpy-20. Three revertants (two wild-type and one partial revertant) resulted from the excision of this Tc1 element. Genomic dpy-20 clones were isolated from a library of wild-type DNA and were found to lie just to the left of the unc-22 locus on the physical map, compatible with the position of dpy-20 on the genetic map. Cosmid DNA containing the dpy-20 gene was successfully used to rescue the mutant phenotype of animals homozygous for another dpy-20 allele, e1282ts. Sequence analysis of the putative dpy-20 homologue in Caenorhabditis briggsae was performed to confirm identification of the coding regions of the C. elegans gene and to identify conserved regulatory regions. Sequence analysis of dpy-20 revealed that it was not similar to other genes encoding known cuticle components such as collagen or cuticulin. The dpy-20 gene product, therefore, identifies a previously unknown type of protein that may be directly or indirectly involved in cuticle function. Northern blot analysis showed that dpy-20 is expressed predominantly in the second larval stage and that the mRNA is not at all abundant. Data from temperature shift studies using the temperature-sensitive allele e1282ts showed that the sensitive period also occurs at approximately the second larval stage. Therefore, expression of dpy-20 mRNA and function of the DPY-20 protein are closely linked temporally.     

Characterization of thelet-653 gene inCaenorhabditis elegans

A mutation in thelet-653 gene ofCaenorhabditis elegans results in larval death. The lethal arrest is concurrent with the appearance of a vacuole anterior to the lower pharyngeal bulb. The position of the vacuole is consistent with a dysfunction of the secretory/excretory apparatus. Germline transformation rescue experiments were able to position thelet-653 gene to two overlapping cosmid subclones. Sequence data generated from both cDNA and genomic DNA subclones indicated thatlet-653 encodes a mucin-like protein. Our characterization suggests that a mucin-like protein is essential for effective functioning of the secretory/excretory apparatus withinC. elegans.     

Tcl transposition and mutator activity in a Bristol strain of Caenorhabditis elegans

Summary In most strains of Caenorhabditis elegans with a low copy number of Tc1 transposable elements, germline transposition is rare or undetectable. We have observed low-level Tel transposition in the genome of the C. elegans var. Bristol strain KR579 (unc-13[e51]) resulting in an increase in Tc1 copy number and subsequent mutator activity. Examination of genomic blots from KR579 and KR579derived strains revealed that more Tc1-hybridizing bands were present than in other Bristol strains. A novel Tc1-hybridizing fragment was cloned from a KR579-derived strain. Unique sequence DNA flanking the Tc1 element identified a 1.6 kb restriction fragment length difference between the KR579 and N2 strains consistent with a Tc1 insertion at a new genomic site. The site of insertion of this Tel was sequenced and is similar to the published Tel insertion site consensus sequence. Several isolates of KR579 were established and maintained on plates for a period of 3 years in order to determine if Tc1 copy number would continue to increase. In one isolate, KR1787, a further increase in Tc1 copy number was observed. Examination of the KR1787 strain has shown that it also exhibits mutator activity as assayed by the spontaneous mutation frequency at the unc-22 (twitcher) locus. The KR579 strain differs from most low copy number strains in that it exhibits low-level transposition which has developed into mutator activity.     

线虫prg-1基因对小RNA表达的影响

以秀丽隐杆线虫为材料发现,prg-1基因突变不仅影响piRNA的表达,还影响部分miRNA的表达,同时还发现ncRNA-like型小RNA,对ncRNA-like序列比较,认为ncRNA-like与piRNA或miRNA序列极为相似;对ncRNA-like与miRNA或piRNA的基因座比较,发现ncRNA-like与miRNA或piRNA基因座完全相同．推测这些ncRNA-like型小RNA可能与miRNA或piRNA有着相同的RNA前体来源．     

基于微流控芯片的秀丽隐杆线虫的研究进展

微流控芯片技术作为近年来最前沿的分析技术之一,已经在化学、生物学、医药学等研究领域取得了突破性的进展.微流控芯片具有高通量、微型化和多功能集成化等独特优势,已经成为生物医学研究的新平台之一,被越来越多地应用于秀丽隐杆线虫的研究.综述了基于微流控芯片上的秀丽隐杆线虫在生物医学领域中的研究进展,侧重介绍了微流控芯片在线虫的自动化固定、行为学、衰老与发育学、神经学、药物筛选及基因筛选等六大方面所取得的最新进展,并展望了微流控芯片的应用前景.     

Breaking Caenorhabditis elegans the easy way using the Balch homogenizer: An old tool for a new application

The nematode Caenorhabditis elegans is a model organism best known for its powerful genetics. There is an increasing need in the worm community to couple genetics with biochemistry. Isolation of functionally active proteins or nucleic acids without the use of strong oxidizing denaturants or of subcellular compartments from C. elegans has, however, been challenging because of the worms’ thick surrounding cuticle. The Balch homogenizer is a tool that has found much use in mammalian cell culture biology. The interchangeable single ball-bearing design of this instrument permits rapid permeabilization, or homogenization, of cells. Here we demonstrate the utility of the Balch homogenizer for studies with C. elegans. We describe procedures for the efficient breakage and homogenization of every larval stage, including dauers, and show that the Balch homogenizer can be used to extract functionally active proteins. Enzymatic assays for catalase and dihydrolipoamide dehydrogenase show that sample preparation using the Balch homogenizer equals or outperforms conventional methods employing boiling, sonication, or Dounce homogenization. We also describe phenol-free techniques for isolation of genomic DNA and RNA. Finally, we used the tool to isolate coupled mitochondria and polysomes. The reusable Balch homogenizer represents a quick and convenient solution for undertaking biochemical studies on C. elegans.     

The identification of a Caenorhabditis elegans homolog of p34cdc2 kinase

We have identified a Caenorhabditis elegans homolog of p34^cdc2 kinase. The C. elegans homolog, ncc-1, is -60% identical to p34^cdc2 of Homo sapiens. When expressed from a constitutive yeast promoter, ncc-1 is capable of complementing a conditional lethal mutation in the CDC28 gene of Saccharomyces cerevisiae, indicating that this C. elegans homolog can properly regulate the cell cycle.     

Genetic analysis and complementation by germ-line transformation of lethal mutations in the unc-22 IV region of Caenorhabditis elegans

Summary The subject of this study is the organization of essential genes in the 2 map-unit unc-22 IV region of the Caenorhabditis elegans genome. With the goal of achieving mutational saturation of essential genes in this region, 6491 chromosomes mutagenized with ethyl methanesulfonate (EMS) were screened for the presence of lethal mutations in the unc-22 region. The genetic analysis of 21 lethal mutations in the unc-22 region resulted in the identification of 6 new essential genes, making a total of 36 characterized to date. A minimum of 49 essential genes are estimated to lie in this region. A set of seven formaldehyde-induced deficiencies of unc-22 and surrounding loci were isolated to facilitate the positioning of essential genes on the genetic and physical maps. In order to study essential genes at the molecular level, our approach was to rescue lethal mutations by the injection of genomic DNA in the form of cosmid clones into the germ-line of balanced heterozygotes carrying a lethal mutation. The cosmid clones containing let-56 and let-653 were identified by this method.     

The invertebrate microtubule-associated protein PTL-1 functions in mechanosensation and development in <Emphasis Type="Italic">Caenorhabditis elegans</Emphasis>

PTL-1, a microtubule-associated protein of the structural MAP2/tau family, is the sole member of this gene family in Caenorhabditis elegans. Sequence analysis of available invertebrate genomes revealed a number of single, putative tau-like genes with high similarity to ptl-1. The ptl-1 gene is expressed in a number of cells, most notably mechanosensory neurons. We examined the role of ptl-1 in C. elegans in adult neurons as well as during development. A ptl-1 knockout strain of worms exhibited an egg-hatching defect, as well as a reduced sensitivity to touch stimuli. In addition, the knockout allele ptl-1(ok621) acts as a dominant enhancer of several temperature-sensitive alleles of mec-7 and mec-12, which code the isoforms of β-tubulin and α-tubulin that together form the unusual 15 protofilament microtubules involved in touch sensation. These results demonstrate for the first time a functional role for this microtubule-associated protein in nematodes and suggest that PTL-1 is involved in mechanosensation as well as some aspect of embryogenesis.     

Mos1 transposition as a tool to engineer the Caenorhabditis elegans genome by homologous recombination

Gene knockouts and knock-ins have emerged as powerful tools to study gene function in model organisms. The construction of such engineered alleles requires that homologous recombination between a transgenic fragment carrying the modifications desired in the genome and the locus to engineer occurs at high frequencies. Homologous recombination frequency is significantly increased in the vicinity of a DNA double-strand break. Based on this observation, a new generation of transgene-instructed genome engineering protocols was developed. Here, we present MosTIC (for “Mos1 excision-induced transgene-instructed gene conversion”), a new technique that provides a means to engineer the Caenorhabditis elegans genome. MosTIC is initiated by the mobilization of Mos1, a Drosophila transposon experimentally introduced in C. elegans. During MosTIC, a Mos1 insertion localized in the genomic region to engineer is mobilized after germline expression of the Mos transposase. Mos1 excision generates a DNA double-strand break, which is repaired by homologous recombination using a transgenic repair template. This results in the transfer of information from the transgene into the genome. Depending on the method used to trigger Mos1 excision, two alternative MosTIC protocols are available, which are presented here in detail. This technique can be used for a wide range of applications, such as structure-function analysis, protein localization and purification, genetic screens or generation of single copy transgenes at a defined locus in the genome.     

Effect of thedpy-20 androl-6 cotransformation markers on α-tubulin gene expression inC. elegans transformants

An -1 tubulin::lacZ fusion gene was introduced into the germline ofCaenorhabditis elegans, using eitherrol-6 ordpy-20 genomic DNA as a cotransformation marker. Distinct patterns in cellular specificity of the -1 tubulin::lacZ fusion gene expression were observed, depending on the cotransformation marker used. For therol-6 marker, the tubulin fusion gene was expressed in several neurons in the head and tail ganglia and a set of 38–39 ventral cord motor neurons along the body length of the animal during larval and adult development. In contrast, for thedpy-20 marker system, not only were fewer neurons stained in the head and tail region, but also the staining of ventral cord motor neurons was extremely reduced both in number and intensity. Thedpy-20 marked-mediated suppression of the -1 tubulin gene expression was observed both in thecis andtrans configurations. Similar down-regulation in the ventral cord motor neurons was observed when the -2 tubulin::lacZ fusion gene construct was tested in these experiments using thedpy-20 marker. In controls, where the tubulin fusion gene was directly injected to obtain transformants without any marker DNA, the cellular staining pattern was close to the fusion gene expression observed with therol-6 marker DNA. These results underline the importance of the choice of transformation marker system in generation of the transgenic animals, and reveal a down-regulation of the -tubulin fusion gene expression in the ventral cord motor neurons in transgenic animals when thedpy-20 gene was used as a cotransformation marker.     

The isolation of Ant1, a transposable element from Aspergillus niger

A transposable element has been isolated from the industrially important fungus Aspergillus niger (strain N402). The element was identified as an insertion sequence within the coding region of the nitrate reductase gene. It had inserted at a TA site and appeared to have duplicated the target site upon insertion. The isolated element was found to be 4798 by in length and contained 37-bp inverted, imperfect, terminal repeats (ITRs). The sequence of the central region of the element revealed an open reading frame (designated ORF1) which showed similarity, at the amino acid level, to the transposase of the Tc1/mariner class of DNA transposons. Another sequence within the central region of the element showed similarity to the 3 coding and downstream untranslated region of the amyA gene of A. niger. Sequence homology and structural features indicate that this element, which has been named Ant1 (A. niger transposon 1), is related to the Tc1/mariner group of DNA transposons. Ant1 is apparently present as a single copy in strain N402 of A. niger.     

A novel zinc-carboxypeptidase SURO-1 regulates cuticle formation and body morphogenesis in Caenorhabditis elegans

Cuticle formation and molting are critical for the development of Caenorhabditis elegans. To understand cuticle formation more clearly, we screened for suppressors in transgenic worms that expressed dominant ROL-6 collagen proteins. The suro-1 mutant, which is mild dumpy, exhibited a different ROL-6::GFP localization pattern compared to other Dpy mutants. We identified mutations in three suro-1 mutants, and found that suro-1 (ORF R11A5.7) encodes a putative zinc-carboxypeptidase homologue. The expression of this enzyme in the hypodermis and the genetic interactions between this enzyme and other collagen-modifying enzyme mutants suggest a regulatory role in collagen processing and cuticle organization for this novel carboxypeptidase. These findings aid our understanding of cuticle formation during worm development.     

Cis requirements for transposition of Tc1-like transposons in C. elegans

The Caenorhabditis elegans transposons Tc1 and Tc3 are able to transpose in heterologous systems such as human cell lines and zebrafish. Because these transposons might be useful vectors for transgenesis and mutagenesis of diverse species, we determined the minimal cis requirements for transposition. Deletion mapping of the transposon ends shows that fewer than 100 bp are sufficient for transposition of Tc3. Unlike Tc1, Tc3 has a second, internal transposase binding site at each transposon end. We found that these binding sites play no major role in the transposition reaction, since they can be deleted without reduction of the transposition frequency. Site-directed mutagenesis was performed on the conserved terminal base pairs at the Tc3 ends. The four terminal base pairs at the ends of the Tc3 inverted repeats were shown to be required for efficient transposition. Finally, increasing the length of the transposon from 1.9 kb to 12.5 kb reduced the transposition frequency by 20-fold, both in vivo and in vitro. Received: 21 April 1999 / Accepted: 10 June 1999     

Formation of <Emphasis Type="Italic">Yersinia pseudotuberculosis</Emphasis> biofilms on multiple surfaces on <Emphasis Type="Italic">Caenorhabditis elegans</Emphasis>

Summary A liquid-based assay was used to evaluate the ability of Yersinia pseudotuberculosis to form a bacterial biofilm on the nematode Caenorhabditis elegans. After 3 days of incubation in the liquid assay a biofilm was clearly visible by light microscopy on both the head and vulva region of the worms. At times, the biofilm formation on the vulva appeared to prevent the laying of eggs by the adult hermaphrodite; the eggs would later hatch inside of the worm. One possible explanation for the biofilm formation observed on the vulva may be the increased motion of the cuticle surrounding the vulva when the worm is immersed in a liquid culture. This is the first report of biofilm formation on the vulva of C. elegans.     

Genetic and fine structure analysis of unc-26(IV) and adjacent regions in Caenorhabditis elegans

Summary The genetic organization of unc-26(IV) and adjacent regions was studied in Caenorhabditis elegans. We constructed a fine structure genetic map of unc-26(IV), a gene that affects locomotion and pharyngeal muscle movement but not muscle structure. Eleven alleles were positioned relative to each other recombinationally and were classified according to phenotypic severity. The unc-26 gene spans at least 0.026 map units, which is exceptionally large for a C. elegans gene. All but one allele, e205, are amorphic alleles. Interestingly, e205 is hypomorphic but also suppressible by the amber suppressor sup-7. Nineteen lethal mutations in the unc-26 region were isolated and characterized. The unc-26 region is subdivided into four zones by five deficiency breakpoints. These mutations fall into 15 complementation groups. The stages of development affected by these mutations were determined.     

Characterization of the Caenorhabditis elegans UDP-galactopyranose mutase homolog glf-1 reveals an essential role for galactofuranose metabolism in nematode surface coat synthesis

Galactofuranose (Gal_f), the furanoic form of d-galactose produced by UDP-galactopyranose mutases (UGMs), is present in surface glycans of some prokaryotes and lower eukaryotes. Absence of the Gal_f biosynthetic pathway in vertebrates and its importance in several pathogens make UGMs attractive drug targets. Since the existence of Gal_f in nematodes has not been established, we investigated the role of the Caenorhabditis elegans UGM homolog glf-1 in worm development. glf-1 mutants display significant late embryonic and larval lethality, and other phenotypes indicative of defective surface coat synthesis, the glycan-rich outermost layer of the nematode cuticle. The glf homolog from the protozoan Leishmania major partially complements C. elegans glf-1. glf-1 mutants rescued by L. major glf, which behave as glf-1 hypomorphs, display resistance to infection by Microbacterium nematophilum, a pathogen of rhabditid nematodes thought to bind to surface coat glycans. To confirm the presence of Gal_f in C. elegans, we analyzed C. elegans nucleotide sugar pools using online electrospray ionization–mass spectrometry (ESI-MS). UDP-Gal_f was detected in wild-type animals while absent in glf-1 deletion mutants. Our data indicate that Gal_f likely has a pivotal role in maintenance of surface integrity in nematodes, supporting investigation of UGM as a drug target in parasitic species.     

Potential regulatory elements of nematode vitellogenin genes revealed by interspecies sequence comparison

Summary The nematode,Caenorhabditis elegans, has a six-member gene family encoding vitellogenins, the yolk protein precursors. These genes are expressed exclusively in the intestine of the adult hermaphrodite. Here we report the cloning of all five members of the homologous gene family from anotherCaenorhabditis species,Caenorhabditis briggsae. Nucleotide sequence analysis of these genes reveals they are about 85% identical to theC. elegans genes in the coding regions. Oveerall similarity is much reduced in noncoding and flanking regions. However, two repeated heptamers, previously identified in the upstream regions of theC. elegans genes, are largely conserved in both location and sequence inC. briggsae. Conservation of certain of these heptamers suggests that proteins bound at these positions may be especially important to promoter function and/or regulation. Comparative sequence analysis also suggests the possibility that the first 70 bases of the vitellogenin mRNAs can be folded into stable secondary structures. Almost all base differences between the two species occur in sequences predicted to be unpaired, suggesting that the ability to form intrastrand base pairs has been selected duringCaenorhabditis evolution.     

Fot1, a new family of fungal transposable elements

Summary We report here the discovery of a family of transposable elements, which we refer to as Fotl elements, in the fungal plant pathogen Fusarium oxysporum. The first element was identified as an insertion in the gene encoding nitrate reductase. It is 1928 by long, has 44 by inverted terminal repeats, contains a large open reading frame and is flanked by a 2 by (TA) target site duplication. This element shares significant structural similarities with a class of transposons that includes Tc1 from Caenorhabditis elegans and therefore represents a new class of transposable elements in fungi.