Evidence for preorganization of the glmS ribozyme ligand binding pocket

We have examined the tertiary structure of the ligand-activated glmS ribozyme by a combination of methods with the aim of evaluating the magnitude of RNA conformational change induced by binding of the cofactor, glucosamine 6-phosphate (GlcN6P). Hydroxyl radical footprinting of a trans-acting ribozyme complex identifies several sites of solvent protection upon incubation of the RNA in Mg(2+)-containing solutions, providing initial evidence of the tertiary fold of the ribozyme. Under these folding conditions and at GlcN6P concentrations that saturate the ligand-induced cleavage reaction, we do not observe changes to this pattern. Cross-linking with short-wave UV light of the complex yielded similar overall results. In addition, ribozyme-substrate complexes cross-linked in the absence of GlcN6P could be gel purified and then activated in the presence of ligand. One of these active cross-linked species links the base immediately 3' of the cleavage site to a highly conserved region of the ribozyme core and could be catalytically activated by ligand. Combined with recent studies that argue that GlcN6P acts as a coenzyme in the reaction, our data point to a riboswitch mechanism in which ligand binds to a prefolded active site pocket and assists in catalysis via a direct participation in the reaction chemistry, the local influence on the geometry of the active site constituents, or a combination of both mechanisms. This mode of action is different from that observed for other riboswitches characterized to date, which act by inducing secondary and tertiary structure changes.     

Backbone and nucleobase contacts to glucosamine-6-phosphate in the glmS ribozyme

The glmS ribozyme resides in the 5' untranslated region of glmS mRNA and functions as a catalytic riboswitch that regulates amino sugar metabolism in certain Gram-positive bacteria. The ribozyme catalyzes self-cleavage of the mRNA and ultimately inhibits gene expression in response to binding of glucosamine-6-phosphate (GlcN6P), the metabolic product of the GlmS protein. We have used nucleotide analog interference mapping (NAIM) and suppression (NAIS) to investigate backbone and nucleobase functional groups essential for ligand-dependent ribozyme function. NAIM using GlcN6P as ligand identified requisite structural features and potential sites of ligand and/or metal ion interaction, whereas NAIS using glucosamine as ligand analog revealed those sites that orchestrate recognition of ligand phosphate. These studies demonstrate that the ligand-binding site lies in close proximity to the cleavage site in an emerging model of ribozyme structure that supports a role for ligand within the catalytic core.     

Trans-acting glmS catalytic riboswitch: locked and loaded

A recently discovered class of gene regulatory RNAs, coined riboswitches, are commonly found in noncoding segments of bacterial and some eukaryotic mRNAs. Gene up- or down-regulation is triggered by binding of a small organic metabolite, which typically induces an RNA conformational change. Unique among these noncoding RNAs is the glmS catalytic riboswitch, or ribozyme, found in the 5'-untranslated region of the glmS gene in Gram-positive bacteria. It is activated by glucosamine-6-phosphate (GlcN6P), leading to site-specific backbone cleavage of the mRNA and subsequent repression of the glmS gene, responsible for cellular GlcN6P production. Recent biochemical and structural evidence suggests that the GlcN6P ligand acts as a coenzyme and participates in the cleavage reaction without inducing a conformational change. To better understand the role of GlcN6P in solution structural dynamics and function, we have separated the glmS riboswitch core from Bacillus subtilis into a trans-cleaving ribozyme and an externally cleaved substrate. We find that trans cleavage is rapidly activated by nearly 5000-fold to a rate of 4.4 min(-1) upon addition of 10 mM GlcN6P, comparable to the cis-acting ribozyme. Fluorescence resonance energy transfer suggests that this ribozyme-substrate complex does not undergo a global conformational change upon ligand binding in solution. In addition, footprinting at nucleotide resolution using terbium(III) and RNase V1 indicates no significant changes in secondary and tertiary structure upon ligand binding. These findings suggest that the glmS ribozyme is fully folded in solution prior to binding its activating ligand, supporting recent observations in the crystalline state.     

Requirement of helix P2.2 and nucleotide G1 for positioning the cleavage site and cofactor of the glmS ribozyme

The glmS ribozyme is a catalytic RNA that self-cleaves at its 5'-end in the presence of glucosamine 6-phosphate (GlcN6P). We present structures of the glmS ribozyme from Thermoanaerobacter tengcongensis that are bound with the cofactor GlcN6P or the inhibitor glucose 6-phosphate (Glc6P) at 1.7 A and 2.2 A resolution, respectively. The two structures are indistinguishable in the conformations of the small molecules and of the RNA. GlcN6P binding becomes apparent crystallographically when the pH is raised to 8.5, where the ribozyme conformation is identical with that observed previously at pH 5.5. A key structural feature of this ribozyme is a short duplex (P2.2) that is formed between sequences just 3' of the cleavage site and within the core domain, and which introduces a pseudoknot into the active site. Mutagenesis indicates that P2.2 is required for activity in cis-acting and trans-acting forms of the ribozyme. P2.2 formation in a trans-acting ribozyme was exploited to demonstrate that N1 of the guanine at position 1 contributes to GlcN6P binding by interacting with the phosphate of the cofactor. At neutral pH, RNAs with adenine, 2-aminopurine, dimethyladenine or purine substitutions at position 1 cleave faster with glucosamine than with GlcN6P. This altered cofactor preference provides biochemical support for the orientation of the cofactor within the active site. Our results establish two features of the glmS ribozyme that are important for its activity: a sequence within the core domain that selects and positions the cleavage-site sequence, and a nucleobase at position 1 that helps position GlcN6P.     

Characteristics of the glmS ribozyme suggest only structural roles for divalent metal ions

The glmS ribozyme is a riboswitch class that occurs in certain Gram-positive bacteria, where it resides within mRNAs encoding glucosamine 6-phosphate synthase. Members of this self-cleaving ribozyme class rapidly catalyze RNA transesterification upon binding GlcN6P, and genetic evidence suggests that this cleavage event is important for down-regulating GlmS protein expression. In this report, we present a refined secondary structure model of the glmS ribozyme and determine the importance of a conserved pseudoknot structure for optimal ribozyme function. Analyses of deletion constructs demonstrate that the pseudoknot, together with other structural elements, permits the ribozyme to achieve maximum rate constants for RNA cleavage at physiologically relevant Mg2+ concentrations. In addition, we show that substantial rate enhancements are supported by an exchange-inert cobalt (III) complex and by molar concentrations of monovalent ions. Our findings indicate that the glmS ribozyme forms a complex structure to employ catalytic strategies that do not require the direct participation of divalent metal ions.     

Examination of the structural and functional versatility of glmS ribozymes by using in vitro selection

Self-cleaving ribozymes associated with the glmS genes of many Gram-positive bacteria are activated by binding to glucosamine-6-phosphate (GlcN6P). Representatives of the glmS ribozyme class function as metabolite-sensing riboswitches whose self-cleavage activities down-regulate the expression of GlmS enzymes that synthesizes GlcN6P. As with other riboswitches, natural glmS ribozyme isolates are highly specific for their target metabolite. Other small molecules closely related to GlcN6P, such as glucose-6-phosphate, cannot activate self-cleavage. We applied in vitro selection methods in an attempt to identify variants of a Bacillus cereus glmS ribozyme that expand the range of compounds that induce self-cleavage. In addition, we sought to increase the number of variant ribozymes of this class to further examine the proposed secondary structure model. Although numerous variant ribozymes were obtained that efficiently self-cleave, none exhibited changes in target specificity. These findings are consistent with the hypothesis that GlcN6P is used by the ribozyme as a coenzyme for RNA cleavage, rather than an allosteric effector.     

Deciphering the role of glucosamine-6-phosphate in the riboswitch action of glmS ribozyme

The GlmS ribozyme is believed to exploit a general acid-base catalytic mechanism in the presence of glucosamine-6-phosphate (GlcN6P) to accelerate self-cleavage by approximately six orders of magnitude. The general acid and general base are not known, and the role of the GlcN6P cofactor is even less well understood. The amine group of GlcN6P has the ability to either accept or donate a proton and could therefore potentially act as an acid or a base. In order to decipher the role of GlcN6P in the self-cleavage of glmS, we have determined the preferred protonation state of the amine group in the wild-type and an inactive G40A mutant using molecular dynamics simulations and free energy calculations. Here we show that, upon binding of GlcN6P to wild-type glmS, the pK(a) of the amine moiety is altered by the active site environment, decreasing by about 2.2 from a solution pK(a) of about 8.2. On the other hand, we show that the pK(a) of the amine group slightly increases to about 8.4 upon binding to the G40A inactive mutant of glmS. These results suggest that GlcN6P acts as a general acid in the self-cleavage of glmS. Upon binding to glmS, GlcN6P can easily release a proton to the 5'-oxygen of G1 during self-cleavage of the backbone phosphodiester bond. However, in the G40A inactive mutant of glmS, the results suggest that the ability of GlcN6P to easily release its proton is diminished, in addition to the possible lack of G40 as an effective base.     

Probing non-selective cation binding in the hairpin ribozyme with Tb(III)

Catalysis by the hairpin ribozyme is stimulated by a wide range of both simple and complex metallic and organic cations. This independence from divalent metal ion binding unequivocally excludes inner-sphere coordination to RNA as an obligatory role for metal ions in catalysis. Hence, the hairpin ribozyme is a unique model to study the role of outer-sphere coordinated cations in folding of a catalytically functional RNA structure. Here, we demonstrate that micromolar concentrations of a deprotonated aqueous complex of the lanthanide metal ion terbium(III), Tb(OH)(aq)(2+), reversibly inhibit the ribozyme by competing for a crucial, yet non-selective cation binding site. Tb(OH)(aq)(2+) also reports a likely location of this binding site through backbone hydrolysis, and permits the analysis of metal binding through sensitized luminescence. We propose that the critical cation-binding site is located at a position within the catalytic core that displays an appropriately-sized pocket and a high negative charge density. We show that cationic occupancy of this site is required for tertiary folding and catalysis, yet the site can be productively occupied by a wide variety of cations. It is striking that micromolar Tb(OH)(aq)(2+) concentrations are compatible with tertiary folding, yet interfere with catalysis. The motif implicated here in cation-binding has also been found to organize the structure of multi-helix loops in evolutionary ancient ribosomal RNAs. Our findings, therefore, illuminate general principles of non-selective outer-sphere cation binding in RNA structure and function that may have prevailed in primitive ribozymes of an early "RNA world".     

Metal ion binding to catalytic RNA molecules

Cations play critical roles in ribozyme structure and catalysis. Unraveling the contributions of cations as catalytic cofactors is a complex process, due to their role in inducing RNA folding and their potential ability to influence chemical reactions. Recent studies have made progress in separating these roles by directly comparing ion-induced folding with ribozyme activity. In addition, spectroscopic studies have allowed some ribozyme metal sites to be directly observed in solution, providing binding affinities and ligand information. The emerging picture suggests that important cation sites can be classified according to their affinities and properties, and can be located within the ribozyme structure. At moderate ionic strengths, a common theme is emerging for some ribozymes of structural sites that have relatively high metal ion affinities and a second type of metal site with weaker affinity that is responsible for catalysis or structural fine-tuning. In the larger ribozymes, apparent clusters of metal-sensitive positions are observed.     

In Vitro Selection and Characterization of Cellulose-Binding RNA Aptamers Using isothermal Amplification

We sought to create new cellulose-binding RNA aptamers for use as modular components in the engineering of complex functional nucleic acids. We designed our in vitro selection strategy to incorporate self-sustained sequence replication (3SR), which is an isothermal nucleic acid amplification protocol that allows for the rapid amplification of RNAs with little manipulation. The best performing aptamer representative was chosen for reselection and further optimization. The aptamer exhibits robust binding of cellulose in both the powdered and paper form, but did not show any significant binding of closely related polysaccharides. The minimal cellulose-binding RNA aptamer also can be grafted onto other RNAs to permit the isolation of RNAs from complex biochemical mixtures via cellulose affinity chromatography. This was demonstrated by fusing the aptamer to a glmS ribozyme sequence, and selectively eluting ribozyme cleavage products from cellulose using glucosamine 6-phosphate to activate glmS ribozyme function.     

In vitro selection and characterization of cellulose-binding RNA aptamers using isothermal amplification

We sought to create new cellulose-binding RNA aptamers for use as modular components in the engineering of complex functional nucleic acids. We designed our in vitro selection strategy to incorporate self-sustained sequence replication (3SR), which is an isothermal nucleic acid amplification protocol that allows for the rapid amplification of RNAs with little manipulation. The best performing aptamer representative was chosen for reselection and further optimization. The aptamer exhibits robust binding of cellulose in both the powdered and paper form, but did not show any significant binding of closely related polysaccharides. The minimal cellulose-binding RNA aptamer also can be grafted onto other RNAs to permit the isolation of RNAs from complex biochemical mixtures via cellulose affinity chromatography. This was demonstrated by fusing the aptamer to a glmS ribozyme sequence, and selectively eluting ribozyme cleavage products from cellulose using glucosamine 6-phosphate to activate glmS ribozyme function.     

Mg2+-independent hairpin ribozyme catalysis in hydrated RNA films

The hairpin ribozyme catalyzes RNA cleavage in partially hydrated RNA films in the absence of added divalent cations. This reaction exhibits the characteristics associated with the RNA cleavage reaction observed under standard conditions in solution. Catalysis is a site-specific intramolecular transesterification reaction, requires the 2'-hydroxyl group of substrate nucleotide A(-1), and generates 2',3'-cyclic phosphate and 5'-hydroxyl termini. Mutations in both ribozyme and substrate abolish catalysis in hydrated films. The reaction is accelerated by cations that may enhance binding, conformational stability, and catalytic activity, and is inhibited by Tb3+. The reaction has an apparent temperature optimum of 4 degrees C. At this temperature, cleavage is slow (k(obs): 2 d(-1)) and progressive, with accumulation of cleavage products to an extent of 40%. The use of synthetic RNAs, chelators, and analysis of all reaction components by inductively coupled plasma-optical spectrophotometry (ICPOES) effectively rules out the possibility of contaminating divalent metals in the reactions. Catalysis is minimal under conditions of extreme dehydration, indicating that the reaction requires hydration of RNA by atmospheric water. Our results provide a further caution for those studying the biochemical activity of ribozymes in vitro and in cells, as unanticipated catalysis could occur during RNA manipulation and lead to misinterpretation of data.     

Use of a coenzyme by the glmS ribozyme-riboswitch suggests primordial expansion of RNA chemistry by small molecules

The glmS ribozyme-riboswitch is the first known example of a naturally occurring catalytic RNA that employs a small molecule as a coenzyme. Binding of glucosamine-6-phosphate (GlcN6P) activates self-cleavage of the bacterial ribozyme, which is part of the mRNA encoding the metabolic enzyme GlcN6P-synthetase. Cleavage leads to negative feedback regulation. GlcN6P binds in the active site of the ribozyme, where its amine could function as a general acid and electrostatic catalyst. The ribozyme is pre-folded but inactive in the absence of GlcN6P, demonstrating it has evolved strict dependence on the exogenous small molecule. The ribozyme showcases the ability of RNA to co-opt non-covalently bound small molecules to expand its chemical repertoire. Analogue studies demonstrate that some molecules other than GlcN6P, such as l-serine (but not d-serine), can function as weak activators. This suggests how coenzyme use by RNA world ribozymes may have led to evolution of proteins. Primordial cofactor-dependent ribozymes may have evolved to bind their cofactors covalently. If amino acids were used as cofactors, this could have driven the evolution of RNA aminoacylation. The ability to make covalently bound peptide coenzymes may have further increased the fitness of such primordial ribozymes, providing a selective pressure for the invention of translation.     

Folding of the group I intron ribozyme from the 26S rRNA gene of Candida albicans

Preincubation of the group I intron Ca.LSU from Candida albicans at 37°C in the absence of divalent cations results in partial folding of this intron. This is indicated by increased resistance to T1 ribonuclease cleavage of many G residues in most local helices, including P4-P6, as well as the non-local helix P7, where the G binding site is located. These changes correlate with increased gel mobility and activation of catalysis by precursor RNA containing this intron after preincubation. The presence of divalent cations or spermidine during preincubation results in formation of the predicted helices, as indicated by protection of additional G residues. However, addition of these cations during preincubation of the precursor RNA alters its gel mobility and eliminates the preincubation activation of precursor RNA seen in the absence of cations. These results suggest that, in the presence of divalent cations or spermidine, Ca.LSU folds into a more ordered, stable but misfolded conformation that is less able to convert into the catalytically active form than the ribozyme preincubated without cations. These results indicate that, like the group I intron of Tetrahymena, multiple folding pathways exist for Ca.LSU. However, it appears that the role cations play in the multiple folding pathways leading to the catalytically active form may differ between folding of these two group I introns.     

An expanded collection and refined consensus model of glmS ribozymes

Self-cleaving glmS ribozymes selectively bind glucosamine-6-phosphate (GlcN6P) and use this metabolite as a cofactor to promote self-cleavage by internal phosphoester transfer. Representatives of the glmS ribozyme class are found in Gram-positive bacteria where they reside in the 5' untranslated regions (UTRs) of glmS messenger RNAs that code for the essential enzyme L-glutamine:D-fructose-6-phosphate aminotransferase. By using comparative sequence analyses, we have expanded the number of glmS ribozyme representatives from 160 to 463. All but two glmS ribozymes are present in glmS mRNAs and most exhibit striking uniformity in sequence and structure, which are features that make representatives attractive targets for antibacterial drug development. However, our discovery of rare variants broadens the consensus sequence and structure model. For example, in the Deinococcus-Thermus phylum, several structural variants exist that carry additional stems within the catalytic core and changes to the architecture of core-supporting substructures. These findings reveal that glmS ribozymes have a broader phylogenetic distribution than previously known and suggest that additional rare structural variants may remain to be discovered.     

An early transition state for folding of the P4-P6 RNA domain

Tertiary folding of the 160-nt P4-P6 domain of the Tetrahymena group I intron RNA involves burying of substantial surface area, providing a model for the folding of other large RNA domains involved in catalysis. Stopped-flow fluorescence was used to monitor the Mg2+-induced tertiary folding of pyrene-labeled P4-P6. At 35 degrees C with [Mg2+] approximately 10 mM, P4-P6 folds on the tens of milliseconds timescale with k(obs) = 15-31 s(-1). From these values, an activation free energy deltaG(double dagger) of approximately 8-16 kcal/mol is calculated, where the large range for deltaG(double dagger) arises from uncertainty in the pre-exponential factor relating k(obs) and delta G(double dagger). The folding rates of six mutant P4-P6 RNAs were measured and found to be similar to that of the wild-type RNA, in spite of significant thermodynamic destabilization or stabilization. The ratios of the kinetic and thermodynamic free energy changes phi = delta deltaG(double dagger)/delta deltaG(o') are approximately 0, implying a folding transition state in which most of the native-state tertiary contacts are not yet formed (an early folding transition state). The k(obs) depends on the Mg2+ concentration, and the initial slope of k(obs) versus [Mg2+] suggests that only approximately 1 Mg2+ ion is bound in the rate-limiting folding step. This is consistent with an early folding transition state, because folded P4-P6 binds many Mg2+ ions. The observation of a substantial deltaG(double dagger) despite an early folding transition state suggests that a simple two-state folding diagram for Mg2+-induced P4-P6 folding is incomplete. Our kinetic data are some of the first to provide quantitative values for an activation barrier and location of a transition state for tertiary folding of an RNA domain.     

Kinetic pathway for folding of the Tetrahymena ribozyme revealed by three UV-inducible crosslinks.

The kinetics of RNA folding were examined in the L-21 ribozyme, an RNA enzyme derived from the self-splicing Tetrahymena intron. Three UV-inducible crosslinks were mapped, characterized, and used as indicators for the folded state of the ribozyme. Together these data suggest that final structures are adopted first by the P4-P6 independently folding domain and only later in a region that positions the P1 helix (including the 5' splice site), a region whose folding is linked to that of a portion of the catalytic core. At intermediate times, a non-native structure forms in the region of the triple helical scaffold, which connects the major folding domains. At 30 degrees C, the unfolded ribozyme passes through these stages with a half-life of 2 min from the time magnesium cations are provided. At higher temperatures, the half-life is shortened but the order of events is unchanged. Thermal melting of the fully folded ribozyme also revealed a multi-stage process in which the steps of folding are reversed: the kinetically slowest structure is the least stable and melts first. These structures of the ribozyme also bind Mg2+ cooperatively and their relative affinity for binding seems to be a major determinant in the order of events during folding. Na+ can also substitute for Mg2+ to give rise to the same crosslinkable structures, but only at much higher concentrations. Specific binding sites for Mg2+ may make this cation particularly efficient at electrostatic stabilization during folding of these ribozyme structures.     

Monovalent cations use multiple mechanisms to resolve ribozyme misfolding

Recent efforts have been made to unravel the independent roles of monovalent cations in RNA folding, primarily using the Tetrahymena ribozyme as a model. Here we report how monovalent cations impact the folding of the Candida ribozyme. Interestingly, this ribozyme requires an order of magnitude less monovalent cations (Na+ and Tris+) to commit to a new folding starting state in which the J3/4:P6 base triple is partially formed and mispairing in the L2.1 and L6 terminal loops is resolved. When Mg2+-induced ribozyme folding proceeded on the same energy landscape, the altered starting state led to a rapid assembly of the correct ribozyme core and a fivefold to 10-fold increase in the ribozyme activity. Moreover, when the ribozyme folding was started from a misfolding-prone state, high millimolar concentrations of monovalent cations moderately elevated the ribozyme activity by efficiently resolving the misfolding of a peripheral element, P5abc.