Mutations in Desmin's Carboxy-Terminal “Tail” Domain Severely Modify Filament and Network Mechanics

Inherited mutations in the gene coding for the intermediate filament protein desmin have been demonstrated to cause severe skeletal and cardiac myopathies. Unexpectedly, some of the mutated desmins, in particular those carrying single amino acid alterations in the non-α-helical carboxy-terminal domain (“tail”), have been demonstrated to form apparently normal filaments both in vitro and in transfected cells. Thus, it is not clear if filament properties are affected by these mutations at all. For this reason, we performed oscillatory shear experiments with six different desmin “tail” mutants in order to characterize the mesh size of filament networks and their strain stiffening properties. Moreover, we have carried out high-frequency oscillatory squeeze flow measurements to determine the bending stiffness of the respective filaments, characterized by the persistence length l_p. Interestingly, mesh size was not altered for the mutant filament networks, except for the mutant DesR454W, which apparently did not form proper filament networks. Also, the values for bending stiffness were in the same range for both the “tail” mutants (l_p = 1.0-2.0 μm) and the wild-type desmin (l_p = 1.1 ± 0.5 μm). However, most investigated desmin mutants exhibited a distinct reduction in strain stiffening compared to wild-type desmin and promoted nonaffine network deformation. Therefore, we conclude that the mutated amino acids affect intrafilamentous architecture and colloidal interactions along the filament in such a way that the response to applied strain is significantly altered.In order to explore the importance of the “tail” domain as such for filament network properties, we employed a “tail”-truncated desmin. Under standard conditions, it formed extended regular filaments, but failed to generate strain stiffening. Hence, these data strongly indicate that the “tail” domain is responsible for attractive filament-filament interactions. Moreover, these types of interactions may also be relevant to the network properties of the desmin cytoskeleton in patient muscle.     

Attractive Interactions among Intermediate Filaments Determine Network Mechanics In Vitro

Mechanical and structural properties of K8/K18 and vimentin intermediate filament (IF) networks have been investigated using bulk mechanical rheometry and optical microrheology including diffusing wave spectroscopy and multiple particle tracking. A high elastic modulus G ₀ at low protein concentration c, a weak concentration dependency of G ₀ (G ₀∼c ^0.5±0.1) and pronounced strain stiffening are found for these systems even without external crossbridgers. Strong attractive interactions among filaments are required to maintain these characteristic mechanical features, which have also been reported for various other IF networks. Filament assembly, the persistence length of the filaments and the network mesh size remain essentially unaffected when a nonionic surfactant is added, but strain stiffening is completely suppressed, G ₀ drops by orders of magnitude and exhibits a scaling G ₀∼c ^1.9±0.2 in agreement with microrheological measurements and as expected for entangled networks of semi-flexible polymers. Tailless K8Δ/K18ΔT and various other tailless filament networks do not exhibit strain stiffening, but still show high G ₀ values. Therefore, two binding sites are proposed to exist in IF networks. A weaker one mediated by hydrophobic amino acid clusters in the central rod prevents stretched filaments between adjacent cross-links from thermal equilibration and thus provides the high G ₀ values. Another strong one facilitating strain stiffening is located in the tail domain with its high fraction of hydrophobic amino acid sequences. Strain stiffening is less pronounced for vimentin than for K8/K18 due to electrostatic repulsion forces partly compensating the strong attraction at filament contact points.     

A piece-wise non-linear elastic stress expression of human and pig coronary arteries tested in vitro.

Eight human and nineteen pig unembalmed proximal left anterior descending and circumflex coronary arteries were subjected to linear volume changes (2 s ramp time) at three fixed axial extensions while immersed in a physiological saline bath at body temperature. Measured parameters included: lumen pressure, outside diameter, axial force, and axial extension. The deformations were measured using a video dimensional analyzer. The arteries were inflated to pressures well above the physiological range at each axial extension. A latex inner tube was placed inside of each specimen to prevent leakage, and its effects upon the measured stresses were corrected analytically. With this method, the average circumferential and axial stresses could be computed directly from the experimental data. In both directions the average stresses measured displayed two distinct regions: stresses occurring for small diameter changes (physiological pressures) and stresses occurring for large diameter changes (high pressures). The resulting average small strain and large strain stress components were curve-fit separately and, when reassembled, provided a piece-wise model of the stress response of coronary arteries over a wide range of inflation pressures and axial extensions.     

RpoS-Dependent Stress Response and Exoenzyme Production in Vibrio vulnificus

Vibrio vulnificus is an estuarine bacterium capable of causing rapidly fatal infections through both ingestion and wound infection. Like other opportunistic pathogens, V. vulnificus must adapt to potentially stressful environmental changes while living freely in seawater, upon colonization of the oyster gut, and upon infection of such diverse hosts as humans and eels. In order to begin to understand the ability of V. vulnificus to respond to such stresses, we examined the role of the alternate sigma factor RpoS, which is important in stress response and virulence in many pathogens. An rpoS mutant of V. vulnificus strain C7184o was constructed by homologous recombination. The mutant strain exhibited a decreased ability to survive diverse environmental stresses, including exposure to hydrogen peroxide, hyperosmolarity, and acidic conditions. The most striking difference was a high sensitivity of the mutant to hydrogen peroxide. Albuminase, caseinase, and elastase activity were detected in the wild type but not in the mutant strain, and an additional two hydrolytic activities (collagenase and gelatinase) were reduced in the mutant strain compared to the wild type. Additionally, the motility of the rpoS mutant was severely diminished. Overall, these studies suggest that rpoS in V. vulnificus is important for adaptation to environmental changes and may have a role in virulence.     

Desmin and Vimentin Intermediate Filament Networks: Their Viscoelastic Properties Investigated by Mechanical Rheometry

We have investigated the viscoelastic properties of the cytoplasmic intermediate filament (IF) proteins desmin and vimentin. Mechanical measurements were supported by time-dependent electron microscopy studies of the assembly process under similar conditions. Network formation starts within 2 min, but it takes more than 30 min until equilibrium mechanical network strength is reached. Filament bundling is more pronounced for desmin than for vimentin. Desmin filaments (persistence length l_p ≈ 900 nm) are stiffer than vimentin filaments (l_p ≈ 400 nm), but both IFs are much more flexible than microfilaments. The concentration dependence of the plateau modulus G₀ ∼ c^α is much weaker than predicted theoretically for networks of semiflexible filaments. This is more pronounced for vimentin (α = 0.47) than for desmin (α = 0.70). Both networks exhibit strain stiffening at large shear deformations. At the transition from linear to nonlinear viscoelastic response, only desmin shows characteristics of nonaffine network deformation. Strain stiffening and the maximum modulus occur at strain amplitudes about an order of magnitude larger than those for microfilaments. This is probably attributable to axial slippage within the tetramer building blocks of the IFs. Network deformation beyond a critical strain γ_max results in irreversible damage. Strain stiffening sets in at lower concentrations, is more pronounced, and is less sensitive to ionic strength for desmin than for vimentin. Hence, desmin exhibits strain stiffening even at low-salt concentrations, which is not observed for vimentin, and we conclude that the strength of electrostatic repulsion compared to the strength of attractive interactions forming the network junctions is significantly weaker for desmin than for vimentin filaments. These findings indicate that both IFs exhibit distinct mechanical properties that are adapted to their respective cellular surroundings [i.e., myocytes (desmin) and fibroblasts (vimentin)].     

Brassinosteroid-Mediated Stress Responses

Brassinosteroids (BRs) are a group of naturally occurring plant steroidal compounds with wide-ranging biological activity that offer the unique possibility of increasing crop yields through both changing plant metabolism and protecting plants from environmental stresses. In recent years, genetic and biochemical studies have established an essential role for BRs in plant development, and on this basis BRs have been given the stature of a phytohormone. A remarkable feature of BRs is their potential to increase resistance in plants to a wide spectrum of stresses, such as low and high temperatures, drought, high salt, and pathogen attack. Despite this, only a few studies aimed at understanding the mechanism by which BRs promote stress resistance have been undertaken. Studies of the BR signaling pathway and BR gene-regulating properties indicate that there is cross-talk between BRs and other hormones, including those with established roles in plant defense responses such as abscisic acid, jasmonic acid, and ethylene. Recent studies aimed at understanding how BRs modulate stress responses suggest that complex molecular changes underlie BR-induced stress tolerance in plants. Analyses of these changes should generate exciting results in the future and clarify whether the ability of BRs to increase plant resistance to a range of stresses lies in the complex interactions of BRs with other hormones. Future studies should also elucidate if BRI1, an essential component of the BR receptor, directly participates in stress response signaling through interactions with ligands and proteins involved in plant defense responses.     

Accumulation of Polyphosphate in Lactobacillus spp. and Its Involvement in Stress Resistance

Polyphosphate (poly-P) is a polymer of phosphate residues synthesized and in some cases accumulated by microorganisms, where it plays crucial physiological roles such as the participation in the response to nutritional stringencies and environmental stresses. Poly-P metabolism has received little attention in Lactobacillus, a genus of lactic acid bacteria of relevance for food production and health of humans and animals. We show that among 34 strains of Lactobacillus, 18 of them accumulated intracellular poly-P granules, as revealed by specific staining and electron microscopy. Poly-P accumulation was generally dependent on the presence of elevated phosphate concentrations in the culture medium, and it correlated with the presence of polyphosphate kinase (ppk) genes in the genomes. The ppk gene from Lactobacillus displayed a genetic arrangement in which it was flanked by two genes encoding exopolyphosphatases of the Ppx-GppA family. The ppk functionality was corroborated by its disruption (LCABL_27820 gene) in Lactobacillus casei BL23 strain. The constructed ppk mutant showed a lack of intracellular poly-P granules and a drastic reduction in poly-P synthesis. Resistance to several stresses was tested in the ppk-disrupted strain, showing that it presented a diminished growth under high-salt or low-pH conditions and an increased sensitivity to oxidative stress. These results show that poly-P accumulation is a characteristic of some strains of lactobacilli and may thus play important roles in the physiology of these microorganisms.     

Size-dependent rheology of type-I collagen networks

We investigate the system size-dependent rheological response of branched type I collagen gels. When subjected to a shear strain, the highly interconnected mesh dynamically reorients, resulting in overall stiffening of the network. When a continuous shear strain is applied to a collagen network, we observe that the local apparent modulus, in the strain-stiffening regime, is strongly dependent on the gel thickness. In addition, we demonstrate that the overall network failure is determined by the ratio of the gel thickness to the mesh size. These findings have broad implications for cell-matrix interactions, the interpretation of rheological tissue data, and the engineering of biomimetic scaffolds.     

Stress proteins in plants

Summary

Several environmental stresses elicit specific plant genomic responses. These include temperature extremes, oxidative stress, water stress, anaerobiosis as well as pathogen attack. Molecular biological approaches are now yielding insights into the mechanisms whereby plant cells perceive the stress of temperature extremes and activate their defences in response at the gene level. These responses appear to be interconnected with responses to oxidative stress in plants and an outcome is a greater appreciation of the role, and the genetic regulation, of two important groups of ‘stress proteins’, namely the heat shock proteins and the antioxidant enzymes.     

Strain-rate dependent stiffness of articular cartilage in unconfined compression

The stiffness of articular cartilage is a nonlinear function of the strain amplitude and strain rate as well as the loading history, as a consequence of the flow of interstitial water and the stiffening of the collagen fibril network. This paper presents a full investigation of the interplay between the fluid kinetics and fibril stiffening of unconfined cartilage disks by analyzing over 200 cases with diverse material properties. The lower and upper elastic limits of the stress (under a given strain) are uniquely established by the instantaneous and equilibrium stiffness (obtained numerically for finite deformations and analytically for small deformations). These limits could be used to determine safe loading protocols in order that the stress in each solid constituent remains within its own elastic limit. For a given compressive strain applied at a low rate, the loading is close to the lower limit and is mostly borne directly by the solid constituents (with little contribution from the fluid). In contrast, however in case of faster compression, the extra loading is predominantly transported to the fibrillar matrix via rising fluid pressure with little increase of stress in the nonfibrillar matrix. The fibrillar matrix absorbs the loading increment by self-stiffening: the quicker the loading the faster the fibril stiffening until the upper elastic loading limit is reached. This self-protective mechanism prevents cartilage from damage since the fibrils are strong in tension. The present work demonstrates the ability of the fibril reinfored poroelastic models to describe the strain rate dependent behavior of articular cartilage in unconfined compression using a mechanism of fibril stiffening mainly induced by the fluid flow.     

Spontaneous Curvature,Differential Stress,and Bending Modulus of Asymmetric Lipid Membranes

Lipid bilayers can exhibit asymmetric states, in which the physical characteristics of one leaflet differ from those of the other. This most visibly manifests in a different lipid composition, but it can also involve opposing lateral stresses in each leaflet that combine to an overall vanishing membrane tension. Here, we use theoretical modeling and coarse-grained simulation to explore the interplay between a compositional asymmetry and a nonvanishing differential stress. Minimizing the total elastic energy leads to a preferred spontaneous curvature that balances torques due to both bending moments and differential stress, with sometimes unexpected consequences. For instance, asymmetric flat bilayers, whose specific areas in each leaflet are matched to those of corresponding tensionless symmetric flat membranes, still exhibit a residual differential stress because the conditions of vanishing area strain and vanishing bending moment differ. We also measure the curvature rigidity of asymmetric bilayers and find that a sufficiently strong differential stress, but not compositional asymmetry alone, can increase the bending modulus. The likely cause is a stiffening of the compressed leaflet, which appears to be related to its gel transition but not identical with it. We finally show that the impact of cholesterol on differential stress depends on the relative strength of elastic and thermodynamic driving forces: if cholesterol solvates equally well in both leaflets, it will redistribute to cancel both leaflet tensions almost completely, but if its partitioning free energy prefers one leaflet over the other, the resulting distribution bias may even create differential stress. Because cells keep most of their lipid bilayers in an asymmetric nonequilibrium steady state, our findings suggest that biomembranes are elastically more complex than previously thought: besides a spontaneous curvature, they might also exhibit significant differential stress, which could strongly affect their curvature energetics.     

Constitutive behavior of ocular tissues over a range of strain rates

The constitutive behavior of bovine scleral and corneal tissues is measured in tension and compression, at quasi-static and moderate strain rates. Experiments are conducted at strain rates up to about 50 strain per second by a pneumatic testing system developed to overcome noise and measurement difficulties associated with the time dependent test of low impedance materials. Results for the tissues at room and the natural bovine body temperatures are similar and indicate that ocular tissue exhibits nonlinear stiffening for increasing strain rates, a phenomena termed rate hardening. For example, at a tensile strain rate of 29/s, corneal tissue is found to develop 10 times the stress that it does quasi-statically at the same strain. Thus, conventional constitutive models will grossly underpredict stresses occurring in the corneo-scleral shell due to moderate dynamic events. This has implication to the accuracy of ocular injury models, the study of the stress field in the corneo-scleral shell for glaucoma research and tonometry measurements. The measured data at various strain rates is represented using the general framework of a constitutive model that has been used to represent biological tissue mechanical data. Here it is extended to represent the measured data of the ocular tissues over the range of tested strain rates. Its form allows for straightforward incorporation in various numerical codes. The experimental and analytical methods developed here are felt to be applicable to the test of human ocular tissue.     

Differential Responses of Nitrogen-Fixing Cyanobacteria to Salinity and Osmotic Stresses

Two nitrogen-fixing Anabaena strains were found to be differentially tolerant to salinity and osmotic stresses. Anabaena torulosa, a brackish-water, salt-tolerant strain, was relatively osmosensitive. Anabaena sp. strain L-31, a freshwater, salt-sensitive strain, on the other hand, displayed significant osmotolerance. Salinity and osmotic stresses affected nitrogenase activity differently. Nitrogen fixation in both of the strains was severely inhibited by the ionic, but not by the osmotic, component of salinity stress. Such differential sensitivity of diazotrophy to salinity-osmotic stresses was observed irrespective of the inherent tolerance of the two strains to salt-osmotic stress. Exogenously added ammonium conferred significant protection against salinity stress but was ineffective against osmotic stress. Salinity and osmotic stresses also affected stress-induced gene expression differently. Synthesis of several proteins was repressed by salinity stress but not by equivalent or higher osmotic stress. Salinity and osmotic stresses induced many common proteins. In addition, unique salt stress- or osmotic stress-specific proteins were also induced in both strains, indicating differential regulation of protein synthesis by the two stresses. These data show that cyanobacterial sensitivity and responses to salinity and osmotic stresses are distinct, independent phenomena.     

Quantification of the Effects of Salt Stress and Physiological State on Thermotolerance of Bacillus cereus ATCC 10987 and ATCC 14579

The food-borne pathogen Bacillus cereus can acquire enhanced thermal resistance through multiple mechanisms. Two Bacillus cereus strains, ATCC 10987 and ATCC 14579, were used to quantify the effects of salt stress and physiological state on thermotolerance. Cultures were exposed to increasing concentrations of sodium chloride for 30 min, after which their thermotolerance was assessed at 50°C. Linear and nonlinear microbial survival models, which cover a wide range of known inactivation curvatures for vegetative cells, were fitted to the inactivation data and evaluated. Based on statistical indices and model characteristics, biphasic models with a shoulder were selected and used for quantification. Each model parameter reflected a survival characteristic, and both models were flexible, allowing a reduction of parameters when certain phenomena were not present. Both strains showed enhanced thermotolerance after preexposure to (non)lethal salt stress conditions in the exponential phase. The maximum adaptive stress response due to salt preexposure demonstrated for exponential-phase cells was comparable to the effect of physiological state on thermotolerance in both strains. However, the adaptive salt stress response was less pronounced for transition- and stationary-phase cells. The distinct tailing of strain ATCC 10987 was attributed to the presence of a subpopulation of spores. The existence of a stable heat-resistant subpopulation of vegetative cells could not be demonstrated for either of the strains. Quantification of the adaptive stress response might be instrumental in understanding adaptation mechanisms and will allow the food industry to develop more accurate and reliable stress-integrated predictive modeling to optimize minimal processing conditions.     

Emmental Cheese Environment Enhances Propionibacterium freudenreichii Stress Tolerance

Dairy propionibacteria are actinomycetales found in various fermented food products. The main species, Propionibacterium freudenreichii, is generally recognized as safe and used both as probiotic and as cheese starter. Its probiotic efficacy tightly depends on its tolerance towards digestive stresses, which can be largely modulated by the ingested delivery vehicle. Indeed, tolerance of this bacterium is enhanced when it is consumed within a fermented dairy product, compared to a dried probiotic preparation. We investigated both stress tolerance and protein neosynthesis upon growth in i) chemically defined or ii) aqueous phase of Emmental cheeses. Although the same final population level was reached in both media, a slower growth and an enhanced survival of CIRM BIA 1 strain of P. freudenreichii subsp. shermanii was observed in Emmental juice, compared to chemically defined medium. This was accompanied by differences in substrates used and products released as well as overexpression of various early stress adaptation proteins in Emmental juice, compared to chemically defined medium, implied in protein folding, in aspartate catabolism, in biosynthesis of valine, leucine and isoleucine, in pyruvate metabolism in citrate cycle, in the propionate metabolism, as well as in oxidoreductases. All these changes led to a higher digestive stress tolerance after growth in Emmental juice. Mechanisms of stress adaptation were induced in this environment, in accordance with enhanced survival. This opens perspectives for the use of hard and semi-hard cheeses as delivery vehicle for probiotics with enhanced efficacy.     

Two Fundamental Mechanisms Govern the Stiffening of Cross-linked Networks

Biopolymer networks, such as those constituting the cytoskeleton of a cell or biological tissue, exhibit a nonlinear strain-stiffening behavior when subjected to large deformations. Interestingly, rheological experiments on various in vitro biopolymer networks have shown similar strain-stiffening trends regardless of the differences in their microstructure or constituents, suggesting a universal stiffening mechanism. In this article, we use computer simulations of a random network comprised of cross-linked biopolymer-like fibers to substantiate the notion that this universality lies in the existence of two fundamental stiffening mechanisms. After showing that the large strain response is accompanied by the development of a stress path, i.e., a percolating path of axially stressed fibers and cross-links, we demonstrate that the strain stiffening can be caused by two distinctly different mechanisms: 1) the pulling out of stress-path undulations; and 2) reorientation of the stress path. The former mechanism is bending-dominated and can be recognized by a power-law dependence with exponent 3/2 of the shear modulus on stress, whereas the latter mechanism is stretching-dominated and characterized by a power-law exponent 1/2. We demonstrate how material properties of the constituents, as well as the network microstructure, can affect the transition between the two stiffening mechanisms and, as such, control the dominant power-law scaling behavior.     

PSPDB: Plant Stress Protein Database

Plants produce various proteins to overcome biotic and abiotic stresses. Current plant stress databases report plant genes without protein annotations specific to these stresses. To date, according to our findings, a unique plant stress protein database for both biotic and abiotic stresses is not available explicitly for plant biologists that describe linking out to other related databases. This need initiated us to formulate a distinctive database that includes important resources for stress-based factors. We developed the Plant Stress Protein Database (PSPDB), a web-accessible resource that covers 2,064 manually curated plant stress proteins from a wide array of 134 plant species with 30 different types of biotic and abiotic stresses. Functional and experimental validation of proteins associated with biotic and abiotic stresses has been employed as the sole criterion for inclusion in the database. The database is available at http://www.bioclues.org/pspdb/.