A new instrument for the measurement of air ions

The intensive discussion of the possible impact of atmospheric electricity in theInternational Journal of Biometeorology has motivated many physicians and scientists to include the respective measurements along with the assessment of the traditional parameters. The parameters most often required are: air ions, air-to-ground currents and the electrical earth potential. This paper is primarily concerned with a new generation of instruments to study such electrometeorological parameters, particularly air ionization. This paper describes the key data and functions of the Ion-Meter PN-2001 the first result of a mid-term development plan; the Meteoline uP-2000. The latter is a group of five new instruments for the study of electro-atmospheric parameters.     

A measurement system to detect small plant movements

A measurement system based on a photodiode array technique is presented, together with some results from recordings of phototropic responses of Avena sativa L. (cv. Seger I) coleoptiles.
A commercial photodiode array (RL-256G) was used, controlled by a likewise commercial control board RC-301. Electronic circuits were built to connect the control board to the interface card IO-801 of an Apple IIe microcomputer. The circuits constitute a fast temporary memory, which mainly contains two shift registers and two timers. Programs, which control the measurements, have been written and are presented.
Detailed recordings of blue light induced phototropic movements are presented: resolution and other features of the equipment are discussed.     

Accelerometry—A technique for the measurement of human body movements

A summary of the indications for new systems of measurement is given, with particular reference to the advantages and potential hazards in the use of accelerometers. A study of the movement of the shank, or lower leg, using accelerometers is reported. The paper concludes that improved transducers will allow this method to be extended to the study of the movement of other parts of the body. An Appendix shows how the signals from six accelerometers may be used to define completely the movement of a body in space.     

Accelerometry--a technique for the measurement of human body movements

A summary of the indications for new systems of measurement is given, with particular reference to the advantages and potential hazards in the use of accelerometers. A study of the movement of the shank, or lower leg, using accelerometers is reported. The paper concludes that improved transducers will allow this method to be extended to the study of the movement of other parts of the body. An Appendix shows how the signals from six accelerometers may be used to define completely the movement of a body in space.     

Direct imaging of lateral movements of AMPA receptors inside synapses

Trafficking of AMPA receptors in and out of synapses is crucial for synaptic plasticity. Previous studies have focused on the role of endo/exocytosis processes or that of lateral diffusion of extra-synaptic receptors. We have now directly imaged AMPAR movements inside and outside synapses of live neurons using single-molecule fluorescence microscopy. Inside individual synapses, we found immobile and mobile receptors, which display restricted diffusion. Extra-synaptic receptors display free diffusion. Receptors could also exchange between these membrane compartments through lateral diffusion. Glutamate application increased both receptor mobility inside synapses and the fraction of mobile receptors present in a juxtasynaptic region. Block of inhibitory transmission to favor excitatory synaptic activity induced a transient increase in the fraction of mobile receptors and a decrease in the proportion of juxtasynaptic receptors. Altogether, our data show that rapid exchange of receptors between a synaptic and extra-synaptic localization occurs through regulation of receptor diffusion inside synapses.     

A measurement error model for time-series studies of air pollution and mortality

One barrier to interpreting the observational evidence concerning the adverse health effects of air pollution for public policy purposes is the measurement error inherent in estimates of exposure based on ambient pollutant monitors. Exposure assessment studies have shown that data from monitors at central sites may not adequately represent personal exposure. Thus, the exposure error resulting from using centrally measured data as a surrogate for personal exposure can potentially lead to a bias in estimates of the health effects of air pollution. This paper develops a multi-stage Poisson regression model for evaluating the effects of exposure measurement error on estimates of effects of particulate air pollution on mortality in time-series studies. To implement the model, we have used five validation data sets on personal exposure to PM10. Our goal is to combine data on the associations between ambient concentrations of particulate matter and mortality for a specific location, with the validation data on the association between ambient and personal concentrations of particulate matter at the locations where data have been collected. We use these data in a model to estimate the relative risk of mortality associated with estimated personal-exposure concentrations and make a comparison with the risk of mortality estimated with measurements of ambient concentration alone. We apply this method to data comprising daily mortality counts, ambient concentrations of PM10measured at a central site, and temperature for Baltimore, Maryland from 1987 to 1994. We have selected our home city of Baltimore to illustrate the method; the measurement error correction model is general and can be applied to other appropriate locations.Our approach uses a combination of: (1) a generalized additive model with log link and Poisson error for the mortality-personal-exposure association; (2) a multi-stage linear model to estimate the variability across the five validation data sets in the personal-ambient-exposure association; (3) data augmentation methods to address the uncertainty resulting from the missing personal exposure time series in Baltimore. In the Poisson regression model, we account for smooth seasonal and annual trends in mortality using smoothing splines. Taking into account the heterogeneity across locations in the personal-ambient-exposure relationship, we quantify the degree to which the exposure measurement error biases the results toward the null hypothesis of no effect, and estimate the loss of precision in the estimated health effects due to indirectly estimating personal exposures from ambient measurements.     

Servo-controlled air pump for calibration of respiratory measurement systems

We describe a servo-controlled piston pump driven by a stepping motor. The analogue controller is a single non-linear second-order feedback loop with adjustable speed and acceleration limits. This system, designed to simulate slowly-moving active and non-linear systems, can be used as a low (0–6.5 litre s⁻¹) flow volume generator in calibration procedures.     

Methods for detection and measurement of hydrogen peroxide inside and outside of cells

Hydrogen peroxide (H₂O₂) is an incompletely reduced metabolite of oxygen that has a diverse array of physiological and pathological effects within living cells depending on the extent, timing, and location of its production. Characterization of the cellular functions of H₂O₂ requires measurement of its concentration selectively in the presence of other oxygen metabolites and with spatial and temporal fidelity in live cells. For the measurement of H₂O₂ in biological fluids, several sensitive methods based on horseradish peroxidase and artificial substrates (such as Amplex Red and 3,5,3’5’-tetramethylbenzidine) or on ferrous oxidation in the presence of xylenol orange (FOX) have been developed. For measurement of intracellular H₂O₂, methods based on dihydro compounds such as 2’,7’-dichlorodihydrofluorescein that fluoresce on oxidation are used widely because of their sensitivity and simplicity. However, such probes react with a variety of cellular oxidants including nitric oxide, peroxynitrite, and hypochloride in addition to H₂O₂. Deprotection reaction-based probes (PG1 and PC1) that fluoresce on H₂O₂-specific removal of a boronate group rather than on nonspecific oxidation have recently been developed for selective measurement of H₂O₂ in cells. Furthermore, a new class of organelle-targetable fluorescent probes has been devised by joining PG1 to a substrate of SNAP-tag. Given that SNAP-tag can be genetically targeted to various subcellular organelles, localized accumulation of H₂O₂ can be monitored with the use of SNAP-tag bioconjugation chemistry. However, given that both dihydro- and deprotection-based probes react irreversibly with H₂O₂, they cannot be used to monitor transient changes in H₂O₂ concentration. This drawback has been overcome with the development of redox-sensitive green fluorescent protein (roGFP) probes, which are prepared by the introduction of two redox-sensitive cysteine residues into green fluorescent protein; the oxidation of these residues to form a disulfide results in a conformational change of the protein and altered fluorogenic properties. Such genetically encoded probes react reversibly with H₂O₂ and can be targeted to various compartments of the cell, but they are not selective for H₂O₂ because disulfide formation in roGFP is promoted by various cellular oxidants. A new type of H₂O₂-selective, genetically encoded, and reversible fluorescent probe, named HyPer, was recently prepared by insertion of a circularly permuted yellow fluorescent protein (cpYFP) into the bacterial peroxide sensor protein OxyR.     

Optical measurement of mechanical forces inside short DNA loops

Knowledge of the mechanical properties of double-stranded DNA (dsDNA) is essential to understand the role of dsDNA looping in gene regulation and the mechanochemistry of molecular machines that operate on dsDNA. Here, we use a newly developed tool, force sensors with optical readout, to measure the forces inside short, strained loops composed of both dsDNA and single-stranded DNA. By varying the length of the loops and their proportion of dsDNA, it was possible to vary their internal forces from 1 pN to >20 pN. Surprisingly, internal loop forces changed erratically as the amount of dsDNA was increased for a given loop length, with the effect most notable in the smallest loop (57 nucleotides). Monte Carlo simulations based on the helical wormlike chain model accurately predict internal forces when more than half of the loop is dsDNA but fail otherwise. Mismatches engineered into the double-stranded regions increased flexibility, suggesting that Watson-Crick basepaired dsDNA can withstand high compressive forces without recourse to multibase melts. Fluorescence correlation spectroscopy further excluded transient melting (microsecond to millisecond duration) as a mechanism for relief of compressive forces in the tested dsDNAs. DNA loops with integrated force sensors may allow the comprehensive mapping of the elasticity of short dsDNAs as a function of both sequence and salt.     

Reduction of skin bacteria in theatre air with comfortable,non-woven disposable clothing for operating-theatre staff.

Conventional loose-weave cotton operating garments were compared with clothing of a non-woven fabric to test their efficacy in reducing the dispersal of skin bacteria into theatre air. When men wore operating suits made of the non-woven fabric dispersal of skin bacteria was reduced by 72%. When all the operating-theatre staff wore suits and dresses of this fabric air bacterial counts during operating sessions were reduced by 55%; no reduction occurred when the fabric was worn by only the scrubbed team. The lowest levels of microbial contamination of the air in the operating theatre occurred when both the unscrubbed and scrubbed theatre staff wore clothes of non-woven fabric.     

Utility of the hot-wire spirometer

A comparative study has been carried out to investigate the performance of the hot-wire spirometer and the Rollingseal spirometer; the reproducibility of the data generated by an individual examiner; and the validity of data obtained by an "inexperienced examiner" using the hot-wire spirometer. The following results were obtained: 1. The experimental data given by the hot-wire spirometer were about 5-6% higher for FVC and FEV1, and about 10-12% higher for PFR, V50, and V25, respectively, when compared to the data generated by the Rollingseal spirometer. 2. The reproducibility of the data produced by the hot-wire spirometer operated by an "experienced examiner" was good, as the percent difference was about +/- 3%. 3. Reliable data were obtained with the spirometer even by an "inexperienced examiner" if he/she has gone through an on-site training concerning instrumentation and measurement methods for spirography.     

Studies on water vapor pressure gradient from external air through clothing to the skin in relation to external humidity and clothing conditions

Using a hygrometric capsule method developed by the authors, water vapor pressure was measured at each layer of clothing as well as at the skin surface on a human subject under actual wearing conditions. The pattern of vapor pressure gradient from the skin surface through clothing to the external air was examined in relation to the ambient vapor pressure and ths sort of textiles worn. The following findings were obtained. 1) Water vapor pressure gradient was greater between coat and external air than that between coat and underwear. The gradient became steeper again between underwear and the skin. 2) Under given clothing conditions, vapor pressure at each layer of clothing as well as at the skin varied according to the ambient humidity. However, the pattern of vapor pressure gradient from the skin through clothing to the external air was not greatly influenced by the external humidity. 3) The pattern of vapor pressure gradient from the skin through clothing to the external air was not greatly influenced by the external humidity. 3) The pattern of vapor pressure gradient through the clothing as a whole differed according to the kinds of textiles used for coat and underwear.     

IAEA-SSDL bilateral comparisons for diagnostic level air kerma measurement standards

Comparisons of national standard of air kerma for conventional and mammographic diagnostic X-ray radiation qualities were conducted by the IAEA. Eleven secondary standards dosimetry laboratories provided calibration data for Exradin A3 and Radcal RC6M transfer ionization chambers circulated. Each comparison result expressed as the ratio of the participant and IAEA calibration coefficient were within the acceptance limit of ±2.5%. From the 67 results of 11 participants and 10 available beam qualities, the comparison result was within its standard uncertainty in 63 cases, and within the expanded (k = 2) uncertainty in four cases. Detailed calibration uncertainty budgets from participant laboratories are presented. The relative standard calibration uncertainty of each participant was in the range of 0.5–1.3%. These results indicate that the calibration related uncertainty component is reasonable low for a clinical measurement. In addition to the calibration coefficient, other corrections should be applied for clinical measurement to achieve the recommended accuracy.     

A pulsed wire probe for the measurement of velocity and flow direction in slowly moving air

This report describes the theory and operation of a pulsed-probe anemometer designed to measure steady three-dimensional velocity fields typical of pulmonary tracheo-bronchial airflows. Local velocities are determined by measuring the transport time and orientation of a thermal pulse initiated at an upstream wire and sensed at a downstream wire. The transport time is a reproducible function of velocity and the probe wire spacing, as verified by a theoretical model of convective heat transfer. When calibrated the anemometer yields measurements of velocity accurate to +/- 5 percent and resolves flow direction to within 1 deg at airspeeds greater than or equal to 10 cm/s. Spatial resolution is +/- 0.5 mm. Measured flow patterns typical of curved circular pipes are included as examples of its application.     

A model for learning human reaching movements

 Reaching movement is a fast movement towards a given target. The main characteristics of such a movement are straight path and a bell-shaped speed profile. In this work a mathematical model for the control of the human arm during ballistic reaching movements is presented. The model of the arm contains a 2 degrees of freedom planar manipulator, and a Hill-type, non-linear mechanical model of six muscles. The arm model is taken from the literature with minor changes. The nervous system is modeled as an adjustable pattern generator that creates the control signals to the muscles. The control signals in this model are rectangular pulses activated at various amplitudes and timings, that are determined according to the given target. These amplitudes and timings are the parameters that should be related to each target and initial conditions in the workspace. The model of the nervous system consists of an artificial neural net that maps any given target to the parameter space of the pattern generator. In order to train this net, the nervous system model includes a sensitivity model that transforms the error from the arm end-point coordinates to the parameter coordinates. The error is assessed only at the termination of the movement from knowledge of the results. The role of the non-linearity in the muscle model and the performance of the learning scheme are analysed, illustrated in simulations and discussed. The results of the present study demonstrate the central nervous system’s (CNS) ability to generate typical reaching movements with a simple feedforward controller that controls only the timing and amplitude of rectangular excitation pulses to the muscles and adjusts these parameters based on knowledge of the results. In this scheme, which is based on the adjustment of only a few parameters instead of the whole trajectory, the dimension of the control problem is reduced significantly. It is shown that the non-linear properties of the muscles are essential to achieve this simple control. This conclusion agrees with the general concept that motor control is the result of an interaction between the nervous system and the musculoskeletal dynamics. Received : 21 May 1996 / Accepted in revised form : 10 June 1997