Transformation of Kluyveromyces lactis with the kanamycin (G418) resistance gene of Tn903

Direct selection of Kluyveromyces lactis resistant to the antibiotic G418 following transformation with the kanamycin resistance gene of Tn903 required the development of a procedure for producing high yields of viable spheroplasts and for the isolation of autonomous replication sequences (ARS). To obtain high yields of viable spheroplasts, cells were treated with (1) a thiol-reducing agent (L-cysteine), and (2) a high concentration of an osmotic stabilizer, 1.5 M sorbitol. Several ARS-containing plasmids were selected from a K. lactis recombinant DNA library in K. lactis and in Saccharomyces cerevisiae. Two of four ARS clones selected in K. lactis promoted transformation frequencies of 5-10 X 10(2) G418-resistant cells/micrograms of plasmid DNA. This frequency of transformation was at least twice as high as with ARS clones selected in S. cerevisiae. The stability of ARS-containing plasmids varied; after 20 generations of growth in the presence of G418, 16-38% of the cells remained resistant to the drug. In the absence of selection pressure less than 5% of the cells retained the drug-resistance phenotype. Plasmids containing the ARS1 or 2 mu replicon of S. cerevisiae failed to transform K. lactis for G418 resistance. Inclusion of S. cerevisiae centromere, CEN4, in a K. lactis ARS recombinant plasmid did not increase the stability of the plasmid in K. lactis, and marker genes on the vector segregated predominantly 4-:0+ through meiosis. We conclude that neither the ARS sequences or the centromere of S. cerevisiae was functioning in K. lactis.     

Intergeneric transfer of deoxyribonucleic acid killer plasmids, pGKl1 and pGKl2, from Kluyveromyces lactis into Saccharomyces cerevisiae by cell fusion

Two novel linear deoxyribonucleic acid plasmids, pGKl1 and pGKl2, were isolated from the yeast Kluyveromyces lactis. K. lactis strains harboring the pGK1 plasmids killed a certain group of yeasts, including Saccharomyces cerevisiae, Saccharomyces italicus, Saccharomyces rouxii, K. lactis, Kluyveromyces thermotolerans, Kluyvermyces vanudenii, Torulopsis glabrata, Candida utilis, and Candida intermedia. In this experiment, the pGKl1 and pGKl2 plasmids were intergenerically transferred from a K. lactis killer strain into a non-killer (killer-sensitive) strain of S. cerevisiae by the use of a protoplast fusion technique. Both of the pGKl plasmids replicated autonomously and stably in the new host cells of S. cerevisiae and could coexist with the resident 2-micrometers deoxyribonucleic acid plasmid. The S. cerevisiae cells which accepted the pGKl plasmids expressed the same killer phenotype as that of the donor K. lactis killer and became resistant to the K. lactis killer. The pGKl plasmids existing in the S. cerevisiae cells were cured by treatment with ethidium bromide, and the killer and resistance characters were simultaneously lost. From there results, it was concluded that both the killer and the resistance genes are located on the pGKl plasmids.     

Construction of compatible wide-host-range shuttle vectors for lactic acid bacteria and Escherichia coli

A new collection of shuttle cloning vectors has been constructed that can be used in a broad host range, because they carry replication origins which are functional in Escherichia coli (p15A, pWV01, ColE1), Lactococcus lactis, lactobacilli, and Bacillus subtilis (pAMbeta1, pWV01). These plasmids contain the lacZ-T1T2 cassette from pJDC9, which allows the X-gal selection and cloning of DNA fragments that could cause plasmid instability in E. coli. In addition, they have been proved to be structurally and segregationally stable in Lactobacillus casei, in which their copy number has been determined by real-time quantitative PCR. Furthermore, the antibiotic resistance markers (beta-lactamase, chloramphenicol acetyl transferase, and erythromycin transacetylase) and the theta and rolling circle replicating origins have been combined to obtain this set of compatible plasmids (pIA family) that can be cotransformed, both in lactic acid bacteria and in E. coli.     

Transformation of Streptococcus sanguis Challis with Streptococcus lactis plasmid DNA.

Streptococcus lactis plasmid DNA, which is required for the fermentation of lactose (plasmid pLM2001), and a potential streptococcal cloning vector plasmid (pDB101) which confers resistance to erythromycin were evaluated by transformation into Streptococcus sanguis Challis. Plasmid pLM2001 transformed lactose-negative (Lac-) mutants of S. sanguis with high efficiency and was capable of conferring lactose-metabolizing ability to a mutant deficient in Enzyme IIlac, Factor IIIlac, and phospho-beta-galactosidase of the lactose phosphoenolpyruvate-phosphotransferase system. Plasmid pDB101 was capable of high-efficiency transformation of S. sanguis to antibiotic resistance, and the plasmid could be readily isolated from transformed strains. However, when 20 pLM2001 Lac+ transformants were analyzed by a variety of techniques for the presence of plasmids, none could be detected. In addition, attempts to cure the Lac+ transformants by treatment with acriflavin were unsuccessful. Polyacrylamide gel electrophoresis was used to demonstrate that the transformants had acquired a phospho-beta-galactosidase characteristic of that normally produced by S. lactis and not S. sanguis. It is proposed that the genes required for lactose fermentation may have become stabilized in the transformants due to their integration into the host chromosome. The efficient transformation into and expression of pLM2001 and pDB101 genes in S. sanguis provides a model system which could allow the development of a system for cloning genes from dairy starter cultures into S. sanguis to examine factors affecting their expression and regulation.     

Transformation of Streptococcus sanguis Challis with Streptococcus lactis plasmid DNA

Streptococcus lactis plasmid DNA, which is required for the fermentation of lactose (plasmid pLM2001), and a potential streptococcal cloning vector plasmid (pDB101) which confers resistance to erythromycin were evaluated by transformation into Streptococcus sanguis Challis. Plasmid pLM2001 transformed lactose-negative (Lac-) mutants of S. sanguis with high efficiency and was capable of conferring lactose-metabolizing ability to a mutant deficient in Enzyme IIlac, Factor IIIlac, and phospho-beta-galactosidase of the lactose phosphoenolpyruvate-phosphotransferase system. Plasmid pDB101 was capable of high-efficiency transformation of S. sanguis to antibiotic resistance, and the plasmid could be readily isolated from transformed strains. However, when 20 pLM2001 Lac+ transformants were analyzed by a variety of techniques for the presence of plasmids, none could be detected. In addition, attempts to cure the Lac+ transformants by treatment with acriflavin were unsuccessful. Polyacrylamide gel electrophoresis was used to demonstrate that the transformants had acquired a phospho-beta-galactosidase characteristic of that normally produced by S. lactis and not S. sanguis. It is proposed that the genes required for lactose fermentation may have become stabilized in the transformants due to their integration into the host chromosome. The efficient transformation into and expression of pLM2001 and pDB101 genes in S. sanguis provides a model system which could allow the development of a system for cloning genes from dairy starter cultures into S. sanguis to examine factors affecting their expression and regulation.     

Improved cloning vectors for bifidobacteria, based on the Bifidobacterium catenulatum pBC1 replicon

This study reports the development of several cloning vectors for bifidobacteria based on the replicon of pBC1, a cryptic plasmid from Bifidobacterium catenulatum L48 thought to replicate via the theta mode. These vectors, in which antibiotic resistance genes encoding either erythromycin or tetracycline resistance acted as selection markers, were able to replicate in a series of eight Bifidobacterium species at frequencies ranging from 4.0 x 10(1) to 1.0 x 10(5) transformants microg(-1) but not in Lactococcus lactis or Lactobacillus casei. They showed a relative copy number of around 30 molecules per chromosome equivalent and a good segregational stability, with more than 95% of the cells retaining the vectors after 80 to 100 generations in the absence of selection. Vectors contain multiple cloning sites of different lengths, and the lacZalpha peptide gene was introduced into one of the molecules, thus allowing the easy selection of colonies harboring recombinant plasmids in Escherichia coli. The functionality of the vectors for engineering Bifidobacterium strains was assessed by cloning and examining the expression of an alpha-l-arabinofuranosidase gene belonging to Bifidobacterium longum. E. coli and Bifidobacterium pseudocatenulatum recombinant clones were stable and showed an increase in alpha-arabinofuranosidase activity of over 100-fold compared to that of the untransformed hosts.     

Direct screening of recombinants in gram-positive bacteria using the secreted staphylococcal nuclease as a reporter.

A system for direct screening of recombinant clones in Lactococcus lactis, based on secretion of the staphylococcal nuclease (SNase) in the organism, was developed. The nuc gene (encoding SNase) was cloned on both rolling-circle and theta-replicating plasmids. L. lactis strains containing these nuc+ plasmids secrete SNase and are readily detectable by a simple plate test. A multicloning site (MCS) was introduced just after the cleavage site between leader peptide and the mature SNase, without affecting nuclease activity. Cloning foreign DNA fragments into any site of the MCS interrupts nuc and thus results in nuc mutant clones which are easily distinguished fron nuc+ clones on plates. The utility of this system for L. lactis was demonstrated by cloning an antibiotic resistance marker and Escherichia coli chromosomal DNA fragments into the MCS of the nucMCS cassette. Both cloning vectors containing the nucMCS cassette were also introduced into Streptococcus salivarius subsp. thermophilus, in which direct screening of nuc mutant recombinant clones was also achieved. The potential uses of nuc as a secretion reporter system are discussed.     

A potential food-grade cloning vector for Streptococcus thermophilus that uses cadmium resistance as the selectable marker

A potential food-grade cloning vector, pND919, was constructed and transformed into S. thermophilus ST3-1, a plasmid-free strain. The vector contains DNAs from two different food-approved organisms, Streptococcus thermophilus and Lactococcus lactis. The 5.0-kb pND919 is a derivative of the cloning vector pND918 (9.3 kb) and was constructed by deletion of the 4.3-kb region of pND918 which contained DNA from non-food-approved organisms. pND919 carries a heterologous native cadmium resistance selectable marker from L. lactis M71 and expresses the Cd(r) phenotype in S. thermophilus transformants. With the S. thermophilus replicon derived from the shuttle vector pND913, pND919 is able to replicate in the two S. thermophilus industrial strains tested, ST3-1 and ST4-1. Its relatively high retention rate in S. thermophilus further indicates its usefulness as a potential food-grade cloning vector. To our knowledge, this is the first report of a replicative potential food-grade vector for the industrially important organism S. thermophilus.     

Molecular characterization of a theta replication plasmid and its use for development of a two-component food-grade cloning system for Lactococcus lactis

pCD4, a small, highly stable theta-replicating lactococcal plasmid, was used to develop a food-grade cloning system. Sequence analysis revealed five open reading frames and two putative cis-acting regions. None appears to code for undesirable phenotypes with regard to food applications. Functional analysis of the replication module showed that only the cis-acting ori region and the repB gene coding for the replication initiator protein were needed for the stable replication and maintenance of pCD4 derivatives in Lactococcus lactis. A two-component food-grade cloning system was derived from the pCD4 replicon. The vector pVEC1, which carries the functional pCD4 replicon, is entirely made up of L. lactis DNA and has no selection marker. The companion pCOM1 is a repB-deficient pCD4 derivative that carries an erythromycin resistance gene as a dominant selection marker. The pCOM1 construct can only replicate in L. lactis if trans complemented by the RepB initiator provided by pVEC1. Since only the cotransformants that carry both pVEC1 and pCOM1 can survive on plates containing erythromycin, pCOM1 can be used transiently to select cells that have acquired pVEC1. Due to the intrinsic incompatibility between these plasmids, pCOM1 can be readily cured from the cells grown on an antibiotic-free medium after the selection step. The system was used to introduce a phage resistance mechanism into the laboratory strain MG1363 of L. lactis and two industrial strains. The introduction of the antiphage barrier did not alter the wild-type plasmid profile of the industrial strains. The phenotype was stable after 100 generations and conferred an effective resistance phenotype against phages of the 936 and c2 species.     

Cloning in Streptococcus lactis of plasmid-mediated UV resistance and effect on prophage stability.

Plasmid pIL7 (33 kilobases) from Streptococcus lactis enhances UV resistance and prophage stability. A 5.4-kilobase pIL7 fragment carrying genes coding for both characters was cloned into S. lactis, using plasmid pHV1301 as the cloning vector. The recombinant plasmid was subsequently transferred to three other S. lactis strains by transformation or protoplast fusion. Cloned genes were expressed in all tested strains.     

Cloning in Streptococcus lactis of plasmid-mediated UV resistance and effect on prophage stability

Plasmid pIL7 (33 kilobases) from Streptococcus lactis enhances UV resistance and prophage stability. A 5.4-kilobase pIL7 fragment carrying genes coding for both characters was cloned into S. lactis, using plasmid pHV1301 as the cloning vector. The recombinant plasmid was subsequently transferred to three other S. lactis strains by transformation or protoplast fusion. Cloned genes were expressed in all tested strains.     

Protoplast transformation of group N streptococci with cryptic plasmids

Abstract By using an extension to group N streptococci of a contransformation procedure we have introduced 4 different-sized cryptic plasmids for Streptococcus lactis into the plasmid-free S. lactis IL1403. A mixture of 4 cryptic plasmids with an indicator plasmid (pHV1301) conferring erythromycin resistance was used for IL1403 protoplast transformation. Under such conditions, 41.5% of the erythromycin-resistant transformants were contransformed with one of the cryptic plasmids in addition to pHV1301. Indicator plasmid pHV1301 was later spontaneously segregated from doubly transformed cells. This protocol should be very useful for constructing lactic streptococcal strains bearing any phenotypically cryptic plasmid.     

Partial characterization of the genetic basis for sucrose metabolism and nisin production in Streptococcus lactis.

We attempted to identify the genetic loci for sucrose-fermenting ability (Suc+), nisin-producing ability (Nip+), and nisin resistance (Nisr) in certain strains of Streptococcus lactis. To obtain genetic evidence linking the Suc+ Nip+ Nisr phenotype to a distinct plasmid, both conjugal transfer and transformation were attempted. A conjugation procedure modified to protect the recipients against the inhibitory action of nisin allowed the conjugal transfer of the Suc+ Nip+ Nisr marker from three Suc+ Nip+ Nisr donors to various recipients. The frequency of transfer ranged from 1.7 x 10(-4) to 5.6 x 10(-8) per input donor, depending on the mating pair. However, no additional plasmid DNA was apparent in these transconjugants. Transformation of S. lactis LM0230 to the Suc+ Nip+ Nisr phenotype by using the plasmid pool of S. lactis ATCC 11454 was not achieved, even though other plasmids present in the pool were successfully transferred. However, two results imply the involvement of plasmid DNA in coding for the Suc+ Nip+ Nisr phenotype. The Suc+ Nip+ Nisr marker was capable of conjugal transfer to a recipient deficient in host-mediated homologous recombination (Rec-), and the Suc+ Nip+ Nisr marker exhibited bilateral plasmid incompatibility with a number of lactose plasmids found in S. lactis. Although our results indicate that the Suc+ Nip+ Nisr phenotype is plasmid encoded, no physical evidence linking this phenotype to a distinct plasmid was obtained.     

Application of the shsp gene,encoding a small heat shock protein,as a food-grade selection marker for lactic acid bacteria

Plasmid pSt04 of Streptococcus thermophilus contains a gene encoding a protein with homology to small heat shock proteins (A. Geis, H. A. M. El Demerdash, and K. J. Heller, Plasmid 50:53-69, 2003). Strains cured from the shsp plasmids showed significantly reduced heat and acid resistance and a lower maximal growth temperature. Transformation of the cloned shsp gene into S. thermophilus St11 lacking a plasmid encoding shsp resulted in increased resistance to incubation at 60 degrees C or pH 3.5 and in the ability to grow at 52 degrees C. A food-grade cloning system for S. thermophilus, based on the plasmid-encoded shsp gene as a selection marker, was developed. This approach allowed selection after transfer of native and recombinant shsp plasmids into different S. thermophilus and Lactococcus lactis strains. Using a recombinant plasmid carrying an erythromycin resistance (Em(r)) gene in addition to shsp, we demonstrated that both markers are equally efficient in selecting for plasmid-bearing cells. The average transformation rates in S. thermophilus (when we were selecting for heat resistance) were determined to be 2.4 x 10(4) and 1.0 x 10(4) CFU/0.5 micro g of DNA, with standard deviations of 0.54 x 10(4) and 0.32 x 10(4), for shsp and Em(r) selection, respectively. When we selected for pH resistance, the average transformation rates were determined to be 2.25 x 10(4) and 3.8 x 10(3) CFU/0.5 micro g of DNA, with standard deviations of 0.63 x 10(4) and 3.48 x 10(3), for shsp and Em(r) selection, respectively. The applicability of shsp as a selection marker was further demonstrated by constructing S. thermophilus plasmid pHRM1 carrying the shsp gene as a selection marker and the restriction-modification genes of another S. thermophilus plasmid as a functional trait.     

Partial characterization of the genetic basis for sucrose metabolism and nisin production in Streptococcus lactis

We attempted to identify the genetic loci for sucrose-fermenting ability (Suc+), nisin-producing ability (Nip+), and nisin resistance (Nisr) in certain strains of Streptococcus lactis. To obtain genetic evidence linking the Suc+ Nip+ Nisr phenotype to a distinct plasmid, both conjugal transfer and transformation were attempted. A conjugation procedure modified to protect the recipients against the inhibitory action of nisin allowed the conjugal transfer of the Suc+ Nip+ Nisr marker from three Suc+ Nip+ Nisr donors to various recipients. The frequency of transfer ranged from 1.7 x 10(-4) to 5.6 x 10(-8) per input donor, depending on the mating pair. However, no additional plasmid DNA was apparent in these transconjugants. Transformation of S. lactis LM0230 to the Suc+ Nip+ Nisr phenotype by using the plasmid pool of S. lactis ATCC 11454 was not achieved, even though other plasmids present in the pool were successfully transferred. However, two results imply the involvement of plasmid DNA in coding for the Suc+ Nip+ Nisr phenotype. The Suc+ Nip+ Nisr marker was capable of conjugal transfer to a recipient deficient in host-mediated homologous recombination (Rec-), and the Suc+ Nip+ Nisr marker exhibited bilateral plasmid incompatibility with a number of lactose plasmids found in S. lactis. Although our results indicate that the Suc+ Nip+ Nisr phenotype is plasmid encoded, no physical evidence linking this phenotype to a distinct plasmid was obtained.     

Comparative sequence analysis of plasmids from Lactobacillus delbrueckii and construction of a shuttle cloning vector

While plasmids are very commonly associated with the majority of the lactic acid bacteria, they are only very rarely associated with Lactobacillus delbrueckii, with only four characterized to date. In this study, the complete sequence of a native plasmid, pDOJ1, from a strain of Lactobacillus delbrueckii subsp. bulgaricus was determined. It consisted of a circular DNA molecule of 6,220 bp with a G+C content of 44.6% and a characteristic ori and encoded six open reading frames (ORFs), of which functions could be predicted for three-a mobilization (Mob) protein, a transposase, and a fused primase-helicase replication protein. Comparative analysis of pDOJ1 and the other available L. delbrueckii plasmids (pLBB1, pJBL2, pN42, and pLL1212) revealed a very similar organization and amino acid identities between 85 and 98% for the putative proteins of all six predicted ORFs from pDOJ1, reflecting a common origin for L. delbrueckii plasmids. Analysis of the fused primase-helicase replication gene found a similar fused organization only in the theta replicating group B plasmids from Streptococcus thermophilus. This observation and the ability of the replicon to function in S. thermophilus support the idea that the origin of plasmids in L. delbrueckii was likely from S. thermophilus. This may reflect the close association of these two species in dairy fermentations, particularly yogurt production. As no vector based on plasmid replicons from L. delbrueckii has previously been constructed, an Escherichia coli-L. delbrueckii shuttle cloning vector, pDOJ4, was constructed from pDOJ1, the p15A ori, the chloramphenicol resistance gene of pCI372, and the lacZ polylinker from pUC18. This cloning vector was successfully introduced into E. coli, L. delbrueckii subsp. bulgaricus, S. thermophilus, and Lactococcus lactis. This shuttle cloning vector provides a new tool for molecular analysis of Lactobacillus delbrueckii and other lactic acid bacteria.     

Genetic and molecular analysis of pIP417 and pIP419: Bacteroides plasmids encoding 5-nitroimidazole resistance.

This report describes a genetic and molecular analysis of two transferable Bacteroides plasmids, pIP417 and pIP419, which carry genetic determinants conferring low-level resistance to 5-nitroimidazoles. The restriction endonuclease cleavage sites for each plasmid were localized. The NiR genetic determinants of pIP417 and pIP419 plasmids have been cloned into the Bacteroides cloning vector pBI191 (C.J. Smith, J. Bacteriol. 164, 294-301, 1985) as PvuII and Sau3A fragments, respectively. Both inserts had different restriction sites and did not cross-hybridize by Southern blot analysis. Genetic data obtained by cloning into pBI191 clearly show that the PvuII-generated fragments A (Rep) and B (Mob) of pIP417 are involved in plasmid replication and transfer, respectively. Although encoding resistance to the same antibiotic, both plasmids appeared different with regard to the 5-nitroimidazole resistance and replication genetic determinants. However, they share a homology in a region involved, at least in one case, in plasmid transfer. Considering the spontaneous high level of resistance to 5-nitroimidazole in Escherichia coli, this work, based on direct gene cloning into Bacteroides, demonstrates the value of such an approach.     

Molecular characterization of plasmids pS7a and pS7b from Lactococcus lactis subsp. lactis bv. diacetylactis S50 as a base for the construction of mobilizable cloning vectors

Aims:  Strain Lactococcus lactis subsp. lactis bv. diacetylactis S50 harbours five theta-replicating plasmids (pS6, pS7a, pS7b, pS80 and pS140). The aim of this study was to characterize domains involved in the replication and conjugative mobilization of the small plasmids pS7a and pS7b, which are structurally very similar.
Methods and Results:  Complete nucleotide sequences of pS7a and pS7b were determined by cloning DNA fragments of different sizes into Escherichia coli vectors. Linearized plasmids and four Eco RI fragments of the pS7a and pS7b were cloned into an origin probe vector. Constructed plasmids (pSEV10, pSK10, pISE1a and pISE1b) were able to replicate in the strain L. lactis subsp. cremoris MG1363. In addition, experiments showed that plasmids pS7a and pS7b contained oriT sequences and their conjugative transfer directly depended on the presence of pS80 in donor cells.
Conclusions:  Plasmids pS7a and pS7b contained typical lactococcal theta replication origin and repB gene that enable them to replicate in the strain L. lactis subsp. cremoris MG1363. Plasmid pS80 plays a key role in the conjugative transfer of small plasmids.
Significance and Impact of the Study:  Plasmids pS7a and pS7b-based derivatives could be valuable tools for genetic manipulation, studying processes of plasmid maintenance and horizontal gene transfer in lactococci.     

General and specialized vectors derived from pBM02, a new rolling circle replicating plasmid of Lactococcus lactis

This paper reports the construction of several general cloning vectors and a specialized depurative vector based on a new lactococcal plasmid that replicates by the rolling circle mechanism [pBM02; Plasmid 49 (2003) 118]. Most vectors are shuttle vectors for Escherichia coli-Lactococcus lactis and carry replicons of both ColE1 and pBM02 plasmids (ColE1 is used even though the pBM02 replicon is fully active in both Gram-positive and Gram-negative organisms). Segregational and structural studies indicated that the new vectors were stable enough for the majority of applications. Further, since the basic replicon is compatible with plasmid derivatives of pWV01 and pSH71, they can be maintained in the same cell with members of the two largest vector series for L. lactis and other lactic acid bacteria, the pGK, and the pNZ series.