Glass fibre reinforced acrylic resin complete dentures: a 5-year clinical study

doi: 10.1111/j.1741‐2358.2010.00385.x Glass fibre reinforced acrylic resin complete dentures: a 5‐year clinical study Background and objectives: The aim of the study was to establish the wear resistance of the glass fiber reinforced complete dentures comparative to the traditional acrylic complete dentures. Materials and methods: Complete new dentures were made to replace old fractured ‘un’‐reinforced acrylic dentures. The total number of dentures was 30 and woven E‐glass fibre reinforcements were used in maxillary complete dentures. Unidirectional E‐glass fibre reinforcements were used as partial fibre reinforcements in mandibular complete dentures. Ten complete acrylic un‐reinforced dentures were used as control. The follow‐up period was 5 years and the recalls were made at 6 months. Results: After 5 years of wearing the new dentures, the control dentures suffered seven fractures. After 5 years all the mandibular reinforced dentures were in good shape. The maxillary complete reinforced dentures suffered four partial fractures. Fracture lines were restricted by the glass fibre net and the patients could still use their dentures. Conclusion: Pre‐impregnated E‐glass fibre nets and polymer pre‐impregnated E‐glass unidirectional fibres are useful in reinforcing acrylic resin complete dentures especially were heavy occlusal forces are involved. Glass fibre reinforcement will be applied on the tension side in both cases (total fibre reinforcement and partial fibre reinforcement). The reinforcement cannot replace the necessary linings and occlusal adjustments.     

Dentofacial pattern of two Jewish ethnic groups compared with accepted norms

The population of immigrant communities is often composed of various ethnic groups who may differ in their dentofacial pattern. The objective of this study was to define the dentofacial pattern of Jewish adolescents of Kurdish origin, and to compare it with another ethnic group and with accepted cephalometric norms. Lateral cephalograms of 20 individuals of both sexes, aged 11–13 years, with normal occlusion in the early permanent dentition, were chosen from the Jerusalem Growth Study material. The cephalograms were traced twice and were processed by means of a computer aided cephalometric program. Downs' as well as some other common cephalometric measurements were used for the analyses. Several comparisons were made: a) with an Ashkenazi (East-European Jewish) group; b) with the findings on non-Jewish Iranian youths of similar geographic background as our Kurdish group; c) with classical cephalometric standards. Close similarity was found with the Ashkenazi group and almost identical pattern of the non-Jewish Iranian youths of similar geographic background. The comparison with the classical cephalometric standards indicated a higher FMA, a more convex profile, accompanied by a mild skeletal Class II tendency and mandibular incisor proclination in our sample. Therefore it stands to reason that the classical North American cephalometric standards for its white population are not applicable in their totality for the clinical evaluation of the two Jewish ethnic groups examined. Thus establishment of specific norms for specific groups within a heterogeneous community is indicated. In addition, a tendency to accept a more convex profile as normal, as apparent from the review of the contemporary orthodontic literature, may suggest the desirability for a revision of the accepted strict norms for a harmonious dentofacial pattern. Based on a thesis submitted to the graduate faculty, Hebrew University, in partial fulfillment of the requirements for the DMD degree.     

Progression of facial asymmetry in hemifacial microsomia

Hemifacial microsomia is a common craniofacial anomaly, variably affecting structures derived from the first and second pharyngeal arches. Correction of the skeletal deformity in children has been advocated to improve growth potential and reduce secondary deformity. However, contrary reports have suggested that facial asymmetry in hemifacial microsomia does not increase with growth; therefore, skeletal correction can be postponed, even until adolescence. The purpose of this study was to test the hypothesis that facial asymmetry in hemifacial microsomia is progressive. This is a retrospective evaluation of 67 patients with untreated hemifacial microsomia. The patients were categorized as: group I (mandible type I, IIa), n = 38, and group II (mandible type IIb, III), n = 29. Pretreatment posterior-anterior cephalometric radiographs were used to analyze asymmetry by measuring the angle between the true horizontal and the following planes: piriform rim, maxillary occlusal plane, and intergonial angle. Angular measurements were averaged for patients in the deciduous (<6 years), mixed (> or =6<13 years), and permanent dentition (> or =13 years). In group I, angle piriform rim, maxillary occlusal plane, and intergonial angle increased from 7.0, 4.3, and 4.4 to 8.4, 6.6, and 6.1 degrees, respectively [mean age, 4.1 (deciduous) to 8.6 (mixed) to 21.0 (permanent) years]. In group II, angle piriform rim, maxillary occlusal plane, and intergonial angle increased from 9.5, 6.2, and 5.3 to 11.7, 7.6, and 8.0 degrees, respectively [mean age, 3.4 (deciduous) to 8.0 (mixed) years]. These data demonstrate that hemifacial microsomia is progressive and underscores the importance of early surgical correction of mandibular asymmetry in this disorder.     

Factors influencing the anterior component of occlusal force

We hypothesized that the anterior component of occlusal force (ACF) generated by mandibular molars was a function of molar inclination, height of the transverse condylar axis above the occlusal plane, steepness of the occlusal plane, gape, molar root dimensions, interproximal tooth contact force when not biting, and bite force. Our research aim was to identify those biomechanical factors which determine ACF. Mandibular second molars were axially loaded with a 90 N force (10 mm second molar gape) in 15 subjects, and the resulting ACF was measured at the mandibular first molar-second premolar contact using a recording technique based on interproximal frictional forces. Morphologic measurements were obtained from lateral cephalometric radiographs of each subject and included: Frankfort mandibular plane angle, occlusal plane angle, angles formed by the longitudinal axis of the second molar and the occlusal and mandibular planes, perpendicular distance from the top of the condyle to the occlusal plane, and second molar root width and root length. For ten subjects, ACF resulting from axial loads of 50, 100, 150, and 200 N was measured. For ten subjects, ACF resulting from an axial load of 50 N and second molar gapes of 10 mm, 14 mm, 18 mm, and 22 mm were measured. ACF increased with increasing gape and increased proportionally to increasing bite force. Correlation and stepwise regression analyses revealed that ACF varies with interproximal tooth contact force when not biting (contact ‘tightness’) and molar root width (model R² = 0.71, p < 0.01). The hypothesis that ACF is a function of bite force, gape, molar root width, and interproximal contact tightness has been supported, and the hypothesis that ACF is a function of molar inclination, occlusal plane steepness, condylar axis height, and root length was rejected.     

Brief communication: A morphometric analysis of the neandertal upper second molar leuca I

The scarcity of Neandertal remains from Southern Europe hampers our understanding of Neandertal variability, and can bias interpretations about Neandertal geographic variation. To address this issue, it is often important to reassess human remains that, while discovered decades ago, remain relatively unknown to the scientific community. In this contribution, we provide a complete state‐of‐the‐art comparative morphometric analysis of Leuca I, an unworn left second upper molar (LM²) discovered in 1958 in Bambino's Cave (near Santa Maria di Leuca, Apulia, Italy) and attributed to Homo neanderthalensis. Our study includes comparisons of standard metric and nonmetric data, a 2D image analysis of the occlusal surface and measurements of both 2D and 3D enamel thickness and dental tissue proportions. Although Leuca I follows the Neandertal M²s trend in some morphometric aspects (i.e., small relative occlusal polygon area), in other cases it falls to the higher end (for 3D average enamel thickness) or even outside (for 3D‐relative enamel thickness) the Neandertal M² variability, thus increasing the known Neandertal range of variation. Am J Phys Anthropol 152:300–305, 2013. © 2013 Wiley Periodicals, Inc.     

Direct restorative treatment of anterior weared teeth after re‐establishment of occlusal vertical dimension: a case report

doi: 10.1111/j.1741‐2358.2012.00630.x Direct restorative treatment of anterior weared teeth after re‐establishment of occlusal vertical dimension: a case report Objective: The loss of posterior teeth resulting in a lack of stability may lead to excessive mandibular load on some points of occlusion of the remaining teeth, causing wear. The rehabilitation of these cases must be carefully planned and the treatment requires a period of adaptation with a new vertical dimension. Background: This case report describes the treatment of a patient with a loss of almost all posterior inferior teeth and a consequential loss of occlusal vertical dimension and accentuated wear of anterior elements. Materials and methods: Provisional removable partial dentures were manufactured and the patient used them for a period of adaptation prior to restoration of the anterior teeth. After the patient’s adaptation with the new occlusal dimension, anterior restorations were made using a mycrohibrid resin composite with different color aspects for an optimal stratification. Results: The restorations achieved an aesthetic configuration with ideal function as the final result and the occlusion showed a satisfactory stability for a provisional removable partial dentures. Conclusion: This article presents an anterior direct rehabilitation approach not only as an alternative option, but also as viable and less expensive treatment option with an optimally aesthetic and functional result.     

Electromyographic evaluation of masseter and anterior temporalis muscles in rest position of edentulous patients with temporomandibular disorders, before and after using complete dentures with sliding plates

Objectives: This study was performed with the purpose of investigating electromyographic (EMG) activity of the anterior temporalis and masseter muscles in edentulous individuals with temporomandibular disorder (TMD), before and after using sliding plates on complete dentures in the mandibular rest position. Background: Edentulous patients may present TMD, which is characterised by pain in temporomandibular joints, masticatory and neck muscles, uncoordinated and limited mandible movements, joint sounds and an altered occlusal relationship. It is imperative to offer treatment in order to re‐establish stomatognathic system structures before submitting the individual to any definitive restorative treatment. Materials and methods: The patients were edentulous for at least 10 years. EMG recordings were made before the insertion of the dentures (0 months) and also after using the sliding plates at the fourth month, 9th month and 12th month, using computerised electromyography K6‐I/ EMG Light Channel Surface. EMG evaluations of the muscles were performed under the following clinical conditions: rest position with dentures (R1), rest position without dentures (R2), rest position with dentures post‐activity (chewing) (R3), rest position without dentures post‐activity (chewing) (R4). Results: All patients obtained remission of muscular fatigue and reduced pain in stomatognathic system structures. Temporalis muscle showed significant increase in EMG activity compared with initial values (p < 0.01). Masseter muscles showed significantly lower mean values (p < 0.01) compared with initial values. Conclusion: The sliding plates allowed the process of neuromuscular deprogramming, contributing to muscular balance of the masticatory system, and are therefore indicated to be used before the fabrication of definitive complete dentures in patients with TMD.     

The masticatory handicap of wearing removable dentures in elderly men

Objective: This study aimed at describing the masticatory handicap of wearing removable dentures measured by some masticatory tests and the intake of hard and soft foods. Materials and methods: The subjects were participants in a comprehensive health examination of 67–68‐year‐old men living in Malmö, Sweden. Four hundred eighty‐three men took part in a clinical oral examination which recorded the number of teeth and removable dentures. One hundred and one had complete dentures in both jaws and 131 had removable partial dentures in different combinations. Masticatory tests used almonds to record the number of stokes to the first swallow, and two‐coloured chewing gums for recording bolus kneading and shaping. A nutritionist paid a home visit to assess dietary habits including the consumption of hard and soft foods. The data could be split into groups of different tooth and denture situations which were large enough to enable statistical analysis to be carried out. The results of a regression analysis of the group with different numbers of natural teeth (NT) and no removable dentures could be used as a reference for correlation with the masticatory capacity of removable denture wearers. Results: Number of strokes to the first swallow revealed no masticatory limitations of wearing removable dentures, while chewing gum colour‐mixing and shaping revealed more differentiated impairments equivalent to the function of five to 16 teeth in a remaining natural dentition. Hard food intake for the removable denture groups was comparable to 17–19 NT. Soft food intake was not influenced by denture wearing. In a ranking of oral conditions, those with more than 24 NT had the highest test values for all tests, and those with complete sets of dentures the lowest except for the number of strokes to the first swallow of an almond. Conclusion: Removable denture wearing can be regarded as a handicap when measured with objective masticatory tests using chewing gum and the intake of hard foods. The number of chewing strokes to the first swallow of an almond and the intake of soft foods is not affected by the wearing of removable dentures.     

Micro‐CT evaluation of murine fetal skeletal development yields greater morphometric precision over traditional clear‐staining methods

Traditional techniques for quantification of murine fetal skeletal development (gross measurements, clear‐staining) are severely limited by specimen processing, soft tissue presence, diffuse staining, and unclear landmarks between which to make measurements. Nondestructive microcomputed tomography (micro‐CT) imaging is a versatile, well‐documented tool traditionally used to generate high‐resolution 3‐D images and quantify microarchitectural parameters of trabecular bone. Although previously described as a tool for phenotyping fetal murine specimens, micro‐CT has not previously been used to directly measure individual fetal skeletal structures. Imaging murine fetal skeletons using micro‐CT enables the researcher to nondestructively quantify fetal skeletal development parameters including limb length, total bone volume, and average bone mineral density, as well as identify skeletal malformations. Micro‐CT measurement of fetal limb lengths correlates well with traditional clear‐staining methods (83.98% agreement), decreases variability in measurements (average standard errors: 6.28% for micro‐CT and 10.82% for clear‐staining), decreases data acquisition time by eliminating the need for tissue processing, and preserves the intact fixed fetus for further analysis. Use of the rigorous micro‐CT technique to generate 3‐D images for digital measurement enables isolation of skeletal structures based on degree of mineralization (local radiodensity), eliminating the complications of blurred stain boundaries and soft tissue inclusion that accompany clear‐staining and gross measurement techniques. Microcomputed tomography provides a facile, accurate, and nondestructive method for determining the developmental state of the fetal skeleton using not only limb lengths and identification of malformations, but total skeletal bone volume and average skeletal mineral density as well. Birth Defects Res (Part B) 2008. © 2008 Wiley‐Liss, Inc.     

Clinical and microbiological efficacy of three different treatment methods in the management of denture stomatitis

Gerodontology 2010; doi: 10.1111/j.1741‐2358.2009.00354.x
Clinical and microbiological efficacy of three different treatment methods in the management of denture stomatitis Objective: This study evaluated. the effect of mouthrinses and tissue conditioner on the clinical findings and microbial flora of 60 patients with Newton’s type II denture stomatitis (N2DS) Background: Denture stomatitis is a common problem in complete denture wearers. Materials and methods: Sixty patients with N2DS were included in this study and divided into three groups. Two groups of patients were instructed to rinse their mouth with the designated mouthrinses DioxiDent and Corsodyl twice daily for 1 min and to soak their dentures overnight in these solutions for 15 days. For the third group, tissue conditioner was placed in each of 20 patients’ existing maxillary dentures. Patients were evaluated both clinically and microbiologically at baseline and after 15 days. Palatal swabs and smears were taken from each patient before and after treatment and these samples were examined mycologically. The difference between Candida colonisation before and after treatment and the differences between pre‐treatment and post‐treatment clinical findings were assessed. Results: DioxiDent and Corsodyl showed an improvement in palatal inflammation and a decrease in Candida colonisation compared to Visco‐gel. Conclusions: The effectiveness of topical chlorine dioxide and chlorhexidine gluconate in the management of N2DS was demonstrated.     

Presurgical planning and time efficiency in orthognathic surgery: the use of computer-assisted surgical simulation

Orthognathic procedures require extensive preoperative planning to maintain high fidelity of fabricated splints to anticipated skeletal and soft tissue changes. The authors report their use of the computer-assisted surgical simulation modeling system in preoperative planning and splint fabrication and the significant reduction in their overall preoperative time. Upper and lower bite registrations were sequentially created on a single bite jig with fast-drying bis-acryl material, which was then mounted to a fiducial-based facebow for facial skeleton indexing. Indexing data were submitted, and occlusal splints were fashioned and returned to the senior surgeon. Between September 2010 and January 2011, 10 consecutive patients were enrolled. Surgical indications included six Le Fort I advancements and four combined Le Fort I/bilateral sagittal split osteotomy cases. Average time for bite registration was 10 minutes 16 seconds ± 1 minute 33 seconds, with an additional 8 minutes 6 seconds ± 4 minutes 45 seconds needed for modeling and virtual splint confirmation. Six patients required cephalometric tracings, for an additional 12 minutes 50 seconds ± 1 minute 10 seconds. Average total session time for all patients was 26 minutes 14 seconds ± 9 minutes 13 seconds. Computer-assisted surgical simulation markedly decreased the time for preoperative splint planning and fabrication time, and had a positive impact on reimbursement rates for orthognathic surgery, as calculated on a per-hourly basis. The improved accuracy generated may lead to decreased operative times and improved outcomes. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.     

Two-dimensional finite element analysis of stresses developed in the supporting tissues under complete dentures using teeth with different cusp angulations

Statement of problem: The selection of appropriate teeth for complete denture occlusion is very important for long‐term success, and adequate maintenance of the residual alveolar ridge. Purpose: The purpose of this study was to determine the stress generated underneath the complete denture by altering the cuspal angulations of the denture teeth. Material and methods: A two‐dimensional finite element model of a coronal section of maxillary and mandibular complete dentures, mucosa and alveolar bone in the first molar region was designed. The occlusal aspect of the denture teeth was altered to make 33°, 20°, 0° cuspal angulation. All the nodes at the bases of maxillary and mandibular alveolar bone of finite element analysis models were restrained in all directions. A functional occlusal load of 50 N was applied through the mandibular model base. To design these models and to analyse them, EMRC’s NISA II finite element analysis computer software was used. In these models, the elements were selected (a, b, c, d, e, f) in the region where it was necessary to determine the stresses generated in both the maxillary and mandibular portions. Results: The results were interpreted as Von Mises stresses and were observed in pre‐defined areas. The stress patterns observed within model with each type of posterior occlusion, showed unique variations as well as some similarities. Conclusion: Stresses of greater magnitude were observed in cuspal teeth, 33° and 20° respectively, where as 0° teeth showed a slightly less magnitude of stress generated.     

Surgical and prosthetic treatment in an elderly patient affected by unilateral idiopathic gingival fibromatosis: a case report

doi: 10.1111/j.1741‐2358.2011.00564.x Surgical and prosthetic treatment in an elderly patient affected by unilateral idiopathic gingival fibromatosis: a case report Objectives: The aim was to present the diagnosis and treatment of a case of unilateral idiopathic gingival fibromatosis (IGF) in a geriatric patient. Background: IGF is a rare condition characterised by an enlargement of the attached and marginal gingivae with no obvious association to any causative factor. Gingival overgrowth causes inaesthetic changes and clinical symptoms such as speech disturbances, tooth movement, and occlusal problems. Materials and methods: A 65‐year‐old female presented localised enlargement of mandibular gingiva, malpositioning of anterior mandibular teeth, and difficulty in speech and mastication. IGF also causes numerous aesthetic and psychological problems. Treatment consisted of multiple extractions, surgical therapy, and early prosthetic rehabilitation to restore function and appearance and to prevent recurrence. Results: Excellent aesthetic result and psychological benefit were achieved, and no fibromatosis recurrence was detected after 1 year following surgery. Conclusion: Gingival resection of the tissue excess and early oral rehabilitation with removable dentures have so far greatly improved patient’s quality of life.     

Evaluation of the occlusion vertical dimension of complete dentures after microwave disinfection

doi: 10.1111/j.1741‐2358.2011.00567.x Evaluation of the occlusion vertical dimension of complete dentures after microwave disinfection Objectives: An increase in occlusal vertical dimension (OVD) after microwave disinfection may result in the need for adjustments in the complete dentures. This in vitro study evaluated the increase in OVD of maxillary complete dentures submitted to microwave disinfection protocols. Material and methods: Thirty sets of complete dentures were evaluated as follows: Group 1–15 sets had the maxillary complete dentures submitted to microwave disinfection (650 W/3 min), once a week, for 4 weeks. Group 2–15 sets had the maxillary complete dentures submitted to microwave disinfection (650 W/3 min), three times a week, for 4 weeks. The vertical dimension was measured with a micrometre (in mm) before disinfection protocols (baseline readings) and after each week of disinfection. Data were analysed using Wilcoxon and Friedman tests (α = 0.05). Results: For Group 1, no significant difference was found between the increases in OVD and zero, and no significant difference was found between the weeks. For Group 2, the increases in OVD were significantly greater than zero, and the Friedman test showed that weeks 3 and 4 had significantly greater changes than week 1 and that week 4 had significantly greater change than week 2. Conclusion: Microwave disinfection only promoted significant increase in OVD in Group 2, in which the values increased progressively.     

Vitamin D3 and calcium cosupplementation alleviates cadmium hepatotoxicity in the rat: Enhanced antioxidative and anti‐inflammatory actions by remodeling cellular calcium pathways

Although vitamin D (VD) and calcium (Ca) attenuate cadmium (Cd) metabolism, their combined antioxidant and anti‐inflammatory actions against Cd toxicity have not been previously explored. Hence, this study measured the protective effects of VD ± Ca supplements against Cd hepatotoxicity. Forty adult male rats were distributed to: negative controls (NCs), positive controls (PCs), VD, Ca, and VD₃ and Ca (VDC) groups. All groups, except NC, received CdCl₂ in drinking water (44 mg/L) for 4 weeks individually or concurrently with intramuscular VD₃ (600 IU/kg; three times per week) and/or oral Ca (100 mg/kg; five times per week). The PC group showed abnormal hepatic biochemical parameters and increase in cellular cytochrome C, caspase‐9, and caspase‐3 alongside the apoptotic/necrotic cell numbers by terminal deoxynucleotidyl transferase dUTP nick end labeling technique. The PC hepatic tissue also had substantially elevated pro‐oxidants (malondialdehyde [MDA]/H₂O₂/protein carbonyls) and inflammatory cytokines (interleukin 1β [IL‐1β]/IL‐6/IL17A/tumor necrosis factor‐α), whereas the anti‐inflammatory (IL‐10/IL‐22) and antioxidants (glutathione [GSH]/GPx/catalase enzyme [CAT]) markers declined. Hypovitaminosis D, low hepatic tissue Ca, aberrant hepatic expression of VD‐metabolizing enzymes (Cyp2R1/Cyp27a1/cyp24a1), receptor and binding protein alongside Ca‐membrane (Ca_V1.1/Ca_V3.1), and store‐operated (RyR1/ITPR1) channels, and Ca‐binding proteins (CAM/CAMKIIA/S100A1/S100B) were observed in the PC group. Both monotherapies decreased serum, but not tissue Cd levels, restored the targeted hepatic VD/Ca molecules' expression. However, these effects were more prominent in the VD group than the Ca group. The VDC group, contrariwise, disclosed the greatest alleviations on serum and tissue Cd, inflammatory and oxidative markers, the VD/Ca molecules and tissue integrity. In conclusion, this report is the first to reveal boosted protection for cosupplementing VD and Ca against Cd hepatotoxicity that could be due to enhanced antioxidative, anti‐inflammatory, and modulation of the Ca pathways.     

Cephalometric study of elderly with nearly intact dental arches

Objective: The purpose of this study was to investigate the craniofacial morphology of elderly people with many remaining teeth using cephalometric analysis. Subjects and methods: The subjects were 30 Japanese elderly who participated in the ‘8020 campaign 2001’ in Bunkyo Ward, Tokyo, organised by The Dental Association of Tokyo, as well as 30 Japanese young adults with normal occlusion. Lateral cephalograms of all subjects were analysed using the Coben method. Results: In the female elderly group, the lower face depth was smaller than in the younger adults. In the male elderly group, the height and depth of both the total face and the lower face were longer than in the younger group. In comparing the 8020 achievers with the younger group, the proportion of the lower facial height was greater than the upper facial height, and this finding was more pronounced in women than in men. Conclusion: For the lateral facial pattern of the elderly, a reduction of lower facial height because of tooth occlusal reduction was not apparent. It was clear that there are age differences for males and females; in addition, differences in the total face and lower face area of the elderly group were due to their having many remaining teeth over a long time period. Also, these changes were more apparent in women than in men, and it is clear that there is a male–female difference in ageing.     

Finite element,occlusal, microwear and microstructural analyses indicate that conodont microstructure is adapted to dental function

Conodonts constitute the earliest evidence of skeletal biomineralization in the vertebrate evolutionary lineage, manifest as a feeding apparatus of tooth‐like elements comprised of enamel‐ and dentine‐like tissues that evolved in parallel with these canonical tissues in other total‐group gnathostomes. As such, this remarkable example of evolutionary parallelism affords a natural experiment in which to explore the constraints on vertebrate skeletal evolution. Using finite element analysis, informed by occlusal and microwear analyses, we tested the hypothesis that coincidence of complex dental function and microstructural differentiation in the enamel‐like tissues of conodonts and other vertebrates is a consequence of functional adaptation. Our results show topological co‐variation in the patterns of stress distribution and crystallite orientation. In regions of high stress, such as the apex of the basal cavity and inner parts of the platform, the crown tissue comprises interwoven prisms, discontinuities between which would have acted to decussate cracks, preventing propagation. These results inform a general occlusal model for platform conodont elements and demonstrate that the complex microstructure of conodont crown tissue is an adaptation to the dental functions that the elements performed.     

Comparison between complete denture and implant‐retained overdenture: effect of different mucosa thickness and resiliency on stress distribution

Background: The effect of different mucosa characteristics on stress distribution of complete dentures and overdentures remains unknown. Objective: The aim of this study was to evaluate the effect of different mucosa thickness and resiliency on the stress distribution of complete dentures and implant‐retained overdentures using a two‐dimensional finite element analysis. Material and methods: Representative models of the edentulous mandible were constructed on AutoCAD software according to the groups’ characteristics. In group CD, a model of the edentulous mandible supporting a complete denture was obtained while in group IO, a model of edentulous mandible supporting an overdenture over two unsplinted implants with an o’ ring system was constructed. In each group, mucosa assumed three characteristics of thickness (1, 3 and 5 mm) corresponding to the resiliencies hard, resilient and soft respectively. Evaluation was performed on Ansys software with 100N vertical load applied on central incisor teeth. The principal stress was used as analysis criteria. Results: Group IO showed higher stress values than group CD regardless of mucosal thickness and resiliency. Stress decreased at the supporting tissues in both groups as the thickness and resiliency of mucosa increased. In relation to the supporting tissues, cortical bone showed the highest stress values. Conclusion: It was concluded that the use of an attachment system increases stress values and the thickness and resiliency of mucosa influence more on these values.     

In vivo biofilm formation on a soft denture liner in elderly patients with controlled diabetes

doi: 10.1111/j.1741‐2358.2010.00428.x In vivo biofilm formation on a soft denture liner in elderly patients with controlled diabetes Objectives: This in vivo study evaluated the influence of controlled diabetes on biofilm formation on a soft denture liner in elderly patients. Background: Soft denture lining materials are more susceptible to microbial colonisation than denture base acrylic resins. Especially in the elderly, several predisposing factors may accumulate leading to an increased probability of biofilm development that may result in candidiasis, a significant clinical oral disease. Materials and methods: Volunteers wearing complete dentures were divided into two groups (n = 20): diabetic patients with controlled glycaemia, and healthy patients. In both groups, a silicone‐based soft liner was placed in a recess created at the base of the maxillary dentures. Subjects cleaned the prosthesis three times a day. Biofilm formed on the liner was quantified at various time points (baseline, two, four and six weeks). Data were analysed by two‐way repeated measures anova and Tukey’s test (α = 0.05). Results: There was no statistical difference in biofilm formation for any of the time points between controlled diabetes patients and healthy patients. Conclusion: The results suggest that the control of diabetes in elderly patients provides the same levels of biofilm formation when compared to healthy individuals.