Binding between the par region of plasmids R1 and pSC101 and the outer membrane fraction of the host bacteria

The binding between par+ and par plasmid DNA to different membrane fractions of Escherichia coli was investigated. Membrane material from cells carrying different Par+ and Par- derivatives of plasmids R1 and pSC101 was isolated and fractionated into an outer and a cytoplasmic membrane fraction. The presence of plasmid DNA in the two membrane fractions was measured either by nick-translation of the membrane-bound DNA, followed by filter-hybridization to homologous DNA, or by filter-hybridization of the membrane-bound DNA to nick-translated homologous purified plasmid DNA. The DNA of par derivatives of plasmids R1 and pSC101 could be detected only in the cytoplasmic membrane fraction, whereas the corresponding par+ plasmid DNA also appeared in the outer membrane material, indicating a specific binding between the R1 and pSC101 partition loci and the bacterial outer membrane. The experiment was then modified by fractionation of the membrane material from cells carrying hybrids between the vector pSF2124 and the par region or the basic replicon region of plasmid R1. The DNA of the membrane fractions were filter-hybridized to nick-translated probes. Again, the par+ region caused hybridization to the outer membrane material. Therefore, we may conclude that controlled partitioning involves binding of DNA to membrane material that has the same density as the outer membrane of the host bacteria. This finding offers a biochemical 'assay' for studies of the molecular biology of plasmid partitioning.     

Transfer of plasmid DNA to Brevibacterium lactofermentum by electrotransformation

The Escherichia coli-Brevibacterium lactofermentum shuttle vector pBLA was introduced into intact cells of B. lactofermentum by electrotransformation. Several parameters of this procedure such as voltage and cell concentration were analysed. Optimal conditions gave an efficiency of 10(6) transformants per microgram of DNA. Two recalcitrant strains could be electrotransformed when an ampicillin pretreatment step was used. Electrotransformation experiments using DNAase or different structural forms of plasmid DNA showed that the electrotransformation process is quite different from natural transformation involving competence development. Restriction-modification-proficient B. lactofermentum could be efficiently electrotransformed with pBLA DNA isolated from E. coli. This restriction-modification system therefore seems to be overcome by electrotransformation. Thus electrotransformation may efficiently replace the protoplast bacterial transformation method.     

Electrotransformation of the stable L-form of Proteus mirabilis

Abstract To improve the transformability of stable protoplast type L-forms of Proteus mirabilis for recombinant plasmid DNA, conditions for efficient electrotransformation were explored. Exposing cells from the exponential phase of growth at a density of 6−8 × 10⁹/ml in electrotransformation buffer having a conductivity of 1.4 mS/cm to a field strength of 6.5 kV/cm for a mean pulse duration time of 1.2 ms reproducibly yielded transformation efficiencies in the order of 5 × 10⁴ transformants per μg of DNA. Compared to the polyethylene glycol method for transformation, electrotransformation appeared to be the method of choice for introduction of plasmid DNA into L-form cells.     

Construction of novel Ruminococcus albus, strains with improved cellulase activity by cloning of Streptomyces rochei endoglucanase gene

The 6.3 kb plasmid pCRB1 containing the eglS gene from Streptomyces rochei, coding for a -1,4 glucanase, was constructed in Bacillus subtilis by using the plasmid vector pIL253 with subsequent activity of the cellulase activity. Strictly anaerobic cellulolytic and xylanolytic strains of Ruminococcus albus, isolated from the rumen of cows and water buffaloes, were used for transformation experiments. The plasmid pCRB1 was introduced by means of electroporation into five freshly isolated strains of R. albus, with frequencies ranging from 10 to 10 /mg of plasmid DNA. Northern analysis demonstrated the expression of the eglS gene in R. albus. All the strains harbouring the heterologous cellulase gene showed an increase of the secreted cellulase activity.     

德氏乳杆菌保加利亚亚种电转化平台的构建和优化

德氏乳杆菌保加利亚亚种(Lactobacillus delbrueckiisub sp.bulgaricus)是最具经济价值的乳酸菌之一,在世界上广泛应用于酸奶和其它发酵乳生产。当前对该菌的代谢机制研究甚少。外源基因的转化效率是制约其分子代谢机制研究的重要因素。本研究以pMG36c为材料,对L.delbrueckiisub sp.bulgaricus CH3进行电转化条件研究。结果表明,在电转化过程中,电场强度、质粒的浓度、细胞生长状态均对转化效率有明显影响,得到了该菌株的最适电转化条件为:对数初期的细胞,质粒浓度为100 ng/50μl菌液,在10 kV/cm电场强度下电转化,转化后细胞在复壮培养液中培养3 h后涂布选择性培养基,转化率可达2.6×103CFU/μg DNA。以甘氨酸、醋酸锂、二硫苏糖醇处理细胞壁,发现醋酸锂和二硫苏糖醇共同处理对转化效率有明显改善,可提高转化效率。     

嗜热厌氧乙醇菌JW200转化条件的研究

摘要 嗜热厌氧乙醇菌遗传转化系统的缺少,制约了对该菌理论基础和应用领域的进一步研究。利用聚乙二醇（PEG6000）转化和电转化技术国际首次实现了嗜热厌氧乙醇菌JW200外源基因的导入。PEG转化效率很低,因此选择对电转化条件进行优化,转化效率从4±3.2个转化子/μg质粒DNA提高到50±7.4个转化子/μg质粒DNA。实验表明获得较高的转化效率的必要条件是在细胞密度为OD660 0.2时添加甘氨酸与蔗糖后继续培养2h以及细胞在电击前的收集与洗涤保持低温。本研究为利用基因工程手段改造嗜热厌氧乙醇菌和从分子水平研究胞内乙醇代谢途径奠定了基础。     

Unveiling electrotransformation of Moraxella catarrhalis as a process of natural transformation

The human respiratory tract pathogen Moraxella catarrhalis is a naturally competent microorganism. However, electrotransformation has long been used to introduce foreign DNA into this organism. This study demonstrated that electrotransformants obtained with linear or circular nonreplicating plasmid DNA originated exclusively from natural transformation processes taking place during the recovery phase after the application of current. Only replicating plasmid DNA could be introduced into M. catarrhalis by electrotransformation, in a type IV pilus-independent manner. Electrotransformation with homologous genomic DNA indicated that restriction of double-stranded DNA was independent of type III restriction-methylation systems. Nontransformability of M. catarrhalis by electrotransformation was observed using double- as well as single-stranded DNA. In addition, the study showed that natural competence is a very constant feature of M. catarrhalis.     

A Simple and Rapid Method of Transformation of Streptomyces rimosus R6 and Other Streptomycetes by Electroporation

Usually plasmid DNA is introduced into Streptomyces strains by polyethylene glycol-mediated transformation of protoplasts. However, many Streptomyces strains are only poorly or not at all transformable via protoplasts. Therefore, we have optimized the parameters critical for the application of electrotransformation of plasmid DNA into Streptomyces species. The most critical parameters evaluated for electrotransformation of the model strain Streptomyces rimosus R6 were the pretreatment of mycelia, buffer composition, and electric field strength. The electrocompetent mycelia were prepared from 24-h-old cultures, treated mildly with lysozyme, resuspended in sucrose-glycerol-polyethylene glycol buffer, and stored in aliquots at -70 deg C. The electric field strength of 10 kV/cm at 400 (Omega) and a capacitance of 25 (mu)F was applied. The method is simple and rapid, yielding transformant colonies in 48 to 72 h. Efficiencies of 10(sup5) to 10(sup6) transformants per (mu)g of plasmid DNA were reproducibly achieved for S. rimosus R6 and its mutants, and these numbers were 10(sup2) to 10(sup3) higher than those attained by polyethylene glycol-assisted transformation of protoplasts. In addition, we show that electroporation can be applied to other Streptomyces species, such as S. lividans 66, S. coelicolor A3(2), and an S. venezuelae strain. This last one could not be transformed by the standard protoplast procedure. Our data suggest that, because of the diversity of streptomycetes, the conditions have to be optimized for each strain.     

The transformation of legionellae by plasmid DNA

For the first time the possibility of the genetic transformation of L. pneumophila and L. bozemanii strains with the use of purified DNA of plasmids pUC19, pUC4K, pSC101 and RSF1010-pBR322 was shown. The frequency of transformation varied from 5.2 x 10(-6) to 5.8 x 10(-7), depending on the strain used in the experiment and plasmid DNA. In some of the transformants obtained in this investigation plasmid DNA whose molecular weight was similar to that of the plasmid DNA used for transformation was detected. The relatively stable preservation of plasmids pSC101 and RSF1010 in Legionella strains and the loss of plasmids pUC19, pUC4K and pBR322 in 80% of transformants during storage were shown.     

Enhanced electrotransformation of the ethanologen Zymomonas mobilis ZM4 with plasmids

The Zymomonas mobilis ZM4 strain with excellent ethanol‐producing capabilities was the first strain of Z. mobilis, which was sequenced. This strain is resistant to transformation, and no previous study has shown a detailed protocol for electrotransfer of ZM4 with foreign DNA. In this work, many electrical and biological parameters were selected and evaluated in order to optimize the electrotransformation of ZM4. First, improved transformation efficiencies of 11 896, 99, 96 and 5989 transformants/μg DNA were separately achieved with shuttle plasmid pZB21‐mini (3082 bp), pZB21 (5930 bp), pZA22 (6994 bp) and broad‐host‐range vector pBBR1MCS‐2 (5144 bp) all prepared from Escherichia coli JM110. The crucial factors affecting the transformation efficiency included the source of the plasmid (the best strain was ZM4), origin and size of the plasmids, growth phase of the cells (the most ideal phase was early log phase with OD₆₀₀ of 0.3–0.4), the electric field strength (generally 11.75 kV/cm–13.25 kV/cm) and the recovery time (3–24 h). Further, based upon the optimal transformation protocol mentioned above for replicative plasmids in ZM4, (i) the electrotransformation by recombinant plasmid pBBR1MCS‐2‐Pgap‐FLP (6880 bp) was an immediate success with the transformation efficiency 10² transformants/μg DNA; (ii) the site‐specific integration efficiencies (expressed in terms of “per μg of DNA”) of 3–6 integrating transformants was obtained using the integrating plasmid pBR328‐ldhR‐cml‐ldhL (7447 bp). This study will assist genetic and biotechnological research of ZM4 and other Z. mobilis strains by providing information about suitable vectors and a more universal and reliable procedure for introducing DNA into this strain.     

Effect of dna mutations on the replication of plasmid pSC101 in Escherichia coli K-12.

Escherichia coli strains with mutations in genes dnaB, dnaC, and dnaG were tested for their capacity to replicate pSC101 deoxyribonucleic acid (DNA) at a nonpermissive temperature. Only a small amount of radioactive thymine was incorporated into pSC101 DNA in the dna mutants at 42 degrees C, whereas active incorporation into plasmid DNA took place in wild-type strains under the same conditions. The effects of the dnaB and dnaC mutations were greater on plasmid DNA synthesis than on host chromosomal DNA synthesis, suggesting that these gene products are directly involved in the process of pSC101 DNA replication. In dnaG mutants, both plasmid and chromosomal DNA synthesis were blocked soon after the shift to high temperature; although the extent of inhibition of the plasmid DNA synthesis was greater during the early period of temperature shift to 42 degrees C as compared with that of the host DNA synthesis, during the later period it was less. It was found that the number of copies of pSC101 per chromosome in dnaA and dnaC strains, grown at 30 degrees C, was considerably lower than that in wildtype strains, suggesting that the replication of pSC101 in these mutant strains was partially suppressed even under the permissive conditions. No correlation was found between the number of plasmid copies and the tetracycline resistance level of the host bacterium.     

Laboratory-scale evidence for lightning-mediated gene transfer in soil

Electrical fields and current can permeabilize bacterial membranes, allowing for the penetration of naked DNA. Given that the environment is subjected to regular thunderstorms and lightning discharges that induce enormous electrical perturbations, the possibility of natural electrotransformation of bacteria was investigated. We demonstrated with soil microcosm experiments that the transformation of added bacteria could be increased locally via lightning-mediated current injection. The incorporation of three genes coding for antibiotic resistance (plasmid pBR328) into the Escherichia coli strain DH10B recipient previously added to soil was observed only after the soil had been subjected to laboratory-scale lightning. Laboratory-scale lightning had an electrical field gradient (700 versus 600 kV m(-1)) and current density (2.5 versus 12.6 kA m(-2)) similar to those of full-scale lightning. Controls handled identically except for not being subjected to lightning produced no detectable antibiotic-resistant clones. In addition, simulated storm cloud electrical fields (in the absence of current) did not produce detectable clones (transformation detection limit, 10(-9)). Natural electrotransformation might be a mechanism involved in bacterial evolution.     

Electrotransformation of Streptococcus pyogenes with plasmid and linear DNA

Electrotransformation was used to introduce both plasmid and linear DNA into Streptococcus pyogenes. The method was optimized using strain NZ131, for which transformation frequencies up to 10(7) per micrograms of plasmid DNA were obtained. A linear fragment of DNA, containing the streptokinase gene (ska) in which an internal fragment had been replaced with an erythromycin resistance gene (erm), was transformed into strain NZ131 with a frequency of 10(3) per micrograms DNA. The introduction of linear DNA into S. pyogenes by electrotransformation should be useful for future genetic analyses as well as targeted gene replacement.     

Intergeneric Protoplast Fusion between Ruminococcus albus and an Anaerobic Recombinant, FE7

Intergeneric protoplast fusion between Ruminococcus albus, a cellulolytic, gram-positive, anaerobic bacterium (Pc Sm Km), and an anaerobic recombinant, FE7 (Pc Sm Km), having lignin-related compound-degrading activities, was performed under strictly anaerobic conditions to introduce cellulase genes into strain FE7. The fusion frequency varied with different selected markers from 3.0 x 10 to 3.3 x 10. Two fusants, obtained from a synthetic medium with selective pressures of penicillin and streptomycin and with cellooli-gomer as the sole carbon source, were gram-negative rods. One of them, named FE7R2, showed 45 to 47% of the beta-glucosidase and cellobiosidase activities of its parent R. albus and still maintained a level of degradation activity against dehydrodivanillin, a lignin-related compound, of up to 87% of that of the parent strain FE7. To verify that the cellulolytic activities expressed in the fusant FE7R2 originated from R. albus cellulase genes, the beta-glucosidase gene of R. albus was cloned into Escherichia coli HB101 with plasmid pBR322. Cells bearing a recombinant plasmid, pRAII, produced high enzyme activities against both p-nitrophenyl-beta-d-glucoside and p-nitrophenyl-beta-d-cellobioside and could degrade cellobiose to glucose. Southern blot results showed that the cloned DNA fragment could hybridize with chromosomal DNAs of both R. albus and FE7R2, but did not with the chromosomal DNA of FE7, indicating that the beta-glucosidase gene fragment was introduced into the chromosome of FE7R2 from R. albus via the protoplast fusion. The fusant FE7R2 could utilize simultaneously both cellobiose and dehydrodivanillin. These results gave evidence that the fusion product FE7R2 is a recombinant strain between its parents R. albus and FE7. This recombinant has stably kept the above properties for about 2 years.     

Plasmid pSC101 replication mutants generated by insertion of the transposon Tn1000

A derivative of pSC101, pLC709, was constructed by ligation of the HincII-A fragment of pSC101 to the mini-colEI plasmid pVH51 and to a DNA fragment encoding resistance to the antibiotics streptomycin and spectinomycin. Insertions of the transposon Tn1000 (gamma-delta) into the pSC101 replication region of pLC709 were isolated following cotransfer of the plasmid with the sex factor F. The sites of insertion of the transposon were determined by restriction enzyme analysis and the replication and incompatibility properties of the insertion plasmids and DNA fragments cloned from them were analysed. The insertion mutations defined a locus, inc, of approximately 200 base-pairs that is responsible for pSC101-specific incompatibility. Two mutations adjacent to this region inactivate pSC101 replication but can be complemented in trans by a wild-type pSC101 plasmid, and thus define a trans-acting replication function, rep. The inc locus is within a larger region of some 450 base-pairs that is essential for pSC101 replication and that includes the origin of replication. This 450 base-pair segment can replicate in the presence of a helper plasmid that supplies the rep function in trans.     

Improvement of transformation and electroduction in avermectin high-producer,<Emphasis Type="Italic">Streptomyces avermitilis</Emphasis>

Factors affecting the PEG-mediated transformation and electrotransformation of Streptomyces avermitilis protoplasts, an industrial avermectin high-producer, were evaluated. The maximum protoplast transformation efficiency under optimum conditions with PEG was 3 x 106 transformants per microg plasmid pIJ702 DNA. The efficiency of electrotransformation with the same plasmid the intact cells grown in medium with 0.5 mmol/L CaCl2, suspended in buffer with 0.5 mol/L sucrose +1 mmol/L MgCl2, and pulsed at an electric field strength of 10 kV/cm, 800 ohms, 25 microF, was of 2 x 10(3) transformants per microg DNA. When the cells were electroporated after mild lysozyme-treatment, the efficiency was up to 10(4) transformants per microg DNA. Electroporation of protoplasts and germlings had a lower efficiency (10(2) transformants per microg DNA). We report that electroporation under optimum conditions can be used for direct transfer of nonconjugative plasmid pIJ699 between two different Streptomyces species, S. avermitilis and S. lividans.     

Electrotransformation of Streptococcus agalactiae with plasmid DNA

Abstract A protocol for efficient electrotransformation of Streptococcus agalactiae (group B streptococcus) Lancefield's strain O90R (NTCT 9993) (an unencapsulated derivative of type Ia strain O90) was developed. The Escherichia coli - Streptococcus shuttle vector pDP28 (7.8 kb) carrying the ermB gene for resistance to erythromycin was used as donor DNA. Frozen 'electrocompetent' cells were prepared by repeated washes in 10% glycerol. A 50-μl aliquot containing about 5×10⁹ colony forming units of bacteria was subjected to the electric pulse. Optimal conditions for electrotransformation were determined using different media, harvesting cells at different points of the growth curve, and using different field strengths. The dose-response curve for transformation of S. agalactiae with pDP28 showed one-hit kinetics as donor DNA varied between 0.01 and 3 μg. The efficiency of electrotransformation for this range of amounts of donor DNA was 1.2×10⁴ cfu μg⁻¹. The transformation frequencies obtained with this electroporation protocol are high enough to allow both subcloning and shotgun cloning of streptococcal DNA in S. agalactiae .     

Efficient electrotransformation system and gene targeting in pyogenic streptococci

Hemolytic streptococci are lacking in natural competence for uptake of DNA, and existing electrotransformation methods are still ineffective for most strains. By optimizing biological and electric parameters of electroporation, we established a simple, efficient, and reproducible transformation method for streptococcal cells. The major factor was an increase in the electric field strength. All tested streptococci (6 group A strains and one group C strain) were successfully transformed, and the maximal efficiency was higher than 1 x 10(7) transformants per mug of plasmid DNA. Targeted inactivation of the chromosomal genes of group A and C streptococci was achieved, using the electrotransformation method. The slo- or sagB- mutants constructed by the gene-targeting showed elevated competence for electrotransformation. Availability of the electrotransfer system for cloning and analysis of streptococcal genes is discussed.